Other Chemistry Commons^™

The Development Of Colorimetric Assays To Determine The Identity And Frequency Of Specific Nucleobases In Dna Oligomers, Elizabeth Marie Thomas

Theses and Dissertations--Chemistry

Colorimetric methods combined with color-changing chemical probes are widely used as simple yet effective tools for identifying and quantifying a wide variety of molecules in solution. For nucleic acids (DNA and RNA), perhaps the most commonly used colorimetric probe is potassium permanganate, which can be used to identify single-stranded pyrimidines (thymine and cytosine) in polymers. Unfortunately, permanganate is not an effective probe for identifying purines (adenine and guanine), especially in the presence of the more reactive pyrimidines. Therefore, robust methods for discriminating between the purines remain elusive, thereby creating a barrier toward developing more complex colorimetric applications. In this dissertation, …

Toward The Probing Of Dhqs Activity By Protein Engineering Through The Introduction Of Unnatural Amino Acids And The Selection Of Trna/Trna Synthetase Pairs, Shaina E. Ives

Department of Chemistry: Dissertations, Theses, and Student Research

Protein engineering is a valuable tool that allows scientist to explore how an enzyme works by mutation of key residues. This method has been used to improve function or stability of enzymes, thus allowing their use in both the lab and in industry to be expanded. Genetic incorporation of unnatural amino acids (unAA) can be used with protein engineering to exceed the current limitations, due to the limited number of functional groups of the 20 common amino acids.

The majority of this thesis will discuss the progress on incorporating the various unAA into the active site of the enzyme, Dehydroquinate …

Bis(Spirolactam) 1,3-Double-Armed Calix[4]Arene Compounds And Their Application As Extractants For The Determination Of Heavy Metal Ions, Fintan Kelleher, Mary Deasy, James Ward, Li Li, Fiona Regan

Articles

A number of double-armed calix[4]arene compounds, with proline-derived spirolactam ligating groups on the lower rim, have been synthesised and investigated as extractants of toxic heavy metal ions from aqueous solution. Pedersen’s extraction technique was employed to determine the capability of these new 1,3-distal derived calix[4]arene spiroalactams to extract selected heavy metal ions (e.g. Pb²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Co²⁺) from an aqueous phase into an organic phase. The percentage extraction was calculated using UV-vis spectroscopy. All of the compounds synthesised demonstrated good selectivity for the heavy metals selected …

Synthesis And Flammability Testing Of Epoxy Functionalized Phosphorous-Based Flame Retardants, Vladimir Benin, Xuemei Cui, Alexander Morgan, Karl Seiwert

Chemistry Faculty Publications

Several potential new phosphorus-containing flame retardant molecules were evaluated for heat release reduction potential by incorporation of the molecules into a polyurethane, generated from methylene diphenyl diisocyanate and 1,3-propane diol. The heat release reduction potential of these substances was evaluated using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods to qualitatively evaluate their potential reactivity into the polyurethane prior to heat release testing. The functionality of the flame retardants was epoxide based that would potentially react with the diol during polyurethane synthesis. Flammability testing …

Antioxidant Mechanisms Of Glutathione Against Metal-Mediated Oxidative Dna Damage, Elias Eteshola

Graduate Theses - Chemistry and Biochemistry

Oxidative damage of DNA strands has been strongly linked with the development of diseases such as certain cancers, cystic fibrosis and Parkinson’s, as well as aging. In intercellular reactions involving hydrogen peroxide endogenous metals have been shown to increase the generation of site-specific base modifications through their formation of reactive oxygen species (ROS). The damage markers measured via HPLC are the 8-hydroxy-2’-deoxyguanosine (8-OHdG) and the dA-N1 oxide markers. The current study deals with the reduced form of the sulfur antioxidant glutathione (GSH) and elucidating its ameliorating effects against ROS formation. Comparative studies with the known radical-scavenging sulfur antioxidant dimethyl sulfoxide …

Diol-Mediated Versus Water-Mediated Proton Transfer Reactions, Angela Moses

DePaul Discoveries

The triple-proton-transfer reactions of 8H-1,8-naphthyridin-2-one (8H-naph) have been investigated by employing different ab initio quantum mechanical methods. The proton transfer reactions studied were facilitated through an adjacent 1,3-propanediol molecule or two adjacent water molecules. Identical proton transfer reactions were studied using a model system of 8H-naph to investigate the validity of computational approaches that use model systems to study more complex systems. The solvent effects on the structures were investigated for comparison to the initial gas phase calculations. The potential energy, reaction force, and work profiles were studied along the intrinsic reaction coordinate to monitor the developing proton transfer reactions.

Green Chemistry As A Tool For Understanding The Toxic Substances Control Act: A Lecture Module For Undergraduate Students, Molly R. Blessing

Honors Scholar Theses

The Toxic Substances Control Act (TSCA) is the central form of chemical regulation existent in the United States today, yet scientists are often unaware or uncertain of its provisions. Violations of TSCA by unknowing chemists set industry and government unnecessarily at odds. A lecture on TSCA was developed for undergraduate students that uses the concept of green chemistry to promote interest and incentivize learning. Green chemistry methods are cleaner and less wasteful than traditional chemical ones, and many companies using them are at the forefront of technological innovation. The lecture explains both green chemistry and TSCA, includes company case studies, …

Gas-Phase Reactions And Mechanistic Details Of Gold, Silver, And Iridium Complexes, Christopher Swift

Theses and Dissertations

The ever increasing demand for more efficient and environmentally benign routes for synthesizing target compounds, has led to the use of organometallic catalysts. This demand has created the need to understand the mechanistic details that are at work in these organometallic catalytic cycles. Along with this, there is a demand for new organometallic catalysts that are tailored for specific transformations. This presents a myriad of challenges for organometallic chemists. Unfortunately, it is often difficult to gain an understanding of the reaction mechanisms at work when the intermediates are too short lived to be observed in the condensed phase. It is …

Molecular Probes For The Detection Of Zn2+ And Fe3+ Ions, Erendra Manandhar

Dissertations

A number of molecular probes have been designed and synthesized for the detection of Zn²⁺ and Fe³⁺ ions. Two types of functional groups have been incorporated into the molecular scaffolds to utilize different fluorescent mechanisms. The first class of receptors contains a pyrene moiety. These molecular probes use the excimer mechanism for the detection of Zn²⁺ ion. The probes work well in an organic solvent with a detection limit of 20 nM (one ppb). Alternatives are made to make them water soluble, but this proved to be difficult. An interesting ion-induced self-assembly system will also be discussed. …

Heat Release Of Polyurethanes Containing Potential Flame Retardants Based On Boron And Phosphorus Chemistries, Vladimir Benin, Bastien Gardelle, Alexander Morgan

Chemistry Faculty Publications

Using a polyurethane of methylene diphenyl isocyanate and 1,3-propane diol, several new non-halogenated aromatic boron and phosphorus flame retardants were evaluated for heat release reduction potential using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods, and were then analyzed via spectroscopic methods to determine if the flame retardant was still present in the final product. PCFC testing on the resulting products showed that the flame retardant molecule can have different effects on heat release depending upon how it is mixed into the polyurethane. Some …

Determination Of Corrosion Inhibitor Lubricity Improver In Jet Fuel By Liquid Chromatography-Electrospray Ionization Mass Spectrometry, David W. Johnson, Milissa Flake, Ryan Adams

Chemistry Faculty Publications

Military jet fuel (JP-8) is very similar to commercial jet fuel (Jet A) except for the presence of three additives, fuel system icing inhibitor, corrosion inhibitor–lubricity improver (CI-LI), and antistatic additive, which are added to improve characteristics of JP-8. Of particular interest is the CI-LI additive; the most common active ingredient is a dimer of linoleic acid. This article focuses on quantification of the active ingredient in the CI-LI additive by liquid chromatography–mass spectrometry (LC–MS). This method will allow the determination of CI-LI content in military jet fuel samples.

Science Classics, Mark Masthay

Chemistry Faculty Publications

An essay on the impact of the works in the Imprints and Impressions: Milestones in Human Progress, an exhibition of rare books from the collection of Stuart Rose. Exhibition was held Sept. 29-Nov. 9, 2014, at the University of Dayton.

Investigations Into The Fluorescent Covalent Labeling Of Biomolecules Utilizing Rhodamine Dyes, Electrophilic Leaving Groups And Mrna Display., Susan D. Selaya

Theses and Dissertations

The discovery of a method by which proteins of interest can selectively be labeled with a probe of choice intracellularly is a longstanding goal in chemical biology research. Conventional labeling techniques have utilized large domain tags but despite the development of small labeling molecules there have been no short peptide sequences known to covalently label a small molecule without the aid of an enzymatic process or metal chelation. We aimed to find a sequence of nucleophilic peptides that reacted covalently and specifically with electrophilic small labeling molecules using mRNA display. Our goal was to show that an electrophilic small labeling …

Phosphate Esters, Thiophosphate Esters And Metal Thiophosphates As Lubricant Additives, David W. Johnson, John E. Hils

Chemistry Faculty Publications

Phosphate esters, thiophosphate esters and metal thiophosphates have been used as lubricant additives for over 50 years. While their use has been extensive, a detailed knowledge of how they work has been a much more recent development. In this paper, the use of phosphate esters and thiophosphate esters as anti-wear or extreme pressure additives is reviewed with an emphasis on their mechanism of action. The review includes the use of alkyl phosphates, triaryl phosphates and metal containing thiophosphate esters. The mechanisms of these materials interacting with a range of iron and steel based bearing material are examined.

Investigating Intermolecular Interactions In Crystalline Aspirin Using Cdft, Nicholas Turner, Tonglei Li, Mingtao Zhang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Drugs today are widely administered in their crystalline form, namely via tablets and capsules. The crystal structure of a drug molecule affects important drug qualities such as solubility, bioavailability, shelf life, and compaction properties. In order to form a basis for crystal structure prediction, it is necessary to first understand how intermolecular interactions cause molecules to pack in certain ways. Being able to predict and perhaps even control a drug molecule’s crystal structure will lead to the development of higher quality drugs that perform more consistently. Scientists and engineers do not fully understand the reasons for a molecule assuming a …

Structure, Theoretical Studies And Coupling Reactions Of Some New Cyclic Boronic Esters, Andrew Kuttler, Sravanthi Durganala, Albert Fratini, Alexander Morgan, Vladimir Benin

Chemistry Faculty Publications

The present report describes the X-ray structural and theoretical studies of some new pinacolboronate esters, and it also outlines the use of the target structures in Suzuki coupling reactions to produce new aromatic or heteroaromatic esters and amides. X-ray structural analysis of the studied compounds revealed that the pinacolborane ring's position with respect to the benzene ring varies, depending on the particular environment. An ortho-positioned carboxylic ester (methyl ester) causes a nearly perpendicular orientation of the pinacolborane unit with respect to the benzene ring, whereas an ortho-positioned amide (N,N-dimethylamide) causes the pinacolborane unit to orient itself nearly coplanar. A plausible …

Characterization By Nmr Of Reactants And Products Of Hydrofluoroether Isomers, Cf3(Cf2)3och3 And (Cf3)2c(F)Cf2och3, Reacting With Isopropyl Alcohol, Howard Knachel, Vladimir Benin, William E. Moddeman, Janine C. Birkbeck, Thomas A. Kestner, Tayna L. Young

Chemistry Faculty Publications

The 3M Company product Novec™ 71IPA DL, a mixture of methoxyperfluorobutane, methoxyperfluoroisobutane and 4.5 wt.% isopropyl alcohol, has been found to be very stable at ambient temperature, producing fluoride at the rate of ~1 ppm/year. Our earlier kinetic and theoretical studies have identified the reaction mechanism. This paper identifies the ¹H and ¹⁹F NMR chemical shifts, multiplicities, and coupling constants of reactants and the major products that result from aging the mixture in sealed Pyrex NMR tubes for periods up to 1.8 years at temperatures from 26 °C to 102 °C. Chemical shifts and coupling constants of fluorine …

Synthesis Of Rhenium And Manganese Pyridazoal Complexes, Jesse Evans

Masters Theses & Specialist Projects

Pyridazines are a heterocyclic aromatic compound containing a characteristic N-N bond that are utilized in many fields, including medicine and electronics. It is this latter field that Dr. Snyder's research group is focused upon. Organometallic compounds are a better conducting material than the current inorganic compounds used in electronics due to better conductance of electricity, lower production cost, and the ability to be formed into thin films. With this in mind, Dr. Snyder's research group has set out to synthesize organometallic compounds for this purpose. Following procedures set forth by Snyder etc, and altered to form an off-metal route, we …

Interaction Between Lubricants Containing Phosphate Ester Additives And Stainless Steels, David W. Johnson, Matthew Bachus, John E. Hils

Chemistry Faculty Publications

One way to improve fuel efficiency in today’s jet aircraft engines is to create an environment for higher operating temperatures and speeds. New and improved lubricants and bearing materials must be developed to remain stable in these elevated operating temperatures. Three lubricants, with varying amounts of tricresyl phosphate added as an anti-wear/extreme pressure additive were tested on two different stainless steels at varying temperatures ranging from 300 °C to 350 °C in vacuum. Significant decomposition of the lubricant base-stocks and the phosphate ester additive did occur in most of the trials resulting in the formation of carboxylic acids and phenols. …

Organic Thin-Film Transistors And Tips-Pentacene, Zachary Stewart

Lewis Honors College Capstone Collection

TIPS-Pentacene, an organic semiconductor characterized by its good electronic properties, solubility, and stability, is used primarily in organic thin-film transistors (OTFT). This research seeks to create an OTFT by crafting a stencil, depositing the source and drain onto a substrate’s surface, and processing TIPS-Pentacene onto the channel between them. In addition, if time permits, the electronic properties of several OTFTs will be compared to determine how to optimize their production.

Preparation Of Phosphonoterephthalic Acids Via Palladium-Catalyzed Coupling Of Aromatic Iodoesters, Nathaniel Ivan, Vladimir Benin, Alexander Morgan

Chemistry Faculty Publications

The current article reports in detail the preparation of two phosphonoterephthalic acids: 2-phosphonoterephthalic acid (1) and 2,5-diphosphonoterephthalic acid (2). Efficient, scalable syntheses have been developed for both compounds based on Pd-catalyzed coupling reactions of iodinated terephthalate esters. Phosphonoterephthalic acids are potentially useful as flame-retardant additives or as monomers for the construction of acid-pendant polymer chains.

Reaction Between Polyol-Esters And Phosphate Esters In The Presence Of Metal Carbides, David W. Johnson, Carolyn Iacullo, John E. Hils

Chemistry Faculty Publications

The reaction of metal carbides with polyol esters found in aerospace lubricants and phosphate esters commonly used as additives was investigated. Carbides were of particular interest since modern materials under consideration at high temperature bearings have surfaces that are primarily metal carbides. Vanadium and chromium carbide were found to react with the ester and phosphate ester by a transesterification reaction, producing an alkyl phosphate which is less stable than the aromatic phosphate esters. In the process, the metal carbide is converted to the metal phosphate and metal polyphosphate, evidenced by the infrared and Raman spectra of the solid residue and …

Reactions Of Methyl Perfluoroalkyl Ethers With Isopropyl Alcohol: Experimental And Theoretical Studies, Howard Knachel, Vladimir Benin, Chadwick Barklay, Janine C. Birkbeck, Billy D. Faubion, William E. Moddeman

Chemistry Faculty Publications

The reaction of an isomeric mixture of the methyl perfluoroalkyl ether, C4F9OCH3 (Novec-7100), in the presence of isopropyl alcohol (IPA) and/or water has been studied by measuring the rate of product formation using an ion-selective electrode (ISE) for fluoride ion, Karl Fisher coulometric titrations for water, and 1H and 19F NMR spectroscopy for product identification and rate studies. The results showed the methyl perfluoroalkyl ether to be very stable with products forming at the rate of ∼1 ppm per year at a laboratory temperature of 20 °C. Measurements over the temperature range of 6° to 100 °C were made on …

Synthesis Of Metal Organic Framework Composites For Improved Porosity, Jesse Murillo, Venkata P. Neti, Luis Echegoyen*

COURI Symposium Abstracts, Summer 2012

The synthesis of new highly porous composite materials, by combining Metal Organic Frameworks (MOFs) and graphene derivatives is described. The porosity of these composite materials is confirmed by pore volume, nitrogen uptake, BET and Langmuir surface area calculations. Structural information for the composites is accomplished through powder x-ray diffraction measurements, thermal gravimetric analysis and scanning electron microscopy. MOF-210, reported by Yaghi et al. in 2010, was chosen for composition with a graphene oxide composite due to its record holding pore size and internal surface area. The synthetic route to creation of precursors for MOF-210, as well as MOF-210 synthesis, is …

Ti2s@C78: A Non-Group-Iii Metal Sulfide Cluster Inside A C78 Cage, Vivian L. Triana, Fang-Fang Li, Luis Echegoyen*

COURI Symposium Abstracts, Summer 2012

After the discovery of the first nitride cluster metallofullerenes (NCFs), Sc₃N@C₈₀, in 1999, numerous cluster metallofullerenes have been prepared. However, the types of “clusterfullerenes” reported so far are quite limited: nitride cluster fullerenes (NCFs), carbide cluster metallofullerenes (CCFs), oxide cluster metallofullerenes (OCFs) and sulfide cluster fullerenes (SCFs). Given that almost all of the encaged metals for all of these reported cluster fullerenes are limited to group-III (Sc, Y, and lanthanide) metals, there are very few reports of the synthesis of cluster fullerenes with a non-group III metal, titanium (Ti), trapped inside a carbon cage. However, the …

Synthesis Of Graphene/Mof-177 Composites, Nathaly Ortiz, Venkata P. Neti, Luis Echegoyen

COURI Symposium Abstracts, Summer 2012

Metal Organic Frameworks (MOFs) are formed by the self-assembly of metallic ions and organic ligands. These compounds have shown excellent properties for gas adsorption and catalytic activity. MOF-177 has one of the highest hydrogen storage capacities reported for porous materials at ambient temperatures (surface area = 3400m²/g), reported previously by Yaghi et al. Graphene and graphene based materials have unique structural, mechanical, and electronic properties. Graphene oxide(GO) and functionalized graphene have been used as support and as a structural pieces in the construction of MOF’s in the past. Synthesis of MOF-5 on the surface of GO and …

Synthesis And Flame Retardant Testing Of New Boronated And Phosphonated Aromatic Compounds, Vladimir Benin, Sravanthi Durganala, Alexander Morgan

Chemistry Faculty Publications

The present report describes the preparation and use of some dimethyl terephthalate derivatives in transition metal-catalyzed coupling reactions to produce new reactive flame retardants. Dimethyl iodoterephthalate and dimethyl 2,5-diiodoterephthalate were successfully employed in the preparation of phosphonic and boronic esters and acids. The latter were tested for heat release with a microcombustion calorimeter (ASTM D7309) to determine the potential for heat release reduction of these flame retardant molecules. The results showed that the addition of boronic or phosphonic acids greatly lowered the heat release, due to a condensed phase (char formation) mechanism. Adding ester groups to the boronic acids or …

The Tetrafluoroborate Salt Of 4-Methoxybenzyl N-2-(Dimethylamino)Ethyl-N-Nitrosocarbamate: Synthesis, Crystal Structure And Dft Calculations, Helene Hedian, Vladimir Benin

Chemistry Faculty Publications

The tetrafluoroborate salt of 4-methoxybenzyl N-2-(dimethylamino)ethyl-N-nitrosocarbamate was prepared in two steps, via the corresponding carbamate. Its crystal structure is monoclinic, space group P21/c. The unit cell dimensions are: a = 19.499(8) Å, b = 5.877(3) Å, c = 15.757(7) Å, α = 90°, β = 110.019(7)°, γ = 90°, V = 1696.5(12) Å3, Z = 4. The structure exhibits an unexpected, pseudo-gauche conformation with respect to the C2–C3 bond, due to a stabilizing hydrogen bond between the carbonyl oxygen (O1) and the hydrogen atom at the trialkylammonium center (H3n), with a distance between them of …

Application Of Raman Spectroscopy To Lubricants, Lubricated Surfaces And Lubrication Phenomena, David W. Johnson

Chemistry Faculty Publications

Recent advances in lasers and detector technologies and the development of low-cost instruments and fiber-optic probes have brought about an explosion in the lubrication systems being studied by Raman spectroscopy. This article provides examples of the use of Raman spectroscopy in the study of lubrication phenomena, including the characterization of liquid lubricants, lubricant additives, and solid lubricants; the study of vapor-phase lubrication; and the use of coated nanoparticles as lubricants.

A Sodium Salt Of The Dimer Of Boronoterephthalic Acid Anhydride, Scott Simmons, Albert Fratini, Vladimir Benin

Chemistry Faculty Publications

The title compound, sodium bis­(6-carb­oxy-1-hy­droxy-3-oxo-1,3-dihydro-2,1-benzoxaborol-1-yl)oxidanium, Na+·C16H15B2O13-, was prepared in two steps from 2-bromo-p-xylene. Its crystal structure was determined at 140 K and has triclinic (P) symmetry. The compound presents a unique structural motif, including two units of the cyclic anhydride of boronoterephthalic acid, joined by a protonated, and thereby trivalent, oxonium center. Association in the crystal is realized by complementary hydrogen bonding of the carboxyl groups, as well as by coordination of the sodium cations to the oxygen centers on the five-membered rings.