Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 541 - 570 of 2382

Full-Text Articles in Materials Chemistry

Mxenes As Flow Electrodes For Capacitive Deionization Of Wastewater, Naqsh E. Mansoor Aug 2020

Mxenes As Flow Electrodes For Capacitive Deionization Of Wastewater, Naqsh E. Mansoor

Boise State University Theses and Dissertations

The energy-water nexus poses an integrated research challenge, while opening up an opportunity space for the development of energy efficient technologies for water remediation. Capacitive Deionization (CDI) is an upcoming reclamation technology that uses a small applied voltage applied across electrodes to electrophoretically remove dissolved ionic impurities from wastewater streams. Similar to a supercapacitor, the ions are stored in the electric double layer of the electrodes. Reversing the polarity of applied voltage enables recovery of the removed ionic impurities, allowing for recycling and reuse. Simultaneous materials recovery and water reclamation makes CDI energy efficient and resource conservative, with potential to …

Go to article

Investigation Of The Structural, Electronic, And Thermoelectric Properties Of Mono- Chalcogenides, Aida Sheibani Jul 2020

Investigation Of The Structural, Electronic, And Thermoelectric Properties Of Mono- Chalcogenides, Aida Sheibani

Graduate Theses and Dissertations

The structural, electronic, and thermoelectric properties of GeTe are studied using density functional theory and Boltzmann transport equations. This material has a rhombohedral crystal structure in ambient temperature with a ferroelectric behavior due to lack of inversion symmetry. This study suggests that the presence of asymmetry in GeTe can lead to an improvement in the thermoelectric properties of this material. In addition, studies on introducing Group III, IV, and V dopants to GeSe show that while these impurities can improve the power factor and decrease the lattice thermal conductivity, they cannot enhance the figure of merit.

Go to article

Microstructural Characteristics And Mechanical Properties Of Sn-Ag-Cu Solders With Minor Additions Of Al And Zn, Yee Mei Leong Jul 2020

Microstructural Characteristics And Mechanical Properties Of Sn-Ag-Cu Solders With Minor Additions Of Al And Zn, Yee Mei Leong

Student Works (2020-2029)

Driven by the recent trend towards miniaturization of lead free electronic products, researchers are putting immense efforts to improve the properties and reliability of Sn based solders. Recently, much interest has been shown on low silver (Ag) content solder SAC 105 (Sn-1.0Ag-0.5Cu) solder because of economic reasons and improvement of impact resistance as compared to SAC387(Sn-3.8Ag-0.7Ag). The present work investigates the effect of minor (0.1-0.5wt.%) Aluminium (Al) and Zinc (Zn) addition to SAC105 on the bulk and interfacial structure between solder and copper substrate during reflow and after thermal aging , the mechanical properties of the solder joint and the …

Go to article

Synthesis Of Polyurethane Incorporated By Calcium Oxide And Magnesium Oxide For Heavy Metal Removal From Water, Fard Mohsen Vafaei Jul 2020

Synthesis Of Polyurethane Incorporated By Calcium Oxide And Magnesium Oxide For Heavy Metal Removal From Water, Fard Mohsen Vafaei

Student Works (2020-2029)

Water contaminated by heavy metals such as copper, lead, nickel, and cadmium has significant adverse impacts on receiving water. In recent years, various methods, such as adsorption, chemical precipitation, and ion exchange, have been extensively studied for the elimination of heavy metals. Adsorption is one of the numerously and diversely reported mechanisms of removing heavy metals due to its simplicity and costeffectiveness. In this study, highly permeable rigid polyurethanes (PU) incorporating calcium oxide (CaO) (PU/CaO) composite materials were prepared via a facile and economic one-pot synthesis method and characterized for remediation of heavy metal from water. To investigate the effect …

Go to article

Development Of Nano Carbon And Conducting Polymers Based Ternary Composites For Supercapattery, Iqbal Javed Jul 2020

Development Of Nano Carbon And Conducting Polymers Based Ternary Composites For Supercapattery, Iqbal Javed

Student Works (2020-2029)

Although significant efforts have been devoted on the development of energy storage systems such as batteries and fuel cells in the past decades, the low power density, short cyclic life and high maintenance cost have kept them away from many applications. Alternatively, supercapattery which has the characteristic features of batteries as well as supercapacitors has gained much attention because of its rapid charge/discharge mechanism, long life cycle, and high power density. However, supercapattery generally suffers from poor energy density. This research aims to develop carbon and conducting polymers based ternary nanocomposites for high performance supercapattery. Pristine metal oxide nanostructures suffer …

Go to article

Poly(Ethylene Oxide) Based Polymer Electrolytes For All-Solid-State Li-S Batteries, Xue Li, Zheng-Liang Gong Jun 2020

Poly(Ethylene Oxide) Based Polymer Electrolytes For All-Solid-State Li-S Batteries, Xue Li, Zheng-Liang Gong

Journal of Electrochemistry

In recent years, research on lithium-sulfur (Li-S) batteries has received much attention because the sulfur positive electrode and the lithium metal negative electrode produce a high theoretical specific capacity (lithium metal ~ 3800 mAh·g-1, sulfur ~ 1675 mAh·g-1). In addition, sulfur is considered to be the most promising cathode material for secondary lithium batteries, due to its advantages of low price and environmental friendly. However, the practical application of conventional liquid Li-S batteries is still obstructed by several critical issues, such as lithium ploysulfides shuttle effect, long-term stability of lithium metal anode with organic liquid electrolytes, …

Go to article

Synthesis And Raman Study Of Hollow Core-Shell Ni1.2Co0.8P@N-C As An Anode Material For Sodium-Ion Batteries, Jia-Hui Chen, Xiao-Bin Zhong, Chao He, Xiao-Xiao Wang, Qing-Chi Xu, Jian-Feng Li Jun 2020

Synthesis And Raman Study Of Hollow Core-Shell Ni1.2Co0.8P@N-C As An Anode Material For Sodium-Ion Batteries, Jia-Hui Chen, Xiao-Bin Zhong, Chao He, Xiao-Xiao Wang, Qing-Chi Xu, Jian-Feng Li

Journal of Electrochemistry

With the increasing demand for large-scale energy storage, great progress has been made in discovering new advanced energy storage materials. Sodium-ion batteries (SIBs) have attracted much attention in recent years due to their use of abundant sodium resources and their comparable electrochemical capacity to lithium-ion batteries (LIBs). In this paper, we developed novel hollow core-shell Ni-Co bimetallic phosphide nanocubes with N-doped carbon coatings (Ni1.2Co0.8P@N-C) as the anode material for SIBs. The material was synthesized through a low-temperature phosphorization method using resorcinol formaldehyde (RF) resin coating with a Ni-Co Prussian blue analogue (PBA) as a template and …

Go to article

Preparations Of Nano-MnoX/Ti Electrocatalytic Membrane Electrode For Catalytic Oxidation Of Cyclohexane Using Intermittent Electrodeposition, Xue Zhou, Hong Wang, Zhen Yin, Yu-Jun Zhang, Jian-Xin Li Jun 2020

Preparations Of Nano-MnoX/Ti Electrocatalytic Membrane Electrode For Catalytic Oxidation Of Cyclohexane Using Intermittent Electrodeposition, Xue Zhou, Hong Wang, Zhen Yin, Yu-Jun Zhang, Jian-Xin Li

Journal of Electrochemistry

Cyclohexanone and cyclohexanol (KA oil) obtained from highly selective oxidation of cyclohexane (CHA) show important industrial value and application prospects. In this work, the intermittent electrodeposition was developed to prepare nano-MnOx catalyst loading porous tubular titanium membrane electrode (MnOx/Ti), which was employed to constitute an electro-catalytic membrane reactor (ECMR) for the oxidation of cyclohexane to produce cyclohexanol and cyclohexanone. The surface morphology, crystal structure and electrochemical property of the catalysts were characterized by FESEM, XRD and electrochemical workstation, respectively. The results show that the catalyst prepared by the intermittent electrodeposition displayed nano-flower-like γ-MnO2. Compared with …

Go to article

Preparation Of Α-Hydroxylated Acetal From 2-Butanone By Indirect Electrooxidation, Hai-Qing Huang, Ye Miao, Xin-Sheng Zhang Jun 2020

Preparation Of Α-Hydroxylated Acetal From 2-Butanone By Indirect Electrooxidation, Hai-Qing Huang, Ye Miao, Xin-Sheng Zhang

Journal of Electrochemistry

Acetoin (3-hydroxy-2-butanone) is an important food spice. As a platform compound, it is widely used in medicine, tobacco, cosmetics, chemical material and other industries. In this paper, α-hydroxylated acetal, an intermediate of acetoin, was prepared from 2-butanone by indirect electrooxidation in the plate and frame electrolytic cell, in which graphite plates were used as both an anode and a cathode, while KOH as an electrolyte and KI as a catalyst. Acetoin could be prepared by hydrolysis in acidic aqueous solution from acetoin intermediate. The effects of current density, electrolyte flow rate between the plates, 2-butanone concentration and electrolysis temperature …

Go to article

Electrochemical Oxidation Of Metal Chromium In Odium Hydroxide Aqueous Solution, Ping Han, Hai-Tao Feng, Ya-Ping Dong, Sen Tian, Bo Zhang, Wu Li Jun 2020

Electrochemical Oxidation Of Metal Chromium In Odium Hydroxide Aqueous Solution, Ping Han, Hai-Tao Feng, Ya-Ping Dong, Sen Tian, Bo Zhang, Wu Li

Journal of Electrochemistry

Ferrochrome electrolysis technology is a novel method for preparing sodium chromate (Na2CrO4). Although the method performs well at soft reaction conditions, controllable process, environmentally friendly production process, etc., the electrochemical oxidation process of metal chromium in NaOH aqueous electrolyte is still unclear. At present, there are few research articles about specific electrochemical oxidation of metal chromium in NaOH aqueous electrolyte. It is, therefore, meaningful to carry out the research in electrochemical oxidation mechanism of chromium. The electrochemical oxidation of metal chromium in 0.01 mol·L-1 ~ 10 mol·L-1 NaOH aqueous electrolytes at 20 °C was …

Go to article

Electrochemical Response Of A Single Wire-Electrode Ac Probe In 3.5wt.% Nacl, Zhen-Wen Zou, Da-Jiang Zheng, Zi-Ming Wang, Guang-Ling Song Jun 2020

Electrochemical Response Of A Single Wire-Electrode Ac Probe In 3.5wt.% Nacl, Zhen-Wen Zou, Da-Jiang Zheng, Zi-Ming Wang, Guang-Ling Song

Journal of Electrochemistry

In this paper, a recently developed single wire-electrode AC probe technology which does not need a reference or counter electrode was employed to investigate the electrochemical corrosion and sacrificial anode protection behaviors of steel and zinc in 3.5wt.% NaCl. With this simple, fast, reliable and stable probe, the instantaneous corrosion rate and accumulated corrosion loss of carbon steel in 3.5wt.% NaCl were measured, and the results revealed that both were greater than those of zinc. Furthermore, the observed different corrosion behaviors between carbon steel and zinc during the immersion could be caused by their different surface films. With the galvanic …

Go to article

Stability Studies For A Membrane Electrode Assembly Type Co2 Electro-Reduction Electrolytic Cell, Qing Mao, Bing-Yu Li, Wei-Yun Jing, Jian Zhao, Song Liu, Yan-Qiang Huang, Zhao-Long Du Jun 2020

Stability Studies For A Membrane Electrode Assembly Type Co2 Electro-Reduction Electrolytic Cell, Qing Mao, Bing-Yu Li, Wei-Yun Jing, Jian Zhao, Song Liu, Yan-Qiang Huang, Zhao-Long Du

Journal of Electrochemistry

Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO2, which is one of the important techniques to solve the global environmental problems originated from excessive CO2 emission. In this study, a membrane electrode assembly(MEA) type CO2 electro-reduction electrolytic cell was constucted, which enables CO2 feeding and real-time KHCO3 aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO3 concentration and updating inside the liquid electrolytic chamber on CO2 electro-reduction activity, production distribution and stability were investigated. The experimental …

Go to article

Degradation Mechanism Of Lini0.83Co0.12Mn0.05O2 Cycled At 45 ℃, Hong-Yun Ma, Xiao-Hui Yao, Meng-Yao Miao, Yang Yi, Shao-Zhong Wu, Jiang Zhou Jun 2020

Degradation Mechanism Of Lini0.83Co0.12Mn0.05O2 Cycled At 45 ℃, Hong-Yun Ma, Xiao-Hui Yao, Meng-Yao Miao, Yang Yi, Shao-Zhong Wu, Jiang Zhou

Journal of Electrochemistry

Nickel-rich layered material has been considered as the most promising one for lithium ion batteries due to its high specific capacity. To further improve the lifetime performance, it is significant to investigate the degradation mechanisms deeply. In this study, the degradation mechanism of NCM811 (LiNi0.83Co0.12Mn0.05O2) being cycled at 45oC was systematically researched. Electrochemical impedance spectrum (EIS) results showed that the SEI resistance (RSEI) and charge transfer resistance (Rct) went up to 83.41% and 211.34% before and after the NCM811 material being cycled at 45oC, …

Go to article

The Interaction Of Ternary Components Of Ionic Liquid Gel Polymer Electrolytes For Lithium Metal Batteries, Xiao-Na Pan, Li-Lai Liu, Zhi-Pu Wang, Dan Wang, Yun Li, Pei-Xia Yang, Jin-Qiu Zhang, Mao-Zhong An Jun 2020

The Interaction Of Ternary Components Of Ionic Liquid Gel Polymer Electrolytes For Lithium Metal Batteries, Xiao-Na Pan, Li-Lai Liu, Zhi-Pu Wang, Dan Wang, Yun Li, Pei-Xia Yang, Jin-Qiu Zhang, Mao-Zhong An

Journal of Electrochemistry

Ionically conductive gel polymer electrolyte is an excellent candidate due to its inflammable, nonvolatile and high thermal stability as compared to commercial liquid electrolytes which are usually flammable, volatile, and containing toxic organic solution as solvent, The synthesis and application of ionic gel polymer electrolytes in lithium ion/metal batteries have been previously reported. However, the interaction effects of N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13TFSI) ionic liquid (as plasticizer) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) on PVDF-HFP polymer remain unclear. In this work, the molecular structure of ionic liquid gel polymer electrolyte (ILGPE) composed of PP13TFSI, LiTFSI and PVDF-HFP was studied by Raman spectroscopy and Fourier-transform …

Go to article

Ordered Mesoporous Carbon/Graphene/Nickel Foam For Flexible Dopamine Detection With Ultrahigh Sensitivity And Selectivity, Lai-Yu Wang, Xin Xi, Dong-Qing Wu, Xiong-Yu Liu, Wei Ji, Rui-Li Liu Jun 2020

Ordered Mesoporous Carbon/Graphene/Nickel Foam For Flexible Dopamine Detection With Ultrahigh Sensitivity And Selectivity, Lai-Yu Wang, Xin Xi, Dong-Qing Wu, Xiong-Yu Liu, Wei Ji, Rui-Li Liu

Journal of Electrochemistry

Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO2, which is one of the important techniques to solve the global environmental problems originated from excessive CO2 emission. In this study, a membrane electrode assembly(MEA) type CO2 electro-reduction electrolytic cell was constucted, which enables CO2 feeding and real-time KHCO3 aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO3 concentration and updating inside the liquid electrolytic chamber on CO2 electro-reduction activity, production distribution and stability were investigated. The experimental …

Go to article

Pitting Corrosion Of Oerlikon’S Abrasion Resistant Ferritic Stainless Steels, Matthew P. Nalty, Emma Wagstaff Jun 2020

Pitting Corrosion Of Oerlikon’S Abrasion Resistant Ferritic Stainless Steels, Matthew P. Nalty, Emma Wagstaff

Materials Engineering

Existing hardfacing coatings for hydraulic cylinders and brake disc applications crack during use leaving the components susceptible to corrosion. To address this problem, Oerlikon has designed three new alloys to be abrasion and corrosion resistant. This paper reviews the literature necessary to understand and quantify pitting resistance of stainless-steel alloys. It documents one round of testing ASTM G48 method A: Ferric Chloride Pitting Test of Stainless Steels on the new alloys P72-X9, P72-X13, P129-X9, as well as samples of 431, 316, and 2205 stainless steels. This paper also discusses improvements to the G48 testing method and industry use of the …

Go to article

Synthesis And Characterization Of Porous Carbon Composite Derived From Biomass Waste For Supercapacitor Application, Cheng Kim Sim Jun 2020

Synthesis And Characterization Of Porous Carbon Composite Derived From Biomass Waste For Supercapacitor Application, Cheng Kim Sim

Student Works (2020-2029)

Energy storage devices have gradually dominated human daily activities and indispensable to economy development such as supercapacitor and battery. There are few factors determining the performance of supercapacitor and active material is one of the crucial. Therefore, biomass such as pineapple peel (PP) and green waste (GW) were preferred and prior mixed with manganese and tin carbonate to synthesize carbon composite (PP/GW-ZMO and PP/GW-ZTO) via combustion. Brunauer–Emmett–Teller (BET) was employed to study the textural properties with the highest specific surface area obtained in PP-C (1765.92 m2g-1) and GW-C (1613.92 m2g-1). The existence of composite materials was examined using x-ray diffraction …

Go to article

Effect Of Post-Consumer Content And Bioplastic Incorporation On Polymeric Resin In Consumer Applications, Shelby Bicknell May 2020

Effect Of Post-Consumer Content And Bioplastic Incorporation On Polymeric Resin In Consumer Applications, Shelby Bicknell

Electronic Theses & Dissertations

Controversy surrounds the use of plastic products, primarily due to their potentially negative impact on the environment at the end of their lifecycle. The most widely used plastics are manufactured from petrochemicals such as petroleum, coal or natural gas. Petrochemical plastics are not able to readily breakdown in the environment, which aggravates the existing pollution problems. Fortunately, there are eco-friendly alternatives to petrochemical-based plastics. Bioplastics may be derived from renewable sources, biodegradable, or both. Bio-based plastics are plastics that may be derived from renewable biomass sources including, but not limited to, vegetable oils, cornstarch, straw, woodchips, and food waste. They …

Go to article

Enhancement Of Phase Change Material Sorbitol By Nanoparticle Inclusion For Improving Thermal Energy Storage Capabilities, Joshua Kasitz May 2020

Enhancement Of Phase Change Material Sorbitol By Nanoparticle Inclusion For Improving Thermal Energy Storage Capabilities, Joshua Kasitz

Mechanical Engineering Undergraduate Honors Theses

Thermal management of electronic devices has become an increasingly vital field of study with the rapid miniaturization of many key electrical components. With the significant improvement of semiconductor manufacturing and intensified focus on interconnects, electronic devices have decreased in size at an incredible rate. Decreasing spatial requirements is essential to improving device capabilities as the electronic system is able to incorporate more components. Currently, electronic systems are drastically limited by the capabilities of their cooling mechanisms. Smaller devices lead to large increases in the energy density of the system and require more powerful cooling systems to maintain proper component operating …

Go to article

Materials, Micro-Stacks And Related Applications Of Single-Chamber Solid Oxide Fuel Cells, Zhe Lv, Bo Wei, Zhi-Hong Wang, Yan-Ting Tian Apr 2020

Materials, Micro-Stacks And Related Applications Of Single-Chamber Solid Oxide Fuel Cells, Zhe Lv, Bo Wei, Zhi-Hong Wang, Yan-Ting Tian

Journal of Electrochemistry

Single-chamber solid oxide fuel cell (SC-SOFC) is a special type of fuel cells, in which both an anode and a cathode are placed in one chamber. Its working principle relies on the selective catalytic activity of the electrodes towards fuel and oxidant in a gas mixture, leading to the generation of an electromotive force. Because of its unique principle and structure, SC-SOFC has many advantages such as sealing-free, easy stacking, quick start-up and no carbon deposition, thus, it possesses large potential in application. Herein, the principles and characteristics of SC-SOFC are introduced. Furthermore, the SC-SOFC materials, micro-stack design, degeneration mechanisms …

Go to article

Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen Apr 2020

Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen

Journal of Electrochemistry

Cathode material Li2MnO3 has received more and more attention owing to its high theoretical capacity (459 mAh·g -1). However, the low initial coulombic efficiency and the poor cycle stability hamper its practical application in lithium-ion batteries. Herein, we investigated the crystal structure and electrochemical performance of Li2MnO3 by introducing MgF2 coating layer. The results indicated that the conversion of partial layer Li2MnO3 to spinel phase induced by MgF2 coating could reduce the initial irreversible capacity and improve the first cycle efficiency. The initial coulombic efficiencies of the 0.5wt.%, …

Go to article

Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng Apr 2020

Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng

Journal of Electrochemistry

The tantalum ion (Ta 5+) doped garnet-type inorganic solid electrolyte Ta-LLZO was prepared by solid state reaction, and the effect of doping amount on the properties of the materials was investigated. The materials were characterized by X-ray diffraction (XRD), field emission electron scanning microscopy (FESEM) and electrochemical impedance spectroscopy (EIS). And the cycle stability was tested by assembly of LiFePO4//LLZTO//Li all solid lithium battery. The results show that with the increase of Ta 5+ doping amount, the material appeared to form a single cubic phase structure. When the Ta 5+ doping content became 14.09wt.%, x=0.3, the …

Go to article

Recent Advances Of Co2 Electrochemical Reduction In Solid Oxide Electrolysis Cells, Yi-Hang Li, Chang-Rong Xia Apr 2020

Recent Advances Of Co2 Electrochemical Reduction In Solid Oxide Electrolysis Cells, Yi-Hang Li, Chang-Rong Xia

Journal of Electrochemistry

Solid oxide electrolysis cells (SOECs) have stimulated wide interests for their promising application in the reduction of CO2 emissions and the storage of renewable energy. Here, the advances made in the development of cathode materials including cermets and perovskite oxides in our research group, are summarized, along with the design of cell configurations. The electrochemical kinetics and performances of cathodes and cells are discussed and analyzed. It is expected that this brief review offers critical insights and useful guidelines for developing superior electrodes and SOECs in the future.

Go to article

Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang Apr 2020

Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang

Journal of Electrochemistry

A site deficient (La0.8Sr0.2)0.95MnO3 (LSM95) powder was synthesized by solid state reaction as a cathode material. The commercial Zr0.9Sc0.1SO1.95 (SSZ) was selected as an electrolyte material and La0.8Sr0.2Cr0.5Mn0.5O3- (LSCrM) was synthesized by sol-gel method as an anode material. Accordingly, single cells of LSCrM-CeO2|SSZ|3YSZ-LSM95 were prepared by tape casting, sintering and impregnation. The single cell test results for LSCrM-CeO2|SSZ|3YSZ-LSM95 with 0.11 g·cm -2 CeO2 and using CH4 as a fuel showed the power …

Go to article

Direct Carbon Solid Oxide Fuel Cells, Jiang Liu, Xiao-Min Yan Apr 2020

Direct Carbon Solid Oxide Fuel Cells, Jiang Liu, Xiao-Min Yan

Journal of Electrochemistry

Carbon is richly reserved in coal, biomasses, and many other nature resources. It is usually used as an energy source through oxygen oxidation reaction. The oxidation is generally realized through combustion which causes serious air pollution. Besides, the conversion efficiency of generating electricity through the combustion process is limited by Carnot efficiency. A direct carbon solid oxide fuel cell (DC-SOFC) is a solid oxide fuel cell (SOFC) directly operated with solid carbon as the fuel. It can convert the chemical energy of carbon into electricity with high efficiency. The concentration of produced CO2 from a DC-SOFC is so high …

Go to article

Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie Apr 2020

Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie

Journal of Electrochemistry

Solid oxide electrolysers are now attracting much more attentions because they can efficiently produce fuels by electrolyzing H2O/CO2. In this paper, a comprehensive introduction to the recent progress in the development of fuel electrode (cathode) materials is provided. The advantages, disadvantages and development trend towards various cathode materials are pointed out. The key scientific and technological problems in this field are emphasized.

Go to article

Development Status And Prospects Of Hydrogen Production By High Temperature Solid Oxide Electrolysis, Wen-Qiang Zhang, Bo Yu Apr 2020

Development Status And Prospects Of Hydrogen Production By High Temperature Solid Oxide Electrolysis, Wen-Qiang Zhang, Bo Yu

Journal of Electrochemistry

Solid oxide electrolysis cell is an advanced energy conversion device with high efficiency, simplicity, flexibility, and environmental friendliness. It is currently a research hotspot in the international energy field. This paper introduces and analyzes the basic principles, key materials, system components and developments of solid oxidation electrolysis cells. Furthermore, the recent research progresses, challenges and future development directions in solid oxidation electrolysis cells in the field of high-efficiency hydrogen production are summarized and outlined.

Go to article

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan Apr 2020

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan

Journal of Electrochemistry

For pervasive applications of fuel cells, highly efficient and economical materials are required to replace Pt-based catalysts for oxygen reduction reaction (ORR). In this study, the NiO@rGO, Pd-NiO@rGO and Ag-NiO@rGO nanoparticles were synthesized, and their catalytic performances toward ORR were investigated. The results revealed that all the three materials were capable of catalyzing ORR, but both the Pd-NiO@rGO and Ag-NiO@rGO showed the better performances compared with the NiO@rGO in terms of the reaction pathway being 4-electron process, the increases of the onset potential and the intermediate yielding rate, as well as the extended stability. Moreover, the effect of Pd modification …

Go to article

Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu Apr 2020

Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a generating device by electrochemical reaction to transfer the chemical energy of fossil fuels (coal, oil and gas, etc.), the biomass fuel or other hydrocarbon fuels directly into electricity with higher energy conversion efficiency and lower pollution, which is recognized to be efficient green energy technology in the 21st century. However, when hydrocarbons are directly used as fuel, carbon deposition is easy to occur in nickel-based anode, thus, losing electrochemical catalytic activity. Fuel pre-reforming on the outside of the anode is an effective solution, which strongly relies on highly efficient and stable reforming catalysts. …

Go to article

Research Progress In Ethane Dehydrogenation To Cogenerate Power And Value-Added Chemicals In Solid Oxide Fuel Cells, Yun Fan, Qi Wang, Jun Li, Jing-Li Luo, Xian-Zhu Fu Apr 2020

Research Progress In Ethane Dehydrogenation To Cogenerate Power And Value-Added Chemicals In Solid Oxide Fuel Cells, Yun Fan, Qi Wang, Jun Li, Jing-Li Luo, Xian-Zhu Fu

Journal of Electrochemistry

Increasing supplies of methane/shale gas have promoted global development of higher value chemicals such as ethylene production by ethane, which dramatically changes the markets of petrochemical industry. Clean and efficient transformation of ethane into higher value chemicals has far-reaching significance. Ethylene production through ethane steam cracking is a relatively matured technology for industrial production. However, the process consumes large amounts of energy and the presence of carbon deposition becomes a serious problem which is difficult to be solved. The cogenerated energy-chemicals solid oxide fuel cells have been widely studied because fuel gas can be converted into high-value chemicals via spontaneous …

Go to article

First Prev Next Last