Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Physical Chemistry (23)
- Engineering (22)
- Materials Science and Engineering (22)
- Electrical and Computer Engineering (21)
- Engineering Science and Materials (21)
-
- Power and Energy (20)
- Nanoscience and Nanotechnology (8)
- Catalysis and Reaction Engineering (7)
- Chemical Engineering (7)
- Ceramic Materials (1)
- Environmental Sciences (1)
- Nanotechnology Fabrication (1)
- Other Chemistry (1)
- Other Materials Science and Engineering (1)
- Polymer Chemistry (1)
- Polymer and Organic Materials (1)
- Sustainability (1)
- Publication Year
- Publication Type
Articles 1 - 24 of 24
Full-Text Articles in Materials Chemistry
Sno2 Particles Embedded Into Carbon Coated Mesoporous SioX Rod As High Volumetric Capacity Anode For Lithium-Ion Batteries, Jia-Lin Guo, Ni-Ni Li, Peng Zheng
Sno2 Particles Embedded Into Carbon Coated Mesoporous SioX Rod As High Volumetric Capacity Anode For Lithium-Ion Batteries, Jia-Lin Guo, Ni-Ni Li, Peng Zheng
Journal of Electrochemistry
Due to the high capacity and moderate volume expansion of silicon protoxide SiOx (160%) compared with that of Si (300%), reducing silicon dioxide SiO2 into SiOx while maintaining its special nano-morphology makes it attractive as an anode of Li-ion batteries. Herein, through a one-pot facile high-temperature annealing route, using SBA15 as the silicon source, and embedding tin dioxide SnO2 particles into carbon coated SiOx, the mesoporous SiOx-SnO2@C rod composite was prepared and tested as the anode material. The results revealed that the SnO2 particles were distributed uniformly in the …
Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang
Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang
Journal of Electrochemistry
Carbon layers with different thicknesses were introduced into the surfaces of silicon (Si) nanoparticles by sol-gel method using poly (cyclotriphosphazene-co-4, 4'-sulfonyldiphenol) as the carbon source. Technologies of X-ray diffraction, thermo-gravimetric analysis, Brunauer-Emmett-Teller and transmission electron microscopy were employed to analyze the structures and components of the as-prepared Si@CPZS composites. Electrochemical performance of Si@CPZS with different carbon thicknesses was studied. The results showed that Si@CPZS with carbon thickness of 10 nm possessed the best performance. Its capacity remained 940 mAh·g-1 after 290 cycles under 500 mA·g-1. As the addictive, the graphite-based anode contained 30% of …
Research Progresses In Improvement For Low Temperature Performance Of Lithium-Ion Batteries, Yue-Ru Gu, Wei-Min Zhao, Chang-Hu Su, Chuan-Jun Luo, Zhong-Ru Zhang, Xu-Jin Xue, Yong Yang
Research Progresses In Improvement For Low Temperature Performance Of Lithium-Ion Batteries, Yue-Ru Gu, Wei-Min Zhao, Chang-Hu Su, Chuan-Jun Luo, Zhong-Ru Zhang, Xu-Jin Xue, Yong Yang
Journal of Electrochemistry
Lithium-ion batteries (LIBs) have become a new research hotspot due to their high energy density and long service life. However, the temperature characteristics, especially the poor performance at low temperatures, have seriously limited their wider applications. In this report, the research progresses in the low temperature performance of LIBs are reviewed. The main existing limitations of LIBs at low temperatures were systematically analyzed, and followed by discussion on the recent improvements in low temperature performances by developing novel cathode, electrolyte, and anode materials. The developments for improving the low temperature performance of LIBs are prospected. The three most important factors …
Co3(Hcoo)6@Rgo As A Promising Anode For Lithium Ion Batteries, Heng Jiang, Jing-Min Fan, Ming-Sen Zheng, Quan-Feng Dong
Co3(Hcoo)6@Rgo As A Promising Anode For Lithium Ion Batteries, Heng Jiang, Jing-Min Fan, Ming-Sen Zheng, Quan-Feng Dong
Journal of Electrochemistry
Metal–organic framework(MOF) is a kind of novel electrode materials for lithium ion batteries. Here, a composite material Co3(HCOO)6@rGO was synthesized for the first time by in situ loading of Co3(HCOO)6 on rGO (reduced oxide graphene) through a solution chemistry method. As an anode material for lithium ion batteries, it exhibited an excellent cycle stability as well as a large reversible capacity of 926 mAh·g-1 at a current density of 500 mA·g-1 after 100 cycles within the voltage range of 0.02 ~ 3.0 V vs. Li/Li+ with a good rate capability. …
Surfactant Driven Assembly Of Freeze-Casted, Polymer-Derived Ceramic Nanoparticles On Grapehene Oxide Sheets For Lithium-Ion Battery Anodes, Ali Zein Khater
Surfactant Driven Assembly Of Freeze-Casted, Polymer-Derived Ceramic Nanoparticles On Grapehene Oxide Sheets For Lithium-Ion Battery Anodes, Ali Zein Khater
Honors Undergraduate Theses
Traditional Lithium-Ion Batteries (LIBs) are a reliable and cost-efficient choice for energy storage. LIBs offer high energy density and low self-discharge. Recent developments in electric-based technologies push for replacing historically used Lead-Acid batteries with LIBs. However, LIBs do not yet meet the demands of modern technology. Silicon and graphene oxide (GO) have been identified as promising replacements to improve anode materials. Graphene oxide has a unique sheet-like structure that provides a mechanically stable, light weight material for LIB anodes. Due to its structure, reduced graphene oxide (rGO) is efficiently conductive and resistive to environmental changes. On the other hand, silicon-based …
Research Progress Of Si-Based Anode Materials For Lithium-Ion Batteries, Ding-Qiong Chen, Yang Yang, Qiu-Li Li, Jin-Bao Zhao
Research Progress Of Si-Based Anode Materials For Lithium-Ion Batteries, Ding-Qiong Chen, Yang Yang, Qiu-Li Li, Jin-Bao Zhao
Journal of Electrochemistry
Owing to its high theoretical specific capacity (4200 mAh·g-1), silicon is a promising candidate to replace graphite as the anode in lithium ion batteries (LIBs). However, low intrinsic electric conductivity and dramatic volume change (~ 300%) during the process of lithiation and delithiation result in electrode pulverization and capacity loss with cycling, accordingly, the application of silicon as an anode in LIBs has been severely hindered. We will discuss the structure of silicon electrode including synthesis of Si-based composites,the selection of binder for silicon and the fabrication of binder-free Si-based electrode, as well as the electrolyte additive to …
Effecting Of Dissolved Oxygen On Microbial Fuel Cells Based On Pseudomonas Aeruginosa, Chang-Li Cao, Li-Xiang Chen, Ran-Ran Wu, Ken-Lin Chang, Feng Zhao
Effecting Of Dissolved Oxygen On Microbial Fuel Cells Based On Pseudomonas Aeruginosa, Chang-Li Cao, Li-Xiang Chen, Ran-Ran Wu, Ken-Lin Chang, Feng Zhao
Journal of Electrochemistry
In this work, the reaction between the electron shuttle secreted by Pseudomonas aeruginosa and anode was studied by measuring cyclic voltammogram and open circuit potential. The effect of dissolved oxygen on the oxidation reaction of anode was explored. It was demonstrated that the reaction was a diffusion-controlled and reversible process. The anode was a little affected when the dissolved oxygen of inocula was low (0 ~ 1.6 mg·L-1). The polarization curves showed that the current output of microbial fuel cells decreased 7% with the impact of dissolved oxygen.
Electrochemical Performance Of Si-C Composites Prepared By Discharge-Plasma Assisted Milling, Yu-Long Chen, Ren-Zong Hu, Hui Liu, Wei Sun, Min Zhu
Electrochemical Performance Of Si-C Composites Prepared By Discharge-Plasma Assisted Milling, Yu-Long Chen, Ren-Zong Hu, Hui Liu, Wei Sun, Min Zhu
Journal of Electrochemistry
Silicon-carbon (Si-C) composites, with microstructure of multi-scaled Si particles being homogenously dispersed in micro-sized carbon matrix, had been prepared by dielectric barrier discharge plasma assisted two-step milling for the first time. The Si-C composite anode had a discharge capacity of 1259 mAh·g-1 at the first cycle, while the capacity retained 474 and 396 mAh·g-1 after 20 and 100 cycles, respectively. Charge-discharge curves and AC impedance response indicated that both silicon and carbon phases in the composite anode were involved during the lithiation/delithiation reactions and the electron transport resistance in the Si-C composite anode was much lower than that …
Controllable Synthesis Of Dispersed Spherical Fe3O4 Nanoparticles As Lithium-Inserted Materials, Hong-Li Zou, Wei-Shan Li
Controllable Synthesis Of Dispersed Spherical Fe3O4 Nanoparticles As Lithium-Inserted Materials, Hong-Li Zou, Wei-Shan Li
Journal of Electrochemistry
Dispersed spherical Fe3O4 nanoparticles were synthesized by a hydrothermal method. The influences of odecyl trimethyl ammonium bromide (DTAB) concentration on the morphology and particle size of the as-prepared Fe3O4 were studied. Electrochemical performance of the as-prepared sample as anode materials of lithium ion battery was investigated. It is found that the as-prepared sample exhibits superior rate performance and cycle performance. The nano-sized materials provide structural stability and favor the transfer of lithium ions.
Electrocatalytic Oxidation Degradation Kinetics Of Oxalic Acid In A Cylindrical Electrochemical Reactor With Ti/Iro2-Ta2O5 Anode, Jing Su, Hai-Bo Lin, Hong Xu, Wei-Min Huang, Ya-Peng He
Electrocatalytic Oxidation Degradation Kinetics Of Oxalic Acid In A Cylindrical Electrochemical Reactor With Ti/Iro2-Ta2O5 Anode, Jing Su, Hai-Bo Lin, Hong Xu, Wei-Min Huang, Ya-Peng He
Journal of Electrochemistry
The electrocatalytic oxidation degradation kinetics of oxalic acid in a cylindrical electrochemical reactor with Ti/IrO2-Ta2O5 as an anode was studied. The relation between instantaneous current efficiency and organic concentration in bulk was established based on the two paths for direct electrochemical oxidations, and the theoretical model was verified by experiments. The experimental resultswere reasonably consistent with the established kinetic model. Furthermore, the competition between the two paths was explored with the modelparameter analysis.
Influences Of Particle Size And Sulfuric Acid Treatment On The Electrochemical Performance Of Bamboo Charcoal, Yu Yao, Ai-Shui Yu
Influences Of Particle Size And Sulfuric Acid Treatment On The Electrochemical Performance Of Bamboo Charcoal, Yu Yao, Ai-Shui Yu
Journal of Electrochemistry
The bamboo charcoal had been milled and treated by sulfuric acid. The influences of as-prepared material particle size and sulfuric acid treatment on the electrochemical performance had been studied. The result displays that the bamboo charcoal with mean particle size about 5 μm has the best first coulombic efficiency. Sulfuric acid treatment could raise the discharge capacity of bamboo charcoal, and the first discharge capacity of 328.2 mAh·g-1 was obtained with the bamboo charcoal treated by sulfuric acid for 18 h. Furthermore, the capacity of 302.3 mAh·g-1 could be maintained for 50 cycles, showing good cycle performance.
An Overview Of Electrode Materials In Microbial Fuel Cells, Su-Qin Ci, Na Wu, Zhen-Hai Wen, Jing-Hong Li
An Overview Of Electrode Materials In Microbial Fuel Cells, Su-Qin Ci, Na Wu, Zhen-Hai Wen, Jing-Hong Li
Journal of Electrochemistry
Microbial fuel cells (MFCs) are devices that can directly convert organic chemical energy into electrical energy with microbial as catalysts. MFCs are a promising bio-electrochemical system with the potential to degrade organic sewage and produce electricity. This article supplies a critical and comprehensive review for the electrode materials concerning about anode and cathode in MFCs, including the fabrications, functional modifications and surface constructions of electrode materials, as well as their applications in MFCs. Additionally, the existing problems of electrode materials in current MFCs have been demonstrated in order to provide the guideline for exploring the next-generation electrode materials for MFCs.
Preparation And Characterization Of Mno/Tin Anode For Lithium Ion Batteries, Gao-Jie Xu, Hai-Yan Yang, Peng-Xian Han, Li-Xue Zhang, Ke-Jun Zhang, Chuan-Jian Zhang, Yu-Hua Fan, Cai-Feng Bi, Guang-Lei Cui
Preparation And Characterization Of Mno/Tin Anode For Lithium Ion Batteries, Gao-Jie Xu, Hai-Yan Yang, Peng-Xian Han, Li-Xue Zhang, Ke-Jun Zhang, Chuan-Jian Zhang, Yu-Hua Fan, Cai-Feng Bi, Guang-Lei Cui
Journal of Electrochemistry
Manganese titanate (MnTiO3) powder was prepared via a sol-gel method using manganese acetate and tetrabutyl titanate as raw materials, and citric acid as a chelating agent. Through high temperature nitridation of MnTiO3 powder in ammonia, the MnO/TiN composite was obtained. The phase structure, composition and morphology of the composites were characterized by XRD, SEM and EDS. The electrochemical properties of the composite electrodes were studied by performing cyclic voltammetry, galvanostatic charge and discharge, and electrochemical impedance spectroscopy tests. The MnO/TiN electrode delivered specific capacities of 394 mAh·g-1 and 146 mAh·g-1 at the current density of …
Preparation And Electrochemical Performance Of Three-Dimensional Porous Snco Alloy Electrode, Lian-Jie Xue, Ling Huang, Fu-Sheng Ke, Guo-Zhen Wei, Xiao-Mei Zheng, Jun-Tao Li, Xiao-Yong Fan, Shi-Gang Sun
Preparation And Electrochemical Performance Of Three-Dimensional Porous Snco Alloy Electrode, Lian-Jie Xue, Ling Huang, Fu-Sheng Ke, Guo-Zhen Wei, Xiao-Mei Zheng, Jun-Tao Li, Xiao-Yong Fan, Shi-Gang Sun
Journal of Electrochemistry
Three-dimensional porous Cu film was prepared by electroless plating,and used as a current collector for preparation of three-dimensional structured SnCo alloy electrode,which was mainly prepared by an electrodeposition method,and composed of pure Sn and CoSn2 phases. Electrochemical experimental results show that three-dimensional structured SnCo alloy electrode exhibits much better cycleability than planar SnCo alloy electrode,with first discharge capacity and charge capacity of 636. 3 and 528. 7 mAh·g-1,respectively. After 70th cycling,capacity retention is 83. 1% with 529. 5 mAh·g-1. The lithiation process during first discharge was investigated by electrochemical impedance spectroscopy.
Nano-Sn/Hard Carbon Composite As Anode Material For Lithium Ion Batteries, Bing-Kun Guo, Jie Shu, Kun Tang, Ying Bai, Zhao-Xiang Wang, Li-Quan Chen
Nano-Sn/Hard Carbon Composite As Anode Material For Lithium Ion Batteries, Bing-Kun Guo, Jie Shu, Kun Tang, Ying Bai, Zhao-Xiang Wang, Li-Quan Chen
Journal of Electrochemistry
The tin(Sn) nano particles were embedded into the mesopores of hard carbon spherules(HCS) to form a composite anode material for lithium ion batteries.The structure of the obtained composite was characterized by X-ray diffraction(XRD) while its electrochemical performances were evaluated with galvanostatic cycling.It is found that the embedding Sn nanoparticles into porous HCS not only result in a composite material with high lithium storage capacity and capacity retention,but also increase the initial coulombic efficiency of the composite.Based on the infrared spectroscopic analysis,the enhanced initial coulombic efficiency is attributed to the inductive decomposition of the ROCO2Li species in the solid …
Fabrication And Performance Of Ni-Scsz Cermet Anode Modified By Coating With Gd0.2Ce0.8O2 For A Sofc, Ren-Zhu Liu, Bo Huang, Xiao-Feng Ye, Shao-Rong Wang, Jia-Di Cao, Huai-Wen Nie, Ting-Lian Wen
Fabrication And Performance Of Ni-Scsz Cermet Anode Modified By Coating With Gd0.2Ce0.8O2 For A Sofc, Ren-Zhu Liu, Bo Huang, Xiao-Feng Ye, Shao-Rong Wang, Jia-Di Cao, Huai-Wen Nie, Ting-Lian Wen
Journal of Electrochemistry
A Ni-scandia-stabilized zirconia(Ni-ScSZ) cermet anode modified by coating with nano-sized gadolinium-doped ceria(GDC,Gd0.2Ce0.8O2) was prepared using a simple combustion process for the solid oxide fuel cell(SOFC) running on methane fuel. X-ray diffraction(XRD) and scanning electron microscopy(SEM) indicated that the surface of Ni-ScSZ was coated by nano-sized GDC particles(<100nm). Single cell testing showed that the 2.0%(by mass) GDC-coated Ni-ScSZ anode had better performance. The highest power densities of the cell with this anode were 825 and 848mW/cm2 at 850℃ in humidified hydrogen and methane, respectively, whereas the corresponding values were 584 and 586mW/cm2 for the cell with Ni-ScSZ anode.Electrochemical impedance spectra(EIS) illustrated that the cell with Ni-ScSZ anode exhibited far greater impedances than the cell with 2.0%(by mass) GDC-coated Ni-ScSZ anode.Then the …
The Research Of Nano-Sized Nio Anode Materials For Lithium Ion Batteries, Jun-Mei Yan, Jing Zhang, Yong Yang
The Research Of Nano-Sized Nio Anode Materials For Lithium Ion Batteries, Jun-Mei Yan, Jing Zhang, Yong Yang
Journal of Electrochemistry
The nano-sized NiO materials were synthesized by solid phase method and sol-gel method. The synthesis conditions were optimized by DSC and TG techniques. The sol-gel method was optimized by changing the solvent and regulating the solution's pH for preparing NiO material. The structure and morphology of the materials were also characterized by means of XRD and TEM techniques, and the electrochemical performances of the materials were studied by the galvanostatically charge and discharge experiments.
Electrochemical Monitoring On The Deactivation Of A Metallic Oxide Anode, Li-Kun Xu, Shi-Zhe Song, Ting-Yong Wang, Guang-Zhang Chen
Electrochemical Monitoring On The Deactivation Of A Metallic Oxide Anode, Li-Kun Xu, Shi-Zhe Song, Ting-Yong Wang, Guang-Zhang Chen
Journal of Electrochemistry
The process of accelerated life test of an IrO2/Ta2O5 coated titanium anode was monitored using cyclic voltammetry and electrochemical impedance spectroscopy. The vatiation with electrolysis time of anodic voltammetric charge Q*, the double layer capacitance Cdl,the oxide film resistance Rf and the charge transfer resistance Rct for oxygen evolution was measured. A deactivation mechanism was proposed based on the observation results.
A Review On Impressed Current Anodes Of Cathodic Protection For Underground Structures, Li-Kun Xu, Ting-Yong Wang, Liang-Qian You, Rong-Chun Qian, Guang-Zhang Chen
A Review On Impressed Current Anodes Of Cathodic Protection For Underground Structures, Li-Kun Xu, Ting-Yong Wang, Liang-Qian You, Rong-Chun Qian, Guang-Zhang Chen
Journal of Electrochemistry
The requirements of impressed current anodes for the protection of underground structures were presented in this paper according to the analysis of working conditions. The characteristics and performance of various anodes such as scrap steel, graphite, high silicon cast iron, magnetite, platinized anode, conductive polymer cable anode and mixed metal oxide anode were reviewed. The development trend of impressed current anodes for underground applications was also discussed.
The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen
The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen
Journal of Electrochemistry
Our recent works about nanosized materials for lithium ion batteries are reported, including the synthesis of nanosized Sb, SnSb, CuSnx, Si and CuS, their electrochemical performance as anode or cathode active materials, the variation of crystal structure and morphology during discharge and charge cycling. In addition, the self-plasticization of lithium salt with nanosized anion ion in polymer electrolyte, the influence of the electrochemical Li-doping on the Raman spectra and photoluminescence of nano-Si are also introduced. Furthermore, the relationship between intrinsic properties of nanosized materials and their electrochemical behaviors are discussed. The prospect of nanosized materials for lithium ion …
Study On The Ti/Sno2/Pbo2 Anode In Sulphuric Acid Solution, Yao-Gang Li, Yan-Pin Shun, Wen-Lin Xu
Study On The Ti/Sno2/Pbo2 Anode In Sulphuric Acid Solution, Yao-Gang Li, Yan-Pin Shun, Wen-Lin Xu
Journal of Electrochemistry
The Ti/SnO2/PbO2 electrode, prepared by the electrodeposition method, was tested as the anode for the oxygen evolution reaction in 1 mol/L H2SO4 solution and examined by means of EDS, SEM and XRD. The electrocatalytic activity and the electrochemical stability of the prepared electrode were found to be superior.
Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅲ. Improvement Of Artificially Imposed Solid Electrolyte Film On Cell Performance, Shuhua Ma, Xiabin Jing, Fosong Wang
Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅲ. Improvement Of Artificially Imposed Solid Electrolyte Film On Cell Performance, Shuhua Ma, Xiabin Jing, Fosong Wang
Journal of Electrochemistry
The improving effect of solid electrolyte film artificially imposed on carbon electrode was investigated. The result showed that both the charge/discharge capacity and first charge/discharge efficiency, to a certain extent, were enhanced, and the result also suggested the effectiveness of the substitution of the artificially imposed solid electrolyte film for the inherent passivating film which was formed on the surface of the carbon electrode while inserted in the electrolyte during charging or discharging. The Scanning Electron Microscope result displayed the compact and well-defined morphology of the artificially imposed crystalline film.
Surface Modification Of Molten Carbonate Fuel Cell Anode, Baizeng Fang, Xinyu Liu, Xindong Wang, Shuzhen Duan
Surface Modification Of Molten Carbonate Fuel Cell Anode, Baizeng Fang, Xinyu Liu, Xindong Wang, Shuzhen Duan
Journal of Electrochemistry
In this study, the anode material of molten carbonate fuel cell was modified by the deposition of niobium on nickel surface. The results of polarization experiments reveal that the corrosion resistant properties as well as electrocatalytic activity have been improved greatly.
Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅱ. The Carbon Material With Core Shell Structure And Its Positive Effect On Cell Performance Of Graphite Anode, Shuhua Ma, Hanju Guo, Ji Li, Hongze Liang, Xiabin Jing, Fosong Wang
Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅱ. The Carbon Material With Core Shell Structure And Its Positive Effect On Cell Performance Of Graphite Anode, Shuhua Ma, Hanju Guo, Ji Li, Hongze Liang, Xiabin Jing, Fosong Wang
Journal of Electrochemistry
The carbon powders and film electrode with core shell structure were prepared by carbonization in gas state with using refined coal as shell material and Artificial Graphite and Mesocarbon Microbeads (2 800 ℃) graphite as core material. Galvanostatic charge/discharge measurement showed that both steady charge/discharge capacity and first charge/discharge efficiency were improved. Cyclic voltammetry indicated that the peak at about 0.7 V vs. Li+/Li characteristic of decomposition of electrolyte got weakened, and a more compact film was formed. X-ray diffraction measurement suggested the existence of amorphous carbon shell on the carbon powders and carbon film.