Materials Chemistry Commons^™

Studies Of Exotic Electronic, Optical, And Electrochemical Properties In Nanoparticle Assembly And Graphene, Jay Min Lim

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

It is well known that exotic properties and phenomena emerge as structural dimensions shrink to nanoscales. We self-assembled one-dimensional chains of gold nanoparticles in solution and quantified the growth process by monitoring the redshift of localized surface plasmon resonance (LSPR). Curiously, the redshift stopped while the chains continued to rearrange as manifested by gradual reduction in the LSPR peak. Using electromagnetic simulations, we quantitatively explained the phenomena as a rapid “addition-polymerization” followed by a sharp transition to “condensation-process.” Next, recognizing the significant electric field enhancement in the interparticle gap, a photoluminescent-active Eu³⁺ ion was used to probe Surface-Enhanced Photoluminescence …

Functional Electrolytes Designing And Studying For Lithium Metal And Non-Aqueous Zinc Metal Batteries, Liping Zhang

All Graduate Theses and Dissertations, Fall 2023 to Present

Our current energy policy relies heavily on burning fossil fuels, raising serious concerns due to CO₂-related global warming. Consequently, significant progress is being made in pursuing renewable and green energy sources, such as solar, wind, and geothermal energy. These renewable energies require rechargeable batteries as energy storage systems to compensate for their intermittent nature.

Over the decades, lithium-ion batteries (LIBs) have become the dominant power sources for portable electronic devices. Current LIBs rely on graphite anodes with a limited theoretical capacity (372 mAh g^-1), which restricts their advanced applications. Li metal (Li⁰) anodes, with …

Series Reports From Professor Wei’S Group Of Chongqing University: Advancements In Electrochemical Energy Conversions (1/4): Report 1: High-Performance Oxygen Reduction Catalysts For Fuel Cells, Fa-Dong Chen, Zhuo-Yang Xie, Meng-Ting Li, Si-Guo Chen, Wei Ding, Li Li, Jing Li, Zi-Dong Wei

Journal of Electrochemistry

Two major challenges, high cost and short lifespan, have been hindering the commercialization process of low-temperature fuel cells. Professor Wei’s group has been focusing on decreasing cathode Pt loadings without losses of activity and durability, and their research advances in this area over the past three decades are briefly reviewed herein. Regarding the Pt-based catalysts and the low Pt usage, they have firstly tried to clarify the degradation mechanism of Pt/C catalysts, and then demonstrated that the activity and stability could be improved by three strategies: regulating the nanostructures of the active sites, enhancing the effects of support materials, and …

Data-Driven Viewpoint For Developing Next-Generation Mg-Ion Solid-State Electrolytes, Fang-Ling Yang, Ryuhei Sato, Eric Jian-Feng Cheng, Kazuaki Kisu, Qian Wang, Xue Jia, Shin-Ichi Orimo, Hao Li

Journal of Electrochemistry

Magnesium (Mg) is a promising alternative to lithium (Li) in solid-state batteries due to its abundance and high theoretical volumetric capacity. However, the sluggish Mg-ion conduction in the lattice of solid-state electrolytes (SSEs) is one of the key challenges that hamper the development of Mg-ion solid-state batteries. Though various Mg-ion SSEs have been reported in recent years, key insights are hard to be derived from a single literature report. Besides, the structure-performance relationships of Mg-ion SSEs need to be further unraveled to provide a more precise design guideline for SSEs. In this Viewpoints article, we analyze the structural characteristics of …

Professor Yong Yang, The Editorial Board Member Of Journal Of Electrochemistry, Is Elected As A Fellow Of The Electrochemical Society, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Kai Wu, The Editorial Board Member Of Journal Of Electrochemistry And Chief Scientist Of Catl, Receives The National Science And Technology Progress Award, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Sorbitol-Electrolyte-Additive Based Reversible Zinc Electrochemistry, Qiong Sun, Hai-Hui Du, Tian-Jiang Sun, Dian-Tao Li, Min Cheng, Jing Liang, Hai-Xia Li, Zhan-Liang Tao

Journal of Electrochemistry

The unstable zinc (Zn)/electrolyte interfaces formed by undesired dendrites and parasitic side reactions greatly hinder the development of aqueous zinc ion batteries. Herein, the hydroxy-rich sorbitol was used as an additive to reshape the solvation structure and modulate the interface chemistry. The strong interactions among sorbitol and both water molecules and Zn electrode can reduce the free water activity, optimize the solvation shell of water and Zn²⁺ ions, and regulate the formation of local water (H₂O)-poor environment on the surface of Zn electrode, which effectively inhibit the decomposition of water molecules, and thus, achieve the thermodynamically stable …

First Announcement Of 76th Annual Meeting Of The International Society Of Electrochemistry, International Society Of Electrochemistry (Ise)

Journal of Electrochemistry

No abstract provided.

Policy Overview (June, 2024)

Bulletin of Chinese Academy of Sciences (Chinese Version)

No abstract provided.

News Flash

Bulletin of Chinese Academy of Sciences (Chinese Version)

No abstract provided.

Iron Oxide Nanozymes Enhanced By Ascorbic Acid For Macrophage-Based Cancer Therapy, Zhongchao Yi, Xiaoyue Yang, Ying Liang, Sheng Tong

Markey Cancer Center Faculty Publications

In recent years, using pharmacological ascorbic acid has emerged as a promising therapeutic approach in cancer treatment, owing to its capacity to induce extracellular hydrogen peroxide (H2O 2) production in solid tumors. The H2 O 2 is then converted into cytotoxic hydroxyl free radicals (HO•) by redox-active Fe2+ inside cells. However, the high dosage of ascorbic acid required for efficacy is hampered by adverse effects such as kidney stone formation. In a recent study, we demonstrated the efficient catalytic conver- sion of H2 O2 to HO• by wüstite (Fe 1−xO) nanoparticles (WNPs) through a heterogenous Fenton reaction. Here, we explore …

Tribocorrosion And Metal Release From Austenitic Stainless Steels 304 And 201 In Simulated Cassava Food Contact, Robert Addai, Temitope E. Olowoyo, Thalia E. Standish, Jeffrey Daniel Henderson, Ubong Eduok, Yolanda Hedberg

Chemistry Publications

Cassava is the third most significant calorie source in the tropics. Its processing has changed from traditional methods to stainless steel processing machines. This study investigated the influence of cassava on metal release from two common stainless steels, ASTM 304 and 201, with and without friction, and on tribocorrosion (multianalytically) of 304. Cassava was relatively corrosive and hindered repassivation of the surface oxide of stainless steel, but it also acted as a lubricant against mechanical friction. The combined action of friction and cassava caused a significant increase in iron, chromium, nickel, and manganese release from the stainless steels (30–35- fold …

The Chemistry Of Heavy Elements: Probing Relativistic Chemical Bonding, Barbara Maria Teixeira Costa Peluzo

Chemistry Theses and Dissertations

The bottommost part of the periodic table has a unique chemistry, where the high velocities of the inner-shell electrons prevent their description by the usual Schrödinger equation. The resulting so-called relativistic effects have numerous chemical implications, on both macro and microscale, ranging from physical properties to reactivity. However, experimental probes on these intriguing atoms are limited by their natural availability and, more importantly, the danger associated with their radioactivity. Quantum chemical calculations, on the other hand, face the challenge of far more complex algebra, which demands substantial computational resources. Relativistic Hamiltonians, which act over all electrons in the system, are …

Poly(Thioether) Thermosets With Gated Photodegradation, Surabhi Jha

Dissertations

Photodegradable polymer networks are attractive due to the precise spatiotemporal control and large-area applicability of light. Chemical linkages that enable these polymer networks to be photo-responsive, also hinder their applicability in ambient light. Photostable and photodegradable networks have recently been reported to overcome this challenge by combining other stimuli with light for degradation. We report the design of a network that responds to a simultaneous, dual stimulus for photodegradation. We design poly(thioether acetal) networks with benzylidene acetal moieties that are known to undergo β-scission in the presence of free thiols. By blocking these free thiols with a thermally labile protecting …

Surface Structures And Properties Of High-Voltage Licoo2: Reviews And Prospects, Jian-Jun Fang, Yu-Hao Du, Zi-Jian Li, Wen-Guang Fan, Heng-Yu Ren, Hao-Cong Yi, Qing-He Zhao, Feng Pan

Journal of Electrochemistry

Nowadays, the development of high-voltage LiCoO₂ (lithium cobalt oxide, LCO) cathodes has attracted the widespread attention from both the academic and industry fields. Among the multiple concerns, researches on the surface issues would provide the most effective performance optimization pathway for the synthesis of high-voltage LCO. In this work, the issues of high-voltage LCO, including the phase transitions and crack formation, the oxygen redox related issues and side reactions, as well as the surface structure degradation, have been systematically reviewed. Then, we further clarify the surface modulations, and the interplay between the surface modulation and electrolyte tuning. Finally, we …

In Situ Diffuse Reflectance Spectroelectrochemistry Of Cathode Materials In Lithium-Ion Batteries, Lu-Lu Chen, Hao-Ran Li, Wei-Yi Liu, Wei Wang

Journal of Electrochemistry

Developing in situ spectroelectrochemistry methods, which can provide detailed information about species transformation during electrochemical reactions, is very important for studying electrode reaction mechanisms and improving battery performance. Studying real-time changes in the surface of electrode materials during normal operation can be an effective way to assess and optimize the practical performance of electrode materials, thus, in situ and in operando characterization techniques are particularly important. However, batteries are hard to be studied by in situ characterization measurements due to their hermetically sealed shells, and there is still much room for battery characterizations. In this work, a specially designed battery …

Molybdenum Disulfide And Carbon Nanotubes Composite Electrode For Electrochemical Conversion Of Salinity Gradient Energy, Jia-Jun Li, Wei-Bin Zhang, Xin-Yu Liu, Jing-Lei Yang, Yi Yin, Ze-Qin Yang, Xue-Jing Ma

Journal of Electrochemistry

The ocean accounts for 97% of the total water resources on earth, covering over 70% of the map's surface area. With the continuous consumption of non-renewable energy sources such as fossil fuels and the rapid development of renewable energy, humans are increasingly paying attention to the utilization of ocean resources. Ocean energy includes tidal energy, wave energy, temperature difference energy, and salinity gradient energy. Salinity gradient energy is the energy generated by the interaction of seawater and fresh water, which is the ocean energy existing in the form of chemical energy. This energy is mostly generated in estuaries. The osmotic …

Designing Dual-Responsive Drug Delivery Systems: The Role Of Phase Change Materials And Metal-Organic Frameworks., Wanying Wei, Ping Lu

College of Science & Mathematics Departmental Research

Stimuli-responsive drug delivery systems (DDSs) offer precise control over drug release, enhancing therapeutic efficacy and minimizing side effects. This review focuses on DDSs that leverage the unique capabilities of phase change materials (PCMs) and metal-organic frameworks (MOFs) to achieve controlled drug release in response to pH and temperature changes. Specifically, this review highlights the use of a combination of lauric and stearic acids as PCMs that melt slightly above body temperature, providing a thermally responsive mechanism for drug release. Additionally, this review delves into the properties of zeolitic imidazolate framework-8 (ZIF-8), a stable MOF under physiological conditions that decomposes in …

Analysis On Development Trend Of Global Hypersonic Technology, Xiaorong Huang, Yunwei Chen, Haichen Zhou

Bulletin of Chinese Academy of Sciences (Chinese Version)

Hypersonic technology is a key technology in the aerospace field in the future and is of very important strategic and forward-looking significance. Using bibliometric methods, it is found that research on hypersonic technology is mainly concentrated in the military field, among which power propulsion technology, navigation guidance and control technology, thermal protection technology and new materials are important research directions in this field. After sorting out the research and development situation of various countries, it is found that the relevant core technologies related to the development of hypersonic weapons are still the focus of future research. At the same time, …

Thermal Effects On The Voc-Sensitive Polydimethylsiloxane Holographic Gratings, Aleksandra Hernik, Faolan Radford Mcgovern, Patrick Iftime, Izabela Naydenova

Conference Papers

The imperative for monitoring volatile organic compounds (VOCs) emerges from their harmful impact on human health when inhaled excessively over a long term. Polydimethylsiloxane (PDMS), valued for its transparency and excellent flexibility, has already been demonstrated as a promising biocompatible and cost-effective transducer for optical VOCs sensing. Moreover, it facilitates further functionalisation with adsorbing materials to enhance sensitivity and selectivity for specific VOCs detection. We fabricated and examined PDMS-based surface diffraction gratings after exposure to selected VOCs, demonstrating different response for polar and non-polar molecules. Investigated gratings were prepared by replicating sinusoidal surface relief structures inscribed in acrylamide photopolymer using …

Investigation Of The Uv-Resistance Of Photopolymerisable Glass For Space Applications, Luca Sorridente, Tatsiana Mikulchyk, Izabela Naydenova, Kevin Murphy

Articles

The progress of space based scientific research leads to an increasing demand for more efficient and less bulky instruments. Conventional refractive elements make up a critical part of many optical instruments launched into space; however, they can be bulky and heavy. Holographic optical elements are an efficient alternative to replace the conventional optical elements as they are lightweight and can be miniaturized. Current materials typically used for volume holographic optical elements are not robust enough for use in space environment. Recently a promising photopolymerisable glass has been developed using a sol-gel technique, which can provide dry layers suitable for holographic …

Photopolymer Material Durability And Safety In Holographic Diffusers For Visual Applications, Matthew Hellis, Alan Casey, Edoardo Splendi, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Articles

This study introduces novel holographic diffuser applications employing acrylamide- or diacetone acrylamide-based photopolymers, patterned within the volume on a micron scale by a single-beam holographic recording process. These diffusers have previously been presented as potential treatments for amblyopia and diplopia. This work has now been extended to spectrometric analysis to determine their properties under broadband light. Diffusive elements with higher diffusion efficiencies exhibited a marginal reduction (< 5%) in diffusion efficiency across most of the visible spectrum. Given the intended application of these holographic diffusers, cytotoxicity assessments were also performed. This is significant as there is a difference in toxicity between the crystalline acrylamide (classified as a category 3 material) and diacetone acrylamide (classified as a category 4 material). The findings indicated substantially lower toxicity in holograms produced with diacetone acrylamide-based photopolymer. The accelerated ageing of both formulations of holographic diffusers indicated that the acrylamide-based holographic diffusers did not reduce efficacy in the 292 days of ageing. The diacetone acrylamide-based holographic diffusers exhibited reduced efficacy by day 182. Despite this, both formulations have been shown to perform for prolonged periods as the treatment modality would require. These results emphasise that holographic diffusers exhibit minimal spectral impact, and longevity on the scale of treatment regimes which are crucial considerations for their prospective use case as treatments for amblyopia and diplopia.

Activity Descriptors As Tools For Designing Highly Efficient Electrocatalysts For Water Splitting, Aya Gomaa

Theses and Dissertations

There is an uprising urge to design efficient, active, and durable catalysts to achieve sustainable hydrogen production. The unambiguity of which material should be used pushed the scientific community to devote enormous efforts in exploring different elements with different ratios on trial and error bases. However, the bridge between the theoretical calculation and the experiments introduced a new realm of designing efficient catalysts by introducing the concept of activity descriptors. In the first part of the thesis, the ability to convert waste stainless steel (SS) 316L meshes into highly efficient and durable oxygen evolution reaction (OER) catalysts is demonstrated. The …

Zinc Oxide Nanostructures Synthesized By Hot Water Treatment For The Photocatalytic Degradation Of Organic Pollutants In Water, Ranjitha Kumarapuram Hariharalakshmanan

Theses and Dissertations

Photocatalysis using nanostructured semiconductors for the degradation of organic pollutants has received significant attention as an advanced water treatment method. A photocatalyst absorbs light with energy greater than or equal to its band gap and generates electron-hole pairs. These electrons and holes take part in redox reactions in water to generate reactive oxygen species, such as hydroxyl radicals and superoxide anions, which can break down organic contaminants. However, this method has some challenges, such as electron-hole recombination, which reduces the efficiency, high cost of nanostructure synthesis, and reduced durability of nanostructured photocatalysts in suspension form. The immobilization of photocatalyst nanostructures …

Molecular-To-Continuum Scale Modeling Of Aerosols: Atmospheric Application And Beyond, Ella Ivanova

Dissertations

Aerosol modeling is critical for various applications, such as climate forecasting, air quality, and human health impact assessment. During their lifetime, aerosols undergo a complex evolution, usually divided into several stages — formation, processing, transport, and removal — that occur on different scales. Thus, the choice of modeling methods depends on the stage considered. For example, certain stages of particle formation may require nano-scale modeling while aerosol-cloud interactions span from microscale to mesoscale. This study examines the modeling of aerosol behavior over a wide range of scales, from nano to microscale, with implications to mesoscale.

This dissertation focuses on two …

Recent Advance In Electrochemical Dehalogenative Deuteration, Peng-Fei Li, Guang-Sheng Kou, Li-Ping Qi, You-Ai Qiu

Journal of Electrochemistry

In recent years, the incorporation of deuterium atoms into organic compounds has emerged as a vital focus in the development of pharmaceutical molecules. This trend is driven by the increasing recognition of the significance of compounds containing deuterium atoms across various domains, including materials and biopharmaceuticals, where they have found widespread applications in mechanistic studies within the realms of chemistry and biology. Meanwhile, organic electrochemistry, as a relatively environmentally friendly catalytic mode with broad adaptability to redox reactions, has emerged as a crucial alternative to traditional halogen-deuterium exchange in the context of the reduction deuteration of halides. This approach circumvents …

Comparison Of Ligands In Palladium-Catalyzed Electrochemical Allyl 4-Pyridinylation, Wei-Jie Ding, Chun-Hui Yang, Zhong-Tao Feng, Shi-Rong Lu, Xu Cheng

Journal of Electrochemistry

4-CN-pyridine is a widely applied 4-pyridinylation reagent for diverse transformations. Conventionally, the reaction proceeds via an open-shell radical cross-coupling pathway. Following our previous study, in this work, we report the Pd-catalyzed allyl 4-pyrinylation reaction under electrochemical conditions. The reaction proceeds via radical-polar crossover pathway in which the role of phosphine ligand in reactivity and selectivity was extensively investigated.

Nickel-Catalyzed Α-Arylation Of Α-Cyanoacetates Enabled By Electrochemistry, Zi-Meng Li, Zhang-Jian Li, Anat Milo, Ping Fang, Tian-Sheng Mei

Journal of Electrochemistry

β-Amino acids have a wide range of applications in the field of pharmaceuticals. Utilizing a combination strategy of nickel catalysis and paired electrolysis, a catalytic α-arylation protocol of carbonyl compounds has been developed. This protocol affords various a-aryl-a-cyanoacetates, which can be reduced to high-value-added α-aryl-β-amino acids. The cross-coupling reaction of electron-deficient aryl bromides with a-cyanoacetates achieves the expected products with good yields and functional group compatibility under mild conditions. Excessive electron-richness in initial aryl bromides facilitates the self-coupling of desired products. DFT calculations confirm that the presence of electron-rich aryl substitutions decreases the reduction potentials of the product anions, making …

Holographic Multiplexing In A Photopolymerisable Hybrid Sol-Gel, Pamela Stoeva, Tatsiana Mikulchyk, Izabela Naydenova, Kevin Murphy

Articles

Holographic multiplexing techniques enhance functionality and information storage by leveraging the inherent selectivity of holograms. This is crucial for advancing holographic sensors, which excel in simultaneously detecting multiple parameters from a single input signal. This study explores the potential of the recent photopolymerisable hybrid sol-gel (PHSG) material for application in Space sensing systems through the investigation of its holographic angular multiplexing capabilities. For the first time, to the best of our knowledge, we report the successful recording of up to five angularly multiplexed gratings with diffraction efficiencies (DE) ≥ 15% in 187 ± 18 µm PHSG layers. A 3 mW/cm2 …

Non-Destructive Determination Of Surface Area In Reverse Phase Chromatographic Columns, Margaret Figus

Seton Hall University Dissertations and Theses (ETDs)

Excess adsorption isotherms of acetonitrile and methanol from water were measured on eight commercial columns. Columns used in this study represent the latest examples in column development and include three different poroshell columns (Kinotex C18, Ascentis C18, and Halo C18) as well as conventional columns with significantly different adsorbent geometries (Allure C18, YMC C18) and various hybrid-silica columns (Gemini C18, Xterra C18, and XBridge C18). Comparison of the excess adsorption isotherms measured on all these columns and expressed in surface-specific form demonstrated significant similarity of the adsorption properties of all columns, which allows the introduction of the Standard Excess Adsorption …