Computer Sciences Commons^™

Zoomfft-Based Demodulation Algorithm For Underwater Acoustic Ofdm Signals, Qing Guo, Angdi Li, Jing Wu, Haitao Su

Journal of System Simulation

Abstract: The picket fence effect of fast Fourier transform (FFT) restricts the demodulation performance of the underwater acoustic(UWA) communication systemusing orthogonal frequency division multiplexing (OFDM). To solve this problem, we propose a demodulation algorithm based on ZoomFFT. Specifically, the received signal is processed by frequency shifting and downsampling forarefined spectrum, which improves the spectralresolution and weakens the picketfence effect.Meanwhile, the channel response is refined, and the channel equalization algorithm is constructed on the basis of the minimum mean square error (MMSE) principle to eliminate the channel influence. Simulations show that the performance of underwater acoustic OFDM demodulation algorithm based on …

Design Of Fatigue Driving Detection System Based On Cascaded Neural Network, Bangqian Ao, Sha Yang, Jinqing Linghu, Zhenhuan Ye

Journal of System Simulation

Abstract: An algorithm is proposed to greatly improves the face detection rate and ensures the accuracy by adjusting the size of input images, expanding the minimum face size, and reducing the scaling ratio between layers of the detection window. The detection efficiency of this algorithm is 18 times higher than that of the original MTCNN. By building a new CNN structure model for the detection of eyes and mouths, we can achieve network detection accuracy of 95.6%. The proposed network is cascaded with the original MTCNN to continue classifying and locating the eyes and mouth in the formerly …

Segmentation Line Detection In Dental Model Based On Target Region Constraint, Tian Ma, Yun Li, Jiaojiao Li, Yuancheng Li

Journal of System Simulation

Abstract: It is an important pretreatment of a virtual orthodontic system to accurately segment teeth from a dental model. In the present methods, all patches are computed directly. To solve this problem, this paper proposes a segmentation line detection method based on target region constraint, which narrows down the detection range to the area around the actual segmentation line. In this method, the cutting plane and the cutting line are automatically formed according to the positions of seed points. The detection range is determined by the search for the position with the greatest negative curvature on the cutting line. The …

Modeling & Simulation Based System Of Systems Engineering, Lin Zhang, Kunyu Wang, Yuanjun Laili, Lei Ren

Journal of System Simulation

Abstract: To accommodate the dark and unstructured underwater working environment, the near-body pressure distribution characteristics of a bionic robot fish undulating in near wall region is studied. The feasibility of using artificial lateral line(ALL) to estimate the wall effect and flow field parameters is analyzed theoretically. A CFD(computational fluid dynamics) coupled solution model for near-body pressure simulation of a bionic robotic fish swimming near the wall is established and a near-body pressure data extraction and processing method is proposed. The effect of the wall clearance, inlet flow velocity and strouhal number (St) on the fish near-body pressure distribution …

Constructing The Agent Discrete Simulation Based On Devs Atomic Model, Xiaohan Wang, Lin Zhang, Yuanjun Laili, Kunyu Xie, Tingchun Hu

Journal of System Simulation

Abstract: In order to resolve the nonlinear and ill-posed inverse problem of the image reconstruction of electrical capacitance tomography (ECT), an image reconstruction algorithm based on one-dimensional convolutional neural network (1D CNN) is presented. The nonlinear mapping relationship between the independent measurement value of ECT system and the gray value of reconstructed image is established by 1D CNN. Six typical flow regimes with random distribution are obtained by the finite element simulation software and a 1D CNN is successfully trained. Simulation and static experiments are carried out and the reconstructed images using linear back projection, Landweber iterative algorithm and 1D …

Transmission Line Operation And Inspection Training Simulation Based On Multiple Time Scales And Vr, Jiawen Yan, Jijie Huang, Lie Zhou, Changjin Chen, Qiang Wu, Jintao Zhao

Journal of System Simulation

Abstract: Social learning is defined as the process that consumers use online reviews to fetch more precise information about product quality.Consequently, consumers would be more likely to purchase the product if the product quality learned was higher than their expectation, reference point effect named.To understand the impact of this effect in social learning on a firm's product decisions, we built a multi-agent model to solve the problem through simulation. According to the results, the reference point effect has a negative influence on the firm. The firm has to higher the product quality and price and therefore loses some profits. …

Product Decisions In Presence Of Social Learning And Reference Point Effect, Feng Li, Ying Wei

Journal of System Simulation

Abstract: In order to find out the source of VOCs(volatile organic compounds) emission and diffusion to the target area, and prevent the target area from further pollution, this paper propose an analytical method of VOCs hazard causes in related areas based on object function Petri net. The net structure describes the relationship between the potential pollution sources and the target area, and the operation of the net system reflects the change of VOCs hazard degree in the target area, and the calculation of hazard degree is integrated into the operation of the Petri net system. Through the actual case study, …

Review Of System Of Systems Combat Effectiveness Evaluation And Optimization Methods, Ziwei Zhang, Qisheng Guo, Zhiming Dong, Ang Gao, Yifei Wang

Journal of System Simulation

Abstract: The characteristics of system-of-systems combat effectiveness evaluation and optimization are analyzed. In light of the "holism", this paper proposes an idea of dividing system of systems combat effectiveness evaluation and optimization into three stages of comprehensive evaluation, analysis, and optimization. As for the practical problems that need to be solved in the three stages, typical methods suitable for each stage are summarized.The advantages and disadvantages of different methods are then compared. In view of the practical difficulties in implementing system of systems combat effectiveness evaluation and optimization guided by the "holism", this paper puts forward the next research directions …

Simulation And Optimization Of A New Multi-Channel Contact Center System, Junxiang Li, Lichao Li, Kun Ma

Journal of System Simulation

Abstract: In the actual operation of a contact center, it often encounters a large number of calls caused by an emergency. A traditional call center with a simple first-come-first-served queuing rule can hardly handle the rapid increase of calls properly. In this regard, without changing the number of seats, the call-back service channel for evacuating tasks and the special service channel for ensuring the service level are added. Considering customer abandonment, a new multi-channel queuing model for a contact center is built. This model is simulated by FlexSim software, and the results are comparatively analyzed. It is found that …

Modeling And Optimization For Manufacturing Cell Scheduling Based On Improved Wolf Pack Algorithm And Simulation, Zi'an Zhao, Hong Zhou, Yingjian Lei

Journal of System Simulation

Abstract: Aiming at the domestic aircraft stall spin simulation training need, a stall spin simulation training system is developed. The training system consists of the multi-channel dome visual system, the semi-physical simulation cockpit and the maneuvering force control loading system, etc. Distributed simulation technology is used to develop a realistic man-in-the-loop simulation training environment. For the stall spin simulation, the multi-source aerodynamic data is processed comprehensively, and an unsteady aerodynamic model at high angle of attack (AOA) is constructed, and the heavy-load digital electric control loading technology is used to realize the simulation of stall spin alternating force and jitter …

Vehicle Routing Problem With Refined Oil Secondary Distribution Considering Workload Balance, Zhenping Li, Guang Yang, Qianqian Han

Journal of System Simulation

Abstract: The small-signal model of a DC/DC converter is usually built by the analytic method, and its accuracy is verified by the frequency domain method. A new idea is developed to model the small signal of the converter, i.e., directly using the frequency domain method.The design process is as follows: The principle and modeling mechanism of the frequency domain method are analyzed, and the realization flow of Matlab modeling is introduced. A typical phase-shifted full-bridge converter is taken as the design object, and a simulation model is built by Simulink. The transfer function is obtained on the basis of …

Lod Modeling Method For Three-Dimensional Objects With Energy Operator, Yongzhi Wang, Zhenchao Li, Pengyu Liu, Hui Wang

Journal of System Simulation

Abstract: Current level of detail (LOD) modeling methods do not combine simplification and subdivision, which results in models not being rich in detail level. Therefore, the energy operator was used to combine the simplification algorithm of a three-dimensional (3D) object model with the subdivision algorithm, and a LOD modeling method based on an energy operator was proposed for 3D objects. The method involves three major steps: calculation of energy operators for 3D models, model simplification and model subdivision based on an energy operator. Experiments show that this method can generate models with rich levels of detail and has good visualization …

Monocular Semantic Slam Method Based On Object Relation Description, Shiqi Lin, Jikai Wang, Haoyuan Pei, Hao Zhao, Zonghai Chen

Journal of System Simulation

Abstract: Semantic information perception of the external environment and accurate positioning are the keys to autonomous navigation and operation of mobile robots. This paper proposes a method of semantic simultaneous localization and mapping (SLAM) based on a monocular camera. The system completes three-dimensional (3D) object detection while estimating the trajectory. We model the 3D objects with cuboids. Then, the semantic meanings, color distribution, size and neighborhood topology of the objects are extracted as descriptors for the accurate matching of objects between different frames. The camera pose, map points and object landmarks are optimized jointly in the backend of the system. …

Research On Nonlinear Evaluation Method Of Situational Hot Spots, Tengjiao Mao, Dongge Zhang, Xuefeng Liang, Yanjie Niu, Minggang Yu, Ming He

Journal of System Simulation

Abstract: The excessive amount of data and information in the situation map is likely to produce a huge cognitive load that exceeds the physiological limit. This can lead to delays in the perception, judgment, and decision-making of the commander, or even failure of decision-making activities in severe cases. For this reason, situation information needs to be processed to assess and highlight situational hotspots so that cognitive overload can be tackled. Based on the aggregation factors of collaborative targets, this paper takes the effective impact possibility of situational targets and the collaboration as the indicators, derives the attention function, and designs …

Research On Design Method For Transfer Function Of Dc/Dc Converter System Based On Frequency Domain Method, Song Gao, Xue Yin, Jiantao Xu, Yuhao Miao

Journal of System Simulation

Abstract: A robust optimal synchronization control method based on coupling dynamics model of the H-type motion platform is proposed for the problem that the H-type motion platform driven directly by permanent magnet linear synchronous motor has uncertainties such as biaxial coupling, parameter perturbation and external disturbances, which affect the synchronization control accuracy and robustness of the system. A biaxial coupling dynamics model is established based on Euler-Lagrange equation. The cross coupling synchronization controller is designed to effectively combine the single-axis tracking error with the biaxial synchronization error and its rate of change. TheH∞robust optimal synchronous controller …

Research On Collaborative Computing Offloading Model For Base Station Groups Based On Fireworks Algorithm, Bin Xu, Wenqing Yan, Zhuofan Han, Guangshen He, Tao Deng, Yunkai Zhao, Jin Qi

Journal of System Simulation

Abstract: Internet of Vehicles (IoV), AR, AI, and other computing-intensive, time-delay-sensitive applications are developing rapidly. However, due to the relatively insufficient computing capacity of mobile devices, such application tasks face serious latency, which seriously affects user experience and even fails to meet the needs of users. To solve this problem, by comprehensively considering delays and costs, we propose a cooperative computing offloading model based on a multi-user and multi-mobile edge computing (multi-MEC) server for base station groups. In addition, an improved fireworks algorithm based on convex optimization (CVX-FWA) is presented to solve the model and perform reasonable offloading and resource …

Energy Consumption Prediction For Air-Conditioning System Based On Dynamic Temperature Control, Yan Bai, Lulu Wu, Yin'e He, Yuying Wang

Journal of System Simulation

Abstract: To solve the problem of energy consumption prediction for air-conditioning systems implementing dynamic temperature control, we designed a dynamic temperature control strategy and obtained a dataset on the hourly energy consumption of the air-conditioning system through EnergyPlus simulation. An improved particle swarm optimization-back propagation neural network (IPSO-BPNN) prediction model was built on the basis of energy consumption analysis by an integrated method. Clustering, classification, and correlation analysis methods were integrated to mine the energy consumption pattern of the air-conditioning system and determine the input variables for the prediction model. A nonlinear change strategy was designed to adjust the inertia …

Optimal Path Planning For Multi-Stage Automatic Parking And Simulation Analysis, Qiming Wang, Gaoqiang Zong, Jinming Xu

Journal of System Simulation

Abstract: To resolve the path planning for narrow parallel parking spaces and the discontinuous curvature of the parking trajectory, this paper proposes a method of optimal multi-stage parking path planning considering collision avoidance constraints. A trajectory equation for the center of the vehicle rear axle is derived for the case when the steering wheel speed is constant. A function of collision avoidance constraints is developed to ensure the safe parking of the vehicle. With the center of the rear axle of the parking path as the control point, the optimal path is solved according to parking indicators such as the …

Research On Decision-Making Of Closed-Loop Supply Chain For Dual-Channel Recovery Based On Game Theory, Ying Xu, Qinming Liu, Linsen Zhou

Journal of System Simulation

Abstract: To tackle the difficulties and resource depletion in current packaging recycling, this paper constructs a centralized decision-making game model and three Stackelberg game models. Specifically, these Stackelberg game models are developed depending on the differences in the game power of participants in the closed-loop supply chain for dual-channel recovery, respectively corresponding to the cases where the manufacturer, the distributor or the third-party recycler is dominant. The optimal solutions of the four models are compared and analyzed. The benefits of decentralized decision-making do not reach the Pareto optimality as compared with centralized decision-making. An improved revenue sharing contract is …

Component Design And Simulation Of Netted Radar Fusion Processing, Jing Wu, Zhiming Xu, Xiaofeng Ai, Feng Zhao, Shunping Xiao

Journal of System Simulation

Abstract: Data fusion processing technology is the core of netted radars. Taking the air-defense radar network as the reference, this paper builds a component-based and reconfigurable data fusion algorithm library. With the component design method, the process of data fusion is divided into different components, such as data validity check, error match, time-space match, plot association, plot fusion, track initiation, track filtering, track association, track fusion, and track management. Each component involves different algorithms with a unified external interface, and algorithms can be chosen by parameter setting to meet different fusion requirements. Then, the complete processing template forplot fusion and …

Iseeq: Information Seeking Question Generation Using Dynamic Meta-Information Retrieval And Knowledge Graphs, Manas Gaur, Kalpa Gunaratna, Vijay Srinivasan, Hongxia Jin

Publications

Conversational Information Seeking (CIS) is a relatively new research area within conversational AI that attempts to seek information from end-users in order to understand and satisfy users’ needs. If realized, such a system has far-reaching benefits in the real world; for example, a CIS system can assist clinicians in pre-screening or triaging patients in healthcare. A key open sub-problem in CIS that remains unaddressed in the literature is generating Information Seeking Questions (ISQs) based on a short initial query from the end user. To address this open problem, we propose Information SEEking Question generator (ISEEQ), a novel approach for generating …

Deep-Precognitive Diagnosis: Preventing Future Pandemics By Novel Disease Detection With Biologically-Inspired Conv-Fuzzy Network, Aviral Chharia, Rahul Upadhyay, Vinay Kumar, Chao Cheng, Jing Zhang, Tianyang Wang, Min Xu

Computer Vision Faculty Publications

Deep learning-based Computer-Aided Diagnosis has gained immense attention in recent years due to its capability to enhance diagnostic performance and elucidate complex clinical tasks. However, conventional supervised deep learning models are incapable of recognizing novel diseases that do not exist in the training dataset. Automated early-stage detection of novel infectious diseases can be vital in controlling their rapid spread. Moreover, the development of a conventional CAD model is only possible after disease outbreaks and datasets become available for training (viz. COVID-19 outbreak). Since novel diseases are unknown and cannot be included in training data, it is challenging to recognize them …

Survey On Self-Supervised Representation Learning Using Image Transformations, Muhammad Ali, Sayed Hashim

Student Publications

Deep neural networks need huge amount of training data, while in real world there is a scarcity of data available for training purposes. To resolve these issues, self-supervised learning (SSL) methods are used. SSL using geometric transformations (GT) is a simple yet powerful technique used in unsupervised representation learning. Although multiple survey papers have reviewed SSL techniques, there is none that only focuses on those that use geometric transformations. Furthermore, such methods have not been covered in depth in papers where they are reviewed. Our motivation to present this work is that geometric transformations have shown to be powerful supervisory …

Cocoa: Context-Conditional Adaptation For Recognizing Unseen Classes In Unseen Domains, Puneet Mangla, Shivam Chandhok, Vineeth N. Balasubramanian, Fahad Shahbaz Khan

Computer Vision Faculty Publications

Recent progress towards designing models that can generalize to unseen domains (i.e domain generalization) or unseen classes (i.e zero-shot learning) has embarked interest towards building models that can tackle both domain-shift and semantic shift simultaneously (i.e zero-shot domain generalization). For models to generalize to unseen classes in unseen domains, it is crucial to learn feature representation that preserves class-level (domain-invariant) as well as domain-specific information. Motivated from the success of generative zero-shot approaches, we propose a feature generative framework integrated with a COntext COnditional Adaptive (COCOA) Batch-Normalization layer to seamlessly integrate class-level semantic and domain-specific information. The generated visual features …

Machine Learning To Predict Sports-Related Concussion Recovery Using Clinical Data, Yan Chu, Gregory Knell, Riley P. Brayton, Scott O. Burkhart, Xiaoqian Jiang, Shayan Shams

Faculty Research, Scholarly, and Creative Activity

Objectives
Sport-related concussions (SRCs) are a concern for high school athletes. Understanding factors contributing to SRC recovery time may improve clinical management. However, the complexity of the many clinical measures of concussion data precludes many traditional methods. This study aimed to answer the question, what is the utility of modeling clinical concussion data using machine-learning algorithms for predicting SRC recovery time and protracted recovery?
Methods
This was a retrospective case series of participants aged 8 to 18 years with a diagnosis of SRC. A 6-part measure was administered to assess pre-injury risk factors, initial injury severity, and post-concussion symptoms, including …

Transformnet: Self-Supervised Representation Learning Through Predicting Geometric Transformations, Hashim Sayed, Muhammad Ali

Student Publications

Deep neural networks need a big amount of training data, while in the real world there is a scarcity of data available for training purposes. To resolve this issue unsupervised methods are used for training with limited data. In this report, we describe the unsupervised semantic feature learning approach for recognition of the geometric transformation applied to the input data. The basic concept of our approach is that if someone is unaware of the objects in the images, he/she would not be able to quantitatively predict the geometric transformation that was applied to them. This self supervised scheme is based …

The Effect Of Using The Gamification Strategy On Academic Achievement And Motivation Towards Learning Problem-Solving Skills In Computer And Information Technology Course Among Tenth Grade Female Students, Mazyunah Almutairi, Prof. Ahmad Almassaad

International Journal for Research in Education

Abstract

This study aimed to identify the effect of using the gamification strategy on academic achievement and motivation towards learning problem-solving skills in computer and information technology course. A quasi-experimental method was adopted. The study population included tenth-grade female students in Al-Badi’ah schools in Riyadh. The sample consisted of 54 students divided into two equal groups: control group and experimental group. The study tools comprised an achievement test and the motivation scale. The results showed that there were statistically significant differences between the two groups in the academic achievement test in favor of the experimental group, with a large effect …

Land-Surface Parameters For Spatial Predictive Mapping And Modeling, Aaron E. Maxwell, Charles Shobe

Faculty & Staff Scholarship

Land-surface parameters derived from digital land surface models (DLSMs) (for example, slope, surface curvature, topographic position, topographic roughness, aspect, heat load index, and topographic moisture index) can serve as key predictor variables in a wide variety of mapping and modeling tasks relating to geomorphic processes, landform delineation, ecological and habitat characterization, and geohazard, soil, wetland, and general thematic mapping and modeling. However, selecting features from the large number of potential derivatives that may be predictive for a specific feature or process can be complicated, and existing literature may offer contradictory or incomplete guidance. The availability of multiple data sources and …

Subomiembed: Self-Supervised Representation Learning Of Multi-Omics Data For Cancer Type Classification, Sayed Hashim, Muhammad Ali, Karthik Nandakumar, Mohammad Yaqub

Computer Vision Faculty Publications

For personalized medicines, very crucial intrinsic information is present in high dimensional omics data which is difficult to capture due to the large number of molecular features and small number of available samples. Different types of omics data show various aspects of samples. Integration and analysis of multi-omics data give us a broad view of tumours, which can improve clinical decision making. Omics data, mainly DNA methylation and gene expression profiles are usually high dimensional data with a lot of molecular features. In recent years, variational autoencoders (VAE) [13] have been extensively used in embedding image and text data into …

Diagnosis Of Polypoidal Choroidal Vasculopathy From Fluorescein Angiography Using Deep Learning, Yu-Yeh Tsai, Wei-Yang Ling, Shih-Jen Chen, Paisan Ruamviboonsuk, Cheng-Ho King, Chia-Ling Tsai

Publications and Research

Purpose: To differentiate polypoidal choroidal vasculopathy (PCV) from choroidal neovascularization (CNV) and to determine the extent of PCV from fluorescein angiography (FA) using attention-based deep learning networks.

Methods: We build two deep learning networks for diagnosis of PCV using FA, one for detection and one for segmentation. Attention-gated convolutional neural network (AG-CNN) differentiates PCV from other types of wet age-related macular degeneration. Gradient-weighted class activation map (Grad-CAM) is generated to highlight important regions in the image for making the prediction, which offers explainability of the network. Attention-gated recurrent neural network (AG-PCVNet) for spatiotemporal prediction is applied for segmentation …