Materials Chemistry Commons^™

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan

Journal of Electrochemistry

By using a cost-effective wet process,dense yttria stabilized zirconia (YSZ) films on Ni-YSZ anode substrates have been prepared successfully. The YSZ film was characterized to be around 10 μm in thickness, sufficiently dense, uniform and crack free. A single solid oxide fuel cell fabricated from the supported YSZ film electrolyte on the anode substrate and a LSM cathode prepared on the YSZ film was tested. The power density reached to 0.1 W/cm² at 800 ℃, showing a reasonable performance. Further analysis on both electrodes shows that the anodic overpotential was much larger than IR drop (including YSZ resistance and …

An Eis Study On The Synergetic Filming Between Cathodic Protection And The Corrosion Inhibitor, Yong-Tao Zhao, Jian-Hua Wu, Jian-Hua Qian, Hui Yu

Journal of Electrochemistry

The electrochemical impedance spectroscope (EIS) of 907A steel in seawater was investigated to study the film formation and destruction. The corrosion protection mechanism of the synergy interaction between cathodic protection and YKI-5 corrosion inhibitor (a mixture of polyhydric alcohol phosphate ester, phosphate and polyphosphate) is discused. Typical EIS spectral changes were clearly observed during the film formation and destruction processes. EIS results indicated that the film seemed to formed a multi-layered structure which consist of an inner layer (this may be an inhibitor-metal complex layer) and many outer layers of calcareous deposits. The film possesses of good persistency under the …

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai

Journal of Electrochemistry

An investigation has been made to obtain the glyoxalic acid by the electrochemical oxidation of glyoxal solution with hydrochloric acid under various experimental conditions.The cell used consists of a lead cathode, a DSA anode and a cation-exchange membrane of model CM001. The current efficiency and yield for glyoxalic acid generation were 80.0% and 91.1% respectively, under optimal operating conditions: velocity of electrolyte flow 1.4 m·s^-1 ,current density 450 A·m^-2, temperature 30～40 ℃, initial concentration of glyoxal and hydrochloric acid 9.1%～16.0%, 4%～6%, respectively.

Sol-Gel Ph Sensors And Sol-Gel Metal-Removing Sorbents, Dong Liu

Dissertations and Theses

Sol-gel silica is a porous glasslike material that can be prepared at room temperature. In this work, sol-gel method was employed to develop sol-gel sensors for pH measurement and sol-gel silica sorbents for removal of heavy metals.

Sol-gel pH sensors were prepared by entrapping pH indicators in porous solgel silica films. The feasibility of developing optical pH sensors with linear response over a wide pH range by using mixtures of multiple indicators was demonstrated. Theoretical criteria and experimental procedures for selecting indicators and determining optimum ratios of indicators were discussed. A linear response over 4.5 pH units was obtained for …

3-Hydroxykynurenine And 3-Hydroxyanthranilic Acid Generate Hydrogen Peroxide And Promote Α-Crystallin Cross Linking By Metal Ion Reduction, Lee E. Goldstein, Michael C. Leopold, Xudong Huang, Craig S. Atwood, Aleister J. Saunders, Mariana Hartshorn, James T. Lim, Et Al.

Chemistry Faculty Publications

The kynurenine pathway catabolite 3-hydroxykynurenine (3HK) and redox-active metals such as copper and iron are implicated in cataractogenesis. Here we investigate the reaction of kynurenine pathway catabolites with copper and iron, as well as interactions with the major lenticular structural proteins, the R-crystallins. The o-aminophenol kynurenine catabolites 3HK and 3-hydroxyanthranilic acid (3HAA) reduced Cu(II)>Fe(III) to Cu(I) and Fe(II), respectively, whereas quinolinic acid and the nonphenolic kynurenine catabolites kynurenine and anthranilic acid did not reduce either metal. Both 3HK and 3HAA generated superoxide and hydrogen peroxide in a copper-dependent manner. In addition, 3HK and 3HAA fostered copper-dependent R-crystallin cross-linking. 3HK- …

Structural And Electrical Characterization Of A Novel Mixed Conductor: Ceo2 - Sm2O3 - Zro2 Solid Solution, W. Huang, P. Shuk, M. Greenblatt, M. Croft, Fanglin Chen, M. Liu

Faculty Publications

solid solutions were synthesized for the first time by the hydrothermal method. The electrical properties of the solid solutions have been studied in air and under reducing conditions. Solid solutions with the fluorite structure were formed in all of the studied range of substitution after calcination at 1500°C. With increasing substitution up to 30 mol %, the electronic conductivity increases under a reducing atmosphere. The solid solution has good mixed electronic and ionic conductivity; the total conductivity is 0.42 S/cm at and 700°C with an estimated ionic conductivity of ca. .

Electrodeposition Of Copper On Polished Copper Electrode, Jia Tsung Ling

Student Works (2000-2009)

This project studies the surface morphology of the copper deposit from three different bath solutions on polished copper (3.1 mm in diameter) electrode by using Scanning Electron Microscopy. The behaviour of glycine as an additive in a bath solution containing 0.3 M of copper (II) sulphate and 2.2 M of sulphuric acid was studied by using cyclic voltammetry. In this project, glycine did not involved directly in the reaction of CU²⁺/CU couple but increased the potential and current density of the plating process. However, glycine has the properties for inhibiting the deposition of copper onto the copper disc. Moreover, block …