Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electrochemistry

Discipline
Institution
Publication Year
Publication
Publication Type

Articles 61 - 71 of 71

Full-Text Articles in Materials Chemistry

Application Of Carbon Paste Electrode On The Electrogenerative-Leaching Process Of Sulfide Minerals, Shao-Fen Wang, Zheng Fang, Yun-Yan Wang Feb 2005

Application Of Carbon Paste Electrode On The Electrogenerative-Leaching Process Of Sulfide Minerals, Shao-Fen Wang, Zheng Fang, Yun-Yan Wang

Journal of Electrochemistry

The cyclic voltammetry curves of sulfide mineral electrodes or corresponding carbon paste electrodes in NaCl electrolytes have been obtained in this study. The experimental results indicate that acetylene black (revealed) the electro-catalytic propertyin the electrogenerative-leaching process of sulfide minerals. The output currentand potential of carbon paste electrodes were increased to some degrees while the activation energies were lower.

Go to article

Chemical Microetching Of Three-Dimensional Gear-Like Pattern On Nickel Surface, Zhu-Fang Liu, Li-Ming Jiang, Jing Tang, Li Zhang, Zhong-Qun Tian, Zhao-Wu Tian, Pin-Kuan Liu, Li-Ning Sun Aug 2004

Chemical Microetching Of Three-Dimensional Gear-Like Pattern On Nickel Surface, Zhu-Fang Liu, Li-Ming Jiang, Jing Tang, Li Zhang, Zhong-Qun Tian, Zhao-Wu Tian, Pin-Kuan Liu, Li-Ning Sun

Journal of Electrochemistry

The chemical micromachining on nickel surface with three-dimensional (3D) gear-like mold was realized by confined etchant layer technique (CELT). By using effective chemical etching and scavenging system (HNO3 +NaOH) and optimizing experimental parameters, such as the etching time, etching current density, concentration of the etchant or and scavenger, we obtained the etched pattern, which is close to negative copy of the mold. The etched micro-pattern characterized by SEM and AFM, demonstrates that CELT can be applied to the 3-D microstructure replication on nickel surface.

Go to article

Studies On The Electrochemical Behavior Of Copper Paratolysulfate And Its Complexes, Ji-Guo Song, Pei-Kang Shen Aug 2004

Studies On The Electrochemical Behavior Of Copper Paratolysulfate And Its Complexes, Ji-Guo Song, Pei-Kang Shen

Journal of Electrochemistry

Copper (II) paratolysulfate has been synthesized and characterized by thermo-gravimetric (TG) measurements and differential scanning calorimetric (DSC) analysis. This salt can easily lose all crystal water and the dehydrated salt does not deliquesce in the air. It is found for the first time that the complex of Cu(p-OTs)2/ethanolamine(1∶1) can catalyze the oxidation of 1,1′-bi-2-naphthol in DMSO and DMF, while the process is difficult to perform in H2O and CH3OH. The electrochemical behaviors of both Cu(p-OTs)2 and its complexes with ethanolamine have been studied on platinum electrode in DMSO, DMF, CH3OH and …

Go to article

Synthesis Of (S)-3-Phenylpropane-2-Tert-Butoxycarbonylamino-1-Thiol And Its Electrochemical Behavior Self-Assembled On Gold, Ru Sun, Jian-Feng Ge, Mei Wang, Ren-Ao Gu Aug 2004

Synthesis Of (S)-3-Phenylpropane-2-Tert-Butoxycarbonylamino-1-Thiol And Its Electrochemical Behavior Self-Assembled On Gold, Ru Sun, Jian-Feng Ge, Mei Wang, Ren-Ao Gu

Journal of Electrochemistry

The synthesis of (S)-3-Phenylpropane-2-tert-butoxycarbonylamino-1-thiol(N-Boc-APT) from L-phenylalanine was reported. L-Phenylalanine was reduced to the corresponding amino alcohol, protection of the amino group using tert-butyl pyrocarbonate gave (S)-2-tert-butoxycarbonylamino-3-phenylpropane-1-ol, which was then O-mesylated and treated with potassium thioacetate in DMF to give 3-phenylpropane-2-tert- butoxycarbonylamino-1-etylmercapto. After the acetyl group was removed with ammonia in alcohol, the desired target molecular was obtained. The structure of intermediate and target molecular was conformed by IR and 1HNMR. We made N-Boc-APT self-assemble-modificated gold electrode and investigated its electrochemical behavior. The CV results of methylene blue on nano-Au/N-Boc-APT SAM/Au electrode showed that nano-Au could speed this electron transfer …

Go to article

The Activity Of Silicon Carbide Particles In Al-Based Metal Matrix Composites Revealed By Scanning Electrochemical Microscopy, David O. Wipf, L. Díaz-Ballote, L. Veleva, M. A. Pech-Canul, M. I. Pech-Canul Jan 2004

The Activity Of Silicon Carbide Particles In Al-Based Metal Matrix Composites Revealed By Scanning Electrochemical Microscopy, David O. Wipf, L. Díaz-Ballote, L. Veleva, M. A. Pech-Canul, M. I. Pech-Canul

CAS Publications

Scanning electrochemical microscopy (SECM) is used to image variations in electrochemical activity over the surface of an aluminum-based metal matrix composite (MMC) in contact with buffered or unbuffered neutral solutions. The composite consists of an Al - 13.5% Si - 9% Mg alloy matrix and reinforcing silicon carbide particles (SiCp). Feedback mode SECM imaging using ferrocenemethanol as a redox mediator in 0.1 M NaCl solution and in buffer solution (pH 6.8) revealed that the SiC particles are electrochemically active. The data suggest that the electronic conductivity at these sites is higher than that of the Al2O …

Go to article

A Bilayer Self-Assembled Membrane Electrode For Fluorescence And Its Electrochemical Characterization, Xiang-Ying Sun, Bin Liu, Yun-Bao Jiang May 2003

A Bilayer Self-Assembled Membrane Electrode For Fluorescence And Its Electrochemical Characterization, Xiang-Ying Sun, Bin Liu, Yun-Bao Jiang

Journal of Electrochemistry

The bilayer membrane was assemblied on Au electrode by the electrostatic interaction between the fluorescence regent 1-naphthylamine diacetate acid (NADA) and DL-Cysteine. The SAMs electrode NADA/Cys/Au can be used as fluorescence and electrochemical sensor for metal ions. This paper states the electrochemical characterization of NADA/Cys/Au and SAMs' application in continous determination for Cu2+ and Ni2+.

Go to article

The Electrochemical Behaviors Of A Novel Ferrocene Alkylthiol Sams On Au Electrode, Xiao-Gang Zhang, Yan-Li Shi, Hu-Lin Li May 2003

The Electrochemical Behaviors Of A Novel Ferrocene Alkylthiol Sams On Au Electrode, Xiao-Gang Zhang, Yan-Li Shi, Hu-Lin Li

Journal of Electrochemistry

A novel alkylthiol molecule containing ferrocene and pyridium moieties and its hydrogenated products were synthesized and subsequently assembled on Au electrode as SAMs. Cyclic voltammogram(CV) was used to investigate the structure-dependent electrochemical response of the SAMs in 0.1 mol/L HClO4 aqueous solution.

Go to article

A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber Aug 2000

A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber

Journal of Electrochemistry

The bistable characteristics of the process of active passive transition of iron in sulfuric acid was described and the stochastic resonance phenomenon in the process was simulated.

Go to article

Electrochemical Evaluation On The Porosity Of Electroless Ni-P Alloy Coatings, Hong-Ying Yu, Dong-Bai Sun, Jing-Bing Huang, De-Jun Yang Aug 2000

Electrochemical Evaluation On The Porosity Of Electroless Ni-P Alloy Coatings, Hong-Ying Yu, Dong-Bai Sun, Jing-Bing Huang, De-Jun Yang

Journal of Electrochemistry

By investigating the polarization curves of pure Ni-P alloy, Ni-P alloy coation and carbon steel in nitric acids with different concentrations, the sutable concentration of nitric acid for the evaluation of the porosity of Ni-P alloy coatings has been determined and the coatings with different thickness have been evaluated. The results indicated that the nitric acid with 10 wt% concentration is the most suitable solution for the porosity of the coating by using electrochemical method. The polarization curve of Ni-P alloy coating in 10% nitric acid can accurately reveal the porosity. With the decrease of the porosity of the coating, …

Go to article

Effect Of Inhibitor On Electrochemical Behavior Of 1cr18 Stainless Steel In Acidic Solution Under Friction, Jin-Ping Xiong May 1999

Effect Of Inhibitor On Electrochemical Behavior Of 1cr18 Stainless Steel In Acidic Solution Under Friction, Jin-Ping Xiong

Journal of Electrochemistry

The electrochemical behavior of 1Cr18 stainless steel had been studied using a reciprocating triboelectrochemical equipment under friction in 0.2 mol/L H2SO4 solution with and without addition of thiourea, the frictionized surface of 1Cr18 stainless steel had been examined by the SEM, XPS and IR. The results showed that the loss rate of 1Cr18 stainless steel in the solution could be reduced by addition of thiourea. The adsorption of thiourea on the surface of 1Cr18 stainless steel prohibited the oxidization of Cr3+ to form Cr(Ⅵ) and formation of passive film consisting of CrO42- or/and Cr(Ⅵ), …

Go to article

Self-Assembled Monolayers: Preparation,Properties And Application, Xiandui Dong, Juntao Lu, Chuansin Cha Aug 1995

Self-Assembled Monolayers: Preparation,Properties And Application, Xiandui Dong, Juntao Lu, Chuansin Cha

Journal of Electrochemistry

Self-assembling technique is a versatile approach to the preparation of monolayersof well-defined composition, structure, thickness and physicochemical properties. Different aspects, such as wettability, adhesion, corrosion, tribology, electrontransfer, protein adsorption, molecular recognition, and applications of SAMs are widely studied. The developments in the last decade arereviewed, with special attention to the electrochemical studies related to electrodes modified with thiol-derivative-based SAMs.

Go to article

First Prev