Materials Chemistry Commons^™

Introduction Of Development And Application Technology Of Organic Additives For Acid Copper Electroplating, Hao-Bin Zou, Chao-Li Tan, Wei Xiong, Dao-Lin Xi, Bin-Yun Liu

Journal of Electrochemistry

Acid copper electroplating is one of the key technologies in buildup multilayer PCB (BUM-PCB) manufacture process and the most important technique to achieve electrical interconnection between any layer and high-density interconnection in a substrate. This article introduces the research focus of organic additives used in acid copper electroplating, and developing different kinds of micro-via filling copper electroplating technique applied in various scenarios, and some other technical problems from applications. First of all, according to the chronopotentiometric (CP) experiment results, the levelers with different polymeric molecular structures exhibited various responses of cupric deposition potential along with their increased concentrations, which is …

Study On The Effect Of Additives In The Electrodeposition Of Sn-Ag-Cu Ternary Alloy Solder, Hua Miao, Ming-Rui Li, Wen-Zhong Zou, Guo-Yun Zhou, Shou-Xu Wang, Xiao-Jing Ye, Kai Zhu

Journal of Electrochemistry

Sn-Ag-Cu ternary alloy is the most ideal substitute for Sn-Pb alloy at present, and can be prepared by electrodeposition with high production efficiency, simple equipment, easy maintenance and excellent coating performance. The coordination system of the electroplating solution was investigated through the Hull cell experiment. The type of brighteners used in the plating solution and the ratio of the two brighteners were determined through the microscopic morphologic characterization, electrochemical corrosion test and cathodic polarization curve test. In addition, the dispersant and stabilizer were studied by observing the microscopic morphology and measuring the concentration change of Sn²⁺ ions in the …

Optimization Of Pulse Plating Additives And Plating Parameters For High Aspect Ratio Through Holes, Kai Yang, Ji-Da Chen, Shi-Jin Chen, Wei-Lian Xu, Mao-Gui Guo, Jin-Chao Liao, Zeng-Kun Wu

Journal of Electrochemistry

As an important component in electronic products, printed circuit board (PCB) plays a supporting and interconnecting role for the electronic components in it. With the development of communication technology, electronic products are developing in the direction of “thin, light and small”, and high density interconnection (HDI) comes into being. Due to the high-density interconnection characteristics of HDI boards, the thickness of the board is increasing. At the same time, in order to reserve space for the laying of fine lines on the subsequent board surface, the diameter of the through holes on the board is also decreasing, so the depth-diameter …

An Investigation On The Interface Corrosion Behaviors Of Cobalt Interconnects In Chemical Mechanical Polishing Slurry, Kai-Xuan Qin, Peng-Fei Chang, Yu-Lin Huang, Ming Li, Tao Hang

Journal of Electrochemistry

Cobalt is widely regarded as the most promising interconnect material for 10 nm node and beyond. The development of a chemical mechanical planarization (CMP) slurry suitable for cobalt interconnect is a critical component for the application of cobalt interconnect. During CMP process of the interconnect layer, the achievement of high-quality surface after planarization is greatly challenged by the metal corrosion in CMP slurry. In this contribution, the corrosion behavior of cobalt in a slurry with potassium persulfate (KPS) as an oxidizer, glycine as a complexing agent, and benzotriazole (BTA) as an inhibitor was investigated. Static erosion rates (SER) of cobalt …

Electrochemical Sers Study Of Benzotriazole And 3-Mercapto-1-Propanesulfonate In Acidic Solution On Copper Electrode, Yin-Fei Shen, Yan-Li Chen, Sheng-Xu Wang, Ye Zhu, Wen-Chang Wang, Min-Xian Wu, Zhi-Dong Chen

Journal of Electrochemistry

Since the development of acid copper plating technology, the role of additives is indispensable. In addition to the main salt copper sulfate and supporting electrolyte sulfuric acid, suppressors, accelerators, levelers and chlorine ions (Cl^-) are also required to be added into the plating solution. Appropriate additive system can have a significant impact on the coating or the plating solution, which can help improve the quality of the coating and increase the brightness of the coating. Through electrochemical measurement, vibrational spectroscopy, scanning probe microscopy, molecular dynamics simulation and other methods, researches have a deeper understanding in the adsorption configuration …

Development Status Of Copper Electroplating Filling Technology In Through Glass Via For 3d Interconnections, Zhi-Jing Ji, Hui-Qin Ling, Pei-Lin Wu, Rui-Yi Yu, Da-Quan Yu, Ming Li

Journal of Electrochemistry

With the slow development of Moore's Law, the high density and miniaturization of microelectronic devices put forward higher requirements for advanced packaging technology. As a key technology in 2.5D/3D packaging, interposer technology has been extensively studied. According to different interposer materials, it is mainly divided into organic interposer, silicon interposer and glass interposer. Compared with the through silicon via (TSV) interconnection, the through glass via (TGV) interposer has received extensive attention in the 2.5D/3D advanced packaging field for its advantages of excellent high-frequency electrical characteristics, simple process, low cost, and adjustable coefficient of thermal expansion (CTE). However, the thermal conductivity …

Study On Low Voltage Electrodeposition Of Diamond-Like Carbon Film, Li Wang, Min-Xian Wu, Jun Li, Yan-Li Chen, Wen-Chang Wang, Zhi-Dong Chen

Journal of Electrochemistry

Diamond-like carbon (DLC) films are receiving a lot of attention from the scientific community, thanks to the promise of DLC films for applications in microelectronics and optoelectronics. Usually, electrodeposition is the preferred common technique because of low cost, large deposition area and simplicity of the setup. However, when carbon films are electrodeposited on a stainless steel, high cell voltages (≥1000 V) are required owing to the low electric conductivity of the organic solvents. This work has developed a new electrolyte system that could achieve carbon deposition on a stainless steel under a low applied cell voltage. The DLC films were …

Study On Weak Alkaline Cyanide-Free Silver Plating Process For Etching Lead Frame, Jian-Wei Zhao, Hai-Feng Zhu, Xiao-Hui Yu, Gui-Yun Yuan, Zhi Sun

Journal of Electrochemistry

As a new development direction of integrated circuit chip carrier, etched lead frame has been gradually applied in microelectronics industry in recent years. Since the preparation of the etched lead frame requires the use of multiple layers of non-alkali-resistant photoresist films with specific patterns, and the traditional cyanide silver plating is unable to meet this requirement, making that the development of weakly alkaline cyanide free silver plating process has great significance. In this paper, a weak alkaline silver plating process based on 5,5-dimethylhydantoin (DMH) cyanide-free silver plating system was studied. The electrodeposition behavior of the system and the nucleation mechanism …

Effect Of Sodium Alcohol Thiyl Propane Sulfonate On Electrolysis Of High Performance Copper Foil For Lithium Ion Batteries, Sen Yang, Wen-Chang Wang, Ran Zhang, Shui-Ping Qin, Min-Xian Wu, Naotoshi Mitsuzaki, Zhi-Dong Chen

Journal of Electrochemistry

Electrolytic copper foils have been widely used in printed circuit boards and lithium-ion batteries due to their simple production process and high economic value. In the process of electrolysis foil making, additives can greatly improve the performance of electrolytic copper foils. In this work, the copper foils were prepared in a self-designed plate electrodeposition device of which the operating principles were in accordance with those of actual industrial production. A series of the Virgin Make-up Solution (VMS: 312.5 g·L^-1 CuSO₄·5H₂O, 100 g·L^-1 H₂SO₄, 50 mg·L^-1 Cl^-) containing …

Microstructure Of Electrodeposited Copper Foil: Discussion On The Mechanism Model Of Three-Dimensional Electrocrystallization, Ren-Zhi Liu, Ping-Ling Xie, Chong Wang

Journal of Electrochemistry

The manufacturing of electrolytic copper foil has attracted more and more attention with the extensive applications of printed circuit board and lithium battery. The industrial scale is still extending. Compared with the developments of electroplating equipment and electroplating process, there is limited research on the mechanism of electrodeposition. This paper summarizes the manufacturing process of electrodeposited copper foil and analyzes the differences of various electroplating parameters in different electrodeposited copper technologies, and points out the important role of electrodeposition current density in the formation of copper foil. By showing and comparing the microstructures of different electrodeposited copper foils, the influences …

Biomimetic And Medical Applications Of Hollow Nanoscale Structures, Justin Fang

Dissertations, Theses, and Capstone Projects

Materials whose structure incorporates nanoscale void spaces have multiple possible uses, whether in a bulk form or as individual particles, due to the combination of high surface area ratios and nanoscale material properties. This thesis will explore a few of these possibilities, concentrating on potential biomimetic and biomedical applications, for two materials: metal- organic frameworks and superparamagnetic iron oxide nanocages.

Metal-organic frameworks consist of metal ions such as Cu2+ which have highly porous lattice structures allowing them to absorb and release guest molecules such as peptides like diphenylalanine; this stored chemical energy can be turned into kinetic energy and used …

Development Of Optical Nanomaterial For Enhanced Cerenkov Imaging, Qize Zhang

Dissertations, Theses, and Capstone Projects

Cancer is a significant public health problem worldwide and is the second leading cause of death in the United States. Imaging has increasingly been used over the last two decades to improve the diagnosis and guidance of tumor tissue removal surgery. Among the most widely used techniques for in vivo imaging are planar and tomographic fluorescence imaging and bioluminescence imaging. Despite their utility, these techniques are primarily restricted to preclinical use. Factors that have prevented translation from the bench to the bedside include depth-penetration considerations, regulatory issues, and toxicity. A recent development in nuclear imaging has been the ability to …

Electrochemical Synthesis Of Acetylpyrazine, Lin Mao, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Acetylpyrazine is naturally presented in hazelnuts, peanuts, and sesame seeds. As an important food additive, it is widely used in baked foods, meat, sesame and tobacco. At the same time, acetylpyrazine is also an important pharmaceutical intermediate, which is used in the syntheses of anti-tuberculosis drugs, anti-tumor, anti-malaria, anti-viral, antibacterial and treatments of epilepsy, pain and Parkinson’s drugs. At present, the synthesis methods of acetylpyrazine include oxidation method, multi-step method and Grignard reagent method, which have the disadvantages of low yield, cumbersome process, severe reaction conditions and high cost. In this study, acetylation of pyrazine was used to synthesize acetylpyrazine …

Electrochemical Voltammetric Behavior Of Sulfur Mustard On The Bare Pt Electrode, Yu-Lin Yang, Jie Sun, Tian Zhou, Ji-Gang Li, Shou-Ping Wei

Journal of Electrochemistry

The sulfur mustard (bis(2-chloroethyl) sulphide, HD), one of highly toxic chemical weapon agents, can damage the alive tissue cells (such as skin, lung, respiratory mucosa and so on), and cause carcinogenic and mutagenic effects for a long time exposure, which imposes a great threat not only to the human health, but also to the sustainable development of the society. With its convenience, high sensitivity and rapid response, electrochemical technology exhibits considerable potential in the field-deployed detection toward HD, but the related reports are rare. Herein, the electrochemical behavior of HD on the bare Pt electrode was investigated by electrochemical measurements, …

Electrocatalytic "Volcano-Type" Effect Of Nano-Tio2 (A)/(R) Phase Content In Pt/Tio2-CnX Catalyst, Ai-Lin Cui, Yang Bai, Hong-Ying Yu, Hui-Min Meng

Journal of Electrochemistry

The relationship between the electrochemical activity of fuel cell catalysts and Pt particle size, as well as the catalyst support and co-catalyst is still unclear. In this work, FESEM, XRD, BET, TEM and CV techniques were adopted to investigate the effects of TiO₂ anatase (A)/rutile (R) phases content on the electrochemical activity of Pt electrocatalyst. The results showed that the anatase-rutile phase transformation occurred during the heat treatment of TiO₂ at 700 ~ 900 ^oC accompanied by the growth of two-phase crystalline size, and anatase was completely transformed into rutile at 900 ^oC. TEM results revealed …

Biofouling Behaviors Of Pure Titanium Surface Polarized At Different Potentials, Zhao-Xia Dai, Da-Jiang Zheng, Guang-Ling Song, Dan-Qing Feng, Pei Su

Journal of Electrochemistry

Titanium (Ti) and its alloys are commonly used as engineering materials. Although they have been widely used in marine environments, they are also facing serious threats of biofouling. Therefore, it is necessary to investigate the relationship between electrochemical behavior and bioaffinity of titanium oxide film in seawater to explore effective surface treatment technology to reduce biofouling. In this work, the cathodic potential of -0.8 V_SCE and the passivation potential of 0.5 V_SCE were directly applied to the TA2 Ti in artificial seawater for potentionstatic polarization treatment to prepare two kinds of surface films with different states and then …

Study And Improvement On Expansion Property Of Silicon Oxide, Wei-Chuan Qiao, Fang-Ru Li, Jin-Lin Xiao, Li-Juan Qu, Xiao Zhao, Meng Zhang, Chun-Lei Pang, Zi-Kun Li, Jian-Guo Ren, Xue-Qin He

Journal of Electrochemistry

The silicon-based anode materials have the potential to meet the ever-increasing demand for energy density in lithium-ion batteries market owing to their high theoretical specific capacity. Unfortunately, their commercialization was hindered by the continuous volume expansion. Herein, the expansion characteristics and corresponding mechanism of the silicon oxide and graphite-silicon oxide composites were investigated by in-situ displacement detection systematically. The results showed that the expansion property was improved by material process modifications. During the de/lithiation processes of graphite, the expansion ratio in 30% ~ 50% SOC changed little because of the small interlayer spacing variation of the intercalated graphite. …

Effect Of Chloride Ion On Electrochemical Behavior Of Silver Electrodeposition In Chcl-Urea Low Eutectic Solvent, Chong-Bo Zhan, Run-Jia Zhang, Xu Fu, Hai-Jing Sun, Xin Zhou, Bao-Jie Wang, Jie Sun

Journal of Electrochemistry

Metallic silver coating has been widely used in the fields of microelectronics industry, catalyst, sensor and preparation of magnetoresistive materials because of its excellent corrosion resistance, good lubricity, high conductivity, excellent decoration and high catalysis. Compared with the traditional aqueous solution system, the research on metal electrodeposition in ionic liquid system is developing rapidly. In addition, additives are the key factors in the silver plating process. Adding a small amount of organic or inorganic additives to the plating solution will significantly change the coating properties, such as improving brightness, hardness and ductility. In this paper, using choline chloride urea (ChCl-Urea) …

Preparation And Properties Of Gcp-Supported Palladium Particles Composite Towards Electrochemical Ammonia Synthesis, Ying-Chao Wang, Zi-Zai Ma, Yi-Fan Wu, Xiao-Guang Wang

Journal of Electrochemistry

Ammonia (NH₃) plays an essential role in agriculture and modern industries. Electrochemical fixation of nitrogen (N₂) to ammonia (NRR) under ambient conditions with renewable electricity is a promising strategy to replace the industrial Haber-Bosch method. However, it usually suffers from extremely poor ammonia yield and low Faraday efficiency due to the poor electrocatalysts. Therefore, intensive studies have been devoted to developing efficient NRR catalysts till now. Among them, palladium (Pd) can capture protons in the aqueous phase to form stable α-PdH, which balances the competitive adsorption between nitrogen and protons as well as reduces the …

Simultaneous Hydrogen And (Nh4)2So4 Productions From Desulfurization Wastewater Electrolysis Using Mea Electrolyser, Ju-Cai Wei, Lin Shi, Xu Wu

Journal of Electrochemistry

It is preferred to simultaneously recover resource and energy from waster. Sulfur dioxide, SO₂, a common air pollutant, a potential energy resource, is a key link to sulfur nature circulation. SO₂ can be conversed to NH₄HSO₃ and (NH₄)₂SO₃ during the ammonia desulfurization process, which can be used to produce (NH₄)₂SO₄ fertilizer. For high quality (NH₄)₂SO₄ fertilizer and high heat transfer efficiency of the evaporative crystallization, HSO₃^- or SO₃^2- needs to be oxidized to form SO …

Transistion Metal Chalcogenides And Phosphides For Energy Storage And Conversion Through Water Splitting, Kelsey Thompson

Electronic Theses & Dissertations

In contemporary society, there are many different ways that energy is used in daily life. From applications that require a high energy density to long-term storage in a stable manner, the requirements for energy usage are diverse. Therefore, the greater the number of uses a designed material exhibits, the more practical it may be for wide-scale manufacture. Two areas of particular interest for energy applications are fuel cells (to generate energy) and supercapacitors (to store energy). To provide cheaper and more durable alternatives for energy storage, electrodes containing CoMoO₄, NiMoO₄, CoMoS₄, NiMoS₄, …

One-Step Synthesis Of Corn Oil-Based Polyol For Highly Flame-Retardant Rigid Polyurethane Foams, Tenzin Ingsel

Electronic Theses & Dissertations

Rigid polyurethane foams (RPUF), heavily utilized in construction, refrigeration, and the automotive industries, are a significant class of polyurethanes. They can substantially enhance energy efficiency by improving thermal insulation. However, the application of petrochemical sources in polyurethane has raised environmental concerns.

Such concerns call for the development and application of new bio-based polyurethanes to potentially reduce humanity's over-reliance on nonrenewable sources.

In this work, corn oil-based polyol was synthesized via popularized thiol-ene reaction. The obtained polyol was characterized by wet chemistry methods, spectroscopic evaluations, and chromatography. Non-halogenated flame retardants of cost-effective and environmentally friendly nature were incorporated into the polyurethane …

Biomaterials: From Scaffold Design To Implant Optimization, Jennifer Marie Armen

Electronic Theses and Dissertations

This work encompasses three individual projects concerning biomaterials and their modifications. Chemically-Induced Cross-Linking of Peptidic Fibrils for Scaffolding Polymeric Particles and Macrophages EAK16-II (EAK) is a self-assembling peptide (SAP) that forms β-sheets and βfibrils through ionic-complementary interactions at physiological ionic strengths. The soft materials can be injected in vivo, creating depots of drugs and cells for rendering pharmacological and biological actions. The scope of the applications of EAK is sought to extend to tissues through which the flow of extracellular fluid tends to be limited. In such anatomical locales the rate and extent of the fibrilization are limited insofar as …

A Modular Synthesis Of Processable And Thermally Stable Semi-Fluorinated Aryl Ether Polymers Via Step-Growth Polymerization Of Fluoroalkenes, Ketki Eknath Shelar

Theses and Dissertations

Tailored fluoropolymers remain the leading choice for a wide variety of advanced high-performance applications, including electronic/optical and energy conversion, owing to their unique blend of complementary high-performance properties. Amorphous semi-fluorinated polymers exhibit improved solubility and melt processability when compared to traditional perfluoropolymers. A leading class of semi-fluorinated aryl ether polymers includes perfluorocyclobutyl (PFCB), perfluorocycloalkenyl (PFCA), and fluoroarylene vinylene ether (FAVE) polymers. Monomers containing aromatic trifluorovinyl ethers (TFVE) are used to synthesize PFCB polymers via radical-mediated [2+2] cyclodimerization. On the other hand, FAVE and PFCA polymers are polymerized via base-mediated nucleophilic addition/elimination of bisphenols with TFVE monomers and decafluorocyclohexene respectively. The …

Functionalized Biochar Electrodes For Asymmetric Capacitive Deionization, Hellen Stephanie

Theses and Dissertations

Electrosorption-based capacitive deionization (CDI) has become a viable process for brackish water desalination and defluoridation. In this study, activated Douglas fir biochar is used as a low-cost electrode material with adsorption capacity comparable to activated carbon obtained from biomass precursors. Adding functional groups to the activated biochar enhanced salt removal capacity, providing cation and anion selectivity. The functionalized electrodes were prepared by Nafion, titanium isopropoxide, and p-phenylenediamine treatment, respectively, which introduced sulfonate, titanium dioxide and amine functional groups to the electrode surface. These modification methods are versatile and can be easily performed without sophisticated laboratory environment. Modified biochar electrodes …

Multifunctional Carbon-Supported Cobalt-Nickel Compounds For Water Splitting And Energy Storage Applications, Wang Lin

Electronic Theses & Dissertations

In order to effectively reduce carbon emission and achieve the goal of mitigating climate change, hydrogen energy has high hopes as a representative of green energy. According to the most current and updated research, compounds of cobalt and nickel have been widely studied as alternatives instead noble metal materials as catalysts for the electrolysis of water. Based on some other research reports, a hydrothermal method to grow cobalt-nickel hydroxide on nickel foam that has been carbonized in advance was proposed. To compare the modification results of these materials by different activation methods, calcination, sulfidation, and phosphating were performed on the …

Analysis Of The Light Responsive Azobenzene Peptide Nucleic Acid Duplexes, Kat Nguyen

Honors College Theses

Peptide nucleic acids (PNAs) are oligonucleotide analogues in which the sugar-phosphate backbone has been replaced by a pseudopeptide skeleton. Since PNAs use the natural nucleobases (Adenine, Thymine, Cytosine, Uracil, and Guanine) found in either DNA and/or RNA, they are able to hybridize according to Watson-Crick base-pairing to form duplexes. PNA is a promising therapeutic agent because they can function as antigene or antisense chemical agents. To further enhance their utility, we aim to incorporate a photoswitchable moiety using azobenzene. Here, we report the results of the synthesis and purification of a photoswitchable 11 mer PNA along with initial characterization efforts.

Real-Time Monitoring Of Paraquat Photodegradation Using Colloidal Gold Surface Enhanced Raman Spectroscopy, Nathan Wilson

Masters Theses & Specialist Projects

Monitoring chemical reactions in aqueous solution is a challenge because most instrumental techniques either are not suited for the rapid timescales, are not sensitive enough to detect products at low concentrations, or do not have sufficient structure-to-spectrum relationships. Raman spectroscopy is a promising method to monitor reactions, as it is fast, dependent on chemical structure, and has little interference from water. However, Raman scattering is generally very weak. Surface-enhanced Raman spectroscopy (SERS) improves the signal strength of Raman spectroscopy by using a metal surface plasmon, or oscillation of the surface’s electrons, to allow for highly selective and sensitive detection and …

Light Harvesting And Electrically Conducting Metal-Organic Frameworks, Monica Gordillo Varela

All Dissertations

Composed of metal clusters nodes and organic linkers, metal-organic frameworks (MOFs) have emerged as versatile platforms with unparalleled chemical and structural tunability, synthetic facility, permanent porosity, and size-selective guest encapsulation capability. These features make them potential candidates for a variety of applications such as gas storage,drug delivery, catalysis,and sensing. In recent years, the introduction of redox- and photoactive components have yielded stimuli-responsive electronic and photonic MOFs and expanded their utility in molecular electronics and energy storage devices/technologies.

Chapter one describes the light-harvesting ability of a porphyrin-based MOF. Herein, we have demonstrated spontaneous solvothermal growth of [100]-oriented uniform pillared-porphyrin framework-11 (PPF-11) …

Synthesis Of Inorganic-Organic Perovskite Hybrid Materials Via A Microwave Assisted Method, Anamika Poduval

LSU New Orleans Theses and Dissertations

The research presented here focusses on fabrication of organic modified inorganic two-dimensional and three-dimensional materials via microwave assisted methods. These hybrid materials are of importance due to their capacity to incorporate the characteristics of both organic and inorganic components. Microwave methods have been utilized to expedite the topochemical modification of layered perovskites. In one set of studies, microwave assisted grafting reactions were performed on layered perovskite (HLaNb₂O₇) materials with a series of hydroxy carboxylic acids. The reactivities of these organic compounds with the layered perovskites and the influence of precursor, temperature and time are demonstrated. The …