Materials Chemistry Commons^™

Cysteine And Cystamine Co-Self-Assembled Monolayers For In Vivo Detection Of Ascorbic Acid, Yue Zhang, Tao-Tao Feng, Wen-Liang Ji, Mei-Ning Zhang

Journal of Electrochemistry

Self-assembled monolayers (SAMs), which form highly ordered monolayers on the electrode surface through the gold-suffer bond, have attracted much attention in recent years. This stable layer not only can regulate the wettable properties of surface, but also can act as a promoter towards redox-active molecules. Here, we developed a simple and effective method to construct cysteine and cystamine co-self-assembled monolayer on gold microelectrode for  in vivo detection of ascorbic acid (AA). The molar ratio at 1:1 of mixed monolayer has been found the optimum to enhance the electron-transfer kinetics of AA oxidation at low potential (ca. 0.10 V), meanwhile, it …

Current Statuses And Challenges Of Wearable, Flexible Electronic Sensors And Energy Storage Devices, Zhong-Qian Song, Fang-Jie Han, Hui-Jun Kong, Jia-Nan Xu, Yu Bao, Dong-Xue Han, Li Niu

Journal of Electrochemistry

With the developments in the internet of things, artificial intelligence and human-computer interaction technology, soft, flexible and wearable electronic devices provide a novel platform for monitoring of the human vital signs, and recognition of human behaviors to connect human being and machine without consciousness. Recent progresses about wearable and flexible electronics that can provide accurate, non-invasive, long-term and continuous monitoring of human vital sings including pulse, temperature, skin activities, breathing and heart rate are summarized. The working mechanisms, current statuses and challenges in temperature sensor, strain sensor and pressure sensor are discussed. The review concludes with a prospect of current …

Approaches For Sample Characterization And Lithography With Nanoparticles Using Modes Of Scanning Probe Microscopy, Jayne C. Garno, Temitope O. Jegede, Kathryn B. Mckee, Melissia Porter, Autumn E. Webb, Jin Gyun Lee, Neepa Mk Kuruppu Arachchige, Justin R. Ragains, Noémie Elgrishi

Faculty Publications

Measurement and imaging modes of scanning probe microscopy (SPM) have been routinely applied for characterizing systems of nanoparticles; however the evolution of fabrication methods to prepare arrangements of nanoparticles remains a challenge. Reproducible fabrication of surface structures which integrate nanoparticles within ultra-small patterns will require innovative approaches to achieve high throughput and precision. Strategies for nanoscale lithography have been introduced for preparing defined arrangements of nanoparticles on surfaces based on physical or chemical interactions. For example, physisorption was employed for attaching nanoparticles based on colloidal lithography and site-directed assembly. Microfabricated atomic force microscope (AFM) tips with capillary channels have been …

Implementation Of Multivariate Artificial Neural Networks Coupled With Genetic Algorithms For The Multi-Objective Property Prediction And Optimization Of Emulsion Polymers, David Chisholm

Master's Theses

Machine learning has been gaining popularity over the past few decades as computers have become more advanced. On a fundamental level, machine learning consists of the use of computerized statistical methods to analyze data and discover trends that may not have been obvious or otherwise observable previously. These trends can then be used to make predictions on new data and explore entirely new design spaces. Methods vary from simple linear regression to highly complex neural networks, but the end goal is similar. The application of these methods to material property prediction and new material discovery has been of high interest …

Monolayer Triphosphates Mp3 (M = Sn, Ge) With Excellent Basal Catalytic Activity For Hydrogen Evolution Reaction, Hong-Hui Wu, He Huang, Jie Zhong, Song Yu, Qiaobao Zhang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

Atomically thin two-dimensional (2D) materials have received intense research interest due to their novel properties and promising applications in nanodevices. By using density functional theory (DFT) calculations, we investigate catalytic activities of several newly predicted two-dimensional (2D) triphosphides GeP₃, SnP₃ and InP₃ monolayers for hydrogen evolution reaction (HER). The calculation results show that GeP₃ and SnP₃ monolayers are active catalysts for HER with suitable free energy of hydrogen adsorption in the basal plane. In particular, the Gibbs free energy of hydrogen adsorption (ΔG_H*) of GeP₃ is 0.024 eV, a value even …

Rheological Investigations Of Latex-Surfactant-Associative Thickener Aqueous Systems, Bishop I. Hammack

Master's Theses

Surfactants and Thickeners are both additives used in fully-formulated waterborne coatings to provide colloidal stability, thickening, and other functionality. The behavior of each ingredient in a coating must be understood and controlled to maintain colloidal stability as well as balance other desired properties of the liquid coating and the dry paint film. In this work, quaternary systems of Water-Latex-Thickener-Surfactant were investigated to further the understanding of their behavior in coatings. The thickener used was a well characterized, hydrophobically-modified, ethoxylated urethane (HEUR) with two C18 terminal hydrophobes and 795 average repeat units of ethylene oxide as the hydrophilic spacer. Two latexes, …

Nano Fab Lab 63, Brian K. Deemer, Josh Clemons, Nick Brodine, Delaney Fitzsimmons

Mechanical Engineering

Lawrence Livermore National Laboratories (LLNL) has several steps in the production process for ceramic nanofiber tubes that they would like to improve - electrospinning, cutting, rolling, sealing and heat treating. We undertook the challenge to deliver LLNL with a semi-automated process that efficiently integrates the steps of cutting, rolling, and sealing to save time and improve control over end dimensions. In this document, we discuss the technical background of the manufacturing steps currently followed to create nanofiber tubes, identify which steps are incorporated in our prototype and explain how they will interface with one another, define the design requirements, present …

Incorporation Of Gold Nanowires Into Photovoltaic Devices, Scott W. Gordon

LSU New Orleans Theses and Dissertations

To this day, fossil fuels still make up over 80% of the earth’s energy production. Many sources of renewable energy are available, but photovoltaics is the only source with the capacity proven to meet the increasing world energy needs. Third generation devices such as dye-sensitized and organic solar cells have gained much interest due to their cost effectiveness and flexibility but have yet to become commercially viable. Here methods have been studied to improve these devices with the use of Gold nanowire arrays. These additions provide plasmonic and light scattering enhancements in dye-sensitized solar cells. Different TiO2 deposition methods have …

An In-Situ Study Of The Aqueous Speciation Of Uranium (Vi) Under Hydrothermal Conditions, Diwash Dhakal

Graduate Theses/Dissertations

Rigorous study of the speciation distribution of uranyl-chloride bearing solutions under hydrothermal conditions is important to understand the transport mechanism of uranium underground, which is of uttermost interest to parties studying the geological uranium deposits and those studying the possibilities of geological repositories for spent nuclear waste. I report an in-situ Raman spectroscopic study of the speciation distribution of aqueous uranyl-chloride complexes upto 500°C conducted using a HDAC as the high PT spectroscopic cell. The samples studied contained the species UO₂²⁺, UO₂Cl⁺, UO₂Cl₂⁰ and UO₂Cl₃^{- …}

Concentration-Dependent Magnetic Properties Of Mnxnio1-X Novel Inverted Core-Shell Nanoparticles, Md Nazmul Alam

Graduate Theses/Dissertations

The doping concentration (Mn concentration) dependent magnetic properties of NiO@NixMn1-xO novel inverted core-shell magnetic nanoparticles are of great interest of this present research. Primarily, we investigated the oxidation state of Ni from size-dependent four NiO NPs samples, and then studied the variation in the magnetic properties of Mn concentration-dependent NiO@NixMn1-xO CNPs. The NiO nanoparticles were synthesized using a thermal decomposition method. The XRD data indicates that the crystal structure (rock salt) remains fixed in all NiO samples and XPS data shows the oxidation state of size-dependent NiO nanoparticles is 2+. The hydrothermal epitaxy method was used to incorporate Mn in …

Photo-Physical Properties Of Novel Gumbos For Optoelectronic Applications, Thenahandi Prasanthi Deepthika De Silva

LSU Doctoral Dissertations

Organic Light Emitting Diodes (OLEDs) are predicted to revolutionize next generation consumer electronics by offering many advantageous device characteristics, including low power consumption, low heat dissipation, a tunable and wider color gamut, high resolution and contrast, light weight, flexibility, and semi-transparency. However, a major limiting factor for OLEDs to reach their full potential is that only a few known blue OLED emitters with substantial spectral purity and longevity are available to date. Therefore, focus of this research is on understanding and addressing limitations of OLED emitters, with an emphasis on improving the characteristics of blue emitters.

The work presented in …

Application Of X-Ray Grating Interferometry To Polymer/Flame Retardant Blends In Additive Manufacturing, Omoefe Joy Kio

LSU Doctoral Dissertations

X-ray grating interferometry is a nondestructive tool for visualizing the internal structures of samples. Image contrast can be generated from the absorption of X-rays, the change in phase of the beam and small-angle X-ray scattering (dark-field). The attenuation and differential phase data obtained complement each other to give the internal composition of a material and large-scale structural information. The dark-field signal reveals sub-pixel structural detail usually invisible to the attenuation and phase probe, with the potential to highlight size distribution detail in a fashion faster than conventional small-angle scattering techniques. This work applies X-ray grating interferometry to the study of …

Synthesis, Characterization And Crystal Growth Of I2-Ii-Iv-Vi4 And I4-Ii-Iv2-Vi7 Diamond-Like Semiconductors With Potential In Ir-Nlo Applications, Jennifer Glenn

Electronic Theses and Dissertations

In this dissertation, several new and existing diamond-like semiconductors (DLSs) were synthesized and investigated for their potential in infrared nonlinear optical (IR-NLO) applications. In Chapter 2 growth of large single crystals of Li₂MnGeS₄ was carried out using iodine vapor transport and a newly created graphite-tube containment system. This crystallization method produced sizable single crystals on the scale of 2x1x1 mm³, that were used to determine the material’s magnetic properties. Magnetization data indicate that the compound is antiferromagnetic with a Néel temperature of 10 K and an effective magnetic moment of 5.6 /f.u.. The specific heat …

Engineering Multifunctional And Morphologically Diverse Polymer Brush Surfaces, Cassandra M. Reese

Dissertations

The combination of surface-initiated polymerization (SIP) and post-polymerization (PPM) serves as a powerful approach to fabricate complex, multifunctional polymer films, which can be precisely tuned for desired surface engineering applications. Careful manipulation of PPM parameters such as reaction conditions, the tethered brush parameters, and the physical properties of the unbound post-modifier greatly influence the depth of penetration of the post-modifier and the polymer brush compositional heterogeneity. This dissertation focuses on engineering polymer brush surfaces with multifunctional chemistries and tunable morphologies by investigating the PPM parameters that dictate the distribution of post-modifiers on grafted polymer brush surfaces.

The first chapter of …

Deposition Of Platinum Particles On Surface-Modified Carbon Ultramicroelectrodes, Caitlin Millsaps

Undergraduate Honors Theses

Nanoparticles are used as electrocatalysts due to their large surface area-to-volume ratios. Most studies of nanoparticle electrocatalysis are performed on collections of particles on a support, which represent ensemble average behavior influenced by spatial distribution of the nanoparticles. Therefore, recent emphasis has been placed on analyzing electrocatalytic behavior of single particles. The focus here is to develop carbon ultramicro- and nanoelectrode platforms for studying the electrocatalytic properties of single metal nanoparticles. Ultramicroelectrodes were prepared using chemical vapor deposition of carbon in pulled quartz capillaries. Electrode diameters were determined by cyclic voltammetry. Electrodes were modified using a soft nitriding technique to …

Surface Immobilization Of Terpyridine Compounds, Elizabeth Hallett

Chemical Engineering Undergraduate Honors Theses

The deoxydehydration (DODH) of polyols to alkenes is a promising method of producing high-value chemical feedstocks from biomass-derived materials. Current catalytic systems for DODH require the use of costly reducing agents that generate stoichiometric amounts of chemical waste. Immobilizing catalysts on electrode surfaces using chemical linking groups eliminates the need for sacrificial reductants. In this work, glassy carbon electrodes were modified with 4’-(3,4-dihydroxyphenyl)-2,2’:6’,2’’-terpyridine to investigate o-benzoquinone as a potential linking group for DODH, and possibly for other reactions. Previous studies involving electrodes modified with quinone-containing compounds have primarily been focused on catalyzing the oxidation of NADH; the nature or …

Synthesis And Characterization Of Dielectric And Multiferroic Nanocrystalline Transition Metal Oxide Materials And Nanocomposites, Frederick A. Pearsall

Dissertations, Theses, and Capstone Projects

Nanocrystalline transition metal oxides with unique chemical, physical, magnetic and dielectric properties have very broad applications, ranging from photocatalysis, capacitor energy storage and 4-state memory. Frequency stable, high permittivity nanocomposite capacitors produced under mild processing conditions offer an attractive replacement to MLCCs derived from conventional ceramic firing. In one project reported herein, 0-3 nanocomposites were prepared using BaTiO₃ (barium titanate, BTO) nanocrystals, suspended in a poly(furfuryl alcohol) matrix, resulting in a stable, high effective permittivity, low and stable loss dielectric. Effective medium approximations were used to compare this with similar nanocomposite systems. The use of synthesized BTO nanocrystal photocatalysts …

Mild Synthesis Of Perylene Tetracarboxylic Monoanhydrides With Potential Applications In Organic Optoelectronics, Xizhe Zhao

Dissertations, Theses, and Capstone Projects

Perylene tetracarboxylic derivatives are considered good n-type semi-conductors. In past decades, there has been extensive study on their synthesis and electronic properties. Because of the high electron affinity, the ability to form π-π stacks, they have been widely utilized in organic photovoltaic solar cells, field-effect transistors and light-emitting diodes. Many of those applications prefer unsymmetrically substituted perylene tetracarboxylic derivatives. Perylene monoanhydrides are the most versatile intermediates for the preparation of unsymmetrically substituted perylene tetracarboxylic derivatives. In this thesis, I focused on introducing new synthesis methods for perylene monoanhydrides with labile functional group and their potential applications in organic optoelectronics.

In …

Peptide Mediated Co-Assembly Of Porphyrin: Towards Sustainable Biomaterials For Light Harvesting And Catalysis, Wsm Nadeesha K. Wijerathne

Dissertations, Theses, and Capstone Projects

The diverse molecular functions of naturally occurring biomaterials designed from proteins are fundamentally based on a set of conserved building blocks, namely the 20 gene coded amino acids. The supramolecular structures and functions of proteins dictates by the self-assembly, where the complexity of proteins arise from a large number of amino acids. Generation of biomimetic systems that resemble the structures and functions of proteins is of great interest yet challenging due to the tremendous complexity of the natural systems. It is important to investigate alternative strategies to design much simpler systems that exhibit the same or similar function as proteins. …

Raman And Surface Enhanced Raman Spectroscopy For Forensic Analysis: Case Studies On The Identification Of Illicit Substances And Artist Pigments, Abed Haddad

Dissertations, Theses, and Capstone Projects

Raman spectroscopy is an effective tool for detecting trace amounts of material by fingerprint-like vibrational spectra. At times, the weak intensity of Raman scattering can make it difficult to distinguish trace materials. This shortcoming is addressed by surface‐enhanced Raman spectroscopy (SERS), which produces strong signal enhancements when target compounds are near metal nanoparticles. For the first part of this thesis, the identification of fentanyl and carfentanil, main culprits in the opioid epidemic, was done using normal Raman and the SERS spectroscopy. As an aid in the assignment of the spectral lines, a computational model was built using Density Functional Theory …

Development Of Granulated Adsorbent For Clean-Up Of Water Contaminated By Cesium, Esther Alorkpa

Electronic Theses and Dissertations

A study was conducted on sol-gel synthesis of an adsorbent (phosphotungstic acid embedded in silica gel, H-PTA/SiO­₂) of radioactive cesium. A novelty of this work is covalent bonding of PTA to the surface of solid support that prevents leaching from the surface of the material. The sample was granulated with a binder, aluminium oxide (γ-Al₂O₃). Solid-state NMR and FT-IR spectroscopy were used to confirm the presence of Keggin units of PTA in the bound materials. Thermal analysis of H-PTA/SiO­₂ - γ-Al₂O₃ (50 %) showed that the water content in the …

Preparation And Characterization Of Ruthenium-Gold Raman-Active Catalytic Surfaces, Thang Nguyen

Student Scholar Symposium Abstracts and Posters

Heterogeneous reactions at the gas-solid interface play a major role in many important industrial and environmental processes. These reactions typically rely on metal surfaces, to act as a catalyst between gas phase reactants and products. The catalysts lower the transition state barrier in the formation of the products. The mechanisms of reactions on catalysts is often not fully known due to the difficulty of observing the bond breakage and formation between gaseous molecules at the interface. One method in which the catalytic mechanism can be studied is by using Raman Spectroscopy. However, one drawback of this method is the fact …

Bridging The Molecular/Material Divide: An Investigation Into The Properties Of Polyesters, Terra Marie M. Jouaneh

Senior Honors Projects

By definition, polymers consist of large molecules composed of small, repeating units called monomers. These monomers give characteristic material properties to polymers, whether they be the melting point, the folding character, or the inherent stability. Many of the objects we encounter on a daily basis are composed of polymers. These polymers may be synthetic, such as the plastic in disposable bags, or natural, like glycogen in the liver. Recent developments in biotechnology have used synthetic polymers in drug delivery, contact lenses, and even organ transplants. Polyesters, in particular, have been utilized pharmacologically due to their biodegradable properties. Understandably, not all …

Electrochemical Analysis And Sensing Preface, Yi-Tao Long, Yang Tian

Journal of Electrochemistry

No abstract provided.

Surface-Enhanced Infrared Absorption Spectroscopy- Surface Sensitive In Situ Label-Free Spectroelectrochemistry, Lie Wu, Jian-Long Sun, Xiu-E Jiang

Journal of Electrochemistry

Surface-enhanced infrared absorption spectroscopy (SEIRAS), especially in attenuated total reflectance (ATR) mode, taking advantages of surface-enhancement and near-field optical effect of enhancing substrate, is a ultra-sensitive infrared spectroscopy, which could achieve surface-selected detection at a sub-monolayer level. Since the enhancing substrate could simultaneously serve as a working electrode, ATR-SEIRAS is a readily surface-sensitive in situ label-free spectroelectrochemistry technique. With the advantages of small influence from metal species on enhancement effect, good potential reversibility of spectra, simple surface selection rule and sensitivity to polar molecules, ATR-SEIRAS has been widely applied in the fields of orientation analysis and species identification of interfacial …

High-Efficiency Nitrite Sensor Based On Cop Nanowire Array, Fu-Ling Zhou, Xiao-Li Xiong, Xu-Ping Sun

Journal of Electrochemistry

Nitrite has a negative impact on the environment and human health. The long-term consumption of nitrite-containing foods has a carcinogenic risk. Therefore, the analysis and detection of nitrite are important. It is of great significance to develop high-efficiency electrocatalysts to achieve high sensitivity and selectivity for nitrite detection. The cobalt phosphide nano-array (CoP/TM) was obtained by hydrothermal and low-temperature phosphating. The electrochemical test results show that the constructed CoP/TM was a highly efficient electrochemical reduction nitrite catalyst with the excellent sensing performance and response time less than 3 s, as well as the linear detection range of 1.0 μmol·L^{-1 …}

Preparation And Capacitive Property Of Two-Dimensional Multilayer Ti3C2TX-Mxene/Ppy-Nw Composite Material, Lu Chen, Xuan Jian, Min He, Mi-Mi Zhang, Xiao-Die Chen, Lou-Jun Gao, Zhen-Hai Liang

Journal of Electrochemistry

In this paper, the two-dimensional multilayered Ti₃C₂T_x-MXene was obtained by hydrofluoric acid etching method on the bulk phase material MAX(Ti₃AlC₂) substrate. The two-dimensional multilayered Ti₃C₂T_x-MXene/PPy-NW composite electrode materials were successfully prepared by combining the one-dimensional polypyrrole nanowires (PPy-NW) with two-dimensional multilayered Ti₃C₂T_x-MXene. The morphologies and compositions of the synthetic materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Electrochemical tests showed that Ti₃C_{2 …}

In Situ/Operando Visualization Of Electrode Processes In Lithium-Sulfur Batteries: A Review, Shuang-Yan Lang, Xin-Cheng Hu, Rui Wen, Li-Jun Wan

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries have been regarded as one of the most promising candidates for the next-generation energy storage devices. Fundamental understanding of the structure and evolution processes at electrode-electrolyte interfaces is essential to the further development. In this review, we summarize recent advances in the interfacial observations by means of various in situ/operando visualization techniques, including scanning probe microscopy (SPM), electron microscopy (EM), X-ray microscopy (XRM) and optical microscopy (OM). The real-time investigation provides important evidence for the morphology and component changes including S/Li₂S transformation, polysulfide dissolution on cathodes and Li/solid electrolyte interphase (SEI) evolution on anodes, which …

Advanced Electrochemical Strategy For In Vivo Detection Of Electrochemically Inactive Molecules, Qi Zhou, Li-Min Zhang, Yang Tian

Journal of Electrochemistry

Development of efficient electrochemical strategies for in vivo analysis of electrochemically inactive molecules in brain is significant for understanding and studying their molecular mechanism and roles playing in brain and brain diseases. This review gives a brief introduction on the advanced in vivo electrochemical sensor for detection of non-redox active molecules from three aspects: 1) The selection and design of specific molecules are highly desirable to develop electrochemical sensors with high selectivity for measuring electrochemical inactive molecules through converting specific chemical reaction involved by target to electric signal; 2) The analysis based on ion current rectification occurred at spatial confined …

Recent Progress Of Electrochemiluminescence Sensors Based On Electrically Heated Electrode, Hui-Fang Zhang, Yi-Ting Chen, Fang Luo, Zhen-Yu Lin, Guo-Nan Chen

Journal of Electrochemistry

Electrochemiluminescence (ECL) has broad application in the fields of environmental monitoring and biological analysis due to its intrinsic advantages such as excellent versatility, good detection sensitivity, and high specificity. The intensity of ECL can be influenced by temperature variation in the ECL quantum efficiency and the rate of electrochemical reaction. However, traditional temperature control is commonly realized through bulk solutions heating, which is complicated and unfavorable for detection when the volatile and thermally unstable materials existed. In order to address these problems, electrically heated electrodes are used to adjust the temperature desired. The major character of this technique lies in …