Computer Sciences Commons^™

Sturm-Liouville Equation: The Bridge Between Eigenvalue And Green's Function Problems, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

This article is intended as an educational aid and discusses guided wave propagation problems that are modeled via the Sturm-Liouville equation in electromagnetics. The bridge between source-free (eigenvalue) and source-driven (Green's function) problems that are represented by the same Sturm-Liouville equation is emphasized. The presentation focuses on representation of an arbitrary source from the features (eigenfunctions) of the problem geometry and extraction of the eigenvalues of a problem from propagation characteristics (Green's function) on a canonical problem; a homogeneously filled parallel plate waveguide with non-penetrable boundaries

State Of The Art For Differential Circuits In Wireless Transceivers: A New Wideband Active Balun In Sige Bicmos Technology, Balwant Godara, Alain Fabre

Turkish Journal of Electrical Engineering and Computer Sciences

The aim of this paper is 3-fold: firstly, to provide a comprehensive overview of the use of differential circuits for analogue signal processing in wireless transceivers; secondly, to describe, in detail, single-ended signal to differential conversion, and the corresponding theory of such devices, their characterisation, various methods of implementation, and comparative analyses of their performance; lastly, to propose a new transistor-based solution for wideband baluns. This novel solution is based on the current conveyor and has been modelled using the transistor parameters of a 0.35 \mu m SiGe BiCMOS technology. The salient features of the new implementation are: (a) stable …

A Pi Controller Based On Gain-Scheduling For Synchronous Generator, Alireza Sedaghati

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper a gain- scheduling scheme of a proportional integral (GSPI) controller is proposed for a synchronous generator. In presented scheme, both proportional and integral gains are allowed to vary within a predetermined range. In order to validate the effectiveness of GSPI controller, simulation studies for a single-machine infinite bus power system are used .The results verify improved performance of GSPI controller comparing to conventional AVR under various operating conditions.

Agents For Integrating Distributed Data For Complex Computations, Ahmed M. Khedr, Raj Bhatnagar

Turkish Journal of Electrical Engineering and Computer Sciences

Algorithms for many complex computations assume that all the relevant data are available on a single node of a computer network. In the emerging distributed and networked knowledge environments, databases relevant for computations may reside on a number of nodes connected by a communication network. These data resources cannot be moved to other network sites due to privacy, security, and size considerations. The desired global computation must be decomposed into local computations to match the distribution of data across the network. The capability to decompose computations must be general enough to handle different distributions of data and different participating nodes …

Statistical Model Of Hot-Carrier Degradation And Lifetime Prediction For P-Mos Transistors, Firat Kaçar, Ayten Kuntman, Hakan Kuntman

Turkish Journal of Electrical Engineering and Computer Sciences

Along with advances in microelectronics, and computer and space technologies, device dimensions are becoming smaller; as a result, hot-carrier effect, lifetime prediction, and reliability become more important concepts for MOS transistors. In this paper, the degradation in the drain current and threshold voltage of P-MOS transistors are observed by operating the devices under voltage stress conditions. Using the observation results, the effect of hot-carriers was investigated statistically and a new statistical method for modeling was proposed as an alternative to those given in the literature. The linear regression method is used to estimate the power, Weibull, and logarithmic parameters, and …

The Effect Of Collector Doping On Inp-Based Double Heterojunction Bipolar Transistors, Serkan Topaloğlu, Jörn Driesen, Werner Prost, Franz Josef Tegude

Turkish Journal of Electrical Engineering and Computer Sciences

High current effects on double heterojunction bipolar transistor (DHBT) performance were investigated. Three DHBTs with different collector doping densities were grown and processed. DC and RF measurements were performed to evaluate the influence of collector doping and the related Kirk effect on HBT performance. In addition to these samples, the Kirk effect was proven on SHBTs and the delay of this effect on submicron HBTs was investigated.

Digital Fractional Frequency Synthesizer Based On Counters, Milan Stork

Turkish Journal of Electrical Engineering and Computer Sciences

This paper describes the architecture of a new pure digital frequency synthesizer based on pulse generators, counters and a register. The technique described here is much simpler than other methods. The synthesizer presented is suitable for the design of VLSI architectures or for programmable large-scale integration circuits.

State-Space Synthesis Of Current-Mode First-Order Log-Domain Filters, Ali̇ Kirçay, Uğur Çam

Turkish Journal of Electrical Engineering and Computer Sciences

This paper proposes current-mode first-order log-domain filters, which are systematically derived using the state-space synthesis procedure. First-order low-pass, high-pass, and all-pass responses are obtained with different circuit types. The filter circuits have very simple structures, since they use only bipolar junction transistors (BJTs) and a grounded capacitor. They can be electronically tuned by changing an external current. The filters have a greater bandwidth due to inherently current-mode and log-domain operation. PSPICE simulations are given to confirm the theoretical analysis.

Electrical And Computer Engineering Education In The 21^{St} Century: Issues, Perspectives And Challenges, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

No abstract provided.

Engineering Education In The 21st Century: Issues And Perspectives, Leopold B. Felsen

Turkish Journal of Electrical Engineering and Computer Sciences

No abstract provided.

Electronic Publishing For Engineering Education, Donald G. Dudley

Turkish Journal of Electrical Engineering and Computer Sciences

Electronic transmission of text is a revolution in progress with a profound effect on engineering education. As with all revolutions, the result is both a threat and a promise. The promise is the ease and speed of dissemination of text. The threat involves serious difficulties that arise in efforts to protect the intellectual property rights of the authors and publishers of the technical information. In this paper, we discuss both the threat and the promise. We highlight the differences in dealing with books and with journals. We give a wide range of examples from both inside of and outside of …

Speaking With Numbers: Scientific Literacy And Public Understanding Of Science, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

Public understanding of science and scientific literacy is discussed. Scientific method, scientific process and scientific filter are reviewed accordingly. Basic terms of measurement and numerical calculation are outlined. Finally, fundamental requirements of scientific literacy and critical response skills are presented.

Introducing Students To Communications Concepts Using Optical And Low-Power Wireless Devices, James M. Conrad, Ivan Howitt

Turkish Journal of Electrical Engineering and Computer Sciences

Wireless communication has become an important feature for commercial products and a popular research topic within the last ten years. There are now more mobile phone subscriptions than wired-line subscriptions. Lately, one area of commercial interest has been low-cost, low-power, and short-distance wireless communication used for "personal wireless networks." Technology advancements are providing smaller and more cost effective devices for integrating computational processing, wireless communication, and a host of other functionalities. These embedded communications devices will be integrated into applications ranging from homeland security to industry automation and monitoring. They will also enable custom tailored engineering solutions, creating a revolutionary …

Infusing Technical Communication And Teamwork Within The Ece Curriculum, By April Kedrowicz, Sundy Watanabe, Damon Hall, Cynthia Furse

Turkish Journal of Electrical Engineering and Computer Sciences

This paper highlights a unique approach to infusing formal training and practice in oral and written communication and teamwork development in the Department of Electrical and Computer Engineering (ECE) at the University of Utah. Faculty and graduate (Ph.D.) students from the College of Humanities have teamed up with faculty from engineering to develop communication and teamwork instruction that is integrated into the existing engineering curriculum. These skills are used as a vehicle to provide better understanding of engineering concepts and their applications.

Two, Three And Four-Dimensional Electromagnetics Using Differential Forms, Karl F. Warnick, Peter Russer

Turkish Journal of Electrical Engineering and Computer Sciences

The exterior calculus of differential forms provides a mathematical framework for electromagnetic field theory that combines much of the generality of tensor analysis with the computational simplicity and concreteness of the vector calculus. We review the pedagogical aspects of the calculus of differential forms in providing distinct representations of field intensity and flux density, physically meaningful graphical representations for sources, fields, and fluxes, and a picture of the curl operation that is as simple and intuitive as that of the gradient and divergence. To further highlight the benefits of differential forms notation, we demonstrate the flexibility of the calculus of …

Secure Digital Communication Using Chaotic Symbolic Dynamics, Ajeesh P. Kurian, Sadasivan Puthusserypady

Turkish Journal of Electrical Engineering and Computer Sciences

One of the major hurdles in implementing chaotic communication schemes is the synchronization of chaotic systems. For the last two decades, numerous contributions of varying successes have been made by researchers from different disciplines for the synchronization of chaotic systems. Symbolic dynamics based synchronization method is shown to be capable of providing high quality synchronization (HQS), which is essential for reliable communication. In this work, using this method, a secure digital communication system is proposed. The well known piece-wise linear 1-D map such as tent map and Bernoulli shift map are used for this study. Since the information is dynamically …

Development And Delivery Of Coursework: The Legal/Regulatory/Policy Environment Of Cyberforensics, John W. Bagby, John C. Ruhnka

Journal of Digital Forensics, Security and Law

This paper describes a cyber-forensics course that integrates important public policy and legal issues as well as relevant forensic techniques. Cyber-forensics refers to the amalgam of multi-disciplinary activities involved in the identification, gathering, handling, custody, use and security of electronic files and records, involving expertise from the forensic domain, and which produces evidence useful in the proof of facts for both commercial and legal activities. The legal and regulatory environment in which electronic discovery takes place is of critical importance to cyber-forensics experts because the legal process imposes both constraints and opportunities for the effective use of evidence gathered through …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Is Forensic Computing A Profession? Revisiting An Old Debate In A New Field, Bernd C. Stahl

Journal of Digital Forensics, Security and Law

Forensic Computing is a new and quickly developing field. It is in the process of becoming an academic discipline or sub-discipline with all the features from full undergraduate and postgraduate course provision to conferences and journals. An important question in this process of turning into an established discipline is whether it will coincide with the recognition of the graduates as professionals. This paper hopes to stimulate the debate as to whether forensic computing is or should be a discipline. In order to approach this question, the paper will discuss the concept of forensic computing including the most salient topics of …

Development Of An Ontology Based Forensic Search Mechanism: Proof Of Concept, Jill Slay, Fiona Schulz

Journal of Digital Forensics, Security and Law

This paper examines the problems faced by Law Enforcement in searching large quantities of electronic evidence. It examines the use of ontologies as the basis for new forensic software filters and provides a proof of concept tool based on an ontological design. It demonstrates that efficient searching is produced through the use of such a design and points to further work that might be carried out to extend this concept.

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

The 2006 Analysis Of Information Remaining On Disks Offered For Sale On The Second Hand Market, Andy Jones, Craig Valli, Iain Sutherland, Paula Thomas

Journal of Digital Forensics, Security and Law

All organisations, whether in the public or private sector, use computers for the storage and processing of information relating to their business or services, their employees and their customers. A large proportion of families and individuals in their homes now also use personal computers and, both intentionally and inadvertently, often store on those computers personal information. It is clear that most organisations and individuals continue to be unaware of the information that may be stored on the hard disks that the computers contain, and have not considered what may happen to the information after the disposal of the equipment.

In …

Computer Forensics Field Triage Process Model, Marcus K. Rogers, James Goldman, Rick Mislan, Timothy Wedge, Steve Debrota

Journal of Digital Forensics, Security and Law

With the proliferation of digital based evidence, the need for the timely identification, analysis and interpretation of digital evidence is becoming more crucial. In many investigations critical information is required while at the scene or within a short period of time - measured in hours as opposed to days. The traditional cyber forensics approach of seizing a system(s)/media, transporting it to the lab, making a forensic image(s), and then searching the entire system for potential evidence, is no longer appropriate in some circumstances. In cases such as child abductions, pedophiles, missing or exploited persons, time is of the essence. In …

Hybrid Committee Classifier For A Computerized Colonic Polyp Detection System, Jiang Li, Jianhua Yao, Nicholas Petrick, Ronald M. Summers, Amy K. Hara, Joseph M. Reinhardt (Ed.), Josien P.W. Pluim (Ed.)

Electrical & Computer Engineering Faculty Publications

We present a hybrid committee classifier for computer-aided detection (CAD) of colonic polyps in CT colonography (CTC). The classifier involved an ensemble of support vector machines (SVM) and neural networks (NN) for classification, a progressive search algorithm for selecting a set of features used by the SVMs and a floating search algorithm for selecting features used by the NNs. A total of 102 quantitative features were calculated for each polyp candidate found by a prototype CAD system. 3 features were selected for each of 7 SVM classifiers which were then combined to form a committee of SVMs classifier. Similarly, features …

The Influence Of Quantization Process On The Performance Of Global Entropic Thresholding Algorithms Using Electrical Capacitance Tomography Data, A. J. Mwambela

Tanzania Journal of Science

In measuring component fraction in multiphase flows using tomographic techniques, it is desirable to use a high speed tomography system capable of generating 100 tomograms per second. The electrical capacitance tomography system in this regard is considered to be the best among the available tomographic techniques. However, due to its inherent limitations the system generates distorted reconstructed tomograms necessitating the use of extra signal processing techniques such as thresholding to minimize these distortions. Whilst thresholding technique has been effective in minimizing distortions, the additional computation associated with the process limits the speed of tomogram generation desired from the system. Further, …

Robust And Efficient Localization Techniques For Cellular And Wireless Sensor Networks, Haseebulla M. Khan

Computer Science Theses & Dissertations

Localization in wireless networks refers to a collection of tasks that, collectively, determines the location of a mobile user, striving to hide the effects of mobility from the user and/or application. Localization has become an important issue and has drawn considerable attention, as many applications including E-911, cargo tracking, locating patients, location-sensitive billing, etc., require knowledge of the location of user/objects. It was realized, quite a while back, that extending emergency 911-like services (E-911) to continually growing mobile population is one of the extremely important localization applications. The bulk of the proposed solutions to emergency location management in wireless environments …

Structured Object-Oriented Co-Analysis/Co-Design Of Hardware/Software For The Facts Powers System, Matt Ryan, Sojan Markose, Xiaoqing Frank Liu, Bruce M. Mcmillin

Computer Science Faculty Research & Creative Works

There are several approaches to the hardware/software design in embedded systems, ranging from the traditional sequential methods which focus on the determination of the hardware architecture prior to software design, to newer object-oriented approaches that attempt to apply software engineering methods to hardware design without a systematic process. This paper discusses a structured object-oriented methodology for the integrated co-analysis and co-design of hardware/software systems using an extended high order object-oriented modeling technique (HOOMT). This methodology offers a uniform method for hardware and software developers to jointly develop the specifications for and partitioning of the hardware and software components of a …

Knowledge Representation, Organization, And Formalization For Simulation Modeling Of Discrete Manufacturing System, Jung Hung Ma

All-Inclusive List of Electronic Theses and Dissertations

Simulation is an useful tool that helps managers making decision by designing models for real systems. It helps companies to study behaviors of real systems hy analyzing computer models and improve the systems based on the experiments' results. However, cross-domain knowledge requirement and lack of tools facilitate modeling are the main reasons that make industries hesitate to use simulation to assist making decision. This research is an attempt to develop robust knowledge representations for discrete manufacturing system and conceptual simulation model. A modeling methodology was proposed to utilize these knowledge representations (KRs) for developing conceptual simulation models from application domain …

Power Transmission Control Using Distributed Max-Flow, Bruce M. Mcmillin, Austin Armbruster, Mariesa Crow, Michael R. Gosnell

Computer Science Faculty Research & Creative Works

Existing maximum flow algorithms use one processor for all calculations or one processor per vertex in a graph to calculate the maximum possible flow through a graph's vertices. This is not suitable for practical implementation. We extend the max-flow work of Goldberg and Tarjan to a distributed algorithm to calculate maximum flow where the number of processors is less than the number of vertices in a graph. Our algorithm is applied to maximizing electrical flow within a power network where the power grid is modeled as a graph. Error detection measures are included to detect problems in a simulated power …