Materials Chemistry Commons^™

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Enhanced Electro-Oxidation Of Methanol At Pt-Au Nanocatalyst For Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

In this investigation, a Pt-Au nanocatalyst prepared by the coelectrodeposition of Pt (PtNPs) and Au (AuNPs) nanoparticles is assembled onto a glassy carbon (GC) electrode for efficient methanol oxidation (MO). Several molar ratios between PtNPs and AuNPs have been used and the corresponding catalytic activity towards MO is tracked. The Pt1:Au1 catalyst showed the highest catalytic activity (5 times higher oxidation peak current (Ip) and a 126 mV negative shift in the onset potential (Eonset) toward MO). The catalyst’s morphology, composition and activity are investigated and the ehancement mechanism is recognized.

A Simple And Effective Way To Overcome Carbon Monoxide Poisoning Of Platinum Surfaces In Direct Formic Acid Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Sohair A. Darwish Ms

Chemical Engineering

A glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs), Pt/MWCNTs-GC, has been introduced for formic acid electro-oxidation (FAO). A similar loading of PtNPs has been conserved for a proper comparison between the Pt/MWCNTs-GC and the unmodified Pt/GC electrodes. The modification with MWCNTs could enhance the loading of PtNPs onto the GC electrode in a way that minimizes its agglomeration and increases its dispersion in the CNTs network. This not only increases the surface area exposed to the reaction but also interrupts the contiguity of the Pt active sites minimizing the adsorption of the poisoning …

Crystallographically Determined Etching And Its Relevance To The Metal-Assisted Catalytic Etching (Mace) Of Silicon Powders, Kurt W. Kolasinski, Bret A. Unger, Alexis T. Ernst, Mark Aindow

Chemistry Faculty Publications

Metal-assisted catalytic etching (MACE) using Ag nanoparticles as catalysts and H2O2 as oxidant has been performed on single-crystal Si wafers, single-crystal electronics grade Si powders, and polycrystalline metallurgical grade Si powders. The temperature dependence of the etch kinetics has been measured over the range 5–37◦C. Etching is found to proceed preferentially in a h001i direction with an activation energy of ∼0.4 eV on substrates with (001), (110), and (111) orientations. A quantitative model to explain the preference for etching in the h001i direction is developed and found to be consistent with the measured activation energies. Etching of metallurgical grade powders …

Increased Utility Of Ph Sensitive Indicators As High Concentration Co2 Detectors Through The Use Of Polyelectrolyte Complexes As Stabilizing Media, Camden James Johnson

All Master's Theses

Development of plastic materials which produce visible color change when exposed to different environments has recently attracted attention for many biomedical applications.^1,2Many biomedical devices are packaged under high concentrations of carbon dioxide (CO₂) which can lower the pH of the packaging environment. This is similar to the CO₂ chemistry responsible for ocean acidification.³ Dye molecules that are sensitive to environmental changes in pH (known as pH indicators) can be encapsulated in plastics and produce a visible color change when a medical device is removed from the sterile CO₂ environment. Plastics made from large …

Nanostructured Materials For Photocatalysis, Water Treatment And Solar Desalination, Hiran D. Kiriarachchi

Theses and Dissertations

Maintaining a constant supply of clean drinking water is among the most pressing global challenges in our time. About one-third of the population is affected by the water scarcity and it can only get worse with climate change, rapid industrialization, and the population growth. Even though nearly 70 percent of the planet is covered by water, the consumable freshwater content is only 2.5 percent of it. Unfortunately, the accessible portion of it is only 1 percent. Even so, most of the freshwater bodies are choked with pollution. Considering the vast availability of saline water on the planet and the increasing …

Diisopropylammonium Bromide Based Two-Dimensional Ferroelectric Monolayer Molecular Crystal With Large In-Plane Spontaneous Polarization, Liang Ma, Yinglu Jia, Stephen Ducharme, Jinlan Wang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

In light of their easy processing, light weight and mechanical flexibility, ferroelectric molecular crystal with large spontaneous polarization (P_s) is highly desired for many advanced applications. Herein, we report the first theoretical study of two-dimensional (2D) ferroelectric molecular crystals via ab initio calculations. Specifically, we show that diisopropylammonium bromide (DIPAB) based 2D ferroelectric monolayer molecular crystal with large in-plane P_s of ∼1.5 × 10⁻⁶ μC cm⁻¹ can be achieved by slicing the bulk DIPAB along a specific plane while keeping the space group unchanged. The important roles of hydrogen bonds are …

Synthesis Of N-Heterocyclic Molecules And Their Applicability Towards Ion Sensing: Polymeric Chemosensors, Aikohi M. Ugboya

College of Graduate Studies: Theses & Dissertations

Critical to biological and environmental processes are anions because often times their relative concentration in our body can be an indicator of one’s well-being. Therefore, highly sensitive and cost-efficient methods for ions recognition is necessary for human health. In recent times, polymeric chemosensors have become a vital tool for sensing ions because of its higher sensitivity and good mechanical properties compared to their monomeric counterparts. These sensors are designed to produce a measurable response in the presence of a targeted ion such as an electrochemical or optical signal. The unique structure and the photophysical properties of the 1,2,3-triazole core coupled …

Oxidative Degradation Of Lignin And Investigation Of Utilization Of Lignin-Derived Materials As Building Blocks For Epoxy Resins, Zhen Fang

Theses and Dissertations--Chemistry

Lignin, the second most abundant biopolymer on earth, is potentially a replaceable source for bulky fuels and chemical feedstocks. There have been numerous reports on methods for the oxidative cleavage of β-O-4 linkages but relatively few reports of how those methods affect other linkages that are present in lignin. We investigated how the β-1 and β-5 linkages respond under oxidative conditions proposed for lignin deconstruction based on their effect on β-O-4 linkages. Mechanochemical treatment of lignin can greatly improve the yield of monomer products and we applied a mechanochemical approach, using powerful ring-and-puck milling to promote lignin degradation. Along with …

Synthesis And Characterization Of Carbonaceous Particles From Xylose And Soybean Residuals, Shanshan Wang

Theses and Dissertations--Chemistry

Carbonaceous materials, especially in micro and nanoscale, are useful in optical, energy storage, electronic, and biomedical devices or technologies. Techniques have been developed for preparation and modification of the carbonaceous materials, while it is still challenging to tailor the properties of carbonaceous materials effectively and economically. Laser is a powerful tool in academic and industrial laboratories, which also plays important roles in the preparation and modification of high-performance carbonaceous nanomaterials.

In this study low-cost hydrothermal synthesis, high-temperature annealing, and Laser ablation (LAL) methods are developed to prepare functionalized carbon nanomaterials and modify their electrochemical and optical properties.

Sub-micro hollow carbon …

Lewis Base Promoted Annulations Of Allenoates With 1,4-Naphthoquinones, Nicole Marie Shoup

Electronic Theses and Dissertations

Lewis base promoted cyclization of allenoates with electron deficient olefins open up the possibility to generate more complex organic structures. By generating more complex molecules, we are able to produce new compounds for biomedical and material applications. Both phosphine and amine Lewis bases offer interesting annulations with allenoates resulting in Lu or Morita–Baylis–Hillman type reactions. Once the Lewis base engages with the allenoate there can be several modes of nucleophilic reactivity that allows for the allenic ester to act as a two or three carbon synthon. The allenoate can then react with varying electron deficient olefins generating more complex molecules …

Modeling The Condensed-Phase Behavior Of Π-Conjugated Polymers, Walker Mask

Theses and Dissertations--Chemistry

It is well established that the morphology and physical properties of an organic semiconducting (OSC) material regulate its electronic properties. However, structure-function relationships remain difficult to describe in polymer-based OSC, which are of particular interest due to their robust mechanical properties. If relationships among the molecular and bulk levels of structure can be found, they can aid in the design of improved materials. To explore and detail important structure-function relationships in polymer-based OSC, this work employs molecular dynamics (MD) simulations to study various π-conjugated polymers in different environments. Two independent investigations are discussed in this work. One investigation examines how …

Nanoscale Building Blocks: Bridging The Gap Between Potential And Realized Applications, Nicole Ritter

Theses and Dissertations (Comprehensive)

The vast potential of nanoparticles and nanotechnology remains largely untapped; the crucial bottleneck being the knowledge gap between making and using nanoparticles (NPs). This PhD work bridges this gap by focusing on synthesizing nanoparticles with applications at the forefront. Four peer-reviewed publications are presented in Chapters 3-6, a safety and toxicological perspective is given in Chapter 7, and current work and future progress are summarized in Appendix 1. Bimorphic silver nanoparticles were prepared, presenting an innovative method to synthesize diverse nanostructures using polymeric surface blocking to break symmetry in seeded regrowth (Chapter 3).¹ Silver stars with D_5h symmetry …

Microstructure Evolution And Electrochemical Properties Of Tio 2 /Ti-35nb-2ta-3zr Micro/Nano-Composites Fabricated By Friction Stir Processing, Hao Gu, Zihao Ding, Zhi Yang, Weiqiang Yu, Wenjie Zhang, Weijie Lu, Lai-Chang Zhang, Kuaishe Wang, Liqiang Wang, Yuan-Fei Fu

Research outputs 2014 to 2021

Forming stable anti-corrosion surface layer and homogenized microstructure on the surface of material has become a major challenge in developing biomedical β titanium alloy. In the study, TiO 2 /Ti-35Nb-2Ta-3Zr anti-corrosion micro/nano-composites with different amount of TiO 2 particles were successfully fabricated by one-pass friction stir processing (FSP). The composition, microstructure and electrochemical properties of the material are characterized systematically. In particular, compact passive oxide films formed on surface of the material after electrochemical corrosion are elaborated from constituent, thickness and structural characteristics. Furthermore, the relationship between various FSP parameters, microstructure presented and corresponding corrosion resistance has been discussed in …

On The Use Of Vibrational Spectroscopy And Scanning Electron Microscopy To Study Phenolic Extractability Of Cooperage Byproducts In Wine, Berta Baca‑Bocanegra, Julio Nogales‑Bueno, Brian Gorey, Francisco José Heredia, Hugh Byrne, José Miguel Hernández‑Hierro

Articles

Wood is an important source of phenolic compounds, which can be transferred to wine during aging process, improving its properties, from an organoleptic point of view. Therefore, understanding and optimizing the extractability of phenolic compounds from wood are crucial in the oenological field. The structural composition of oak wood samples has been evaluated using Raman and attenuated total reflectance Fourier transform infrared (ATR–FTIR) spectroscopies, and their main spectral features have been linked to phenolic compound extractabilities, as measured by classic chemical analyses. To support the analysis, microscopic images of the samples were also recorded using scanning electron microscopy (SEM). The …