Other Chemistry Commons^™

A Comparative Study Of Tin Electrorefining In Molten Licl–Kcl–Cacl₂: Experimental Two-Electrode Current Control And Theoretical Three-Electrode Potential Control, Bryant Johnson, George Ankrah, Ander Fuller, Devin Rappleye

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

Molten salt electrorefining is a mature technology for metal recovery, yet conventional current‑controlled, two‑electrode operation provides limited electrochemical selectivity and restricted insight into electrode‑specific behavior. In this work, a simplified model is developed to compare current‑controlled two‑electrode electrorefining data with a potential‑controlled three‑electrode electrorefining simulation using tin in molten LiCl–KCl–CaCl₂ as a surrogate for plutonium processing. The model examines anodic and cathodic limitations under fixed‑potential operation and evaluates implications for selectivity, efficiency, and runtime relative to experimentally demonstrated two‑electrode performance. Results indicate that independent potential control enables operation closer to thermodynamic selectivity limits, with the potential to suppress impurity oxidation …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Composition And Rich/Lean Loading-Dependent Density Measurements Of A Series Of Aqueous Ionic Amines For Co2 Capture, Claudia Nguyen

Honors Theses

As climate change worsens worldwide, there is a drive to develop more efficient and sustainable methods to mitigate its impact through carbon capture methods like carbon dioxide scrubbing. Carbon scrubbing directly captures carbon dioxide (CO2) emissions from industries or power plants before they are released into the environment. The CO2 captured can be utilized for various applications or can be stored underground. However, this method faces numerous challenges, such as the degradation of the solvent or corrosion of equipment. As a result, research has expanded to find a better medium to overcome these issues. In particular, aqueous ionic amines (AIA) …

Effects Of Chain Length, Saturation, And Bases On Saponification, Sarah Fenik

Williams Honors College, Honors Research Projects

This project will analyze the effects of chain length and saturation of fatty acids on saponification processes, as well as the effects of the base used in the reaction. Stearic acid, lauric acid, and oleic acid will be used for the fatty acid comparisons, and sodium hydroxide and potassium hydroxide will be used for the base comparisons. Stearic acid is considered a long chain fatty acid, while lauric acid is considered a short chain fatty acid. Oleic acid is a monounsaturated fatty acid. Five soap products are be made: sodium stearate, sodium laurate, sodium oleate, potassium stearate, and potassium oleate. …

Characterization Of Aromatic Stationary Phases For Uses In High Performance Liquid Chromatography, Anastasia Davis

Honors Theses

High Performance Liquid Chromatography (HPLC) is an analytical chemist technique used to separate a sample into its components to characterize and study a specific molecule or compound. Traditionally, High-Performance Liquid Chromatography in different industries, such as the environmental and pharmaceutical fields, uses stationary phases that are already well characterized, such as the C18 stationary phase for separation. However, aromatic stationary phases have recently been produced, which have phenyl groups bonded to the interior surface of the column. Still, they have not been well characterized because of how modern they are. This project characterized several aromatic stationary phases (Biphenyl, pentafluorophenyl, and …

Response To Replication Stress And Maintenance Of Genome Stability By Wrn, The Werner Syndrome Protein, David K. Orren, Amrita Machwe

Markey Cancer Center Faculty Publications

Werner syndrome (WS) is an autosomal recessive disease caused by loss of function of WRN. WS is a segmental progeroid disease and shows early onset or increased frequency of many characteristics of normal aging. WRN possesses helicase, annealing, strand exchange, and exonuclease activities and acts on a variety of DNA substrates, even complex replication and re- combination intermediates. Here, we review the genetics, biochemistry, and probably physiological functions of the WRN protein. Although its precise role is unclear, evidence suggests WRN plays a role in pathways that respond to replication stress and maintain genome stability particularly in telomeric regions.

Model To Demonstrate Effects Of Mass Transfer And Applied Current In An Electrolytic Cell, George Ankrah

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This study investigates the relationship between applied current and resulting cell potential in an electrolytic system, considering the transport of electroactive species. By applying Michael Faraday's laws of electrolysis and the Nernst-Planck equation, the behavior of electroactive species in diffusion-controlled systems with and without stirring is modeled. The plots demonstrate how stirring enhances ion transport and establishes a stable Nernst diffusion layer, affecting the kinetics of electrochemical reactions. Understanding these dynamics is crucial for optimizing electrolysis processes.

Investigating The Impact Of Secondary Activation Time On The Adsorption Properties Of Activated Biochar For Arsenic Removal From Wastewater, Achyuth Bharadwaj Rayarao

Graduate Theses and Dissertations (2019 - present)

Biochar, a naturally occurring and renewable carbon material, becomes porous through activation. Activated biochar is an ideal candidate for use as an adsorbent. The objective of this study is to investigate whether activated biochar derived from Colorado soft pine serves as a better adsorbent and demonstrates enhanced adsorption capabilities after undergoing secondary physical activation at various activation times. The effect of secondary action time on physical adsorption properties drawn from the analysis of isotherm plots, surface areas and pore size patterns were examined by using a physisorption analyzer. Chemical structures were identified using both ultimate and proximate analyses, while porosity …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

Design And Applications Of Fmoc-Histidine And Aspartic Acid Tripeptides As Proton Conductive Materials, Shejla S. Pollozi

Dissertations, Theses, and Capstone Projects

The increasing demand for clean and sustainable energy has driven forward rapid improvements in polymer-electrolyte fuel cells and the use of ion-conducting polymers (ionomers) as proton exchange membranes and catalyst binders. While perfluorinated electrolytes have been commercially used as conductive membranes for nearly four decades, a new class of sustainable, conductive materials has emerged, inspired by the efficiency of charge transport processes in biological systems. These molecules, knows as peptide amphiphiles (PAs), have gained popularity as building blocks for the bottom-up fabrication of nanomaterials through supramolecular self-assembly. Supramolecular nanostructures, often in the form of hydrogels, are held together via non-covalent …

Investigations Of Prokaryotic Defense Systems, Hannah Domgaard

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Bacteria are constantly threatened with infection by mobile genetic elements (MGE) such as bacteriophage and plasmids. Bacteriophage and plasmids require the bacteria's cellular infrastructure to replicate their genomes. Rampant replication can lead to cell death which is one reason why bacteria have developed a diverse array of immune systems to prevent or limit infection. This thesis studies three types of bacterial immune systems, type IV-A CRISPR-Cas (Clustered Regularly Interspaced Short Palindromic Repeat –CRISPR associated), type V-A2 CRISPR-Cas systems, and Wadjet systems.

The type IV-A system lies adjacent to a dinG-like helicase gene. Research has shown that this system can target …

Diffusion Of A Salt In An Aqueous Media, Aldaly Pineda Hernandez

Chemical Engineering Undergraduate Honors Theses

Diffusion is defined as the net transfer of a molecule from a high concentration region to a low concentration region. The concept of diffusion is used in a very important process called "desalination." Desalination is a separation process used to reduce the salt content dissolved in brackish water to make it suitable for human consumption, irrigation, and industrial use.

In desalination plants, it is important to monitor the constantly changing salt content of water, partly due to the diffusive effect. The main purpose of this experiment was to study the diffusion of NaCl in water at two NaCl concentrations. The …

Emergence Of Non-Hexagonal Crystal Packing Of Deswollen And Deformed Ultra-Soft Microgels Under Osmotic Pressure Control, Molla R. Islam, Rachel Nguyen, L. Andrew Lyon

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Highly solvent swollen poly(N-isopropylacrylamide-co-acrylic acid) microgels are synthesized without exogenous crosslinker, making them extremely soft and deformable. These ultralow crosslinked microgels (ULC) are incubated under controlled osmotic pressure to provide a slow (and presumably thermodynamically controlled) approach to higher packing densities. It is found that ULC microgels show stable colloidal packing over a very wide range of osmotic pressures and thus packing densities. Surprising observation of co-existence between hexagonal and square lattices is also made over the lower range of studied osmotic pressures, with microgels apparently changing shape from spheres to cubes in defects or grain boundaries. It is proposed …

Information Architecture For A Chemical Modeling Knowledge Graph, Adam R. Luxon

Theses and Dissertations

Machine learning models for chemical property predictions are high dimension design challenges spanning multiple disciplines. Free and open-source software libraries have streamlined the model implementation process, but the design complexity remains. In order better navigate and understand the machine learning design space, model information needs to be organized and contextualized. In this work, instances of chemical property models and their associated parameters were stored in a Neo4j property graph database. Machine learning model instances were created with permutations of dataset, learning algorithm, molecular featurization, data scaling, data splitting, hyperparameters, and hyperparameter optimization techniques. The resulting graph contains over 83,000 nodes …

Detection Of 2,4,6-Trinitrotoluene Using A Colorimetric Gold Nanoparticle Air Cassette Filter, Andrea I. Ferrer Vega

Master of Science in Forensic Science Directed Research Projects

Trinitrotoluene (TNT) is an explosive commonly used during military and terrorist activities. Current methods to identify this compound require sampling, transport and analysis at a forensic lab using analytical instrumentation. However, on-site detection is needed to assist efforts to prevent detonation. Gold nanoparticles have been used as sensors throughout the years due to their versatility and surface enhanced Raman scattering properties in the presence of an analyte and low limits of detection. By taking advantage of the Meisenheimer complex that TNT forms in the presence of amines, it is possible to determine its presence at picogram levels. Subsequently, adhering amine …

Using Batman Software To Analyze Metabolic Changes In Type 1 Diabetes-Susceptible Rats, Connor Hall

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Using Green Emitting Ph-Responsive Nanogels To Report Environmental Changes Within Hydrogels: A Nanoprobe For Versatile Sensing, Mingning Zhu, Dongdong Lu, Shanglin Wu, Qing Lian, Wenkai Wang, L. Andrew Lyon, Weiguang Wang, Paulo Bártolo, Brian R. Saunders

Engineering Faculty Articles and Research

Remotely reporting the local environment within hydrogels using inexpensive laboratory techniques has excellent potential to improve our understanding of the nanometer-scale changes that cause macroscopic swelling or deswelling. Whilst photoluminescence (PL) spectroscopy is a popular method for such studies this approach commonly requires bespoke and time-consuming synthesis to attach fluorophores which may leave toxic residues. A promising and more versatile alternative is to use a pre-formed nanogel probe that contains a donor/acceptor pair and then “dope” that into the gel during gel assembly. Here, we introduce green-emitting methacrylic acid-based nanogel probe particles and use them to report the local environment …

Nanogels And Microgels: From Model Colloids To Applications, Recent Developments, And Future Trends, Mattias Karg, Andrij Pich, Thomas Hellweg, Todd Hoare, L. Andrew Lyon, J. J. Crassous, Daisuke Suzuki, Rustam A. Gumerov, Stefanie Schneider, Igor I. Potemkin, Walter Richtering

Engineering Faculty Articles and Research

Nanogels and microgels are soft, deformable, and penetrable objects with an internal gel-like structure that is swollen by the dispersing solvent. Their softness and the potential to respond to external stimuli like temperature, pressure, pH, ionic strength, and different analytes make them interesting as soft model systems in fundamental research as well as for a broad range of applications, in particular in the field of biological applications. Recent tremendous developments in their synthesis open access to systems with complex architectures and compositions allowing for tailoring microgels with specific properties. At the same time state-of-the-art theoretical and simulation approaches offer deeper …

An Experimental And Numerical Investigation Of Flow Accelerated Flibe Corrosion, David B. Weitzel

Nuclear Engineering ETDs

Renewed interest in molten salt reactor technology has brought to light the need for a better understanding of FLiBe corrosion. To this end a flowing FLiBe corrosion test loop was designed to test the flow effects of FLiBe corrosion. The loop consists of a pump, melt tank, and stainless-steel tubing assembly that heats the molten salt to high temperatures and circulates it over test specimens. The experiment has been constructed and has completed initial shakedown testing.

To support the flowing FLiBe experiment, a numerical corrosion model that couples FLiBe electrochemistry, solid metal diffusion, and mass transport was implemented. The model …

Electrochemical Behavior Of Dense Electrodes For Impedancemetric Nox Sensors, Nabamita Pal

Doctoral Dissertations

NOx (NO and NO2) exhaust gas sensors for diesel powered vehicles have traditionally consisted of porous platinum (Pt) electrodes along with a dense ZrO2 based electrolyte. Advancement in diesel engine technology results in lower NOx emissions. Although Pt is chemically and mechanically tolerant to the extreme exhaust gas environment, it is also a strong catalyst for oxygen reduction, which can interfere with the detection of NOx at concentrations below 100 ppm. Countering this behavior can add to the complexity and cost of the conventional NO x sensor design. Recent studies have shown that dense electrodes are less prone to heterogeneous …

Technical Feasibility Of Selectively Separating Rare Earth Elements By Vapor Phase Extraction And Condensation, Katie Lyons

Graduate Theses & Non-Theses

Experiments were performed to evaluate the technical feasibility of selectively separating selected rare earth halides (bromides and chlorides) using a volatilization and condensation technique. Initially, optimum chloridizing and bromidizing roast parameters were secured in studies performed on reagent grade rare earth oxide samples and subsequently confirmed in tests performed on mineral ore and concentrate samples. The volatilization and condensation experiments were performed by placing the subject rare earth halide samples in an argon-purged multiple-zone tube furnace wherein the temperature profile was controlled to establish separate vaporization and condensation regions. Following each experiment, condensate and solid residue samples were analyzed to …

Synthesis, Characterization, And Activity Of Co/Fe Alumina/Silica Supported Ft Catalysts And The Study Of Promoter Effect Of Ruthenium, Sunday Azubike Esumike

Doctoral Dissertations

The alumina and hybrid alumina-silica FT catalyst were prepared by one-step solgel/oil-drop methods using metal-nitrate-solutions (method-I), and nanoparticle-metaloxides (method-2). The nanoparticle-metal-oxides did not participate in solubility equilibria in contrast to metal nitrate in method-1 causing no metal ion seepage; therefore, method-2 yields higher XRF metal loading efficiency than method-1. The thermal analysis confirmed that the metal loading by method-1 and method-2 involved two different pathways. Method-1 involves solubility equilibria in the conversion of metal-nitrate to metal- hydroxide and finally to metal-oxide, while in method-2 nanoparticle-metal-oxide remained intact during sol-gel-oil-drop and calcination steps.

The alumina supported catalysts were dominated by γ-alumina …

Direct Band Gap Gallium Antimonide Phosphide (Gasbxp1-X) For Solar Fuels., Harry Benjamin Russell

Electronic Theses and Dissertations

Photoelectrochemical water splitting has been identified as a promising route for achieving sustainable energy future. However, semiconductor materials with the appropriate optical, electrical and electrochemical properties have yet to be discovered. In search of an appropriate semiconductor to fill this gap, GaSbP, a semiconductor never tested for PEC performance is proposed here and investigated. Density functional theory (DFT+U) techniques were utilized to predict band gap and band edge energetics for GaSbP alloys with low amount of antimony. The overall objective of this dissertation is to understand the suitability of GaSb_xP_1-x alloys for photoelectrochemical water splitting application. Specifically, …

Cloning And Characterization Of Sas0754, A Hypothetical Protein From Community Associated Staphylococcus Aureus, Unknown Unknown

Symposium 2012

Community associated Staphylococcus aureus (strain MSSA476) is a gram positive cocci capable of infecting many different parts of the body and known to cause serious infections that can be fatal, such as bacterial arthritis and acute endocarditis. To find effective ways of fighting against CA-MRSA strains we must learn more about their ability to infect. The focus of this study was cloning and characterization of a protein referred to as SAS0754. The size of SAS0754 is 340 amino acids and the gene sequence is 1023 nucleotides. The hypothetical function of this protein is that it is an extracellular matrix binding …

A Convenient Synthesis Of 2,6-Dichlorohomonicotinic Acid, Chase Buchanan, Richard W. Fitch

Symposium 2012

In our synthetic efforts toward the alkaloid phantasmidine, we required a convenient source of the title compound. Herein, we describe a short synthesis of 2,6-dichlorohomonicotinic acid by direct allylation of 2,6-dichloropyridine with LDA/allyl chloride, followed by permanganate oxidation of the side chain [figure1]. Yields for the allylation are high, while permanganate oxidation required more adjustment. Successful conditions require the modest acidification of the mixture with acetic acid and cleanup by acid base workup. No chromatography is needed.

Convenient Parallel Synthesis Of Alkyl- And Aryl-S-Tert-Butyl Thiothers, Rebecca Norcross, Jessica Stanfield, Richard W. Fitch

Symposium 2012

While preparing novel cysteine derivatives as oxidation catalysts, we needed S-tert-butylcysteine. We also examined acid-promoted tert-butylation of thiols using tert-butanol as reagent and solvent. While cysteine and aminoethanethiol work well using tBuOH in 4M HCl, other thiols fail in the aqueous environment and aerobic conditions. We examined a variety of aliphatic and aromatic thiols in tBuOH with H2SO4 catalysis and found that argon sparging and the use of 1 eq of acid led to good yields in a parallel format.

A Modified Surface On Titanium Deposited By A Blasting Process, Caroline O' Sullivan, Peter O'Hare, Greg Byrne, Liam O'Neill, Katie B. Ryan, Abina M. Crean

Publications

Abstract

: Hydroxyapatite (HA) coating of hard tissue implants is widely employed for its biocompatible and osteoconductive properties as well as its improved mechanical properties. Plasma technology is the principal deposition process for coating HA on bioactive metals for this application. However, thermal decomposition of HA can occur during the plasma deposition process, resulting in coating variability in terms of purity, uniformity and crystallinity, which can lead to implant failure caused by aseptic loosening. In this study, CoBlast™, a novel blasting process has been used to successfully modify a titanium (V) substrate with a HA treatment using a dopant/abrasive regime. …

The Impact Of Driving Conditions On Phev Battery Performance, Nathan Christensen, John Patten, Steven Srivastava, Gary P. Nola

Green Manufacturing Research Journal

The battery performance of a modified Prius with a 5 kWh plug-in battery was documented for a year to determine the impact of environmental conditions and user attributes on vehicle performance.  Both fuel economy and pure electrical efficiency were compared to ambient temperature.  The fuel economy has a positive relationship with ambient temperature until approximately 70˚F where the efficiency begins to drop.  Electrical performance has a positive linear relationship with ambient temperature.  With the emergence of electric vehicles (EVs) and PHEVs from a variety of automotive manufacturers, information on EV and PHEV performance for consumers will become more important.