Materials Chemistry Commons^™

Controlled Synthesis And Utilization Of Metal And Oxide Hybrid Nanoparticles, Cameron Cowgur Crane

Graduate Theses and Dissertations

This dissertation reports the development of synthetic methods concerning rationally-designed, hybrid, and multifunctional nanomaterials. These methods are based on a wet chemical, solution phase approach that utilizes the knowledge of synthetic organic and inorganic chemistry to generate building blocks in solution for the growth of nanocrystals and hybrid nanostructures. This work builds on the prior knowledge of shape-controlled synthesis of noble metal nanocrystals and expands into the challenging realm of the more reactive first row transition metals. Specifically, a microemulsion sol-gel method was developed to synthesize Au-SiO2 dimers as precursors for the synthesis of segmented heterostructures of noble metals that …

Design Of 3d Macroporous Inverse Opal Tio2 Binary And Ternary Composites Sensitized With Gold Nanoparticles And Cds Quantum Dots For Photocatalysis, Daniel A. Corella

Master of Science in Chemical Sciences Theses

Materials composed of titanium (IV) oxide (TiO₂) have received enormous scientific interest due to titania’s abundance, non-toxicity, and photocatalytic proficiency, however its large band gap limits its applicability under ambient conditions. Various attempts have been made to incorporate titania into composite systems to sensitize it for activity under a broader range of wavelengths. One such method includes utilizing narrow band gap semiconductors to form an electron transfer process analogous to photosynthesis referred to as a Z-scheme. Z-scheme systems can catalyze the decomposition of aqueous pollutants via generation of reactive oxygen species after input of sunlight. This work reports …

Synthesis Of Complex/Multifunctional Metal (Hydr)Oxide/Graphite Oxide/Aunps Or Agnps Adsorbents And Analysis Of Their Interactions With Chemical Warfare Agents, Dimitrios A. Giannakoudakis

Dissertations, Theses, and Capstone Projects

One of the most widely used chemical warfare agent (CWA) is mustard gas, which is a highly toxic blistering agent. In this study we investigated the interactions of mustard gas surrogates’ vapors on zinc and zirconium hydroxides and their composites with graphite oxide (GO) and/or Au or Ag nanoparticles. Even though a small quantity of reports about the detoxification of CWAs on metal oxides is reported in the literature, almost all of these studies are performed in the liquid phase. Both herein reported Zn(OH)₂ and Zr(OH)₄ showed a good adsorption performance, with the former being photoactive under visible …

Synthesis, Characterization, And Enhanced Magnetic Properties Of Iron Carbide Nanomaterials, Brent M. Williams

Theses and Dissertations

Permanent magnets are classified as hard magnetic materials with the main purpose of generating flux for applications such as electric motors, turbines, and hard drives. High coercivity, magnetic remanence, and saturation values with high stability are some of the requirements for permanent magnets. Rare-earth magnets including neodymium and samarium based magnets are known to have superior magnetic properties due to their high magnetocrystalline anisotropy. However, due to the price of rare-earth materials development of alternate permanent magnets composed of inexpensive materials is an ongoing process. Previously cobalt carbide (Co_xC) have shown promise as a potential rare-earth free magnet …

Nitric Oxide Release From Poly(Lactic-Co-Glycolic Acid) Nanoparticles And Titanium Alloy, Nina A. Reger

Electronic Theses and Dissertations

Current methods for the treatment of bacterial infection involve the use of systemic antibiotics, which are high concentrations of antibiotics delivered over a long period time. Unfortunately, the use of systemic antibiotics can cause harmful side effects to the patient and increases the possibility for antibiotic resistance. The delivery of antibiotics or alternative antimicrobial compounds, such as nitric oxide, directly to the site of infection would decrease the amount of antibiotic necessary to treat a bacterial infection.

Poly (lactic-co-glycolic acid)/polyvinyl alcohol nanoparticles and a titanium- aluminum-vanadium metal oxide alloy implant were surface functionalized to deliver nitric oxide. Polymer nanoparticles can …

Development Of Diverse Size And Shape Rna Nanoparticles And Investigation Of Their Physicochemical Properties For Optimized Drug Delivery, Daniel L. Jasinski

Theses and Dissertations--Pharmacy

RNA nanotechnology is an emerging field that holds great promise for advancing drug delivery and materials science. Recently, RNA nanoparticles have seen increased use as an in vivo delivery system. RNA was once thought to have little potential for in vivo use due to biological and thermodynamic stability issues. However, these issues have been solved by: (1) Finding of a thermodynamically stable three-way junction (3WJ) motif; (2) Chemical modifications to RNA confer enzymatic stability in vivo; and (3) the finding that RNA nanoparticles exhibit low immunogenicity in vivo.

In vivo biodistribution and pharmacokinetics are affected by the physicochemical …

Arsenic Removal With A Dithiol Ligand Supported On Magnetic Nanoparticles, John Hamilton Walrod Ii

Theses and Dissertations--Chemistry

Exposure to arsenic (As) in water, the ubiquitous toxin that poses adverse health risks to tens of millions, is the result of both anthropogenic and geochemical mobilization. Despite recent publicity and an increased public awareness, the dangers associated with arsenic exposure rank among the top priorities of public health agencies globally. Existing sequestration applications mainly include reductions and adsorption with zero-valent metals and their oxides. The performance of adsorption media is known to preferentially favor aqueous As(V) over As(III) due to the charge of the dissolved oxyanion. Magnetic nanoparticles (MNP) have been the focus of multidisciplinary research efforts for the …

Development Of Dihydrochalcone Functionalized Gold Nanoparticles For Augmented Antineoplastic Activity, Jason N. Payne

Masters Theses & Specialist Projects

Phloridzin, an antidiabetic and antineoplastic agent usually found in fruit trees, is a dihydrochalcone constituent that has a clinical/pharmaceutical significance as a sodiumglucose linked transport 2 (SGLT2) inhibitor. Phloridzin never experienced widespread clinical usage in the pharmaceutical market due to its side effects and poor bioavailability when compared to other antidiabetic therapeutics. The poor bioavailability is primarily attributed to the degradation of the glycosidic bond of the phloridzin, resulting in the formation of phloretin, the aglycone of phloridzin and glucose. While phloretin displays a reduced capacity of SGLT2 inhibition, this nutraceutical shows enhanced antineoplastic activity in comparison to phloridzin. Gold …

Development Of New Radiolabeling Methods And Insights On Ionizing Radiation Interactions With Nanoparticles, Travis Shaffer

Dissertations, Theses, and Capstone Projects

Nanoparticles are often combined with radionuclides for various applications, ranging from waste remediation to imaging and therapy in the medical field. The overarching aim of this body of work is two-fold. The first aim is development of new radiolabeling methods for various nanoparticles that allow stable attachment of a variety of imaging and therapeutic radionuclides. The second portion more fully describes mechanisms of interaction between ionizing radiation and nanoparticles.

The following advancements will be presented in this dissertation: i) a new radiolabeling method for silica and silica-based nanoparticles that does not require the use of specific chelators, with both radiochemical …

Assembly Of Nucleic Acid-Based Nanoparticles By Gas-Liquid Segmented Flow Microfluidics, Matthew L. Capek, Ross Verheul, David H. Thompson

The Summer Undergraduate Research Fellowship (SURF) Symposium

The development of novel and efficient mixing methods is important for optimizing the efficiency of many biological and chemical processes. Tuning the physical and performance properties of nucleic acid-based nanoparticles is one such example known to be strongly affected by mixing efficiency. The characteristics of DNA nanoparticles (such as size, polydispersity, ζ-potential, and gel shift) are important to ensure their therapeutic potency, and new methods to optimize these characteristics are of significant importance to achieve the highest efficacy. In the present study, a simple segmented flow microfluidics system has been developed to augment mixing of pDNA/bPEI nanoparticles. This DNA and …

Recent Progresses In Molybdenum-Based Electrocatalysts For The Hydrogen Evolution Reaction, Ze-Xing Wu, Jie Wang, Jun-Po Guo, Jing Zhu, De-Li Wang

Journal of Electrochemistry

Electrochemical catalytic production of hydrogen has been considered as a promising and sustainable strategy for clean and renewable energy technologies. Molybdenum-based non noble metal catalysts for the hydrogen evolution reaction have attracted extensive attention due to its effective catalytic performance. In this review, the recent progresses in molybdenum-carbide, phosphide, nitride and sulfide electrocatalysts are presented. In addition, the strategies to improve the catalytic performance are analyzed and the prospects for the future development trends are expected.

The Quantum Efficiency Of Cdse Semiconducting Nanocrystals, Charles Bledsoe

Undergraduate Theses

CdSe molecules are semiconducting nanocrystals that absorb visible light and emit broad wavelengths of light in response. They utilize electromagnetic radiation not only for emitting broad wavelengths of visible light, but for fluorescence, conducting electricity, and vibrational relaxation. The Thermal Lensing technique (TL) can be used to study the lifetimes of the excited state transitions and the various nonradiative processes molecules can undergo in order to better understand the excited state dynamics of semiconducting nanocrystals, and in turn, better understand how these molecules may be applied in solar cells, lasers, and fluorescence labeling. Using known methods, four samples of CdSe …

Inhalable Nanocomposites And Anticancer Agents For Cancer Therapy, Nathanael A. Stocke

Theses and Dissertations--Chemical and Materials Engineering

Cancer is designated as the leading cause of mortality worldwide and lung cancer is responsible for nearly 30% of all cancer related deaths. Over the last few decades mortality rates have only marginally increased and rates of recurrence remain high. These factors, among others, suggest the need for more innovative treatment modalities in lung cancer therapy. Targeted pulmonary delivery is well established for treating pulmonary diseases such as asthma and provides a promising platform for lung cancer therapy. Increasing local deposition of anticancer agents (ACAs) and reducing systemic exposure of these toxic moieties could lead to better therapeutic outcomes and …

The Impact Of Surface Ligands And Synthesis Method On The Toxicity Of Glutathione-Coated Gold Nanoparticles, Bryan Harper, Federico Sinche, Meenambika Gowrishankar, Grant Marquart, Marilyn R. Mackiewicz, Stacey L. Harper

Chemistry Faculty Publications and Presentations

Gold nanoparticles (AuNPs) are increasingly used in biomedical applications, hence understanding the processes that affect their biocompatibility and stability are of significant interest. In this study, we assessed the stability of peptide-capped AuNPs and used the embryonic zebrafish (Danio rerio) as a vertebrate system to investigate the impact of synthesis method and purity on their biocompatibility. Using glutathione (GSH) as a stabilizer, Au-GSH nanoparticles with identical core sizes were terminally modified with Tryptophan (Trp), Histidine (His) or Methionine (Met) amino acids and purified by either dialysis or ultracentrifugation. Au-GSH-(Trp)2 purified by dialysis elicited significant morbidity and mortality at …

A Facile Route To Tailoring Peptide-Stabilized Gold Nanoparticles Using Glutathione As A Synthon, Rosina Ho Wu, Tan P. Nguyen, Grant W. Marquart, Thomas J. Miesen, Theresa Mau, Marilyn R. Mackiewicz

Chemistry Faculty Publications and Presentations

The preparation of gold nanoparticles (AuNPs) of high purity and stability remains a major challenge for biological applications. This paper reports a simple synthetic strategy to prepare water-soluble peptide-stabilized AuNPs. Reduced glutathione, a natural tripeptide, was used as a synthon for the growth of two peptide chains directly on the AuNP surface. Both nonpolar (tryptophan and methionine) and polar basic (histidine and dansylated arginine) amino acids were conjugated to the GSH-capped AuNPs. Ultracentrifugation concentrators with polyethersulfone (PES) membranes were used to purify precursor materials in each stage of the multi-step synthesis to minimize side reactions. Thin layer chromatography, transmission electron …

Pulse Electrodeposition Of Pd-Ni Alloy Nanoparticles For Electrocatalytic Oxidation Of Formic Acid, Fang-Zu Yang, Jun-Pei Yue, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

The Pd-Ni alloy nanoparticles with nickel atomic contents of 12.0%, 16.4% and 22.6% were successfully electrodeposited from a Pd-Ni alloy electrolyte by square wave pulse plating. The alloy nanoparticles were in the spherical shape with a diameter of 50 ~ 80 nm. As the growth potential of the alloy was negatively shifted, the nickel content of the alloy was increased, and the size of the nanoparticles was almost the same, whereas the number, the degree of crosslinking and the real active area of the nanoparticles were increased. As the nickel content of the alloy nanoparticles increased, the peak current for …

Controllable Synthesis Of Dispersed Spherical Fe3O4 Nanoparticles As Lithium-Inserted Materials, Hong-Li Zou, Wei-Shan Li

Journal of Electrochemistry

Dispersed spherical Fe₃O₄ nanoparticles were synthesized by a hydrothermal method. The influences of odecyl trimethyl ammonium bromide (DTAB) concentration on the morphology and particle size of the as-prepared Fe₃O₄ were studied. Electrochemical performance of the as-prepared sample as anode materials of lithium ion battery was investigated. It is found that the as-prepared sample exhibits superior rate performance and cycle performance. The nano-sized materials provide structural stability and favor the transfer of lithium ions.

Dielectric Properties Of Polymer–Particle Nanocomposites Influenced By Electronic Nature Of Filler Surfaces, Sasidhar Siddabattuni, Thomas P. Schuman, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

The interface between the polymer and the particle has a critical role in altering the properties of a composite dielectric. Polymer-ceramic nanocomposites are promising dielectric materials for many electronic and power devices, combining the high dielectric constant of ceramic particles with the high dielectric breakdown strength of a polymer. Self-assembled monolayers of electron rich or electron poor organophosphate coupling groups were applied to affect the filler–polymer interface and investigate the role of this interface on composite behavior. The interface has potential to influence dielectric properties, in particular the leakage and breakdown resistance. The composite films synthesized from the modified filler …

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

Studies On The Preparation, Immobilization, And Luminescence Properties Of Zinc Oxide (Zno)Quantum Dots, Yasemin Hakat

Electronic Theses and Dissertations

Quantum dots are a part of very important our technological future because of their intriguing and useful properties. These properties are different in character from those of the corresponding bulk material. Quantum dots are inorganic artificial semiconductor nanocrystal whose electrons influence their physical and chemical properties. Zinc oxide quantum dots were synthesized through an ethanol based precipitation via colloidal synthesis method at various pH values. Various emission colors were obtained because the excited quantum dots of various sizes emitted specific wavelengths of light. The emission spectra indicated that the pH dependent quantum dots were successfully synthesized. Zinc oxide quantum dots …

Development Of Tailor-Designed Gold-Platinum Nanoparticles Binary Catalysts For Efficient Formic Acid Electrooxidation, Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

The modification of a glassy carbon (GC) electrode with platinum (PtNPs) and gold (AuNPs) nanoparticles is targeted to fabricate efficient anodes for the electrooxidation of formic acid (FA). A proper adjustment of the deposition sequence of PtNPs and AuNPs could eventually enhance the electrocatalytic activity of the electrode in such a way that suppresses the CO poisoning effect during FA oxidation. The highest catalytic activity is obtained at the Au/Pt/GC electrode (with PtNPs firstly deposited on the GC electrode followed by AuNPs). This superb enhancement is quantified by comparing the relative ratio of the direct vs. the indirect oxidation peaks …

The Preparation Of Functional Surfaces, Philip Thomas Dirlam

Master's Theses

Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates in reversible manner. Glass slides and capillaries were functionalized with hydrophobic dieneophiles resulting in a  non-wetting surface.  A retro Diels-Alder reaction facilitated by the thermal treatment of the surface’s function to cleave the hydrophobic dieneophile and resulted in the fabrication of a hydrophilic surface. Contact angle (CA) measurements were used as preliminary measurements for monitoring the changes in surface energy exhibited during the initial hydrophobic state (CA - 70±3°), after attachment of the dieneophile creating  a hydrophobic state (CA - 101±9°) followed by reestablishment of the hydrophilic state …

Micro- And Nanoparticles In Uv-Cured Thin Films, T. Christopher Corkery, Joseph Chan, Mike J. Idacavage, Elizabeth R. Gillies, Paul J. Ragogna

Chemistry Presentations

No abstract provided.

Phenomena Characterization Of Energy Materials By X-Ray Absorption Spectroscopy, Ming-Yao Cheng, Chun-Jen Pan, Ju-Hsiang Cheng, Bing-Joe Hwang

Journal of Electrochemistry

The aim of this review is to introduce the characterization of energy materials by X-ray absorption spectroscopy (XAS) . This technique allows us to probe changes in the valance state and the local environment of the targeted element in the active material; thereby,leading to a better understanding of its electrochemical behavior,and hopefully showing the way to improved performance. Here,electrocatalysts for fuel cells and active electrode materials for Li-ion batteries are taken as the examples that illustrate the capability of XAS and allow observation and theory to be correlated with electrochemical phenomena.

Corrosion Protection Of Aa 2024-T3 Aluminium Alloys Using 3, 4-Diaminobenzoic Acid Chelated Zirconium-Silane Hybrid Sol-Gels, P.C. Rajath Varma, John Colreavy, John Cassidy, Mohamed Oubaha, Colette Mcdonagh, Brendan Duffy

Articles

Organic-inorganic polymers formed by hydrolysis/condensation reactions of alkoxide precursors, such as organically modified silanes (Ormosils) have found applications as electronic, optical and protective coatings. Such coatings possess important characteristics such as chemical stability, physical strength and scratch resistance. Further performance improvement is achieved through the incorporation of zirconium and titanium based nanoparticles, also formed through the sol-gel process. However due to the inherent difference in the reactivity of the precursors, the hydrolysis of each precursor must be carried out separately before being combined for final condensation. Zirconium precursors are commonly chelated using acetic acid or acetyl acetonate prior to hydrolysis, …

Photoelectrochemical Properties Of Tio2 Nanoparticles, Jie Qu, Ying Li, Qi-Wei Jiang, Xue-Ping Gao

Journal of Electrochemistry

The protonated titanate nanoparticles were obtained at room temperature and subsequently calcined at different temperatures(300 ℃,400 ℃,500 ℃,600 ℃ and 700 ℃) in air.The obtained products were characterized by XRD,TEM and UV-Vis.It is found that the grain sizes of TiO₂ nanoparticles calcined at 300 ℃ were about 20 nm,and increased gradually with the temperature rise.Photoelectric performance was measured with I～V curve and electrochemical impedance spectroscopy(EIS).The TiO₂ nanoparticles obtained at 500 ℃ showed the best photoelectrochemical properties with a photovoltaic conversion efficiency of 6.39%,which is much higher than those at other temperatures.In addition,it is also demonstrated that the charge …

Effect Of Organic Chelates On The Performance Of Hybrid Sol–Gel Coated Aa2024-T3 Aluminium Alloys, Rajath Varma, John Colreavy, John Cassidy, Mohamed Oubaha, Colette Mcdonagh, Brendan Duffy

Articles

Sol–gels are organic–inorganic polymers formed by hydrolysis/condensation reactions of alkoxide precursors, primarily silanes, which have found applications as electronic, optical and protective coatings. These coatings possess important characteristics such as chemical stability, physical strength and scratch resistance. Further performance improvement is achieved through the incorporation of zirconium and titanium based nanoparticles, also formed through the sol–gel process. However due to the inherent difference in the reactivity of the precursors, the hydrolysis of each precursor must be carried out separately before being combined for final condensation. Zirconium precursors are commonly chelated using acetic acids, prior to hydrolysis, to lower the hydrolysis …

Working Report On The Status Quo Of Nanomaterials Impact On Health And Environment, Harald Krug, Margarita Apostolova, Marite Arija Bake, Gordon Chambers, Horia Chiriac, Eva Herzog, Victoria Hand, Jürgen Höck, Peter Hoet, Nicoleta Lupu, Declan Mccormack, Maja Remskar, George Robillard, Jamila Smisterova, Jan Stetkiewicz, Speranta Tanasescu, Aris Tsatsakis, David Vaughn, Peter Wick, Jörg Wörle-Knirsch

Articles

Nanotechnology is regarded as one of the key technologies of the future and associated with high expectations by politics, science and economy. Artificially produced nanosized particles and nanoscale system components have new properties which are of importance for the development of new products and applications. Such new properties of materials and substances result from the special properties of surfaces and interfaces and in part, from the geometric shape of the material. In theory nanoparticles (NPs) can be produced from nearly any chemical; however, most NPs that are currently in use today have been made from transition metals, silicon, carbon (single-walled …

Electrodeposition Of Nano-Sb-Zn Alloy In Acetamide-Urea-Nabr-Kbr Melt, Peng Liu, Xin-Ai Guo, Ye-Xiang Tong, Qi-Qin Yang

Journal of Electrochemistry

The electroreduction of Zn(II) and Sb(III) in acetamide-urea-NaBr-KBr(343 K) were studied by cyclic volatmmetry.The reduction of Zn(II) or Sb(III) to the metals is an irreversible process.The transfer coefficient of Zn(II)+2e→Zn and Sb(III) +3e→Sb were calculated to be 0.231 and 0.319,the diffusion coefficient of Zn(II) and Sb(III) in the melt were determined as 1.70*10^-6 and 3.21*10^-6 cm²· s^-1 respectively.The Zn-Sb films with different Zn content from 29.67 at% to 97.34 at% were electrodeposited in acetamide-urea-NaBr-KBr melt at 343 K by controlling the deposition potential and the Zn(II)/Sb(III) molar ratio.The morphology of Zn-Sb film was observed by …

Application Of Microgels For Optical Tagging, J. Michael Carthcart, L. Andrew Lyon, Marcus Weck, Robert D. Bock

Biology, Chemistry, and Environmental Sciences Faculty Books and Book Chapters

In this paper we present results from our research into the use of microgel-based photonic crystals in an optical tagging application. The basis for this research is the phenomena of self-assembly of hydrogel nano- and microparticles (i.e., microgels) into colloidal crystal Bragg reflectors. Previous research has demonstrated the assembly of Bragg structures that are sensitive in the visible spectral region. This current research focuses on the extension of this process into the infrared regime and the use of these infrared-sensitive structures in the creation of an optical tag. In particular, the research effort emphasizes two primary areas: the development of …