Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Engineering (164)
- Electrical and Computer Engineering (137)
- Plasma and Beam Physics (56)
- Engineering Physics (55)
- Materials Science and Engineering (36)
-
- Atomic, Molecular and Optical Physics (21)
- Optics (21)
- Condensed Matter Physics (17)
- Chemistry (16)
- Electronic Devices and Semiconductor Manufacturing (15)
- Computer Sciences (12)
- Quantum Physics (12)
- Semiconductor and Optical Materials (12)
- Electrical and Electronics (11)
- Electromagnetics and Photonics (11)
- Artificial Intelligence and Robotics (9)
- Nanoscience and Nanotechnology (9)
- Power and Energy (9)
- Nuclear (8)
- Biomedical Engineering and Bioengineering (7)
- Engineering Science and Materials (7)
- Fluid Dynamics (7)
- Medicine and Health Sciences (7)
- Physical Chemistry (6)
- Biomedical (5)
- Chemical Engineering (5)
- Applied Mathematics (4)
- Life Sciences (4)
- Keyword
-
- Electron diffraction (13)
- Thin films (10)
- Cavity (9)
- Cancer (8)
- Plasma (8)
-
- Laser pulses (7)
- Machine learning (7)
- Physics (7)
- SRF (7)
- Solar cells (7)
- Turbulence (7)
- Gallium arsenide (6)
- III-V semiconductors (6)
- Atomic force microscopy (5)
- Electric fields (5)
- Pulsed laser deposition (5)
- Pulsed lasers (5)
- Quantum theory (5)
- Reflection high energy electron diffraction (5)
- Spectroscopic ellipsometry (5)
- Surface structure (5)
- Algorithms (4)
- Atmospheric pressure (4)
- Boltzmann equation (4)
- Copper (4)
- Laser produced plasmas (4)
- Nanoparticles (4)
- Photocathodes (4)
- Photonic crystals (4)
- Plasma applications (4)
Articles 31 - 60 of 199
Full-Text Articles in Physics
Field Emission Migration In Cebaf Srf Cavities Using Deep Learning, K. Ahammed, J. Li, A. Carpenter, R. Suleiman, C. Tennant, L. Vidyaratne
Field Emission Migration In Cebaf Srf Cavities Using Deep Learning, K. Ahammed, J. Li, A. Carpenter, R. Suleiman, C. Tennant, L. Vidyaratne
Electrical & Computer Engineering Faculty Publications
The Continuous Electron Beam Accelerator Facility (CEBAF) operates hundreds of superconducting radio frequency (SRF) cavities in its two main linear accelerators. Field emission can occur when the cavities are set to high operating RF gradients and is an ongoing operational challenge. This is especially true in newer, higher gradient SRF cavities. Field emission results in damage to accelerator hardware, generates high levels of neutron and gamma radiation, and has deleterious effects on CEBAF operations. So, field emission reduction is imperative for the reliable, high gradient operation of CEBAF that is required by experimenters. Here we explore the use of deep …
Nb₃Sn Coating Of A 2.6 Ghz Srf Cavity By Sputter Deposition Technique, M. S. Shakel, Wei Cao, H. Elsayed-Ali, G. V. Eremeev, U. Pudasaini, A. M. Valente-Feliciano
Nb₃Sn Coating Of A 2.6 Ghz Srf Cavity By Sputter Deposition Technique, M. S. Shakel, Wei Cao, H. Elsayed-Ali, G. V. Eremeev, U. Pudasaini, A. M. Valente-Feliciano
Electrical & Computer Engineering Faculty Publications
Nb₃Sn is of interest as a coating for SRF cavities due to its higher transition temperature Tc ~18.3 K and superheating field Hsh ~400 mT, both are twice that of Nb. Nb₃Sn coated cavities can achieve high-quality factors at 4 K and can replace the bulk Nb cavities operated at 2 K. A cylindrical magnetron sputtering system was built, commissioned, and used to deposit Nb₃Sn on the inner surface of a 2.6 GHz single-cell Nb cavity. With two identical cylindrical magnetrons, this system can coat a cavity with high symmetry and uniform thickness. Using Nb-Sn multilayer sequential sputtering followed by …
Design Of A 10 Mev Beamline At The Upgraded Injector Test Facility For E-Beam Irradiation, Xi Li, Helmut Baumgart, Gianluigi Ciovati, F.E. Hannon, S. Wang
Design Of A 10 Mev Beamline At The Upgraded Injector Test Facility For E-Beam Irradiation, Xi Li, Helmut Baumgart, Gianluigi Ciovati, F.E. Hannon, S. Wang
Electrical & Computer Engineering Faculty Publications
Electron beam irradiation near 10 MeV is suitable for wastewater treatment. The Upgraded Injector Test Facility (UITF) at Jefferson Lab is a CW superconducting linear accelerator capable of providing an electron beam of energy up to 10 MeV and up to 100 µA current. This contribution presents the beam transport simulations for a beamline to be used for the irradiation of wastewater samples at the UITF. The simulations were done using the code General Particle Tracer with the goal of obtaining an 8 MeV electron beam of radius (3-σ) of ~2.4 cm. The achieved energy spread is ~74.5 keV. The …
Transient Behavior Of Drift And Ionization In Atmospheric Pressure Nitrogen Discharge, S. K. Dhali
Transient Behavior Of Drift And Ionization In Atmospheric Pressure Nitrogen Discharge, S. K. Dhali
Electrical & Computer Engineering Faculty Publications
The fluid models are frequently used to describe a non-thermal plasma such as a streamer discharge. The required electron transport data and rate coefficients for the fluid model are parametrized using the local field approximation (LFA) in first order models and the local-mean-energy approximation (LMEA) in second order models. We performed Monte Carlo simulations in Nitrogen gas with step changes in the E/N (reduced electric field) to study the behavior of the transport properties in the transient phase. During the transient phase of the simulation, we extract the instantaneous electron mean energy, which is different from the steady state mean …
Cylindrical Magnetron Development For Nb₃Sn Deposition Via Magnetron Sputtering, Md. Nizam Sayeed, Hani Elsayed-Ali, C. Côté, M. A. Farzad, A. Sarkissian, G. V. Eremeev, A-M. Valente-Feliciano
Cylindrical Magnetron Development For Nb₃Sn Deposition Via Magnetron Sputtering, Md. Nizam Sayeed, Hani Elsayed-Ali, C. Côté, M. A. Farzad, A. Sarkissian, G. V. Eremeev, A-M. Valente-Feliciano
Electrical & Computer Engineering Faculty Publications
Due to its better superconducting properties (critical temperature Tc~ 18.3 K, superheating field Hsh~ 400 mT), Nb3Sn is considered as a potential alternative to niobium (Tc~ 9.25 K, Hsh~ 200 mT) for superconducting radiofrequency (SRF) cavities for particle acceleration. Magnetron sputtering is an effective method to produce superconducting Nb3Sn films. We deposited superconducting Nb3Sn films on samples with magnetron sputtering using co-sputtering, sequential sputtering, and sputtering from a stoichiometric target. Nb3Sn films produced by magnetron sputtering in our previous experiments have achieved DC superconducting critical temperature up to …
Using Ai For Management Of Field Emission In Srf Linacs, A. Carpenter, P. Degtiarenko, R. Suleiman, C. Tennant, D. Turner, L. S. Vidyaratne, Khan Iftekharuddin, Md. Monibor Rahman
Using Ai For Management Of Field Emission In Srf Linacs, A. Carpenter, P. Degtiarenko, R. Suleiman, C. Tennant, D. Turner, L. S. Vidyaratne, Khan Iftekharuddin, Md. Monibor Rahman
Electrical & Computer Engineering Faculty Publications
Field emission control, mitigation, and reduction is critical for reliable operation of high gradient superconducting radio-frequency (SRF) accelerators. With the SRF cavities at high gradients, the field emission of electrons from cavity walls can occur and will impact the operational gradient, radiological environment via activated components, and reliability of CEBAF’s two linacs. A new effort has started to minimize field emission in the CEBAF linacs by re-distributing cavity gradients. To measure radiation levels, newly designed neutron and gamma radiation dose rate monitors have been installed in both linacs. Artificial intelligence (AI) techniques will be used to identify cavities with high …
High Voltage Design And Evaluation Of Wien Filters For The Cebaf 200 Kev Injector Upgrade, Gabriel Palacios-Serrano, Helmut Baumgart, C. Hernández-García, P. Adderley, J. Benesch, D. Bullard, J. Grames, A. Hofler, D. Machie, M. Poelker, M. Stutzman, R. Suleiman
High Voltage Design And Evaluation Of Wien Filters For The Cebaf 200 Kev Injector Upgrade, Gabriel Palacios-Serrano, Helmut Baumgart, C. Hernández-García, P. Adderley, J. Benesch, D. Bullard, J. Grames, A. Hofler, D. Machie, M. Poelker, M. Stutzman, R. Suleiman
Electrical & Computer Engineering Faculty Publications
High-energy nuclear physics experiments at the Jefferson Lab Continuous Electron Beam Accelerator Facility (CEBAF) require highly spin-polarization electron beams, produced from strained super-lattice GaAs photocathodes, activated to negative electron affinity in a photogun operating at 130 kV dc. A pair of Wien filter spin rotators in the injector defines the orientation of the electron beam polarization at the end station target. An upgrade of the CEBAF injector to better support the upcoming MOLLER experiment requires increasing the electron beam energy to 200 keV, to reduce unwanted helicity correlated intensity and position systematics and provide precise control of the polarization orientation. …
Reflection And Transmission Of Electromagnetic Pulses At A Planar Dielectric Interface: Theory And Quantum Lattice Simulations, Abhay K. Ram, George Vahala, Linda Vahala, Min Soe
Reflection And Transmission Of Electromagnetic Pulses At A Planar Dielectric Interface: Theory And Quantum Lattice Simulations, Abhay K. Ram, George Vahala, Linda Vahala, Min Soe
Electrical & Computer Engineering Faculty Publications
There is considerable interest in the application of quantum information science to advance computations in plasma physics. A particular point of curiosity is whether it is possible to take advantage of quantum computers to speed up numerical simulations relative to conventional computers. Many of the topics in fusion plasma physics are classical in nature. In order to implement them on quantum computers, it will require couching a classical problem in the language of quantum mechanics. Electromagnetic waves are routinely used in fusion experiments to heat a plasma or to generate currents in the plasma. The propagation of electromagnetic waves is …
The Resistive Barrier Discharge: A Brief Review Of The Device And Its Biomedical Applications, Mounir Laroussi
The Resistive Barrier Discharge: A Brief Review Of The Device And Its Biomedical Applications, Mounir Laroussi
Electrical & Computer Engineering Faculty Publications
This paper reviews the principles behind the design and operation of the resistive barrier discharge, a low temperature plasma source that operates at atmospheric pressure. One of the advantages of this plasma source is that it can be operated using either DC or AC high voltages. Plasma generated by the resistive barrier discharge has been used to efficiently inactivate pathogenic microorganisms and to destroy cancer cells. These biomedical applications of low temperature plasma are of great interest because in recent times bacteria developed increased resistance to antibiotics and because present cancer therapies often are accompanied by serious side effects. Low …
Simulation Studies On The Interactions Of Electron Beam With Wastewater, X. Li, S. Wang, Helmut Baumgart, G. Ciovati, F. Hannon
Simulation Studies On The Interactions Of Electron Beam With Wastewater, X. Li, S. Wang, Helmut Baumgart, G. Ciovati, F. Hannon
Electrical & Computer Engineering Faculty Publications
The manufactured chemical pollutants, like 1,4 dioxane and PFAS (per- and polyfluroralkyl substances), found in the underground water and/or drinking water are challenging to be removed or biodegraded. Energetic electrons are capable of mediating and removing them. This paper utilizes FLUKA code to evaluate the beam-wastewater interaction effects with different energy, space and divergence distributions of the electron beam. With 8 MeV average energy, the electron beam exits from a 0.0127 cm thick titanium window, travels through a 4.3 cm distance air and a second 0.0127 cm thick stainless water container window with 2.43 cm radius, and finally is injected …
Initial Studies Of Cavity Fault Prediction At Jefferson Laboratory, L.S. Vidyaratne, A. Carpenter, R. Suleiman, C. Tennant, D. Turner, Khan Iftekharuddin, Md. Monibor Rahman
Initial Studies Of Cavity Fault Prediction At Jefferson Laboratory, L.S. Vidyaratne, A. Carpenter, R. Suleiman, C. Tennant, D. Turner, Khan Iftekharuddin, Md. Monibor Rahman
Electrical & Computer Engineering Faculty Publications
The Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Laboratory is a CW recirculating linac that utilizes over 400 superconducting radio-frequency (SRF) cavities to accelerate electrons up to 12 GeV through 5-passes. Recent work has shown that, given RF signals from a cavity during a fault as input, machine learning approaches can accurately classify the fault type. In this paper we report on initial results of predicting a fault onset using only data prior to the failure event. A data set was constructed using time-series data immediately before a fault (’unstable’) and 1.5 seconds prior to a fault (’stable’) gathered …
Generation Of Excited Species In A Streamer Discharge, Shirshak K. Dhali
Generation Of Excited Species In A Streamer Discharge, Shirshak K. Dhali
Electrical & Computer Engineering Faculty Publications
At or near atmospheric pressure, most transient discharges, particularly in molecular gases or gas mixture containing molecular gases, result in a space charge dominated transport called a streamer discharge. The excited species generation in such discharges forms the basis for plasma chemistry in most technological applications. In this paper, we simulate the propagation of streamers in atmospheric pressure N2 to understand the energy partitioning in the formation of various excited species and compare the results to a uniform Townsend discharge. The model is fully two-dimensional with azimuthal symmetry. The results show a significantly larger fraction of the energy goes …
Rapid Quantification Of Biofouling With An Inexpensive, Underwater Camera And Image Analysis, Matthew R. First, Scott C. Riley, Kazi Aminul Islam, Victoria Hill, Jiang Li, Richard C. Zimmerman, Lisa A. Drake
Rapid Quantification Of Biofouling With An Inexpensive, Underwater Camera And Image Analysis, Matthew R. First, Scott C. Riley, Kazi Aminul Islam, Victoria Hill, Jiang Li, Richard C. Zimmerman, Lisa A. Drake
Electrical & Computer Engineering Faculty Publications
To reduce the transport of potentially invasive species on ships' submerged surfaces, rapid-and accurate-estimates of biofouling are needed so shipowners and regulators can effectively assess and manage biofouling. This pilot study developed a model approach for that task. First, photographic images were collected in situ with a submersible, inexpensive pocket camera. These images were used to develop image processing algorithms and train machine learning models to classify images containing natural assemblages of fouling organisms. All of the algorithms and models were implemented in a widely available software package (MATLAB©). Initially, an unsupervised clustering model was used, and three …
Tri-Molybdenum Phosphide (Mo3P) And Multi-Walled Carbon Nanotube Junctions For Volatile Organic Compounds (Vocs) Detection, Baleeswaraiah Muchharla, Praveen Malali, Brenna Daniel, Alireza Kondori, Mohammad Asadi, Wei Cao, Hani E. Elsayed-Ali, Mickaël Castro, Mehran Elahi, Adetayo Adedeji, Kishor Kumar Sadasivuni, Muni Raj Mauya, Kapil Kumar, Abdennaceur Karoui, Bijandra Kumar
Tri-Molybdenum Phosphide (Mo3P) And Multi-Walled Carbon Nanotube Junctions For Volatile Organic Compounds (Vocs) Detection, Baleeswaraiah Muchharla, Praveen Malali, Brenna Daniel, Alireza Kondori, Mohammad Asadi, Wei Cao, Hani E. Elsayed-Ali, Mickaël Castro, Mehran Elahi, Adetayo Adedeji, Kishor Kumar Sadasivuni, Muni Raj Mauya, Kapil Kumar, Abdennaceur Karoui, Bijandra Kumar
Electrical & Computer Engineering Faculty Publications
Detection and analysis of volatile organic compounds’ (VOCs) biomarkers lead to improvement in healthcare diagnosis and other applications such as chemical threat detection and food quality control. Here, we report on tri-molybdenum phosphide (Mo3P) and multi- walled carbon nanotube (MWCNT) junction-based vapor quantum resistive sensors (vQRSs), which exhibit more than one order of magni- tude higher sensitivity and superior selectivity for biomarkers in comparison to pristine MWCNT junctions based vQRSs. Transmission electron microscope/scanning tunneling electron microscope with energy dispersive x-ray spectroscopy, x-ray diffraction, and x-ray photo- electron spectroscopy studies reveal the crystallinity and the presence of Mo and …
In-Situ Gold-Ceria Nanoparticles: Superior Optical Fluorescence Quenching Sensor For Dissolved Oxygen, Nader Shehata, Ishac Kandas, Effat Samir
In-Situ Gold-Ceria Nanoparticles: Superior Optical Fluorescence Quenching Sensor For Dissolved Oxygen, Nader Shehata, Ishac Kandas, Effat Samir
Electrical & Computer Engineering Faculty Publications
Cerium oxide (ceria) nanoparticles (NPs) have been proved to be an efficient optical fluorescent material through generating visible emission (~530 nm) under violet excitation. This feature allowed ceria NPs to be used as an optical sensor via the fluorescence quenching Technique. In this paper, the impact of in-situ embedded gold nanoparticles (Au NPs) inside ceria nanoparticles was studied. Then, gold–ceria NPs were used for sensing dissolved oxygen (DO) in aqueous media. It was observed that both fluorescence intensity and lifetime were changed due to increased concentration of DO. Added gold was found to enhance the sensitivity of ceria to DO …
Superconducting Radio-Frequency Cavity Fault Classification Using Machine Learning At Jefferson Laboratory, Chris Tennant, Adam Carpenter, Tom Powers, Anna Shabalina Solopova, Lasitha Vidyaratne, Khan Iftekharuddin
Superconducting Radio-Frequency Cavity Fault Classification Using Machine Learning At Jefferson Laboratory, Chris Tennant, Adam Carpenter, Tom Powers, Anna Shabalina Solopova, Lasitha Vidyaratne, Khan Iftekharuddin
Electrical & Computer Engineering Faculty Publications
We report on the development of machine learning models for classifying C100 superconducting radio-frequency (SRF) cavity faults in the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab. CEBAF is a continuous-wave recirculating linac utilizing 418 SRF cavities to accelerate electrons up to 12 GeV through five passes. Of these, 96 cavities (12 cryomodules) are designed with a digital low-level rf system configured such that a cavity fault triggers waveform recordings of 17 rf signals for each of the eight cavities in the cryomodule. Subject matter experts are able to analyze the collected time-series data and identify which of the …
Gold/Qds-Embedded-Ceria Nanoparticles: Optical Fluorescence Enhancement As A Quenching Sensor, Nader Shehata, Effat Samir, Ishac Kandas
Gold/Qds-Embedded-Ceria Nanoparticles: Optical Fluorescence Enhancement As A Quenching Sensor, Nader Shehata, Effat Samir, Ishac Kandas
Electrical & Computer Engineering Faculty Publications
This work focuses on improving the fluorescence intensity of cerium oxide (ceria) nanoparticles (NPs) through added plasmonic nanostructures. Ceria nanoparticles are fluorescent nanostructures which can emit visible fluorescence emissions under violet excitation. Here, we investigated different added plasmonic nanostructures, such as gold nanoparticles (Au NPs) and Cadmium sulfide/selenide quantum dots (CdS/CdSe QDs), to check the enhancement of fluorescence intensity emissions caused by ceria NPs. Different plasmonic resonances of both aforementioned nanostructures have been selected to develop optical coupling with both fluorescence excitation and emission wavelengths of ceria. In addition, different additions whether in-situ or post-synthesis have been investigated. We found …
Thermoelectric Porous Mof Based Hybrid Materials, Engelbert Redel, Helmut Baumgart
Thermoelectric Porous Mof Based Hybrid Materials, Engelbert Redel, Helmut Baumgart
Electrical & Computer Engineering Faculty Publications
Porous hybrid materials and MOF (Metal-Organic-Framework) films represent modern designer materials that exhibit many requirements of a near ideal and tunable future thermoelectric (TE) material. In contrast to traditional semiconducting bulk TE materials, porous hybrid MOF templates can be used to overcome some of the constraints of physics in bulk TE materials. These porous hybrid systems are amenable for simulation and modeling to design novel optimized electron-crystal phonon-glass materials with potentially very high ZT (figure of merit) numbers. Porous MOF and hybrid materials possess an ultra-low thermal conductivity, which can be further modulated by phonon engineering within their complex porous …
Special Section Guest Editorial: Machine Learning In Optics, Jonathan Howe, Travis Axtell, Khan Iftekharuddin
Special Section Guest Editorial: Machine Learning In Optics, Jonathan Howe, Travis Axtell, Khan Iftekharuddin
Electrical & Computer Engineering Faculty Publications
This guest editorial summarizes the Special Section on Machine Learning in Optics.
Longitudinal Bunch Profile Diagnostic For Magnetized Electron Beams, Mark Stefani, Fay Hannon
Longitudinal Bunch Profile Diagnostic For Magnetized Electron Beams, Mark Stefani, Fay Hannon
Electrical & Computer Engineering Faculty Publications
The study of magnetized electron beam has become a high priority for its use in ion beam cooling as part of electron ion colliders and the potential of easily forming flat beams with a large aspect ratio. In this paper, a new diagnostic is described with the purpose of studying longitudinal and transverse magnetized beam properties. The device is a modification to a typical pepper-pot. Specifically, this 1D pepper-pot was designed for use with a transverse deflecting cavity for longitudinal bunch profile measurements of magnetized beams.
Transverse Uncorrelated Emittance Diagnostic For Magnetized Electron Beams, Fay Hannon, Mark Stefani
Transverse Uncorrelated Emittance Diagnostic For Magnetized Electron Beams, Fay Hannon, Mark Stefani
Electrical & Computer Engineering Faculty Publications
The study of magnetized electron beam has become a high priority for its use in ion beam cooling as part of electron ion colliders and the potential of easily forming flat beams for various applications. In this paper, a purpose-specific diagnostic is described with the intention of studying transverse magnetized beam properties. The device is a modification to the classic pepper-pot, used in this context to measure the uncorrelated components of transverse emittance in addition to the typical effective emittance. The limitations of traditional methods are discussed, and simulated demonstrations of the new technique shown.
Charge Storage In Wo³ Polymorphs And Their Application As Supercapacitor Electrode Material, Vaibhav Lokhande, Abhishek Lokhande, Gon Namkoong, Jin Hyeok Kim, Taeksoo Ji
Charge Storage In Wo³ Polymorphs And Their Application As Supercapacitor Electrode Material, Vaibhav Lokhande, Abhishek Lokhande, Gon Namkoong, Jin Hyeok Kim, Taeksoo Ji
Electrical & Computer Engineering Faculty Publications
Tungsten oxide is a versatile material with different applications. It has many polymorphs with varying performance in energy storage application. We report simple and facile way to synthesize four phases of tungsten oxide from same precursor materials only by changing the pH and temperature values. Monoclinic, hexagonal, orthorhombic and tetragonal phase obtained, were analyzed and tested for supercapacitor application. The electrochemical analysis of four phases indicates that the hexagonal phase is best-suited electrode material for supercapacitor. The hexagonal phase exhibits higher specific capacitance (377.5 Fg-1 at 2 mVs-1), higher surface capacitive contribution (75%), better stability and rate …
Carbon Multicharged Ion Generation From Laser-Spark Ion Source, Md. Mahmudur Rahman, Oguzhan Balki, Hani E. Elsayed-Ali
Carbon Multicharged Ion Generation From Laser-Spark Ion Source, Md. Mahmudur Rahman, Oguzhan Balki, Hani E. Elsayed-Ali
Electrical & Computer Engineering Faculty Publications
Multicharged carbon ions are generated by using a laser-assisted spark-discharge ion source. A Q-switched Nd:YAG laser pulse (1064 nm, 7 ns, ≤ 4.5 × 109 W/cm2) focused onto the surface of a glassy carbon target results in its ablation. The spark-discharge (∼1.2 J energy, ∼1 µs duration) is initiated along the direction of the plume propagation between the target surface and a grounded mesh that is parallel to the target surface. Ions emitted from the laser-spark plasma are detected by their time-of-flight using a Faraday cup. The ion energy-to-charge ratio is analyzed by a three-mesh retarding field …
Compact -300 Kv Dc Inverted Insulator Photogun With Biased Anode And Alkali-Antimonide Photocathode, C. Hernandez-Garcia, P. Adderley, B. Bullard, J. Benesch, J. Grames, J. Gubeli, F. Hannon, J. Hansknecht, J. Jordan, R. Kazimi, G. A. Krafft, M. A. Mamun, M. Poelker, M. L. Stutzman, R. Suleiman, M. Tiefenback, Y. Wang, S. Zhang, H. Baumgart, G. Palacios-Serrano, S. Wijethunga, J. Yoskowitz, C. A. Valerio Lizarraga, R. Montoya Soto, A. Canales Ramos
Compact -300 Kv Dc Inverted Insulator Photogun With Biased Anode And Alkali-Antimonide Photocathode, C. Hernandez-Garcia, P. Adderley, B. Bullard, J. Benesch, J. Grames, J. Gubeli, F. Hannon, J. Hansknecht, J. Jordan, R. Kazimi, G. A. Krafft, M. A. Mamun, M. Poelker, M. L. Stutzman, R. Suleiman, M. Tiefenback, Y. Wang, S. Zhang, H. Baumgart, G. Palacios-Serrano, S. Wijethunga, J. Yoskowitz, C. A. Valerio Lizarraga, R. Montoya Soto, A. Canales Ramos
Electrical & Computer Engineering Faculty Publications
This contribution describes the latest milestones of a multiyear program to build and operate a compact −300 kV dc high voltage photogun with inverted insulator geometry and alkali-antimonide photocathodes. Photocathode thermal emittance measurements and quantum efficiency charge lifetime measurements at average current up to 4.5 mA are presented, as well as an innovative implementation of ion generation and tracking simulations to explain the benefits of a biased anode to repel beam line ions from the anode-cathode gap, to dramatically improve the operating lifetime of the photogun and eliminate the occurrence of micro-arc discharges.
Initial Implementation Of A Machine Learning System For Srf Cavity Fault Classification At Cebaf, A. Carpenter, K. M. Iftekharuddin, T. Powers, Y. Roblin, A. Solopava Shabalina, C. Tennant, L. Vidyaratne
Initial Implementation Of A Machine Learning System For Srf Cavity Fault Classification At Cebaf, A. Carpenter, K. M. Iftekharuddin, T. Powers, Y. Roblin, A. Solopava Shabalina, C. Tennant, L. Vidyaratne
Electrical & Computer Engineering Faculty Publications
The Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Laboratory is a high power Continuous Wave (CW) electron accelerator. It uses a mixture of of SRF cryomodules: older, lower energy C20/C50 modules and newer, higher energy C100 modules. The cryomodules are arrayed in two anti-parallel linear accelerators. Accurately classifying the type of cavity faults is essential to maintaining and improving accelerator performance. Each C100 cryomodule contains eight 7-cell cavities. When a cavity fault occurs within a cryomodule, all eight cavities generate 17 waveforms each containing 8192 points. This data is exported from the control system and saved for review. Analysis …
A Review: Thermal Stability Of Methylammonium Lead Halide Based Perovskite Solar Cells, Tanzila Tasnim Ava, Abdullah Al Mamun, Sylvain Marsillac, Gon Namkoong
A Review: Thermal Stability Of Methylammonium Lead Halide Based Perovskite Solar Cells, Tanzila Tasnim Ava, Abdullah Al Mamun, Sylvain Marsillac, Gon Namkoong
Electrical & Computer Engineering Faculty Publications
Perovskite solar cells have achieved photo-conversion efficiencies greater than 20%, making them a promising candidate as an emerging solar cell technology. While perovskite solar cells are expected to eventually compete with existing silicon-based solar cells on the market, their long-term stability has become a major bottleneck. In particular, perovskite films are found to be very sensitive to external factors such as air, UV light, light soaking, thermal stress and others. Among these stressors, light, oxygen and moisture-induced degradation can be slowed by integrating barrier or interface layers within the device architecture. However, the most representative perovskite absorber material, CH3 …
Ignition Of A Plasma Discharge Inside An Electrodeless Chamber: Methods And Characteristics, Mounir Laroussi
Ignition Of A Plasma Discharge Inside An Electrodeless Chamber: Methods And Characteristics, Mounir Laroussi
Electrical & Computer Engineering Faculty Publications
In this paper the generation and diagnostics of a reduced pressure (300 mTorr to 3 Torr) plasma generated inside an electrodeless containment vessel/chamber are presented. The plasma is ignited by a guided ionization wave emitted by a low temperature pulsed plasma jet. The diagnostics techniques include Intensified Charge Coupled Device (ICCD) imaging, emission spectroscopy, and Langmuir probe. The reduced-pressure discharge parameters measured are the magnitude of the electric field, the plasma electron number density and temperature, and discharge expansion speed.
The Effect Of Tube Geometry On The Chiral Plasma, S. Jin, D. Zou, X. Lu, Mounir Laroussi
The Effect Of Tube Geometry On The Chiral Plasma, S. Jin, D. Zou, X. Lu, Mounir Laroussi
Electrical & Computer Engineering Faculty Publications
A chiral plasma plume has recently been reported inside a circular quartz tube without the use of an external magnetic field. It is believed that the quartz tube plays an important role in the formation of the chiral plasma plume. In this paper, to better understand how this interesting structure is generated, the effect of the tube geometry on the chiral plasma is investigated. First, the effect of the thickness of the tube wall on the chiral plasma is investigated. It is interesting to find that a too thin or too thick tube wall is not favorable for generating the …
Improved Gas Sensing Performance Of Ald Azo 3-D Coated Zno Nanorods, P. Lin, X. Chen, K. Zhang, H. Baumgart
Improved Gas Sensing Performance Of Ald Azo 3-D Coated Zno Nanorods, P. Lin, X. Chen, K. Zhang, H. Baumgart
Electrical & Computer Engineering Faculty Publications
This paper reports an enhancement on the sensing performance of ZnO nanorod ethanol sensors with a new approach by utilizing nested coatings of Aluminum doped ZnO (AZO) thin films by Atomic Layer Deposition (ALD) technology. ZnO nanorods were grown by the hydrothermal method with the ZnO seed layer synthesized on Silicon wafers by ALD. To enhance the sensing performance of ZnO nanorod ethanol sensors, multiple coated AZO thin film 3-D coatings were deposited on the surface of the intrinsic ZnO nanorods by ALD.To investigate the sensing performance of the ZnO nanorods sensor for the detection of ethanol vapor, a gas …
Electrostatic Design And Conditioning Of A Triple Point Junction Shield For A −200 Kv Dc High Voltage Photogun, G. Palacios-Serrano, F. Hannon, C. Hernandez-Garcia, M. Poelker, H. Baumgart
Electrostatic Design And Conditioning Of A Triple Point Junction Shield For A −200 Kv Dc High Voltage Photogun, G. Palacios-Serrano, F. Hannon, C. Hernandez-Garcia, M. Poelker, H. Baumgart
Electrical & Computer Engineering Faculty Publications
Nuclear physics experiments performed at the Continuous Electron Beam Accelerator Facility (CEBAF) at the Jefferson Lab require a DC high voltage photogun to generate polarized electron beams from GaAs photocathodes. The photogun uses a tapered ceramic insulator that extends into the vacuum chamber and mechanically holds the cathode electrode. Increasing the operating voltage from nominal −130 kV to −200 kV will provide lower beam emittance, better transmission through injector apertures, and improved photocathode lifetime. This desire to increase the photogun operating voltage led to the design of a triple-point-junction shield electrode which minimizes the electric field at the delicate insulator-metal-vacuum …