Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1741 - 1770 of 3581

Full-Text Articles in Materials Chemistry

Effect Of Surface Omniphobicity On Drying By Forced Convection, Madani A. Khan, Jeffrey Alston, Andrew Guenthner Aug 2015

Effect Of Surface Omniphobicity On Drying By Forced Convection, Madani A. Khan, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Low energy surfaces can strongly repel both oil and water. Recently these surfaces have been fabricated on various substrates including fabric, aluminum, stainless steel and many other materials. In this experiment we explore the use of low energy surface deposition on aluminum alloy, stainless steel and silicon substrates, to enhance the drying rate of liquids removed from the surface by forced convection. We control surface roughness by substrate abrasion and by the growth of Al2O3 nanograss to enhance liquid repellence by use of a hierarchical texture. Liquid repellence of the substrates is measured by contact angles of …

Go to article

Synthesis And Flammability Testing Of Epoxy Functionalized Phosphorous-Based Flame Retardants, Vladimir Benin, Xuemei Cui, Alexander Morgan, Karl Seiwert Aug 2015

Synthesis And Flammability Testing Of Epoxy Functionalized Phosphorous-Based Flame Retardants, Vladimir Benin, Xuemei Cui, Alexander Morgan, Karl Seiwert

Chemistry Faculty Publications

Several potential new phosphorus-containing flame retardant molecules were evaluated for heat release reduction potential by incorporation of the molecules into a polyurethane, generated from methylene diphenyl diisocyanate and 1,3-propane diol. The heat release reduction potential of these substances was evaluated using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods to qualitatively evaluate their potential reactivity into the polyurethane prior to heat release testing. The functionality of the flame retardants was epoxide based that would potentially react with the diol during polyurethane synthesis. Flammability testing …

Go to article

Three-Dimensional Scaffolds Of Graphene, Carbon Nanotubes And Transition-Metal Oxides For Applications In Electronics, Sensors And Energy Storage, Gilbert N. Mbah Aug 2015

Three-Dimensional Scaffolds Of Graphene, Carbon Nanotubes And Transition-Metal Oxides For Applications In Electronics, Sensors And Energy Storage, Gilbert N. Mbah

Department of Chemistry: Dissertations, Theses, and Student Research

Electronics, sensors and energy storage devices are the new waves behind economic development, security and communication1. Engineering small sizes of electronic, sensors and energy storage devices is the hurdle limiting efficient, portable and vast applications of Nano-devices for economic, security and communication advancement2. Silicon the major material used in transistors has approached its limit to fabricated Nano-devices3. The discovery of free standing, one atomic layer thick and two-dimensional graphene sheets with high conductivity, inert, high specific surface area, stable and high tensile strength material in 2004 has shown capabilities to replaced silicon in electronics, …

Go to article

Dft Analysis Into The Intermediates Of Nickel Pyridenthiolate Catalysed Proton Reduction, Carolyn N. Virca, Theresa M. Mccormick Jul 2015

Dft Analysis Into The Intermediates Of Nickel Pyridenthiolate Catalysed Proton Reduction, Carolyn N. Virca, Theresa M. Mccormick

Chemistry Faculty Publications and Presentations

Nickel pyridine 2-thiolate (Ni(PyS)3 −) has shown good stability and activity as a H2 generation catalyst for use in solar energy storage. The experimentally proposed catalytic pathway is explored using DFT calculations. Free energy changes along the reaction coordinate, spin states, localization of charge and geometry of the intermediates were explored. Calculations were performed using Gaussian 09 with a B3P86/ 6-31+G(d) basis set and a CPCM water solvation model. Of particular interest were our findings that the first reduction occurs at the nickel rather than through non-innocent ligands and that water coordination is not favourable although protonation of …

Go to article

The Quantum Efficiency Of Cdse Semiconducting Nanocrystals, Charles Bledsoe Jul 2015

The Quantum Efficiency Of Cdse Semiconducting Nanocrystals, Charles Bledsoe

Undergraduate Theses

CdSe molecules are semiconducting nanocrystals that absorb visible light and emit broad wavelengths of light in response. They utilize electromagnetic radiation not only for emitting broad wavelengths of visible light, but for fluorescence, conducting electricity, and vibrational relaxation. The Thermal Lensing technique (TL) can be used to study the lifetimes of the excited state transitions and the various nonradiative processes molecules can undergo in order to better understand the excited state dynamics of semiconducting nanocrystals, and in turn, better understand how these molecules may be applied in solar cells, lasers, and fluorescence labeling. Using known methods, four samples of CdSe …

Go to article

Nanostructured Polymer Lithography For Photovoltaic Applications, Allison J. Christy, Nicholas L. Mckibben, Jerry D. Harris (Mentor), David Estrada (Mentor) Jul 2015

Nanostructured Polymer Lithography For Photovoltaic Applications, Allison J. Christy, Nicholas L. Mckibben, Jerry D. Harris (Mentor), David Estrada (Mentor)

Idaho Conference on Undergraduate Research

The self-assembly of diblock copolymers into ordered domains holds great potential to furthering the efficiency of photovoltaic devices. Solutions containing polystyrene-block-poly(ethylene oxide) (PS-b-PEO) and poly(methyl methacrylate) (PMMA) were applied to silicon wafers from toluene solutions. Hexagonally ordered domains, with pore sizes ranging from 10-30 nm, were obtained by annealing films in solvent vapor, with the best results produced from a humidified benzene environment. Exposing the films to UV light cross-linked the polystyrene matrix and degraded the PMMA. Removal of the PMMA and PEO produced an ordered polystyrene template, which can be used for nanolithography for the …

Go to article

Current Status And Prospect Of Cathode Materials For Lithium Sulfur Batteries, Lan Zhou, Ai-Shui Yu Jun 2015

Current Status And Prospect Of Cathode Materials For Lithium Sulfur Batteries, Lan Zhou, Ai-Shui Yu

Journal of Electrochemistry

Elemental sulfur has been extensively investigated as a promising candidate of cathode material for next generation lithium secondary batteries. However, some troublesome issues, such as the low electric conductivity of sulfur (5×10-30 S·cm-1) and the high solubility of lithium polysulfide intermediates in organic electrolytes, resulting in a low utilization of active material and a redox shuttling of dissolved polysulfide ions between the sulfur cathode and the lithium anode, which eventually leads to a deposition of insoluble and insulating Li2S2/Li2S on the electrode surface and a fast reduction in the specific capacity. …

Go to article

Research Status And Application Prospects Of Limnpo4 As A New Generation Cathode Material For Lithium-Ion Batteries, Lai-Fen Qin, Yong-Gao Xia, Li-Peng Chen, Hua-Sheng Hu, Feng Xiao, Zhao-Ping Liu Jun 2015

Research Status And Application Prospects Of Limnpo4 As A New Generation Cathode Material For Lithium-Ion Batteries, Lai-Fen Qin, Yong-Gao Xia, Li-Peng Chen, Hua-Sheng Hu, Feng Xiao, Zhao-Ping Liu

Journal of Electrochemistry

Olivine-structured lithium manganese phosphate (LiMnPO4) has the following advantages: excellent thermal stability, low cost, high safety and environmental benignity. Importantly, the theoretical energy density of LiMnPO4 is about 20% higher than that of commercialized LiFePO4 due to its higher Li+ intercalation potential of 4.1 V (vs. Li+/Li). Moreover, the high operating voltage of LiMnPO4 is compatible with present non-aqueous organic electrolytes of lithium-ion batteries. Therefore, LiMnPO4 is considered as a next generation cathode material for lithium-ion batteries. However, LiMnPO4 suffers from poor electronic conductivity and low lithium diffusivity, resulting in …

Go to article

Preparations And Applications Of Layered Carbon And Layered Carbon-Pbso4 Composite, Shu-Kai Zhang, Hao Zhang, Wei-Hua Xue, Jie Cheng, Wen-Feng Zhang, Gao-Ping Cao, Hai-Lei Zhao, Yu-Sheng Yang Jun 2015

Preparations And Applications Of Layered Carbon And Layered Carbon-Pbso4 Composite, Shu-Kai Zhang, Hao Zhang, Wei-Hua Xue, Jie Cheng, Wen-Feng Zhang, Gao-Ping Cao, Hai-Lei Zhao, Yu-Sheng Yang

Journal of Electrochemistry

The layered carbon materials (similar to graphene) have been synthesized by chemical vapor deposition (CVD) on the cheap catalyst (potassium or sodium carbonate substrate). The layered-carbon- lead sulfate (PbSO4) composite could be prepared by in situ chemical deposition based on the layered carbon. The XRD, SEM and TEM results showed that the layered carbon materials was amorphous carbon layer, and the composite was a compound made of fine lead sulfate grains and layered carbon. Thermogravimetric analysis determined the carbon content in the composite. Adding a certain amount of layered carbon or layered-carbon-PbSO4 composite into negative active materials …

Go to article

Preparation Of Zro2-Doped Nb/Pbo2 Electrode And Electrocatalytic Performance Of Methyl Orange Degradation, Li Zhang, Wen-Yan Dong, Tai-Lai Yang, Zhen-Hai Liang Jun 2015

Preparation Of Zro2-Doped Nb/Pbo2 Electrode And Electrocatalytic Performance Of Methyl Orange Degradation, Li Zhang, Wen-Yan Dong, Tai-Lai Yang, Zhen-Hai Liang

Journal of Electrochemistry

The zirconium oxide (ZrO2)-doped niobium based lead oxide (Nb/PbO2) electrode was prepared by electrodeposition. The microstructures and electrochemical properties of Nb/ZrO2+PbO2 electrode were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), linear sweep voltammetry, electrochemical impedance spectroscopy and cyclic voltammotry. In addition, the Nb/PbO2 electrode was used as an anode for the electrochemical degradation of methyl orange (MO). Results revealed that the ZrO2 doping made the Nb/PbO2 electrode surface denser and rougher with smaller sized crystal particles, which increased the specific surface area and enhanced the electrocatalytic activity of the …

Go to article

Electrochemical Mass Spectrometric Study Of Lithium-Oxygen Batteries, Xin-Xiu Yan, Li-Po Ma, Zhang-Quan Peng Jun 2015

Electrochemical Mass Spectrometric Study Of Lithium-Oxygen Batteries, Xin-Xiu Yan, Li-Po Ma, Zhang-Quan Peng

Journal of Electrochemistry

Mass Spectrometry, coupled with electrochemistry, is a powerful research tool to study mechanisms for a broad range of electrode reactions by identifying and quantifying reaction products and intermediates. In this review, we summarize the recent advances in the Li-O2 battery researches offered by electrochemical mass spectrometry based on our group investigations. These include the research progresses in electrolytes, cathode materials (electrocatalysts), and parasitic reactions, i.e., the key issues associated with Li-O2 research. In addition, we also discuss the effects of irreversible side reactions involved in battery systems on charge and discharge processes.

Go to article

Synthesis Of Graphene Wrapped Li-Rich Layered Metal Oxide And Its Electrochemical Performance, Meng-Yan Hou, Ke Wang, Xiao-Li Dong, Yong-Yao Xia Jun 2015

Synthesis Of Graphene Wrapped Li-Rich Layered Metal Oxide And Its Electrochemical Performance, Meng-Yan Hou, Ke Wang, Xiao-Li Dong, Yong-Yao Xia

Journal of Electrochemistry

In present work, lithium-rich layered transition metal oxide (LLO) was synthesized by a co-precipitation method in combination with a solid-state reaction. The graphene wrapped Li-rich layered oxide composite (LLO/Gra) was obtained by sintering the LLO/GO composite at 300 oC for 30 min in an air. The morphologies and the electrochemical performances were characterized by means of SEM, TEM, XRD, XPS, EIS and charge/discharge tests. The results indicated that the LLOe particles were uniformly wrapped with graphene. The resulting material exhibited better rate capability than that of pristine LLO since the wrapped graphene demonstrated the enhanced electronic conductivity. Accordingly, the …

Go to article

Research Progress In Carbon Coating On Lifepo4 Cathode Materials For Lithium Ion Batteries, Ning Zhang, Yong-Chang Liu, Cheng-Cheng Chen, Zhi-Qiang Zhu, Zhan-Liang Tao, Jun Chen Jun 2015

Research Progress In Carbon Coating On Lifepo4 Cathode Materials For Lithium Ion Batteries, Ning Zhang, Yong-Chang Liu, Cheng-Cheng Chen, Zhi-Qiang Zhu, Zhan-Liang Tao, Jun Chen

Journal of Electrochemistry

Olivine-structured LiFePO4 has been received much attention because of its flat voltage profile, low cost, abundant material supply and better environmental compatibility. However, the poor electronic and ionic conductivities have limited its application in industry. One of the best methods to improve the electrochemical performance is carbon coating. In this review, we summarize the recent developments of LiFePO4/C cathode. Moreover, the different effects caused by coating methods and carbon sources, as well as the mechanism of carbon coating on the properties of LiFePO4/C are reviewed.

Go to article

Enhancing Stability Of Pem Fuel Cell Catalysts Via Support Changing, Xiao-Hong Xie, Zi-Dong Wei Jun 2015

Enhancing Stability Of Pem Fuel Cell Catalysts Via Support Changing, Xiao-Hong Xie, Zi-Dong Wei

Journal of Electrochemistry

The Pt/C catalyst with highly dispersed Pt nanoparticles supported on carbon has been widely used as the state-of the-art catalyst in proton exchange membrane fuel cells (PEMFCs), while the durability of Pt/C is one of the major barriers for large-scale applications of PEMFCs. Thus, enhancing the stability of Pt/C has been a hot issue in this field. In this review, we summarize the recent progress in enhancing the catalyst stability in the view of support material. The future prospects of the PEMFCs catalyst should focus on adopting more stable supports or strengthening the interactions between Pt and supports.

Go to article

Lithium Air Batteries: Non-Aqueous And Hybrid Systems, Sheng-Fu Tong, Ping He, Xue-Ping Zhang, Shi-Yong Zhao, Hao-Shen Zhou Jun 2015

Lithium Air Batteries: Non-Aqueous And Hybrid Systems, Sheng-Fu Tong, Ping He, Xue-Ping Zhang, Shi-Yong Zhao, Hao-Shen Zhou

Journal of Electrochemistry

Developing energy storage devices and new materials, which match the requirements in electric vehicles (EVs) and hybrid electric vehicles (HEVs), is an effective way to balance the contradiction between the social development and the shortage of fossil energy and environment pollution. Rechargeable lithium-air (Li-air) batteries consisting of Li and oxygen as the anodic and cathodic reactants, respectively, have attracted much attention during the past decade due to their high theoretical specific energy. According to work conditions, the most studied types of Li-air batteries are non-aqueous, hybrid, and solid state electrolyte Li-air batteries. Challenges still exist in cathodes, anodes, electrolytes and …

Go to article

Pt/C Modified Proton Exchange Membrane For Improved Fuel Cell Performance, Zhi Cui, Chao Wang, Shui-Yun Shen, Feng-Jing Jiang, Jun-Liang Zhang Jun 2015

Pt/C Modified Proton Exchange Membrane For Improved Fuel Cell Performance, Zhi Cui, Chao Wang, Shui-Yun Shen, Feng-Jing Jiang, Jun-Liang Zhang

Journal of Electrochemistry

The property of proton exchange membrane greatly affects the performance of proton exchange membrane fuel cells (PEMFC). During the operation of a PEMFC, the water produced at the cathode, the water vapor from the humidified feed gas and the water migrated by electro-dragging will reach a balance in the membrane and determine the resistance of PEMFC, and thus affect the performance of PEMFC. Normally, the PEMFC performance strongly depends on the relative humidity of the feed gas, and the performance decreases at lower humidity as a result of lower proton conductivity of the membrane. In this paper, we proposed to …

Go to article

Electrolytes For Lithium And Lithium-Ion Batteries, Zong-Rang Zhang Jun 2015

Electrolytes For Lithium And Lithium-Ion Batteries, Zong-Rang Zhang

Journal of Electrochemistry

This is an up-to-date book published by Springer last year and focuses on the field of the electrolytes for lithium and lithium-ion batteries. A brief introduction and review of this book are given in this paper. The main contents of this book are introduced briefly in the order of ten different chapters along with a short review of recent progress in those fields.

Go to article

Kinetic Study Of The Oxygen Reduction Reaction On Α-Ni(Oh)2 And Α-Ni(Oh)2 Supported On Graphene Oxide, Elaheh Farjami, L. Jay Deiner Jun 2015

Kinetic Study Of The Oxygen Reduction Reaction On Α-Ni(Oh)2 And Α-Ni(Oh)2 Supported On Graphene Oxide, Elaheh Farjami, L. Jay Deiner

Publications and Research

The kinetics of the oxygen reduction reaction on α-Ni(OH)2 and α-Ni(OH)2 supported on graphene oxide (α-Ni(OH)2/GO) were investigated using rotating disk linear sweep voltammetry in alkaline solutions of varying oxygen and hydroxyl concentrations. Over the full hydroxyl concentration range (0.05 M to 0.5M), α-Ni(OH)2/GO displayed higher activity than unsupported α-Ni(OH)2. The electron transfer numbers were 2.9 ± 0.2 for α-Ni(OH)2, 3.4 ± 0.1 for α-Ni(OH)2/GO at low [OH−], and 3.8–3.9 for α-Ni(OH)2/GO at high [OH−]. Compared to α-Ni(OH)2, α-Ni(OH)2/GO displayed higher chemical reaction rate constants and higher electron transfer rate constants. These differences suggest that the synergy between the α-Ni(OH)2 …

Go to article

Corrosion Protection Of 304 Stainless Steel With Melting Gels Coatings, Mario Aparicio, Andrei Jitianu, Gabriela Rodriguez, Ahmad Dengah, Kutaiba Marzoki, Jadra Mosa, Lisa C. Klein Jun 2015

Corrosion Protection Of 304 Stainless Steel With Melting Gels Coatings, Mario Aparicio, Andrei Jitianu, Gabriela Rodriguez, Ahmad Dengah, Kutaiba Marzoki, Jadra Mosa, Lisa C. Klein

Publications and Research

Methyl-substituted melting gels were used to coat AISI 304 stainless steel substrates. Crack-free coatings up to 1 mm in thickness were obtained. SEM micrographs of cross-sections con fi rm good adhesion to the surface. Samples were subjected to structural characterization using FT-IR, and Raman spectroscopy. Mechanical properties were investigated by micro-scratch tests. Electrochemical analyses (anodic polarization and electrochemical impedance spectroscopy) were performed in 3.5% NaCl solutions. Electrochemical tests show excellent performance of the coatings against corrosion with no sign of degradation after several months of immersion.

Go to article

Titanium Trisulfide Monolayer: Theoretical Prediction Of A New Direct-Gap Semiconductor With High And Anisotropic Carrier Mobility, Jun Dai, Xiao Cheng Zeng Jun 2015

Titanium Trisulfide Monolayer: Theoretical Prediction Of A New Direct-Gap Semiconductor With High And Anisotropic Carrier Mobility, Jun Dai, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

A new two-dimensional (2D) layered material, namely, titanium trisulfide (TiS3) monolayer, is predicted to possess novel electronic properties. Ab initio calculations show that the perfect TiS3 monolayer is a direct-gap semiconductor with a bandgap of 1.02 eV, close to that of bulk silicon, and with high carrier mobility. More remarkably, the in-plane electron mobility of the 2D TiS3 is highly anisotropic, amounting to about 10,000 cm2 V−1 s−1 in the b direction, which is higher than that of the MoS2 monolayer, whereas the hole mobility is about two orders of magnitude lower. …

Go to article

Effect Of Surfactant Architecture On Conformational Transitions Of Conjugated Polyelectrolytes, Greg A. Braggin Jun 2015

Effect Of Surfactant Architecture On Conformational Transitions Of Conjugated Polyelectrolytes, Greg A. Braggin

Master's Theses

Water soluble conjugated polyelectrolytes (CPEs), which fall under the category of conductive polymers, possess numerous advantages over other conductive materials for the fabrication of electronic devices. Namely, the processing of water soluble conjugated polyelectrolytes into thin film electronic devices is much less costly as compared to the processing of inorganic materials. Moreover, the handling of conjugated polyelectrolytes can be performed in a much more environmentally friendly manner than in the processing of other conjugated polymers because conjugated polyelectrolytes are water soluble, whereas other polymers will only dissolve in toxic organic solvents. The processing of electronic devices containing inorganic constituents such …

Go to article

New Dion-Jacobson And Ruddlesden- Popper Layered Perovskites Prepared By Topochemical Methods, Dariush Montasserasadi May 2015

New Dion-Jacobson And Ruddlesden- Popper Layered Perovskites Prepared By Topochemical Methods, Dariush Montasserasadi

LSU New Orleans Theses and Dissertations

Layered perovskites can be classified in three major groups: Dion-Jacobson AA′n-1BnO3n+1, Ruddlesden-Popper A2A′n-1BnO3n+1,and Aurivillius phase (Bi2O2)A′n-1BnO3n+1. (A: Alkali metal, Alkali-earth metal; A′: Lanthanides and Bi; B: Ti, Nb, Ta; n: thickness of slabs). For more than two decades researchers have shown much interest in this series because of their magnetic and electrical properties. Tuning synthesis parameters such as temperature, time, and host structure can be used to direct such properties. Low temperature synthetic methods (topochemical methods) allow …

Go to article

Thermoelectric Properties Of Nano-Meso-Micro Β-Mno2 Powders As A Function Of Electrical Resistance: Experiment And Theory, Morgan Hedden May 2015

Thermoelectric Properties Of Nano-Meso-Micro Β-Mno2 Powders As A Function Of Electrical Resistance: Experiment And Theory, Morgan Hedden

Senior Honors Projects, 2010-2019

In this work, the thermoelectric properties of Beta-MnO2 powders as a function of electrical resistance are measured and compared to theoretical models. The discovery of a giant Seebeck coefficient by Song et al. in these powders rejuvenated interest in understanding the physical mechanism behind it. A simple pestle and mortar method was used to modify the MnO2 powder sizes. We and the largest S coefficient, power factor, and thermal conductivity values were found to be S=-316 uV/K, (sigma)S2 =5.8x10-7 W/mK2 and k=0.2096 W/(mK), all observed at a particle electrical resistance of R=9.8 Ohms. From these …

Go to article

Tempo-Containing Romp Polymers As A Component For Treatment Of Traumatic Brain Injuries, Cameron H. Feriante May 2015

Tempo-Containing Romp Polymers As A Component For Treatment Of Traumatic Brain Injuries, Cameron H. Feriante

Honors College Theses

During a traumatic brain injury (TBI) sustained in combination with hemorrhagic shock the brain undergoes anoxic conditions resulting from swelling and blood loss. Traditional intravenous solutions are used to replace blood volume, but are unable to replace the blood’s oxygen carrying capacity. A proposed treatment based on isotonic solutions containing hemoglobin-based oxygen carriers (HBOC’s) which were intended to provide readily available oxygen was developed. However, cell-free hemoglobin was shown to have excessive oxidative potential. Polynitroxylated Pegylated Hemoglobin (PNPH) was developed to address this shortcoming. During PNPH synthesis a combination of polyethylene glycol (PEG) and (2,2,6,6-tetramethylpiperidin-1-yl)oxidanyl (TEMPO), is bound to the …

Go to article

Study Of Mechanical Properties Of Pva Fiber-Reinforced Concrete With Raman Spectroscopic Analysis, Ramyasree Annam May 2015

Study Of Mechanical Properties Of Pva Fiber-Reinforced Concrete With Raman Spectroscopic Analysis, Ramyasree Annam

Masters Theses & Specialist Projects

The brittleness of concrete has always been a safety and economic issue of great concern. The low tensile strength of concrete is the cause of its intrinsic brittle nature. This is critical considering the amount of concrete used for the construction of highways, buildings, and other facilities. The mechanical properties of concrete must be improved to provide upgraded construction. Crack resistant and durable concrete has always been a major goal for engineers. Many approaches have been tried to make concrete a better construction material. Fiber reinforcement is an approach which has been shown to improve the quality and durability of …

Go to article

Green Chemistry As A Tool For Understanding The Toxic Substances Control Act: A Lecture Module For Undergraduate Students, Molly R. Blessing May 2015

Green Chemistry As A Tool For Understanding The Toxic Substances Control Act: A Lecture Module For Undergraduate Students, Molly R. Blessing

Honors Scholar Theses

The Toxic Substances Control Act (TSCA) is the central form of chemical regulation existent in the United States today, yet scientists are often unaware or uncertain of its provisions. Violations of TSCA by unknowing chemists set industry and government unnecessarily at odds. A lecture on TSCA was developed for undergraduate students that uses the concept of green chemistry to promote interest and incentivize learning. Green chemistry methods are cleaner and less wasteful than traditional chemical ones, and many companies using them are at the forefront of technological innovation. The lecture explains both green chemistry and TSCA, includes company case studies, …

Go to article

Synthesis, Characterization, And Catalytic Applications Of Porous Transition-Metal Oxide Systems For The Conversion Of Biomass, Anton Gudz May 2015

Synthesis, Characterization, And Catalytic Applications Of Porous Transition-Metal Oxide Systems For The Conversion Of Biomass, Anton Gudz

Honors Scholar Theses

The development of innovative strategies and environmentally-friendly resources for the sustainable production of fuels and chemicals from renewable materials has recently received much interest in the scientific world. Among such resources, biomass has enormous potential as a raw material for generation of green fine chemicals to replace the petroleum feedstocks currently in place. Biomass derived carbohydrates can be converted into such valuable platform chemicals as levulinates, 5-hydroxymethyl furfural (HMF), and lactates. In order to catalyze the biomass conversion process, porous transition-metal oxide catalytic systems have been developed in this study. High catalytic activities and potential for reusability of such systems …

Go to article

Researches On In-Situ And Ex-Situ Characterization Techniques In Lithium Batteries, Wen-Jun Li, Jie-Yun Zheng, Lin Gu, Hong Li Apr 2015

Researches On In-Situ And Ex-Situ Characterization Techniques In Lithium Batteries, Wen-Jun Li, Jie-Yun Zheng, Lin Gu, Hong Li

Journal of Electrochemistry

Electrochemical performance of Lithium batteries is directly linked to interfacial transports, reactions and storing behaviors of electrons and ions at bulk-surface interfaces. It is extremely important to conduct evolution studies from atomic level to macro level in electron structures, crystal structures, microstructures and morphologies, chemical compositions and physical properties of battery materials at equilibrium and nonequilibrium in order to understand various structure-performance relations in lithium ion batteries. Advanced in-situ and ex-situ characterization techniques have been used widely to clarify scientific and technological problems in lithium batteries. This paper summarizes our efforts on battery researches using various experimental techniques, including in …

Go to article

Recent Research Progress For Non-Pt-Based Oxygen Reduction Reaction Electrocatalysts In Fuel Cell, Ping Song, Ming-Bo Ruan, Jing Liu, Guang-Jun Ran, Wei-Lin Xu Apr 2015

Recent Research Progress For Non-Pt-Based Oxygen Reduction Reaction Electrocatalysts In Fuel Cell, Ping Song, Ming-Bo Ruan, Jing Liu, Guang-Jun Ran, Wei-Lin Xu

Journal of Electrochemistry

The expensive Pt-based catalyst suffers from its susceptibility to time-dependent drift, methanol crossover, and carbon monoxide (CO) deactivation, which will block the large-scale commercial application of fuel cells. It is, therefore, necessary to develop efficient, low-cost, highly stable non-precious metal oxygen reduction reaction (ORR) catalysts with high catalytic performance. Here, we will pay attention to the research progress of non-precious metal and heteroatom-doped (N, B, P, S, F) metal-free ORR catalysts. Importantly, we mainly focus on the work developed by Xu’s group with the Fe-based non-precious metal and F/NF-doped metal-free ORR catalysts. The purpose of these works is to improve …

Go to article

Research Progress Of Mn-Based Lithium-Rich Cathode Materials For Li-Ion Batteries, Luo-Zeng Zhou, Qun-Jie Xu, Wei-Ping Tang, Xue Jin, Xiao-Lei Yuan Apr 2015

Research Progress Of Mn-Based Lithium-Rich Cathode Materials For Li-Ion Batteries, Luo-Zeng Zhou, Qun-Jie Xu, Wei-Ping Tang, Xue Jin, Xiao-Lei Yuan

Journal of Electrochemistry

With rapid development of new energy industry like electric vehicles and energy storage station, these fields highly demand the next generation of high performance Li-ion battery systems with stronger energy density, higher power density, and longer cycling life. Lithium-rich Mn-based cathode materials, xLi2MnO3·(1-x)LiMO2(M=Mn, Co, Ni...), have become the hot topic and drawn attentions of scholars worldwide because of their high reversible capacity exceeding 240 mAh·g-1, excellent electrochemical properties, and low cost, which makes them most promising cathode material candidates for next Li-ion battery system. The cathode material Li[Li0.2Mn0.54Ni …

Go to article

First Prev Next Last