Open Access. Powered by Scholars. Published by Universities.®

Computer Sciences Commons™

Open Access. Powered by Scholars. Published by Universities.®

Systems Science

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 3481 - 3510 of 3920

Full-Text Articles in Computer Sciences

Multi-Dimension Proportion-Differential Nonlinear Pilot Model And Simulation Application, Weian Jiang Jan 2019

Multi-Dimension Proportion-Differential Nonlinear Pilot Model And Simulation Application, Weian Jiang

Journal of System Simulation

Abstract: For better simulated study of pilot’s accident avoidance ability and pilot induced oscillation (PIO) characteristic of a man-aircraft close loop system, a method of “physiology-psychology-physiology” is presented to divide pilot models into three parts of input(signal), processing(decision making) and output(action), and a new multi-dimension proportion-differential nonlinear pilot model (MPDNLPM) is presented also. Simulated study is performed by simulated control of an aircraft pitch control model under backside tracking status for carrier landing. Conclusion: 1) The control performance of the man-aircraft system is slightly better than an ideal proportional control. 2) PIO is possible for well-trained pilot. 3) Proper anticipation, …

Go to article

Simulation Research On Predictive Wavelet Neural Network Intelligent Control System, Jingwei Liu, Zhou Rui, Zhao Hui, Minling Zhu, Xianghua Meng, Yuhao Zhang Jan 2019

Simulation Research On Predictive Wavelet Neural Network Intelligent Control System, Jingwei Liu, Zhou Rui, Zhao Hui, Minling Zhu, Xianghua Meng, Yuhao Zhang

Journal of System Simulation

Abstract: In order to realize control parameters online tuning and optimizing applications in the high risk and high pollution environment, vector time series prediction based intelligent control methods are proposed, which are combined autoregressive moving average vector time series predictive method and wavelet neural network method. Based on theoretical and comparative research: feasibility, stability, better dynamic characteristics, less steady-state error of the proposed methods are verified. A comparative simulation platform for the above intelligent control system is provided. Stability guarantee method of the above new methods is given.

Go to article

Hybrid Decoding Algorithm For Low-Density Parity-Check Codes, Guowei Qu, Xiaoping Song Jan 2019

Hybrid Decoding Algorithm For Low-Density Parity-Check Codes, Guowei Qu, Xiaoping Song

Journal of System Simulation

Abstract: A hybrid decoding algorithm for low-density parity-check (LDPC) codes based on the soft-decision iterative decoding method and the erasure decoding method is proposed. If a decoding error is detected when the maximum iteration number of the soft-decision iterative decoding is reached, a decision is made on each bit whether it is zero or one or an erasure according to the cumulative reliability of the bit in the iterative process. Then the decision result is decoded with erasure decoding. Simulation results on random LDPC codes with moderate length indicate that the proposed hybrid decoding algorithm outperforms the traditional soft-decision iterative …

Go to article

Trust Evaluation Model Based On Fuzzy Set And D-S Evidence Theory In Wireless Sensor Network, Zhiping Zhou, Xiaoxiao Zhao, Nannan Shao Jan 2019

Trust Evaluation Model Based On Fuzzy Set And D-S Evidence Theory In Wireless Sensor Network, Zhiping Zhou, Xiaoxiao Zhao, Nannan Shao

Journal of System Simulation

Abstract: A trust evaluation model based on fuzzy set and D-S evidence in wireless sensor network is proposed. Considering security requirements and energy consumption, three typical trust factors are defined to calculate node’s direct trust which is for fuzzy classification by using fuzzy set theory. Fuzzy membership function is the basic belief function of the D-S evidence theory. Indirect trust is obtained from neighbor nodes’ recommendations, the direct trust and indirect trust are fused according to Dempster combination rule after being amended with weight. The effective combination of identity-based cryptosystem and the trust management mechanism improve the security …

Go to article

Forestry Felling & Cultivation Machine Virtual Training System Based On Unity3d, Bowen Cheng, Yili Zheng, Qingqing Huang, Jinhao Liu Jan 2019

Forestry Felling & Cultivation Machine Virtual Training System Based On Unity3d, Bowen Cheng, Yili Zheng, Qingqing Huang, Jinhao Liu

Journal of System Simulation

Abstract: A forestry felling & cultivation machine virtual training system based on Unity3D was developed. The models of forestry felling & cultivation machine were built up using 3dsMAX with the assistance of SolidWorks based on a forestry felling & cultivation machine. The models of forestry felling & cultivation machine and trees were imported into Unity3D to create a virtual operating environment. Each part of forestry felling & cultivation machine needs to be processed for the establishment of paternity in accordance with the simulation, the corresponding mathematical model was established to simulate the motion of the manipulator based on the analysis …

Go to article

Parallel Pattern Recognition Of Leak Current Data Using Spark-Knn, Li Li, Yongli Zhu, Yaqi Song Jan 2019

Parallel Pattern Recognition Of Leak Current Data Using Spark-Knn, Li Li, Yongli Zhu, Yaqi Song

Journal of System Simulation

Abstract: With the rapid development of smart grid, the status monitoring data of power grid equipment increase exponentially and gradually form the big data. Traditional computing architectures are no longer to meet the demand of computing performance. This paper explores how Spark and Cloud computing can accelerate performance of missive insulator leak current data pattern recognition. The Parallel KNN (k-Nearest Neighbor) algorithm is designed and implemented by using Spark and Aliyun E-MapReduce cloud computing platform. The results from experiments show that the performance of Spark-KNN is 2.97 times of MapReduce-KNN and gains acceleration of 8.8 times. The experimental results confirm …

Go to article

Stress Distribution Formula Of Threads Casing Joint Under Symmetrical Load, Tong Hua, Xiaohong Tang, Xiaohua Zhu, He Huan, Haoran Tao Jan 2019

Stress Distribution Formula Of Threads Casing Joint Under Symmetrical Load, Tong Hua, Xiaohong Tang, Xiaohua Zhu, He Huan, Haoran Tao

Journal of System Simulation

Abstract: While itis difficult tomeasure thestress distribution of casing threads underground without calculation by finite element method. Here assumes a deformation compatibility factor Ux, use an initial calculation to represent the thread stress, f(x)=f0Ux, and applythe ABAQUS finite element software to calculate the stress distribution of the threads under different symmetrical loads. Obtain the expressions of Ux by curve fitting, and get the threads stress calculation formula to provide an intuitive, fast and accurate method of calculation for the site. Providea theoretical reference for development and manufacture of casing …

Go to article

Overview Of Multi-Agents Modeling And Simulation For Underwater Unmanned Combat Systems, Hongtao Liang, Fengju Kang, Yanfang Fu Jan 2019

Overview Of Multi-Agents Modeling And Simulation For Underwater Unmanned Combat Systems, Hongtao Liang, Fengju Kang, Yanfang Fu

Journal of System Simulation

Abstract: Military UUV is developing toward the direction of intellectualization and coordination of multi-UUV system. It is composed of complex underwater unmanned system (UUS) with changeable underwater environment and complex combat mission. Multi-agents (MAS) modeling technology has become the mainstream method to study this kind of complex system. The development and characteristics of UUS are briefly and comprehensively reviewed. The latest developments of MAS theory are systematically summarized, and MAS modeling and simulation technology for multi-UUV cooperative combat system (MUCCS) are analyzed. A novel MAS theory method, that is immune agent interactive network (IAIN), is proposed, which combines the modeling …

Go to article

Numerical Simulation Of Borehole Stability In Underbalanced Drilling Coal Seam, Yumei Li, Su Zhong, Zhang Tao, Delong Zhang, Liwei Yu, Si Na Jan 2019

Numerical Simulation Of Borehole Stability In Underbalanced Drilling Coal Seam, Yumei Li, Su Zhong, Zhang Tao, Delong Zhang, Liwei Yu, Si Na

Journal of System Simulation

Abstract: According to the formation parameters of No.3 coal seam in the Qinshui Basin, Shanxi Province, considering the interaction between seepage and deformation in the borehole wall of coal seam, using the finite element method for establishing the stable elastoplastic numerical model of the borehole in coal seam,the variation of pore pressure near the wellbore wall with the seepage time and the effect of time delay on wellbore stability under underbalanced drilling condition were studied. The variation law of maximum displacement and maximum plastic deformation around borehole wall with bottom pressure were analyzed. The simulation results show that there …

Go to article

Permanent Magnet Synchronous Motor Multi-Parameter Identification Based On Improved Salp Swarm Algorithm, Mengqiu Wang, Wang Yan, Zhicheng Ji Jan 2019

Permanent Magnet Synchronous Motor Multi-Parameter Identification Based On Improved Salp Swarm Algorithm, Mengqiu Wang, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: Since the multi-parameter identification of permanent magnet synchronous motor (PMSM) has slow speed and low accuracy, a parameter identification method based on the improved salp swarm algorithm was proposed in this paper. The algorithm firstly adopted the self-adaptive evaluation-move strategy and neighborhood optimum guide strategy based Von Neumann topology to update the position of followers twice, which strengthened information cooperation in the population and accelerated the convergence rate of parameter identification. Secondly, the algorithm used the opposition-based learning strategy to perturb the population position with a certain mutation probability, that avoided local optimum and misconvergence of the parameters. The …

Go to article

Improvement Of Grey Target Algorithm And Its Application In Assessment Of Marine Gas Turbine, Tongqing Wang, Mei Shan, Xiaobo Li, Jiajie Liu Jan 2019

Improvement Of Grey Target Algorithm And Its Application In Assessment Of Marine Gas Turbine, Tongqing Wang, Mei Shan, Xiaobo Li, Jiajie Liu

Journal of System Simulation

Abstract: In the modern shipbuilding industry, gas turbines are increasingly becoming the main power supply devices for ships with their good overall performance. The assessment of their overall performance is very important in the development and introduction of gas turbines. By using the grey target theory, a comprehensive gas turbine performance evaluation model is constructed and the grey target method can easily deal with the evaluation problem which has the characteristics of "small amount of data, lean information, and uncertainty". By discussing the influence of distinguishing coefficient in the algorithm, a method for determining the value of the distinguishing coefficient …

Go to article

Impact Of Attractiveness And Influence Of Information On Cascade Size Distribution, Dong Jian, Bin Chen, Liu Liang, Chuan Ai, Zhang Fang, Xiaogang Qiu Jan 2019

Impact Of Attractiveness And Influence Of Information On Cascade Size Distribution, Dong Jian, Bin Chen, Liu Liang, Chuan Ai, Zhang Fang, Xiaogang Qiu

Journal of System Simulation

Abstract: The distribution of the cascade size can capture the distribution of popularity of a social network. Numerous studies have shown that the cascade size distribution follows fat-tail distributions, including power-law distribution and bimodal distribution; The underlying characteristic of this highly skewed distribution lacks quantitative experimental analysis. Based on the heterogeneous stochastic information dissemination model, namely the SVRF model, this paper examines the impact of the information attractiveness and influence on the cascade size distribution through lots of computational experiments. We find that when the mean value of the information influence and attractiveness is small, the cascade sizes follow …

Go to article

Simulation Analyzing For Drawing Up Methodology Of Cooperative Train Working Diagram And Route Allocation Plan, Zhou Yan Jan 2019

Simulation Analyzing For Drawing Up Methodology Of Cooperative Train Working Diagram And Route Allocation Plan, Zhou Yan

Journal of System Simulation

Abstract: The quality of the train diagram directly affects the efficiency of the transport operation and management. Though the inadequacies of computer drawing train working diagram were reviewed, an integrated drawing up methodology of train diagram and train route allocation plan was put forward to optimize the allocation of resources, based on the interaction relationship of train diagram and train route allocation plan. On that basis, the overall state transition adjustment algorithm, which consists of the “full timetable” result and collaborative model route allocation plan, was also proposed. Finally, the prototype system framework based on .NET was described, and the …

Go to article

Three-Dimensional Model Of Magnetostrictive Force Sensor Considering Stress Coupling And Experimental Research, Li Bo, Jiabin Yang, Shu Liang, Penghui Li, Wu Hong Jan 2019

Three-Dimensional Model Of Magnetostrictive Force Sensor Considering Stress Coupling And Experimental Research, Li Bo, Jiabin Yang, Shu Liang, Penghui Li, Wu Hong

Journal of System Simulation

Abstract: Considering the brittleness of normal magnetostrictive and piezoelectric materials, a new magnetostrictive force sensor is proposed, in which Galfenol alloy is taken as the sensing element. Considering the anisotropy of Galfenol, three-dimensional magneto-mechanical coupled model is presented on the basis of electromagnetic and mechanical governing equation. The nonlinear magnetization behavior of Galfenol is described by employing the discrete energy-averaged model. The coupling of the magnetization model and the structural model is implemented with the PDE weak form equations. The model is solved by using the weak form module of Comsol Multiphysics. Simulation results show that both field and stress …

Go to article

Design Of Fault Tolerant Control Visual Simulation System For Flying Wing Aircrafts, Shaojie Zhang, Qingkai Meng Jan 2019

Design Of Fault Tolerant Control Visual Simulation System For Flying Wing Aircrafts, Shaojie Zhang, Qingkai Meng

Journal of System Simulation

Abstract: A visual simulation platform based on Qt Quick was designed with respect to the simulation about fault tolerant control for flying wing aircrafts. Aircraft mathematical model and control law were developed using Simulink. Man-machine interface was developed based on Qt Quick to inject fault to Simulink model, load control law, setting up the simulation parameters and process, the interface can monitor and display graphically the key parameters to test and verify fault tolerant control laws. FlightGear visual engine was driven by MATLAB to achieve real-time visual flight simulation and the aircraft were showed in 3-D model. Baidu Map’s API …

Go to article

Multi-Constraint Service Selection Based On Decomposition Of Global Qos, Fang Chen, Jindong Wang, Hengwei Zhang, Wang Na Jan 2019

Multi-Constraint Service Selection Based On Decomposition Of Global Qos, Fang Chen, Jindong Wang, Hengwei Zhang, Wang Na

Journal of System Simulation

Abstract: With the rapid growth of Web services in cloud computing environment, users make new demands on dynamic service composition, that quickly selects composite service which can meet multi-constraints. According to the demand, a multi-constraint service selection method based on decomposition of global QoS was proposed. A new cultural genetic algorithm was designed to decompose the global QoS constraints, and services were filtered by combining with the functional constraints between candidate services. An adaptive replacement strategy was used to dynamically adjust QoS constraint boundaries, so as to ensure the most appropriate composite service obtained by local selection. Experimental results show …

Go to article

Research On Impact Performance Of Layer-Number Of 2024 Aerospace Aluminum Alloy Immobilized Target Against Bird Strike, Jianxin Xu, Jiajun Yuan, Yunfei Deng Jan 2019

Research On Impact Performance Of Layer-Number Of 2024 Aerospace Aluminum Alloy Immobilized Target Against Bird Strike, Jianxin Xu, Jiajun Yuan, Yunfei Deng

Journal of System Simulation

Abstract: In order to investigate the anti-penetration performance of target plate of the same thickness under different number of layers, a model of SPH(Smoothed Particle Hydrodynamics) cylindrical bird bullet to impact 2024 aerospace aluminum alloy Lagrange target is established by using the AUTODYN finite element software. The thickness of target is 1 mm, 2 mm, 3 mm and 4 mm, 1 mm and 2 mm target plate is divided into single and double, 3 mm target plate is divided into single, double and three layers, 4 mm target plate is divided into single, double and four layers. …

Go to article

Fault Co-Simulation Of Fuel Regulator In A Certain Type Of Turbofan Engine, Wei Xiang, Benwei Li, Xinyi Yang, Xingbo Wang Jan 2019

Fault Co-Simulation Of Fuel Regulator In A Certain Type Of Turbofan Engine, Wei Xiang, Benwei Li, Xinyi Yang, Xingbo Wang

Journal of System Simulation

Abstract: A co-simulation method for fuel regulator fault diagnosis in a certain type of turbofan engine is performed, which consists of AMEsim Model of main fuel control system and Simulink Model of aero-engine. The AMEsim Model of main fuel system and Simulink Model of aero-engine are built and their accuracy is validated by experiments and the engine’s operating data, respectively. The co-simulation model based on the main fuel control system and the aero-engine is proposed through the interface of AMEsim and Simulink software. The typical faults and obviation methods are simulated by the co-simulation model. The research shows that the …

Go to article

Study On Design And Simulation Of Pyramidal Horn Antenna, Denghua Li, Fangfang Ji, Hao Cui, Wenbai Chen Jan 2019

Study On Design And Simulation Of Pyramidal Horn Antenna, Denghua Li, Fangfang Ji, Hao Cui, Wenbai Chen

Journal of System Simulation

Abstract: In order to study the low-profile panel antenna that works in Ku band (12.25’12.75GHz), a high-gain Pyramidal horn antenna is designed as the unit of low-profile panel antenna. To meet dual polarization, it was taken into account that the radiation aperture of antenna unit has symmetric structure. Thus the feed waveguide is designed into a square waveguide. The proposed antenna is designed, simulated and optimized for antenna gain with HFSS (High Frequency Structure Simulator) software. Simulated results show that: in the Ku band, the reflection coefficient is less than -21dB; and the VSWR …

Go to article

Assessment And Verification Of Code-Carrier Coherence On Bds, Dongxia Li, Fuhan Song, Ruihua Liu Jan 2019

Assessment And Verification Of Code-Carrier Coherence On Bds, Dongxia Li, Fuhan Song, Ruihua Liu

Journal of System Simulation

Abstract: In order to verify code-carrier coherence on BeiDou Navigation Satellite System (BDS), the monitoring and assessment system of code-carrier coherence on BDS is designed. Code-Carrier Divergence (CCD) monitor is designed to detect the anomaly status of ionosphere, and based on the detection results, ionosphere delay error is eliminated by using Divergence-Free Smoothing (DFree) or Ionosphere-Free Smoothing (IFree) separately. The values of integer ambiguity are calculated based on tri-frequency ambiguity decomposition model, and the cycle slip is detected by using tri-frequency pseudorange code and combination of carrier phase. Assessment and verification of code-carrier coherence can be conducted. It is …

Go to article

Analysis And Optimization Of Mr Damper Based On Parallel Of Positive And Negative Stiffness, Yanbin Liu, Yawei Wang, Jianhai Han Jan 2019

Analysis And Optimization Of Mr Damper Based On Parallel Of Positive And Negative Stiffness, Yanbin Liu, Yawei Wang, Jianhai Han

Journal of System Simulation

Abstract: For purpose of reducing broadband vibration of precision machine tool from environment, a MR damper with squeeze mode was designed based on parallel of positive and negative stiffness. First, according to fluid continuity equation and momentum equation, the LPM (Lumped Parameter Model) was set up. Then, using two-way fluid-solid coupled nonlinear FEA (Finite Element Analysis), the flow field distribution was discussed for revealing flow characteristics of damper. Based on the LPM, the dynamic stiffness and displacement transfer rate, as well as the high-low frequency decoupling theory, were studied. Finally, multi-objective genetic algorithm was used to carry out the optimization …

Go to article

Modeling And Simulating On Flow Characters Of Axial Piston Pump With Concial Cylinder Block Considering The Hydraulic Oil Containing Air, Donglin Tang, Wu Fan, Zhiquan Ma, Zhichun Zeng Jan 2019

Modeling And Simulating On Flow Characters Of Axial Piston Pump With Concial Cylinder Block Considering The Hydraulic Oil Containing Air, Donglin Tang, Wu Fan, Zhiquan Ma, Zhichun Zeng

Journal of System Simulation

Abstract: Aiming at the problem that air bubbles mix into hydraulic oil would affect fluid properties, and then would affect the flow characters of axial piston pump with concial cylinder block, according to the theoretical ananlysis, the generic submodel of the fluid properties and single piston/swash plate mechanism were developed by AMESet, and the simulation result verified the applicability of the fluid properties generic submodel. The model of whole pistion pump was developed by AMESim. The influences of air content in hydraulic oil and pistion dip angle on the flow characters of pistion pump were studied. The results …

Go to article

High Performance Fault-Tolerant Scheduling Method And Simulation For Heterogeneous Multicore, Shigan Yu, Zhimin Tang, Xiaochun Ye, Zhimin Zhang Jan 2019

High Performance Fault-Tolerant Scheduling Method And Simulation For Heterogeneous Multicore, Shigan Yu, Zhimin Tang, Xiaochun Ye, Zhimin Zhang

Journal of System Simulation

Abstract: To deal with the problem of low performance and high power consumption when solving the transient fault of the processor with three mode redundancy (TMR), a task execution algorithm for heterogeneous multicore considering fault tolerant (TEAHFT) is proposed. The tasks to be executed are divided into sensitive tasks and fault-tolerant tasks. The sensitive tasks are executed in a TMR mode, and the fault-tolerant tasks are executed in a competitive scheduling mode. The task will be rerun in TMR method if the results of the fault-tolerant tasks do not meet the reliability threshold. The simulation experimental results show that TEAHFT …

Go to article

Method And Simulation Of Gradual Rough Milling Based On Surface Deformation, Xiulin Sui, Xiaoqi Chen, Jianghua Ge Jan 2019

Method And Simulation Of Gradual Rough Milling Based On Surface Deformation, Xiulin Sui, Xiaoqi Chen, Jianghua Ge

Journal of System Simulation

Abstract: In view of uneven allowance and rough surface of traditional equal height stratification for rough milling, a gradual hierarchy process method was proposed. As the model established by T-spline surface has unified parameter domain, an improved variable distance offset method was used to define the rules of surface deformation, and a series of deformation surface sequences were obtained. The cutting depth, tool radius and other machining parameters were used as constraint conditions so as to get the sequence of processing layers. By planning the tool path of each layer, the whole tool path of gradual hierarchy process which was …

Go to article

Cam Of Possible Accident For Longitudinal Slope Curve Of Mountain Freeway, Mingbao Pang, Zhanghui Cai Jan 2019

Cam Of Possible Accident For Longitudinal Slope Curve Of Mountain Freeway, Mingbao Pang, Zhanghui Cai

Journal of System Simulation

Abstract: Based on the analysis of vehicle driving behaviors and accidents, a cellular automaton (CA) simulation model of longitudinal slope curve on mountain freeway with the possible occurrence of traffic accident was established. The model was preliminarily validated via the comparisons between the accident rates in simulation experiments and that in actual statistics for the concrete roads. The possible schemes were determined by setting the different values of road geometric linear parameters. The nonlinear behaviors of traffic flow were simulated and the accident probabilities were obtained. The relations among the accident rate and the parameters’ values were discussed. …

Go to article

Simulation Of Blade Tip Grooving Effect On Performance Of Twin-Stage Variable-Pitch Axial Fan, Xuemin Ye, Jiankun Zhang, Chunxi Li Jan 2019

Simulation Of Blade Tip Grooving Effect On Performance Of Twin-Stage Variable-Pitch Axial Fan, Xuemin Ye, Jiankun Zhang, Chunxi Li

Journal of System Simulation

Abstract: For a twin-stage variable-pitch axial fan, a novel blade tip treatment carving a chute from the pressure side to suction side is proposed, and fan performance under different blade tip treatments is simulated to determine the excellent treatment. The effects of blade tip grooving in a single stage or both stages on fan performance and internal dynamics are examined. Numerical results show that both blade tip treatments can improve the fan performance; the overall promotion of fan performance illustrates that the best scheme is the blade tip grooving in the first stage followed by the blade tip grooving …

Go to article

Design Of Third-Order Zero-Free Mracs Taking State Variables From Model, Qian Chao, Song Fei Jan 2019

Design Of Third-Order Zero-Free Mracs Taking State Variables From Model, Qian Chao, Song Fei

Journal of System Simulation

Abstract: Since the current design method of the relative order n*≥3 MRACS taking state variables from model introduces some linear positive feedback loops, so it is difficult to be used in practical systems. This paper took the third-order zero-free (n*=3) system as the study object and designed the controller for third-order zero-free MRACS taking state variables from model by using the zero state equivalence relation between two different control systems. The design method of the controller is based on the Popov hyperstability theory. The controller only used integrators except for a differentiator and avoided introducing linear …

Go to article

Improved Model Reference Adaptive And Its Application In Grinding Process, Zhou Ying, Chen Yang, Bin Yue Jan 2019

Improved Model Reference Adaptive And Its Application In Grinding Process, Zhou Ying, Chen Yang, Bin Yue

Journal of System Simulation

Abstract: Aiming at the characteristics between a ball mill and a grader during the grinding process such as multi variable, strong-coupling and parameter time variation, after decoupling the mathematical model, a model reference adaptive control (MRAC) method for online automatic gain adjustment by differential evolution algorithm is proposed. Due to return sand and water supply and other factors bringing uncertainty to the controlled object model, it needs to adjust constantly adaptation gain online through the differential evolution so as to overcome the effects of parameter variations in mine operation process and various kinds of interference to system. Simulation results show …

Go to article

Collaborative Optimal Scheduling Method For Production And Energy Consumption In Discrete Manufacturing Process, Wenjie Chen, Wang Yan Jan 2019

Collaborative Optimal Scheduling Method For Production And Energy Consumption In Discrete Manufacturing Process, Wenjie Chen, Wang Yan

Journal of System Simulation

Abstract: The collaborative optimization of manufacturing process and energy consumption is one of the hot research issues in intelligent optimization manufacturing. To solve the scheduling optimization problem of discrete manufacturing process, a coordinated scheduling optimization of production and energy consumption with the shortest processing time and lowest energy consumption is established. The model proposes an improved differential evolution algorithm based on adaptive mutation and crossover probability factor to solve the optimal scheduling problem. By establishing the operation-based coding method, the application of continuous algorithm in discrete optimization scheduling problem is realized by using ascending ordering rules. The effectiveness of …

Go to article

System Simulation Study On Influences Of Oil Price, Policy And Public Opinion On Travel, Yijun Liu, Mengwei Li, Lian Ying Jan 2019

System Simulation Study On Influences Of Oil Price, Policy And Public Opinion On Travel, Yijun Liu, Mengwei Li, Lian Ying

Journal of System Simulation

Abstract: With the advancement of urbanization, environmental problems such as traffic congestion and automobile exhaust pollution have received widespread attention, which made it of great significance to rationally adjust and guide people to choose green travel modes to optimize the structure of consumer travel. By constructing agent-based binary and ternary consumer driving state simulation models, three measures that may affect the consumer travel, namely, oil price regulation, policy intervention and public opinion guidance are researched, in order to explore the most influential measures, and how the three measures are more suitable for guiding healthy travel and optimizing urban road conditions, …

Go to article

First Prev Next Last