Materials Chemistry Commons^™

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

Materials for transmuter systems must be able to tolerate high neutron fluxes, great temperatures, and chemical corrosion. For lead bismuth eutectic (LBE) systems, there is an additional challenge in that the corrosive behaviors of materials in LBE are not well understood. Most of the available information on LBE systems has come from the Russians, who have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. The Russians found that the presence of small amounts of oxygen (on the order of parts per million) in the LBE significantly reduced corrosion. However, a fundamental understanding and verification of its …

Surface Studies Of Corrosion Of Stainless Steel By Lead Bismuth Eutectic, Daniel Koury, Brian D. Hosterman, John Farley, Dale L. Perry, D. Parsons, J. Manzerova, Allen L. Johnson

Transmutation Sciences Materials (TRP)

Why is Lead Bismuth Eutectic Important?

• Changing national security stances have led to reexamination of nuclear waste reprocessing

• Dangerous actinides can be separated and

• Transmuted into safer products, creating a waste form dangerous for only hundreds of years, in addition to the production (up to 1/3 of the original fission energy) of useful energy

• Non-moderating coolants or spallation targets for production of fast neutrons is required for transmutation

• Russian experience with LBE coolants in their nuclear submarine fleet makes LBE an attractive possible transmutation coolant technology

• Corrosion of steel by LBE is an important …

Investigation Of The Corrosion Of Steel By Lead-Bismuth Eutectic (Lbe) Using Scanning Electron Microscopy And X-Ray Photoelectron Spectroscopy, Daniel Koury

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lead Bismuth Eutectic (LBE) has been proposed for use in programs for accelerator transmutation of waste. LBE is the leading candidate material as a spallation target and an option for the sub-critical blanket coolant. The corrosion of 316 and 316L stainless steels by LBE has been studied using UNLV's facilities for Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). We have compared exposed and unexposed samples and studied the differences. Some amount of surface contamination is present on the samples and has been removed by ionbeam etching. The unexposed samples reveal typical stainless steel characteristics: a chromium oxide passivation …

Corrosion Of Steel By Lead Bismuth Eutectic: Quarterly Report August September October 2002, John Farley

Transmutation Sciences Materials (TRP)

We continued with sputter depth profiling of 316 and 316L steel samples that have been exposed to LBE. We also calibrated the sputter depth profiling using a sample of SiO₂ on Si, and the SEM. This is a valuable independent determination of the thickness of oxide layers.

In the laboratory, progress continues using the XPS machine. Experiments have been performed on steel samples using Argon ions to mill away the surface of the sample, thereby making measurements as a function of depth. This "ion beam milling" proceeds slowly through the oxide layer that covers the steel sample. We are …

Corrosion Of Steel By Lead Bismuth Eutectic: Quarterly Report For May-June-July 2002, John Farley

Transmutation Sciences Materials (TRP)

The goal of this project is to understand the basic science of corrosion in the steel/LBE system.

We are taking more data, typically using the newly installed X-ray Photoelectron Spectrometry (XPS) apparatus, and analyzing our existing data. Undergraduate students Denise Parsons and Julia Manzerova have helped a great deal in the analysis of the data. We can obtain the elemental composition as a function of position within the sample. This gives clues to the migration of materials, the composition of the protective oxide layer, and the basic science of the corrosion process. We found dramatic differences between the exposed and …

Non-Dipolar Electron Angular Distributions From Fixed-In-Space Molecules, Renaud Guillemin, Oliver Hemmers, Dennis W. Lindle, E. Shigemasa, K. Le Guen, D. Ceolin, C. Miron, N. Leclercq, P. Morin, Marc Simon, P. W. Langhoff

Environmental Studies Faculty Publications

The first indication of nondipole effects in the azimuthal dependence of photoelectron angular distributions emitted from fixed-in-space molecules is demonstrated in N₂. Comparison of the results with angular distributions observed for randomly oriented molecules and theoretical derivations for the nondipole correction first order in photon momentum suggests that higher orders will be needed to describe distributions measured in the molecular frame.

Third Quarter Report, Covering January Through March 2002, John Farley

Transmutation Sciences Materials (TRP)

Progress from June 2001-November 2001 was presented at the winter meeting of the American Nuclear Society in Reno (November 12-15, 2001), and incorporated into a refereed conference proceeding. A copy of the refereed conference proceeding has been provided to Tony Hechanova. In brief, the paper described the new program to examine the corrosive effects of lead-bismuth eutectic (LBE) on steels. We employed various types of surface studies (Scanning Electron Microscope [SEM], and X-ray Photoelectron Spectrometry [XPS]) to examine steel samples that had been exposed to LBE for various lengths of time at various temperatures. The goal is to understand the …

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry, Allen L. Johnson

Transmutation Sciences Materials (TRP)

This research program will analyze various steel samples that have been exposed to LBE as part of the national program to develop LBE and transmutation technologies. This information will be paramount in developing engineering efforts to control, avoid, and/or minimize the effect of corrosion of steels by LBE in transmuter and LBE systems. Additionally, this program provides UNLV researchers with hands-on experience that will be crucial in developing the UNLV LBE program, supporting the University’s mission with the ISTC target complex, and the future development of additional facilities to examine LBE systems.

The research group plans to test the hypothesis …

Corrosion Of Steel By Lead Bismuth Eutectic: Year 1 Annual Report, John Farley

Transmutation Sciences Materials (TRP)

The goal is to investigate the corrosion of stainless steel by lead-bismuth eutectic (LBE), which has been proposed for use as a blanket coolant and a spallation target in the transmuter.

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

We examined stainless samples that were exposed to LBE in experiments conducted by the Russians, under contract to Los Alamos. We examined both corroded and uncorroded samples using the Scanning Electron Microscope (SEM), the Energy Dispersive X-Ray (EDAX) Spectroscopy, and the X-ray Photoelectron Spectrometer (XPS). We found that the surface of the corroded sample is covered by oxygen-containing compounds, presumably mostly iron oxide. In samples exposed for shorter times or lower temperatures, we found that some areas were covered by an oxide layer, and some areas was uncovered. We found that the level of Cr in the uncovered area is …

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

The goal is to achieve a basic understanding of the corrosion of stainless steel by Lead Bismuth Eutectic (LBE), which has been proposed for use in the transmuter as both a coolant and as a sputtering target.

Development Of Solid State Uv Detector Using Commercial Tld And Ln2o3:Re3+ (Ln=Y, La, Gd; Re=Tm, Tb, Eu, Er, Pr), Abdullah Mohd. Noh

Student Works (2000-2009)

Dosimetry of terrestrial ultraviolet (UV) using thermoluminescence (TL) material is an attractive method for a number of reasons. Such as the low cost per phosphor, the possibility to produce them in laboratory with simple facilities, the absence of any associated electronics at the site of measurement and the small size of solid phosphors which can also be used in personal dosimetry. In this research, we are searching for a suitable lanthanide oxide powder and commercial TLD material that can detect solar UV radiation using intrinsic method. The investigated lanthanide oxide powders include Gd₂O₃, La₂O₃ and Y₂O₃ doped with different rare …

The Effect Of Aluminium Oxide And Cerium Oxide As Dispersoids In Chitosan-Lithium Acetate Complexes, Hoi Mien Leow

Student Works (2000-2009)

In this study, chitosan with 85% deacetylation was used with Ni(OAc)₂·2H₂O as doping salt and Al₂O₃, or CeO₂ as dispersoid. They were mixed in certain weight percentages and dissolved in 100ml of 0.5% acetic acid solution. These solutions were poured into petri dishes and left at room temperature for film formation. Infrared Spectroscopy has shown that there is interaction between chitosan and LiOAc with and without dispersoid. The peaks are shifted. broadened. split and differs in intensity. The electrical conductivity of all samples was calculated using the bulk resistance value obtained from the complex admittance plot. The highest electrical conductivity …

Synthesis And Characterization Of Lithiated Mixed Metal Oxides For Lithium Ion Rechargeable Batteries, Seng Gee Tan

Student Works (2000-2009)

Lilhiated mixed metal oxides for lithium ion rechargeable batteries were prepared by the sol gel technique. Samples consisting of lithium acetate, nickel nitrate, cobalt nitrate, manganese acetate and aluminium fluoride were characterised using X-ray Diffraction (XRD), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIRS). Energy Dispersive Analysis of X-rays (EDAX) w1d Cyclic Voltammetry (CV). Thermal characterization shows that the acetates, nitrates and fluorides of precursors material deform at temperature between 50° to 100°C and the products begin to form at a temperature between 264°C to 271°C. FTIR studies show that the materials must be heated for a longer time …

Sulphide Based Materials As Potential Anodes In Lithium Ion Cells, Azlin Sanusi

Student Works (2000-2009)

Sulphides based compounds PbS and SnS have been studied as possible anode material in lithium ion cell. PbS was prepared by the chemical bath deposition technique and SnS by the double decomposition method. Both samples were characterized by the powder X-ray diffraction technique and energy dispersive analysis of X-rays (EDAX). The room temperature electrical conductivity of PbS is 2.6 x 10⁻⁴ S cm⁻¹ and SnS is 5.3 x 10⁻⁷ S cm⁻¹ while at 90°C the electrical conductivity of PbS is 3.3 x 10⁻⁴ S cm⁻¹ and SnS is 2.90 x 10⁻⁶ S cm⁻¹ Cyclic voltammetry determined the potential anode ability …

Orientational Phase Transition In Na_{X}C_{60} (1, T. Yildirim, J. E. Fischer, A. B. Harris, Peter W. Stephens, Dengfa Liu, Laurent Brard, Robert M. Strongin, Amos B. Smith Iii

Chemistry Faculty Publications and Presentations

X-ray diffraction and calorimetry data on cubic Na_xC₆₀(1<x60, e.g., T_m(x=1.3)=325 K. The ordered phases are the same as in pure C₆₀: simple cubic, space group Pa3¯, but the orientations in the disordered phase are more restricted. We explain how Na stabilizes the ordered phase to rather high T, while K and Rb do not, in terms of Coulomb interactions between C₆₀ molecules and and Na ions which we calculate from the local charge density of C₆₀.

Picosecond Laser Pulse Irradiation Of Crystalline Silicon, K. L. Merkle, H. Baumgart, R.H. Uebbing, F. Phillipp

Electrical & Computer Engineering Faculty Publications

Morphology changes introduced by picosecond laser pulses at λ = 532 nm and 355 nm in (111) and (100) silicon samples are studied by means of optical and high-voltage electron microscopy. Depending on energy fluence, orientation and wavelength, amorphous or highly defective regions may be created. From an analysis of damage thresholds and damage depth distributions it is concluded that melting and energy confinement precedes the formation of the structural changes.

Evidence For The Existence Of Two Stable Sites For Cobalt Impurity Atoms In Aluminum, Arun Venkatachar

Dissertations and Theses

Using Fe⁵⁷Mössbauer spectroscopy, two alternative sites occupied by cobalt (10^-4 at. % ) impurity atoms in aluminum have been isolated. The substitutional site A is the stable position after annealing the sample above 840 K, followed by a rapid quench. The impurity atoms in site A are characterized by a single line Mössbauer spectrum (indicative of a cubic environment), a room-temperature f = 0.502 (r. m. s. displ. 0.071 A) and an I. S. (reI. to Fe) = -0.421 mm/sec. For anneals below 770 K the cobalt atoms migrate to site B, which is characterized by a …

Investigation Of The Alpha-Sub-Gamma Phase In Alnico 6, Cortez Samuel

Dissertations and Theses

The purpose of this research project was to study the αᵧ phase in Alnico 6. Other phases were studies for comparison. Also the effect of an applied magnetic field on the formation of the αᵧ phase was investigated.

Three single crystals of Alnico 6 were heat treated for one hour--one at 1250°C, one at 1000°C, and one at 800°C--and water-quenched. The microstructure of each sample was observed with the optical microscope, and X-ray diffraction patterns were taken to determine the crystal structure of the phases present.

Several single crystal samples of Alnico 6 were heat treated at 1000°C and furnace-cooled. …

Properties And Structure Of Some Chalcogenide Glasses, Amin Ismail Amin Abdel-Latif

Archived Theses and Dissertations

No abstract provided.

The Electrical Resistivity Of Different Types Of Glasses, Fadel Youssef Iskandar Assabghy

Archived Theses and Dissertations

No abstract provided.

Investigation Of The Platinum-Rich Portion Of The Platinum-Tantalum Phase Diagram, Bob Dean Browning

Theses and Dissertations

The Pt-Ta binary system was investigated at two isotherms;1000°C and 1500°C, and at eleven alloy compositions in the range of 50 to 100 atomic percent platinum. The alloys were examined by x-ray diffraction and metallography. Three intermetallic compounds, Pt₂Ta, Pt₃Ta, and Pt₄Ta were found to exist in this composition range. The Pt₄Ta intermetallic appeared only at the 1500°C isotherm. Platinum dissolved tantalum substitutionally to 90 atomic percent at 1500 °C and to approximately 80 atomic percent at 1000 °C.