Physics Commons^™

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Investigation Of Laser Based Flow Diagnostics With Metastable Argon, Sterling S. Gordon

Physics Theses & Dissertations

The overarching motivation of this work is the development of seedless, non-intrusive, laser-based diagnostics for supersonic airflow in wind tunnels. To advance this goal, this dissertation fo-cuses on three-photon excitation in a research-grade argon beam within a tabletop vacuum system, which offers a controlled environment for testing and refining the approach. The chosen excitation scheme drives argon atoms to the 3d[5/2]₃ state using a pulsed Ti:Sapphire laser system, enabling time-of-flight (ToF) measurements on atoms that subsequently undergo a multi-step decay to the metastable 4s[3/2]₂ state. Although full realization of this excitation scheme was hindered by technical …

The Role Of Atmospheric Turbulence On Cloud Droplet Distribution And Droplet Impaction On An Airfoil, Arash Shad, Hashnayne Ahmed, ‪Nadim Zgheib, S. Balachandar, S. A. Sherif

Mechanical Engineering Faculty Publications

We conduct turbulence-informed Euler–Lagrange simulations of droplet-laden flow to examine the effects of atmospheric turbulence on droplet impingement characteristics on a NACA 0012 airfoil. We implement statistical overloading, whereby we inject millions of droplets, ranging in diameter from 1 to 160 microns, upstream of the airfoil at an average streamwise velocity of 120 m/s. Within a fraction of a second, these droplets would have either impinged on the airfoil or continued downstream. While the incoming air flow is maintained uniform, droplet injection is informed by ambient turbulence, affecting both the droplet velocity distribution as well as the size-dependent preferential concentration …

Active Measurement Of A Micron-Order Gap Under High-Speed And High-Temperature Conditions, Andrew Becker

Doctoral Dissertations and Master's Theses

The hypersonic regime poses numerous challenges that researchers face in the development of hypersonic flight vehicles. Due to their excellent thermomechanical properties, ultra-high-temperature ceramics (UHTCs) have risen as a promising solution to act as a protective barrier between the harsh environment and surface materials of these flight bodies. The mechanical operation of a portable hypersonic simulation device was developed in-house and tested at Argonne National Laboratories (ANL) to gather in-situ material response of prospective UHTC samples when exposed to a hypersonic regime. An edge detection-based algorithm was developed and used in LabVIEW to monitor the health and operation of the …

Probing The Effect Of Peg-Dna Interactions And Buffer Viscosity On Tethered Dna In Shear Flow, Fatema Tuz Zohra, Huda Al-Zuhairi, Jefferson Reinoza, Hyeongjun Kim, Andreas Hanke

Mechanical Engineering Faculty Publications

DNA flow-stretching is a widely employed, powerful technique for investigating the mechanisms of DNA-binding proteins involved in compacting and organizing chromosomal DNA. We combine single-molecule DNA flow-stretching experiments with Brownian dynamics simulations to study the effect of the crowding agent polyethylene glycol (PEG) in these experiments. PEG interacts with DNA by an excluded volume effect, resulting in compaction of single, free DNA molecules in PEG solutions. In addition, PEG increases the viscosity of the buffer solution. By stretching surface-tethered bacteriophage lambda DNA in a flow cell and tracking the positions of a quantum dot labeled at the free DNA end …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Enhanced Point Cloud Generation From A Novel 360° Underwater Lidar, Olagoke E. Daramola

Dissertations

This dissertation presents novel algorithms to improve the mapping capabilities of a 360-degree underwater Pulsed Laser Line Scanner LiDAR (PLLS-360°). Due to its 360° field-of-view (FOV), the PLLS-360° is a compact full-waveform omnidirectional imager suitable for seafloor mapping, underwater asset inspection, object detection, ice-sheet mapping, and construction progress monitoring. The proposed methodology includes an improved waveform fitting technique for saturated waveform recovery, detection array response correction, radiometric corrections, and fusion of LiDAR and sonar bathymetric datasets. The first part of this dissertation assesses the LiDAR’s performance and describes how the data for this unique 360° FOV architecture is processed. The …

Advancing Real-World Implementation Of The Well Optimized Linear Finder (Wolf) High-Speed Atmospheric Turbulence Compensation Method, Timothy Evan Coon

Theses and Dissertations

This dissertation advances the real-world implementation of the Well Optimized Linear Finder (WOLF) method for high-speed Atmospheric Turbulence Compensation (ATC). Atmospheric turbulence introduces phase aberrations into optical wavefronts and degrades image quality in terrestrial imaging systems. Traditional phase diversity methods are computationally intensive and poorly suited to real-time operation. The WOLF method addresses these limitations through a novel, point-wise formulation of the optical transfer function (OTF) as a structured autocorrelation of the generalized pupil function (GPF). This formulation enables the estimation of phase aberrations at individual spatial coordinates with distributed computational complexity.

The research begins by developing a MATLAB-based simulation …

Stokes-Dependent Droplet Collection Efficiency On A Naca 0012 Airfoil From Droplet-Informed Simulations With Statistical Overloading, Arash Shad, Hashnayne Ahmed, ‪Nadim Zgheib, S. Balachandar, S. A. Sherif

Mechanical Engineering Faculty Publications

Accurate modelling of ice accretion on aircraft wings requires analysing droplet impingement on the surface to optimize the design of ice-protection systems. We perform Euler–Lagrange simulations of a droplet-laden flow impinging on a NACA 0012 airfoil. Our study includes water droplets with eight discrete sizes ranging from 1 to 160 microns. We vary the free-stream velocity of the incoming airflow in the range 60≤⁢𝑈≤⁢240 m s−1 and the chord length of the airfoil in the range 0.5≤⁢𝑐≤⁢2 m. Due to the dilute nature of supercooled clouds, one-way coupling is used in the simulations. The effects of droplet breakup and collision …

A Rigorous Framework For An Improved Messinger/Myers Model Of Ice Accretion Under Conditions Of Variable Property And Unsteady Aircraft Icing, Hashnayne Ahmed, Arash Shad, ‪Nadim Zgheib, S. A. Sherif, S. Balachandar

Mechanical Engineering Faculty Publications

We analyse the Messinger/Myers model by critically evaluating simplifying assumptions through a rigorous formulation of the rime ice accretion process. We explore the effects of both constant and variable ice density and thermal conductivity, along with the effects of sublimation from the ice surface. The effects of key factors such as droplet impact rate, ambient temperature relative to the freezing temperature and the temperature difference between the ambient air and the airfoil surface are examined. Under these varying conditions, the present rigorous formulation is used to assess the significance of unsteady effects, variable ice properties and sublimation. We observe that …

Numerical Simulation Of Frost Formation And Heat Transfer On Fin-And-Tube Heat Exchangers In Turbulent Cross-Flow, Mahsan Farzaneh, ‪Nadim Zgheib, S. Balachandar, S. A. Sherif

Mechanical Engineering Faculty Publications

Frost formation in fin-and-tube heat exchangers in turbulent cross-flow presents significant challenges in industrial refrigeration applications, affecting heat transfer efficiency and operational reliability. The purpose of this work is to investigate frost deposition and growth on a staggered bank of a fin-and-tube freezer coil under turbulent forced convection conditions. The focus here is on investigating conditions that closely replicate real-world scenarios in large walk-in industrial freezers. Using a direct numerical simulation approach, we examine the flow dynamics and thermal behaviour in the presence of frost, considering turbulent regimes characterized by a Reynolds number in the range 1050≤𝑅⁢𝑒𝐷,avg≤4800, with the characteristic …

Fused-Silica Microelectromechanical Systems For Relative Gravimetry, Ethan Doerstling

Theses and Dissertations

Gravimeters are devices that measure gravitational acceleration which can be used by the United States Air Force (USAF) in the areas of navigation and remote sensing. Fused-silica microelectromechanical systems (MEMS) devices offer capabilities to make inexpensive relative gravimeters with higher thermal stability than common silicon devices while maintaining good gravitational sensitivity. The fused-silica devices in this research were designed, simulated, fabricated, and tested to observe their performance as gravimeters. The devices exhibit properties of highly sensitive accelerometers but the current designs do not qualify as gravimeters. This study provides information to improve the sensitivity and stability of these fused-silica MEMS …

Signal Modeling Of High Purity Germanium Detectors, Brooke Parker Thibodeau

Honors Scholar Theses

Pulse shape analysis can be used to analyze radiation incident on a semiconductor diode detector. Finite element analysis (FEA) can be used to simulate high purity germanium detectors with user-specified geometry, impurity concentration, and bias voltage. Subsequent streamline calculation can be used to conduct pulse shape analysis for single and multiple site gamma-ray interactions within the detector volume. Cross sections of the detector can be visualized by contour plots of the electric field, drift velocity magnitude, and collection time, as well as t30 and t90 rise-time values.

An Integrative Approach To Einstein’S Field Equations Of General Relativity For High School Students, Christina M. Aintablian

Senior Honors Theses

Einstein’s Field Equations form the foundation of the theory of General Relativity, describing the interdependence of mass-energy and spacetime curvature, where curvature gives rise to gravity. However, the complexity of these equations makes them difficult for high school students to grasp. The mathematical framework of General Relativity is introduced step by step, beginning with relative motion and culminating in a discussion of complex phenomena that challenge modern physics. Each explanation intertwines core concepts of relativity with pre-established mental models to enhance learning. Through the use of figures, analogies, narratives, and thought experiments, a structured framework is developed to make relativity …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

A Comparison And Investigation Of 2d Axisymmetric And 3d Models For The Wave Augmented Varicose Explosions Atomizer, Caleb Miller

Senior Honors Theses

Atomization of non-Newtonian, high-viscosity fluids is a challenging task with many applications. One method of atomizing these types of flows is the Wave Augmented Varicose Explosions (WAVE) atomizer. Using this framework, the study establishes an analysis methodology, investigates the relationship between 2D axisymmetric (2DA) and 3D models, and provides analysis of geometric, non-geometric, and non-dimensional parameter influences on the atomizer characterization in 2DA models. The study found that 2DA models can provide viable predictions of certain 3D model characteristics, established several mathematical models for parameter relationships among 2DA models, and identified certain metrics as inadequate predictors of atomizer characteristics in …

Exploring Corona Discharge In Electrostatic Printing For Electronics And In Other Application, Zijian Weng

USF Tampa Graduate Theses and Dissertations

The field of printed electronics (PEs) is expanding rapidly, driven by increasing market demand. According to reports, the global market for PEs is expected to reach $23 billion by 2026, with a compound annual growth rate of 18.3% from 2023 to 2028. This growth necessitates the development of innovative printing technologies that can meet these demands efficiently, delivering high-quality, high-resolution PEs suitable for applications in health, environmental monitoring, sports, aerospace, and more.

Currently, PEs manufacturing relies on two main groups of printing technologies. Contact printing methods offer high-speed production but struggle with precision, while non-contact methods provide high resolution but …

The Spice (Sustainable, Physics-Inspired Culinary Education) Lab – A Digestible Few-Nexus Educational Platform, Carla Ramsdell

National Collaborative for Research on Food, Energy, and Water Education (NC-FEW)

The SPICE (Sustainable, Physics-Inspired Culinary Education) Lab is a unique educational platform that enables participants from a wide disciplinary background to engage and become literate in the unique connections between food, energy and water. This small but mighty space allows for outreach education in many formats, including formal college courses, university-centered hands-on activities and public outreach.

The work performed in this space fills a unique need in the FEW-Nexus education opportunities because it is adaptable to many learners and learning opportunities and its focus on kitchen science makes these concepts approachable which can later be expanded to understand other critical …

Polarized Positrons At Ce⁺Baf, A. Ushakov, J. Benesch, M. Bruker, L. Cardman, J. Conway, S. Covrig Dusa, P. Degtiarenko, Y. Enomoto, S. Gessner, P. Ghoshal, S. Gopinath, J. Grames, C. Gulliford, S. Habet, G. Hays, C. Hernández-García, A. Hofler, R. Kazimi, M. Kostin, V. O. Kostroun, F. Lin, V. Lizárraga-Rubio, K. Mahler, Y. Morikawa, S. Nagaitsev, S. Ogur, G. Palacios-Serrano, N. Raut, B. Rimmer, Y. Roblin, A. Seryi, K. Smolenski, M. Stutzman, R. Suleiman, A. Sy, N. Taylor, D. Turner, A. Ushakov, C. Valerio-Lizarraga, E. Voutier, S. Wang, Y. Zhang

Mechanical & Aerospace Engineering Faculty Publications

A baseline concept for a continuous wave (CW) polarized positron injector was developed for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab [1]. This concept is based on positron beam generation by a high current polarized electron beam (1 mA, 120 MeV, >85% polarization) irradiating a rotating water-cooled tungsten target or liquid metal target. The update on the development of the Ce⁺BAF injector concept including the polarized electron source, the development of high power targets, simulations of positron capture, the design of the transport line from the positron injector to the CEBAF North Linac and the planned experiment …

Simulating Positive Ion Distribution In The Protodune Single Phase Detector, Vishnu Pfeiffer

Electronic Theses and Dissertations

This work covers the validation and implementation of a model to solve for argon ion (Ar+) distribution in the ProtoDUNE-SP liquid argon time projection chamber (LArTPC). ProtoDUNE-SP undergoes a constant flux of cosmic ray muons due to surface operation. The performance of the ProtoDUNE-SP provided valuable insights into single-phase technology, membrane cryostat technology, and calibration of cryogenic instrumentation. Still, challenges in achieving precise measurements persist due to the space charge effect—the distortion of the electric field within the detector due to the accumulation of positive argon ions generated from constant cosmic muon flux. The overarching goal of this thesis is …

Drag Reduction In Ground Vehicles Using A Model Porous Medium, Abdullah Ikram Nabi

Master’s Theses

This research investigates aerodynamic drag reduction on a 25° Slanted Ahmed Body (SAB) by integrating porous media model rods through combined experimental and computational methods at a Reynolds number of 1.16×10⁴. Two porous media configurations: short rods (6.75% of the model height) and long rods (20.0% of the model height), both featuring cylindrical rods with 80% porosity, were systematically compared against a baseline SAB. In-depth analyses were performed to investigate the wake flow topology, recirculation region characteristics, pressure coefficient distribution, Reynolds stress distributions and drag coefficient. Experimental investigations employed particle image velocimetry for precise flow visualization, while Reynold Averaged Navier-Stokes …

Outgassing Measurements Of Bare And Magnetite-Coated Low-Carbon Steel Vacuum Chambers, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

The outgassing properties of bare and magnetite-coated AISI 1020 low-carbon steel vacuum chambers were evaluated to establish material selection criteria for extreme high vacuum applications, namely, to explore the possibility of using these materials to build next-generation spin-polarized photoelectron guns. Water outgassing measurements using the throughput method revealed that the magnetite-coated chamber exhibited five times lower outgassing at room temperature prior to baking, but this advantage disappears after 80 °C baking. Hydrogen outgassing measurements demonstrated significant differences after intensive heat treatment: the bare low-carbon steel vacuum chamber achieved a specific outgassing rate of 9.6 × 10⁻¹⁶ Torr L s …

A Comparative Study Of Conventional And Statistically Active Corrosion Methods For Corrosion Growth Assessment Of A 24-Inch Gas Pipeline, Rudi Rinaldi, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

Component failures in oil and gas pipelines can have fatal consequences, leading to operational downtimes and environmental damage. Knowledge of the corrosion growth rate is fundamental to pipeline integrity management, as it is essential for risk assessment and decisions related to asset management. This article aimed to compare two approaches for the corrosion growth estimation of the 24-inch offshore gas pipeline: the conventional method versus the Statistically Active Corrosion (SAC) method. This article is based on the in-line inspection (ILI) results of two consecutive assessments from 2020 to 2023 of the entire 73 km of the pipeline. The results show …

The Use Of Two-Dimensional Detectors For Snapshot And High Accuracy Imaging Ellipsometry, Jeremy A. Vanderslice

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Ellipsometry is a powerful and sensitive optical technique used to characterize thin film thickness and optical properties by measuring changes in the polarization state of light upon reflection or transmission. This dissertation investigates novel ellipsometry configurations that use two-dimensional detectors to enhance measurement speed, spatial resolution, or accuracy of ellipsometry measurements. The study involves the development of three different ellipsometry configurations, encompassing mechanical prototypes, mathematical models, and test measurements to evaluate each system.

Advisor: Jeffrey Shield

Magnetic Nano And Micro Rods As Tools For Characterizing Materials Mechanical Properties: Fundamentals And Applications, Artis Brasovs

All Dissertations

The focus of this dissertation is insect blood (Hemolymph). Hemolymph is analyzed by taking a materials science approach. Rheological characterization of hemolymph has been performed for the first time. Owing to a minute amount of available material, a new protocol was established where Magnetic Rotational Spectroscopy (MRS) with ferromagnetic nanorods was employed. The challenge was examining the microliter droplets' viscosity in less than a few minutes. This challenge was successfully resolved.

Blood is critical for the insect's survival: after wounding, the insect has to seal the wound quickly, in a few minutes. As the mechanism of fast clotting has never …