Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 481 - 510 of 598

Full-Text Articles in Materials Chemistry

Investigation, On The Accelerated Dissolution Of Metal Induced By Afm Tip Scratching And Suppressed By Inhibitors, Jun-E Qu, Xing-Peng Guo Aug 2005

Investigation, On The Accelerated Dissolution Of Metal Induced By Afm Tip Scratching And Suppressed By Inhibitors, Jun-E Qu, Xing-Peng Guo

Journal of Electrochemistry

The accelerated dissolution behavior of Cu-Ni alloy induced by AFM tip scratching and the inhibition effect of corrosion inhibitors were investigated. The results showedthat, with a tip loading of 750nN, continuous scan for 30 min in a contact mode on 4×4 μm2 of copper-nickel alloy in 1.5mol/L NaCl and 0.01mol/L HCl could enhance the dissolution of the sample and produced pits on the scratched area. Adding inorganic inhibitors, sodium chromateand organic inhibitor dodecylamine, to the solution suppressed the dissolution of copper-nickel alloyinduced by tip scratching, respectively, by improving the surface passivationperformance of metal surface and forming adsorption films on …

Go to article

Electrocatalytic Oxidation And Degration Of Active Red X-3b By Nanotubes Catalytic Electrodes, Yi Wen, Jian-Hui Fang, Wei-Min Cao, Li-Yi Shi Aug 2005

Electrocatalytic Oxidation And Degration Of Active Red X-3b By Nanotubes Catalytic Electrodes, Yi Wen, Jian-Hui Fang, Wei-Min Cao, Li-Yi Shi

Journal of Electrochemistry

The catalytic splitting decomposition of carbon nanotubes isprocessed by dispersing with dilute nitric acid and thermal oxidation. Then well-proportionedphenolic resin is mixed in the carbon nanotubes. Then, the carbon nanotubesare made into electrodes by hot-press molding after the process of milling with high speed. The surface of the carbon nanotubes electrodes is analyzed by SEM. Active red X-3B simulated waster water is disposed by carbon nanotubes catalyticelectrode (anode) and stainless steel(cathode). The influencing factors of degradation by current density, concentrationof electrolyte, systemtemperature and pH are investigated. The experimental results indicated that acidiccondition is propitious tothe degradationreaction of organicdyestuff and wastewater …

Go to article

Using Electrodeposition To Fabricate Mould For Polymer Microfluidic Chip, Yi Luo, De-Nan Chu, Zhi-Feng Lou, Chong Liu, Li-Ding Wang May 2005

Using Electrodeposition To Fabricate Mould For Polymer Microfluidic Chip, Yi Luo, De-Nan Chu, Zhi-Feng Lou, Chong Liu, Li-Ding Wang

Journal of Electrochemistry

Many researches have been focused on polymer microfluidic chip in recent years and the mould plays an important role in its fabrication process. Using electrodepositingmethod to fabricate a metal mould for polymer microfluidic chip has been presented in this paper. An ultra-thick photoresist SU-8 was coated on a pretreated metal plate, after photolithography, nickel was electrodeposited in the patterned SU-8, then was removed the SU-8 to obtain a final metal mould. This methodreduces workload of electrodeposit largely. Applying counter current before deposit, adding additive to solution and vacuum anneal after demould have been used to improve the binding force between …

Go to article

Preparation, Characterization And Electrochemical Properties Of Nano Tio2-Cnt-Pt On Ti Substrate Complex Electrode, Dao-Bao Chu, De-Xiang Feng, Jin-Hua Zhang, Xiao-Hua Li May 2005

Preparation, Characterization And Electrochemical Properties Of Nano Tio2-Cnt-Pt On Ti Substrate Complex Electrode, Dao-Bao Chu, De-Xiang Feng, Jin-Hua Zhang, Xiao-Hua Li

Journal of Electrochemistry

The nanoTiO2-CNT-Pt on Ti substrate complex electrodes were prepared from precursor of (Ti(OEt)4) directly hydrolyzed and by cyclic voltammograms electroplating method . The XRD and SEM results showed that the nano TiO2 (anatase) particle sizes ranged 5~10 nm and the Pt nanoparticle (average size 9nm) dispersed uniformly on nanoTiO2-CNT film surface. The electrocatalytic activity of Ti/nanoTiO2-CNT-Pt electrode was investigated by cyclic voltammetry and chronopotentiogram. The results indicated that the Ti/nanoTiO2-CNT-Pt electrode exhibited very high electrocatalytic activity and stability for the electro-oxidation of methanol at room temperature. When Pt loading …

Go to article

The Fabrication And Electrochemical Studies On Carbon Nanotube Array Electrodes, Quan-Yong Gao, Jing Zhang, Yong Yang Feb 2005

The Fabrication And Electrochemical Studies On Carbon Nanotube Array Electrodes, Quan-Yong Gao, Jing Zhang, Yong Yang

Journal of Electrochemistry

An improved technique for fabrication of carbon nanotube array electrodes has been proposed in this work. Firstly, carbon nanotubes (CNs) array electrodes were prepared by combsination of Chemical Vapor Decomposition (CVD) method and sputtering techniques in anodized aluminum oxide (AAO) membrane. The CNs/AAO was immersed into HF solution to remove the barrier layer. Controlling the immersing time, the CNs array electrodes with different length contacted with electrolyte can be prepared. The morphology of CNs array electrodes was observed by SEM. The electrochemical properties of CNs array electrodes were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Cyclic voltammetric curves of …

Go to article

The Electrophoretic Deposition Of Nano Hydroxyapatite Coating On Titanium Surface, Fei Chen, Chang-Jian Lin, Zhou-Cheng Wang Feb 2005

The Electrophoretic Deposition Of Nano Hydroxyapatite Coating On Titanium Surface, Fei Chen, Chang-Jian Lin, Zhou-Cheng Wang

Journal of Electrochemistry

A hydroxyapatite coating with nano-structure on the roughened titanium surface was prepared by electrophoretic deposition process. To decrease sintering temperature the HAp nanoparticles synthesizedby a wet chemical method was used. It is observed that the coating is uniform without cracks. After sintering the nano-strueture of HAp coating remains unchanged. The surface treatment of Ti is applied to form a distribution of small pits and TiO2 thin layer that improve the adhesion of coatingto Ti substrate. It is shown that the bonding strength of coating is as high as 18±2.5MPa. The hardness and Young's modulus are 40.6 and 0.42 GPa, …

Go to article

Electrocatalytic Performances Of Carbon Nanotube Air Electrode For Oxygen Reduction, Feng-Ming Zhao, Chun-An Ma Nov 2004

Electrocatalytic Performances Of Carbon Nanotube Air Electrode For Oxygen Reduction, Feng-Ming Zhao, Chun-An Ma

Journal of Electrochemistry

The air electrodes with different mass ratio of Pt/active carbon or carbon nanotube as catalyst layer material have been prepared. The electrocatalytic performances for oxygen reduction were evaluated by means of polarization curve and electrochemical impedance spectroscopy (EIS). The results disclosed that carbon nanotubes dealt with nitric acid in the catalyst layer had been improved obviously on the electrocatalytic activity. After the surface of carbon nanotube was oxygenated and aggraded with platinum, the catalyst had obviously effects on the electrocatalytic activity. The air electrode with the mass ratio of active carbon to Pt/carbon nanotube in 4∶1 showed better electrocatalytic activity, …

Go to article

Chemical Microetching Of Three-Dimensional Gear-Like Pattern On Nickel Surface, Zhu-Fang Liu, Li-Ming Jiang, Jing Tang, Li Zhang, Zhong-Qun Tian, Zhao-Wu Tian, Pin-Kuan Liu, Li-Ning Sun Aug 2004

Chemical Microetching Of Three-Dimensional Gear-Like Pattern On Nickel Surface, Zhu-Fang Liu, Li-Ming Jiang, Jing Tang, Li Zhang, Zhong-Qun Tian, Zhao-Wu Tian, Pin-Kuan Liu, Li-Ning Sun

Journal of Electrochemistry

The chemical micromachining on nickel surface with three-dimensional (3D) gear-like mold was realized by confined etchant layer technique (CELT). By using effective chemical etching and scavenging system (HNO3 +NaOH) and optimizing experimental parameters, such as the etching time, etching current density, concentration of the etchant or and scavenger, we obtained the etched pattern, which is close to negative copy of the mold. The etched micro-pattern characterized by SEM and AFM, demonstrates that CELT can be applied to the 3-D microstructure replication on nickel surface.

Go to article

Lithium Insertion Into Tio2(B) Nanobelts Synthesized By The "Soft Chemical" Method, Cha-Geng Nie, Zheng-Liang Gong, Lan Sun, Juan Zuo, Yue-Kun Lai, Chang-Jian Lin Aug 2004

Lithium Insertion Into Tio2(B) Nanobelts Synthesized By The "Soft Chemical" Method, Cha-Geng Nie, Zheng-Liang Gong, Lan Sun, Juan Zuo, Yue-Kun Lai, Chang-Jian Lin

Journal of Electrochemistry

TiO2(B) Nanobelts were synthesized by using the "Soft chemical"method. The products were characterized by means of transmission electron microscope(TEM), X-ray diffraction(XRD), Raman spectrum and energy dispersive spectrum(EDS). Galvanostatic charging and discharging tests showed that lithium-ion intercalation/deintercalation occurred reversibly in the TiO2(B) nanobelts electrode, and a high capacity (265 mAh·g-1) can be obtained. The results suggested that TiO2(B) Nanobelts might be a promising negative electrode material of second Lithium battery.

Go to article

Electrochemical Lithium Insertion Of Nanosized Tio2, Ying Lan, Jian-Wen Liu, Xue-Ping Gao, Xing-Di Zhou, Jin-Qiu Qu, Feng Wu, De-Ying Song May 2004

Electrochemical Lithium Insertion Of Nanosized Tio2, Ying Lan, Jian-Wen Liu, Xue-Ping Gao, Xing-Di Zhou, Jin-Qiu Qu, Feng Wu, De-Ying Song

Journal of Electrochemistry

The protonic titanate nanotubes with the diameter of 10～15 nm were synthesized via hydrothermal method in NaOH solution and the calcined nanotubes at 500 ℃ were transferred to anatase nanorods with the diameter of 12～20 nm due to dehydration.The electrochemical behavior of the anatase nanorods as lithium insertion materials was examined. The results showed that the nanorod electrode had the high initial discharge capacity of 232 mAh/g and second reversible capacity of 198 mAh/g. The capacity of nanorod electrode maintained 152mAh/g after 20 cycles.

Go to article

Direct Electron Transfer Of Redox Proteins And Enzymes Promoted By Carbon Nanotube, Chen-Xin Cai, Jing Chen May 2004

Direct Electron Transfer Of Redox Proteins And Enzymes Promoted By Carbon Nanotube, Chen-Xin Cai, Jing Chen

Journal of Electrochemistry

The redox proteins (enzymes), such as hemoglobin (Hb), horseradish peroxidase (HRP) and glucose oxidase (GOx) were immobilized on the surface of the carbon nanotube modified with glassy carbon (CNT/GC) electrode, respectively. The experimental results showed that the redox proteins (enzymes) underwent effective and stable direct electron transfer reaction at the surface of CNT/GC electrode with a pair of nearly symmetrical redox peaks in phosphate buffer solution. The formal redox potential, E0' , is almost independent on the scan rates, the average value of E0'  for Hb, HRP and GOx is -0.343±0.001, -0.319±0.002 and -0.456±0.001 V (vs.SCE,pH 6.9), respectively. …

Go to article

Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li May 2004

Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li

Journal of Electrochemistry

The concentrationsof soluble Mn(Ⅲ) species, during the reduction ofelectrolytic MnO2 (EMD) in alkaline solution,have been monitored in situ by UV-visible spectroscopy. The concentration of Mn(Ⅲ) ion in solution changes with discharge time. The first electron discharge process of EMD can be described by three different steps: 1) the reduction of Mn4+ ions on the surface of EMD particles and the structural defect regions within the EMD, 2) the reduction of Mn4+ ions in ramsdellite, 3)the reduction of Mn4+ ions in pyrolusite. During the second electron discharge of EMD, the soluble Mn(Ⅲ) is reduced to Mn(Ⅱ) , …

Go to article

Preparation, Structure And Electrochemical Hydrogenation Of Carbon Nanotubes Supported Platinum Catalysts, Qing-Gang He, Xiao-Zi Yuan, Xian-Xia Yuan, Zi-Feng Ma Feb 2004

Preparation, Structure And Electrochemical Hydrogenation Of Carbon Nanotubes Supported Platinum Catalysts, Qing-Gang He, Xiao-Zi Yuan, Xian-Xia Yuan, Zi-Feng Ma

Journal of Electrochemistry

In this paper, Pt/CNTs catalyst was prepared and its electrocatalytic property was studied by obtaining cycling voltammetry curves (C-V) and Tafel curves. In addition, the XRD,XPS and TEM tests were carried out to determine the structure and composition of the catalysts. It can be found that the platinum loading has been increased significantly using a carbon nanotubes support. Dispersion of Platinum was better and gave more active sites. The electrochemical characteristic of Pt/CNTs was also more desirable than that of Pt/C catalys t(Johnson Matthey). In conclusion, carbon nanotubes can played a conspicuous role in "electrogenerative" processes of PEMFC hydrogenation reactor.

Go to article

Study On The Electrochemical Impedance Spectroscopy (Eis) Of Al-Bronze At Different Anodic Potentials, Hui Yu, Sa-Ying Dong, Hai-Bo Xu, Ming-Xian Sun Feb 2004

Study On The Electrochemical Impedance Spectroscopy (Eis) Of Al-Bronze At Different Anodic Potentials, Hui Yu, Sa-Ying Dong, Hai-Bo Xu, Ming-Xian Sun

Journal of Electrochemistry

The corrosion dissolution mechanism of Al-bronze has been investigated by Electrochemical Impedance Spectroscopy (EIS) at different anodic potentials. In the active region, the corrosion products are complex compounds of cupreous chloride and the diffusion of CuCl2- is the control process of electrochemical reaction. In the transition region, there exhibits two capacitance loops on EIS because CuCl and cupreous oxides films deposit on the electrode surface. In the limiting current region, an inductance loop appears on the EIS because the breakdown of the oxides film leads to serious pit corrosion.

Go to article

Substrates Made By Electrodeposition For Measuring Electrical Properties Of One Dimensional Nanomaterials, Jin-Xuan Liu, Juan Xiang, Zhong-Qun Tian, Bing-Wei Mao Feb 2004

Substrates Made By Electrodeposition For Measuring Electrical Properties Of One Dimensional Nanomaterials, Jin-Xuan Liu, Juan Xiang, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

A method to prepare alternating conducting/insulating substrates by electrodeposition-oxidation was established to facilitate I-E measurements of one-dimensional nanomaterial by CT-AFM. The prepared Au/CuO and HOPG/CuO substrates showed low roughness as well as high uniformity of the alternating conducting/insulating structure, Qualitative I-E measurements were performed on a single carbon nanotube attached to the two above-mentioned substrates, both showing metallic characteristics at room temperature and in air.

Go to article

Template Synthesis Of Highly Ordered Monocrystalline Metal Nanowire Arrays By A Two-Step Ac Electrodeposition, Juan Xiang, Jing-Hua Tian, Zi-Mian Ni, Zhi-Feng Huang, Bo Liu, Zhong-Qun Tian Feb 2004

Template Synthesis Of Highly Ordered Monocrystalline Metal Nanowire Arrays By A Two-Step Ac Electrodeposition, Juan Xiang, Jing-Hua Tian, Zi-Mian Ni, Zhi-Feng Huang, Bo Liu, Zhong-Qun Tian

Journal of Electrochemistry

The monocrystalline metal nanowire arrays were prepared by using a two-step AC electrodeposition in porous anodic aluminum oxide (AAO) template. The growth mechanism of nanowires was discussed. As a result, it has been found that the second voltage pulse has a considerable effect on the pore-filling ratio, the uniformity and the crystal structure, whereas the initial voltage pulse affects only the pore-filling ratio. Using the two-step AC electrodeposition, a highly ordered monocrystalline metal nanowire arrays with a pore-filling ration above 95% can be easily obtained.

Go to article

Formation And Characterization Of Water-Repellent Nano Tio2 Coating And Studying Its Anticorrosion Property, Guang-Xia Shen, Yi-Cong Chen, Chang-Jian Lin Feb 2004

Formation And Characterization Of Water-Repellent Nano Tio2 Coating And Studying Its Anticorrosion Property, Guang-Xia Shen, Yi-Cong Chen, Chang-Jian Lin

Journal of Electrochemistry

Using ethyl acetoacetate (EAcAc) as a chelating agent, ultra fine TiO2 sol is prepared. Nano-TiO2 coatings are deposited on the 316L stainless steel by the dip-coating. Hydrothermal post-treatment leads to crack-free coatings. Meanwhile, the surface struture and properties was optimized. Self-assembly of Hetadecafluorodecyltrimethoxysilane (FSA-13) fabricates hydrophobic layers on the surface of the nano-TiO2 coatings. Particle sizes of TiO2 sol was analysed by zeta pals potential analysis, and surface morphology, structure and properties was characterized by contract angle instrument, XRD, and SEM technologies. The results have shown that the surface of coatings is porous, with approx. 375 …

Go to article

Electrodeposition Nanolaminated Growth Of Zinc, Ying Cao, Tian-Hui Shen, Jing-Yuan Yao, Gui-Fu Ding Feb 2004

Electrodeposition Nanolaminated Growth Of Zinc, Ying Cao, Tian-Hui Shen, Jing-Yuan Yao, Gui-Fu Ding

Journal of Electrochemistry

Nanolaminated growth of the electrodeposition of zinc was studied. The structure and size of crystalline in zinc coatings were investigated by using FEG-TEM and XRD. The corrosion tests of the zinc deposition and the Coatings-Neutral salt spray test were performed, the capability in corrosion resistance of the nanolaminated growth was better than that of others.

Go to article

Study On Electrochemical Behavior Of Sus316l Stainless Steel After Surface Modification, Cheng-Hao Liang, Liang Guo, Wan Chen, Jing-Xiao Liu Nov 2003

Study On Electrochemical Behavior Of Sus316l Stainless Steel After Surface Modification, Cheng-Hao Liang, Liang Guo, Wan Chen, Jing-Xiao Liu

Journal of Electrochemistry

The surface modification for SUS316L stainless steel was carried out by electroplating Rh, ion beam assisted deposition Ta2O5 and sol-gel-derived TiO2. In Tyrode's stimulated body fluid, the surface modified samples had been investigated with electrochemical techniques. The results indicated that the electrochemical stability and dissolution were improved significantly after surface modification. Moreover, as to ion beam assisted deposition Ta2O5 and Sol-gel-derived TiO2 film, the metal's d orbit electron holes filled up by the oxygen electrons made against the adsorption of hydrogen. Thus the cathode process, which is controlled by the hydrogen …

Go to article

Preparation And Characterization Of Y-Type Carbon Nanotubes By Using Anodized Alumina Oxide (Aao) Template, Jing Zhang, Quan-Yong Gao, Yong Yang Nov 2003

Preparation And Characterization Of Y-Type Carbon Nanotubes By Using Anodized Alumina Oxide (Aao) Template, Jing Zhang, Quan-Yong Gao, Yong Yang

Journal of Electrochemistry

In this work, potential-modulation method was used in two-step anodization process to make an AAO template with Y-type nanochannels. Then Y-type carbon nanotubes with controlled length and branch angle were prepared in the template based on chemical vapor decomposion (CVD) method with Co particles as catalyst and C2H2 as carbon source. The Y-type nanotube branches exhibit the angle distribution ranging from 20° to 120°. The results demonstrated that the oxidation potential should be responsible for the angles and length of the branches. Short pulse and high oxidation potential will result in the short and dense nanotube branches.

Go to article

The Study On Carbon Nanotube-Loaded Pt Catalysts For Proton Exchange Membrane Fuel Cells, Hong Zhu, Feng-Juan Ge, Xiao-Hong Kang, Yu-Guo Yang, Yun-Hua Xu Nov 2003

The Study On Carbon Nanotube-Loaded Pt Catalysts For Proton Exchange Membrane Fuel Cells, Hong Zhu, Feng-Juan Ge, Xiao-Hong Kang, Yu-Guo Yang, Yun-Hua Xu

Journal of Electrochemistry

Carbon nanotube-supported-platinum (Pt/CNTs) and carbon-supported-platinum (Pt/C) catalysts were synthesized by in-situ chemical reduction. They were analyzed using TEM and XRD, then made into electrodes to be part of assemable PEMFC for the performence tests. The resulted show that Pt clusters in both catalysts are of small particle size (about 4nm), and Pt/CNTs exhibits a higher catalytic activity than Pt/C.

Go to article

The Current Fluctuations Of Carbon Steel In Nano2-Nacl Solutions, Yu-Ming Tang, Yu Zuo Nov 2003

The Current Fluctuations Of Carbon Steel In Nano2-Nacl Solutions, Yu-Ming Tang, Yu Zuo

Journal of Electrochemistry

The characteristics of current fluctuations of A3 carbon steel in NaNO2-NaCl solutions were studied with potentiostatic and potentiodynamic polarization methods. The steel remained stable passivation in 0.1 mol/L NaNO2 solution without Cl-. After NaCl was added in to the solution, current fluctuations with a characteristic of quick increase and slow decrease occurred, indicating quick dissolution and slow re-passivation of the metastable pits. The metastable pitting may cause accumulated corrosion damage around certain area and result in observable pits. With the increase of chloride concentration, the occurring potential for metastable pits Em rised, and peak values …

Go to article

Fabrication Of Scanning Micro Cl- Probe And In Situ Imaging Of Cl- At The Interface Of 2024 Al Aloy/Solution, Yu-Hua Lin, Min-Hua Shao, Rong-Gang Hu, Yan Li, Rong-Gui Du, Chang-Jian Lin Aug 2003

Fabrication Of Scanning Micro Cl- Probe And In Situ Imaging Of Cl- At The Interface Of 2024 Al Aloy/Solution, Yu-Hua Lin, Min-Hua Shao, Rong-Gang Hu, Yan Li, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

Micro combination Ag/AgCl electrode with a tip measuring tens micron in diameter was fabricated. The probe satisfied in situ imaging of Cl- distribution at metal surface in chloride solution because of its excellent linearity between potential and Cl- concentration, rapid response, good stability and selectivity. With the aid of the home made Micro Electrode Scanning system and scanning Cl- probe, the effect of the [Cl-] at 2024-Al/solution interface on localized corrosion process was investigated. It was demonstated directly that Cl- ion in solution immigrated toward, then adsorbed preferentially and accumulated at the junction between the …

Go to article

Study Of Marine Biocorrosion Using Afm And Molecular Techniques, Herbert H.P.Fang, Lichong Xu, Tong Zhang May 2003

Study Of Marine Biocorrosion Using Afm And Molecular Techniques, Herbert H.P.Fang, Lichong Xu, Tong Zhang

Journal of Electrochemistry

Biofilm is ubiquitous in nature.However,corrosin caused by biofilm is still by and large overlooked. This presentation is to demonstrate the applications of several newly developed analytical techniques in chemisrty and microbiology for the study of marine biocorrosion on steel. AFM(atomic force microscopy) was applied to investigate the initial formation mechanism of biofilm and the degree of corrosion of steel in polluted seawater. DNA/RNA-related molecular techniques were used to analyze the microbial composition corrosive biofilm. Results showed that microbial corrosion began within six days, and the corroded volume in the increased as a power function of time with an index 2.83. …

Go to article

Microstructure And Electrochemical Characteristics Of The Anodic Film Formed On Aluminum Surface, Jeng-Kuei Chang, Chi-Min Liao, Chih-Hsiung Chen, Wen-Ta Tsai May 2003

Microstructure And Electrochemical Characteristics Of The Anodic Film Formed On Aluminum Surface, Jeng-Kuei Chang, Chi-Min Liao, Chih-Hsiung Chen, Wen-Ta Tsai

Journal of Electrochemistry

The thickness, morphology, chemical composition, and crystallinity of the anodized film formed on aluminum were examined in a transmission electron microscope (TEM). Thin foil for TEM analysis was prepared by ultramicrotomy. The relationship between the microstructure and the electrochemical characteristics of the alumina film forming on the pure aluminum was discussed in this investigation. At the forming voltage less than 100V, the anodized films formed at 85 ℃in aqueous ammonium adipate electrolyte was amorphous in nature. Although the film resistance was increased with the forming voltage, its dielectric constant was not changed significantly. As the forming voltage exceeded 100V, crystalline …

Go to article

In Situ Measurements Of Solution Conductivity In Microwave Field, Yong-Qing Su, Chun-Peng Liu Feb 2003

In Situ Measurements Of Solution Conductivity In Microwave Field, Yong-Qing Su, Chun-Peng Liu

Journal of Electrochemistry

The curves of the conductivity as a function of temperature for 24 kinds of solutions have been in situ measured both in the microwave field and in absence of microwave field. The results indicated that the relationship between the conductivity in microwave field (Lw) and temperature (T) can be expressed by an equation Lw=a′+b′T+c′T2 , similar to the one that is valid in absence of the microwave field Ln=a+bT+cT2. Conductivity in the absence and presence of microwave field can be linked by the equation lnLw=A+BLn+CL2n …

Go to article

Study For The Cathodic Behavior Of Active Chlorine On 316l Ss Electrode Surface, Hui Yu, Ming-Xian Sun, Yan Ma, Xiao-Bin Wang Feb 2003

Study For The Cathodic Behavior Of Active Chlorine On 316l Ss Electrode Surface, Hui Yu, Ming-Xian Sun, Yan Ma, Xiao-Bin Wang

Journal of Electrochemistry

The cathodic reducing reactions of active chlorine on 316 L SS electrode surface have been investigated by electrochemical techniques. The open circuit potential shifted positively and the limited diffusion current density increased significantly with the increasing content of active chlorine in the 3.5% sodium chloride solution. The two cathodic reduction processes of HClO and ClO- exhibited on the surface of electrode with the active chlorine added to the 3.5%sodium chloride solution and the corresponding potentials of the two reducing reactions were confirmed. The linear relationship of the mass transport-limited Faradaic current, Id vs. the square root of the angular …

Go to article

Pure Iron Electrolyzed From Scrap Iron Chips And Its Corrosion Characteristics, Wei-Min Cao, Ren-He Yin, Hui-Ceng Yan, Zhi-Qiang Ye Feb 2003

Pure Iron Electrolyzed From Scrap Iron Chips And Its Corrosion Characteristics, Wei-Min Cao, Ren-He Yin, Hui-Ceng Yan, Zhi-Qiang Ye

Journal of Electrochemistry

The high purity electrolytic iron was made from scrap iron chips. Electrolytic conditions of pure iron were determined in chloride baths and the highest purity was 99.983% by chemical analysis. Pure iron had very compact texture and high mechanical strength by SEM figures of cross section. In deaerated 0.5 kmol·m-3 H2SO4 and 0.5 kmol·m-3 NaCl solutions, the corrosion rate of iron decreased with increasing purity.

Go to article

Preparation And Electrochemical Lithium Intercalation Performance Of Different Shaped Carbon Nanotube, Mao-Hui Chen, Zhen-Cai Huang, Guo-Tao Wu, Jin-Kua You, Zu-Geng Lin Nov 2002

Preparation And Electrochemical Lithium Intercalation Performance Of Different Shaped Carbon Nanotube, Mao-Hui Chen, Zhen-Cai Huang, Guo-Tao Wu, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

In the present work, different shaped carbon nanotubes were produced by the general CVD and the template method at different temperature (600 ℃,700 ℃) with the reaction gas of acetylene. The morphology, structure and the electrochemical lithium intercalation performance were comparatively studied and characterized by TEM, HRTEM, SEM, XRD, Raman techniques and Charge/Discharge Test. It was found that the different preparation methods and temperatures all had an obvious effect on these properties of carbon nanotubes. In our samples, with the increase of preparation temperature, the degree of crystallinity decreased, and the reversible specific capacity increased respectively.

Go to article

Nano-Sized Cobalt-Based Oxides As Negative Electrode For Lithium-Ion Batteries, Feng Huang, Zheng-Yong Yuan, Yun-Hong Zhou, Ju-Tang Sun Nov 2002

Nano-Sized Cobalt-Based Oxides As Negative Electrode For Lithium-Ion Batteries, Feng Huang, Zheng-Yong Yuan, Yun-Hong Zhou, Ju-Tang Sun

Journal of Electrochemistry

Nanosized cobalt-based oxide (Co3O4, CoB1.36O2.8 and CoB0.5Al0.1O1.5) samples were prepared by rheological phase method and were tested as anodes in secondary lithium batteries. The cells were cycled between 0.01V and 3.00 V. The best electrochemical performance was obtained from the Co3O4 cell, which retained 95% of its initial capacity (931 mAh/g) after 30 cycles. The doping of B, Al reduced the reversible capacity during the first discharge/charge cycle, and the quantity of reversible capacity reduced with B, Al increasing. The modifying structures at difference …

Go to article

First Prev Next Last