Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1651 - 1680 of 2382

Full-Text Articles in Materials Chemistry

Corrosion Behavior Of The Welding Seam Of The Q235 Steel Jointed By J420 Electrode In Ammonium Sulfite Solution, A-Li Lei, Qiao-Qin Guo, La-Jun Feng May 2006

Corrosion Behavior Of The Welding Seam Of The Q235 Steel Jointed By J420 Electrode In Ammonium Sulfite Solution, A-Li Lei, Qiao-Qin Guo, La-Jun Feng

Journal of Electrochemistry

The corrosion behavior of welding seam of the Q235 steel jointed by J420 electrode in ammonium sulfite solution was researched.The results of electrochemical method of welding seam and metallurgical structure analysis showed that the poor corrosion resisting property was determined by its structure after the Q235 steel was jointed by J420 electrode.The sulfite corrosion rate was accelerated by increasing the temperature and concentration of ammorium.

Go to article

Preparation Of Spherical Ni(Oh)2 Coated With Coooh And Its Fast Charge Performance, Min-Jie Yang, Jun-Min Nan, Jian-Jun Xue, Yan Cui, Ming Cui May 2006

Preparation Of Spherical Ni(Oh)2 Coated With Coooh And Its Fast Charge Performance, Min-Jie Yang, Jun-Min Nan, Jian-Jun Xue, Yan Cui, Ming Cui

Journal of Electrochemistry

Spherical Ni(OH)2 was coated with CoOOH through chemical precipitation and electrolytic oxidation.The influences of CoOOH coating on fast charge performance ofMH/Ni battery were studied by preparing high capacity and fast charge AA size MH/Ni batteries.The sample coated with CoOOH was characterized by Infrared spectrum(IR) and scanning electron microscopy(SEM).The results showed that the internal resistance decreased 3.4 mΩ,the charge plateau lower and the cell temperrature was below 55 ℃ at the end of charging process when the cathode active material used Ni(OH)2 coated with CoOOH as compared with that doped by CoO.In addition,an initial discharge efficiency of 90.6% and …

Go to article

Effect Of Preparation Conditions On Electroluminescence Of Porous Silicon, Ya-Jun Yang, Qing-Shan Li, Xian-Yun Liu, Ning Zhang, Bo Zhao, Xue-Gang Zheng, Ming-Ji Shi, Da Chen, Jing-Jing Wang May 2006

Effect Of Preparation Conditions On Electroluminescence Of Porous Silicon, Ya-Jun Yang, Qing-Shan Li, Xian-Yun Liu, Ning Zhang, Bo Zhao, Xue-Gang Zheng, Ming-Ji Shi, Da Chen, Jing-Jing Wang

Journal of Electrochemistry

Electrically induced visible light emitting porous silicon devices with the structure of ITO/PS/p-Si/Al were fabricated by evaporation-anodic oxidation method.The light emission last for a few hours under 7.5V forward bias conditions.It was shown that the electroluminescence(EL) peaks shifted to the blue with the increasing of current density,erosion time and solution concentration.In order to achieve samples with low driven voltage,long light emission time and high EL efficiency,porous silicon should be prepared under low current density and short erosion time.

Go to article

Electrochemical Impedance Spectrum Of Ferrocene At A Rotating Disk Glassy Carbon Electrode And Its Interaction With Dna, Can-Hui Chen, Hong Li, Jian-Zhang Zhou, Zhong-Hua Lin, Wei Zhu, Quan-Xin Zhang May 2006

Electrochemical Impedance Spectrum Of Ferrocene At A Rotating Disk Glassy Carbon Electrode And Its Interaction With Dna, Can-Hui Chen, Hong Li, Jian-Zhang Zhou, Zhong-Hua Lin, Wei Zhu, Quan-Xin Zhang

Journal of Electrochemistry

The electrochemical impedance spectrum(EIS) of ferrocene(Fc) at a rotating glassy carbon(GC) electrode and its interaction with calf thymus DNA in Tris-NaCl buffer solution(pH=7.2) have been investigated by using electrochemical techniques such as rotating disk electrode(RDE),EIS and its data fitting.A plateau of the limiting current for the voltammetric curve and two capacitance arches obtained at the rotating GC electrode are exhibited.The interaction of Fc with DNA is represented by the decrease of limiting diffusion current and the increase of electrochemical reaction resistances with the increase of DNA concentration,respectively.On the other hand,based on the theoretical analysis and data fitting of RDE and …

Go to article

Structure And Properties Of Electrodeposited Sn-Co Alloy Electrodes As Anode Material For Lithium-Ion Secondary Batteries, Hong-Hong Jiang, Ling Huang, Shun-Wei Zhou, Fu-Sheng Ke, Fang-Zu Yang, Xiao-Yong Fan, Shi-Gang Sun May 2006

Structure And Properties Of Electrodeposited Sn-Co Alloy Electrodes As Anode Material For Lithium-Ion Secondary Batteries, Hong-Hong Jiang, Ling Huang, Shun-Wei Zhou, Fu-Sheng Ke, Fang-Zu Yang, Xiao-Yong Fan, Shi-Gang Sun

Journal of Electrochemistry

The Sn-Co alloy deposits were prepared by electroplating.The structure and electrochemical performance of the electroplated Sn-Co alloys have been investigated in detail. Experimental results show that the porous Sn-Co alloy film exhibits hexagonal solid solution,with Sn as the solvent, Co as the solute. The texture of the Sn-Co alloy coating exhibits(110) preferred orientation. Electrochemical tests show that the porous Sn-Co alloy coating electrodes can deliver a discharge capacity of 643mAh/g in the first cycle. At the 20h cycle the charge was 461mAh/g. At initial charge curve the irreversible capacity is probably associated to a combination of processes, which may …

Go to article

High Density Lifepo4/C Synthesized By Controlled Crystallization And Microwave Carbon Thermal Reduction, Chang-Ping Tang, Jie-Rong Ying, Min Lei, Wei Li, Chang-Yin Jiang, Chun-Rong Wan May 2006

High Density Lifepo4/C Synthesized By Controlled Crystallization And Microwave Carbon Thermal Reduction, Chang-Ping Tang, Jie-Rong Ying, Min Lei, Wei Li, Chang-Yin Jiang, Chun-Rong Wan

Journal of Electrochemistry

The spherical FePO4·xH2O was prepared in the solution by controlled crystallization.The precursor FePO4 was obtained in high temperatureceramic approach,then the high density LiFePO4 /C was synthesized by microwave carbon thermal reduction.The structure and morphology of the materials were characterized by means of XRD and SEM techniques,and the electrochemical properties were studies by charge-discharge experiments.

Go to article

Effect Of Cracks On Corrosion Of Rebar In Concrete Studied By Wire Beam Electrode, Guo-Xi Li, Xian-Lu Hou, Ri-Long Zhu, Jin-Feng Hu, Yan-Na Du May 2006

Effect Of Cracks On Corrosion Of Rebar In Concrete Studied By Wire Beam Electrode, Guo-Xi Li, Xian-Lu Hou, Ri-Long Zhu, Jin-Feng Hu, Yan-Na Du

Journal of Electrochemistry

The effects of crack and ethanolamine on corrosion of rebar in concrete were studied by measuring the distribution of corrosion potential and polarization resistance of iron wires in 10% NaCl solution.The results showed that the diffusion of water,oxygen and chloric ion toward concrete was accelerated by the crack which intensified the nonuniform corrosion of iron wire with the regions near to crack as anode and the uncracked regions as cathode.Ethanolamine could diffuse into the body of concrete and absorb on the surface of iron wire,which reduced iron corrosion evidently and successfully inhibited the nonuniform corrosion caused by crack without changing …

Go to article

Tyrosinase Immobilizarion On Boron-Doped Diamond Electrodes And The Determination Of Phenolic Compounds, Yan-Li Zhou, Jin-Fang Zhi May 2006

Tyrosinase Immobilizarion On Boron-Doped Diamond Electrodes And The Determination Of Phenolic Compounds, Yan-Li Zhou, Jin-Fang Zhi

Journal of Electrochemistry

As-grown BDD surfaces were first functionalized by photochemically linking vinyl groups of allylamine,producing covalently linked amine-terminated active BDD surfaces.Then the tyrosinase was immobilized onto the BDD surface through peptide linking.Cyclic voltammograms of phenol,pcresol and hydroquinone were measured using the tyrosinase-modified BDD electrode and amperometric characteristics such as sensitivity,linear response range and stability were studied.

Go to article

Electrochemical Studies On Electrocatalytic Activity Of AuCore PtShell Nanoparticles To Methanol Oxidation, Fang Bao, Jian-Lin Yao, Ren-Ao Gu May 2006

Electrochemical Studies On Electrocatalytic Activity Of AuCore PtShell Nanoparticles To Methanol Oxidation, Fang Bao, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

AucorePtshell nanoparticles with different thicknesses were prepared by using chemical reduction method,and characterized by ultraviolet-visible spectroscopy(UV-Vis),transmission electron microscopy(TEM) and cyclic voltammetry(CV).The electrocatalytic activity of AucorePtshell nanoparticles with the mean diameter of 70~80 nm to methanol oxidation was investigated by cyclic voltammetry in the acid solution.The results revealed that the prepared core-shell nanoparticles were covered by Pt shell and exhibited the similar optical property and electrocatalytic activity with the normal Pt surface.Moreover,the electrocatalytic activity increased with the electrochemical sweep in the certain potential range.It might be contributed by the special loose structure of Pt shell …

Go to article

Electrochemical Preparation Of Gd-Ni Alloy Film In Acetamide-Urea-Nabr Melt, Bi-Qing Chen, Jian-Chao Wang, Chen-Yu Guo, Jin-Gui Wang, Qing Liu May 2006

Electrochemical Preparation Of Gd-Ni Alloy Film In Acetamide-Urea-Nabr Melt, Bi-Qing Chen, Jian-Chao Wang, Chen-Yu Guo, Jin-Gui Wang, Qing Liu

Journal of Electrochemistry

Cyclic voltammetry was used to study the electroreduction of Ni2+ to Ni on Pt and Cu electrode in acetamide-urea-NaBr melt at 353K.It is irreversible in one step.At Pt and Cu eletrode the diffusion coefficient and electron transfer coefficient of Ni2+ in 0.063mol/dm3) NiCl2-acetamide-urea-NaBr melt were determined.The transfer coefficient α=0.28 and diffusion coefficient D_(0)=4.63×10-5 cm2·s-1 of the Pt eletrode and transfer coefficient α=0.22 and diffusion coefficient D_(0)=6.05×10-7 cm2·s-1 of the Cu eletrode were measured.It was put emphasis on that Gd3+ is not reduced to Gd alone …

Go to article

Study On Composite Organic Inhibitor Of Zinc Electrode In Alkaline Solutions, Xue-Tao Bu, Guang-Chuan Liang, Cui Li May 2006

Study On Composite Organic Inhibitor Of Zinc Electrode In Alkaline Solutions, Xue-Tao Bu, Guang-Chuan Liang, Cui Li

Journal of Electrochemistry

The synergetic influence of sodium dodecyl benzene sulfonate(SDBS) with Tween-20(Tween) on zinc electrode was studied by polarization experiment,surface tension test,discharge test and SEM.It is found that the composite inhibitor ST has a much higher efficiency.The addition of Tween reduced the critical micell concentration of SDBS on zinc electrode remarkably and the distribution of adsorption became more homogeneous.ST inhibits corrosion of zinc electrode and improves discharge capacity of the whole battery.Through electrochemical morphological observation of anodic passivation behaviors of zinc electrode,the absorption of ST on electrode surface makes discharged production much smaller and keeps crude porous structure intact.Passivation of zinc electrode …

Go to article

Electroless Nickel Plating On Carbon Nanotube With Non-Palladium Activation Procedure, Guang-Hui Hu, Hui-Huang Wu, Fang-Zu Yang Feb 2006

Electroless Nickel Plating On Carbon Nanotube With Non-Palladium Activation Procedure, Guang-Hui Hu, Hui-Huang Wu, Fang-Zu Yang

Journal of Electrochemistry

A new procedure of surface activation without using palladium salt was proposed for electroless nickel plating on carbon nanotubes.In the procedure,carbon nanotubes were oxidized by nitric acid and then neutralized with NaOH to create carboxyl surface groups which were used to adsorb Ni2+ ions,thereafter the adsorbed Ni2+ ions were chemically reduced into Ni nano-particles as a catalytic center for electroless nickel deposition,all these were further confirmed by infrared absorption spectra and electron microscopic observations.The results indicate that the procedure is feasible to electroless nickel plating on carbon nanotubes.The different morphology of deposits obtained from electroless plating was also …

Go to article

Conductivity Of Comb Polyether Pure Solid Polymer Electrolyte, Lin Ye, Peng Gao, Zeng-Guo Feng, Feng Wu, Shi Chen, Guo-Qing Wang Feb 2006

Conductivity Of Comb Polyether Pure Solid Polymer Electrolyte, Lin Ye, Peng Gao, Zeng-Guo Feng, Feng Wu, Shi Chen, Guo-Qing Wang

Journal of Electrochemistry

A comb polymer was synthesized through cationic ring-opening polymerization starting from a monomer 3-hydroxymethyl-3-methyl-oxetane.The ion conductivity was measured by CHI660A electrochemical station under various lithium salt concentrations and various temperatures.The highest ion conductivity was recorded to be 10-4.43 S/cm at room temperature and 10-3.44 S/cm at 80 ℃.DSC results showed that the segment moves more difficultly with the increasing of lithium salts concentration.XPS found the existence of aggregating lithium ions in POE5 and POE10,and it suggested that POE20 had a suitable lithium concentration for polymer electrolyte.

Go to article

Studies On Pva-Cmc-Koh-H2O Alkaline Polymer Electrolytes, An-Bao Yuan, Jun Zhao Feb 2006

Studies On Pva-Cmc-Koh-H2O Alkaline Polymer Electrolytes, An-Bao Yuan, Jun Zhao

Journal of Electrochemistry

A given amount of sodium carboxymethyl cellulose(CMC)was added to PVA complex and thus the PVA-CMC-KOH-H2O alkaline polymer electrolyte with this modification was prepared.The properties of the polymer electrolyte films were characterized by AC impedance,cyclic voltammetry,differential thermal analysis and infrared spectroscopic analysis methods.The polymer electrolyte exhibited a high ionic conductivity,typically 10-2S·cm-1 with an electrochemical stability window of about 1.6 V on stainless steel blocking electrodes.The influence of the film composition such as KOH,H2O and CMC on ion conductivity was investigated.In addition,a preliminary study was carried out on the polymer electrolyte for Ni/MH battery.It was …

Go to article

Anodic Behaviors Of Pb-Ca-Sn-Re Alloy And Tradditional Pb-Ca-Sn Alloy In Sulfuric Acid Solutions, Dang-Guo Li, Gen-Shu Zhou, Liang Yao, Guan-Fa Lin, Mao-Sheng Zheng Feb 2006

Anodic Behaviors Of Pb-Ca-Sn-Re Alloy And Tradditional Pb-Ca-Sn Alloy In Sulfuric Acid Solutions, Dang-Guo Li, Gen-Shu Zhou, Liang Yao, Guan-Fa Lin, Mao-Sheng Zheng

Journal of Electrochemistry

The anodic behaviors of Pb-Ca-Sn-Re and Pb-Ca-Sn alloys were investigated at 1.28 V(vsHg/(H2SO4)) in 4.5 mol/L sulfuric acid solution by means of ac voltammetry,ac impedance and cyclic voltammetry.The results showed that the corrosion-resistance property of Pb-Ca-Sn-Re alloy is better than that of tradditional Pb-Ca-Sn alloy,the growth of Pb(Ⅱ) compounds was inhibited in the film of Pb-Ca-Sn-Re alloy,and the film impedance of Pb-Ca-Sn-Re alloy was decreased,indicating that the conductivity of the film was(increased),which is helpful to enhance the deep recycling property for lead acid battery.

Go to article

Mechanism Of Self Discharge Performance Improvement In The Ni-Mh Batteries With Naoh Electrolyte, Xiao-Feng Li, Tong-Chi Xia, Hui-Chao Dong, Yan-Wei Wei Feb 2006

Mechanism Of Self Discharge Performance Improvement In The Ni-Mh Batteries With Naoh Electrolyte, Xiao-Feng Li, Tong-Chi Xia, Hui-Chao Dong, Yan-Wei Wei

Journal of Electrochemistry

The self-discharge performance and charge efficiency at 60 ℃ for Ni-MH battery can be markedly enhanced by using NaOH electrolyte instead of KOH electrolyte.Both the results of electrochemical impedance spectroscopy and cyclic voltammetry tests indicate that the separation of H2 from the negative electrode may be partly blocked in the former because of the change of the adsorption/desorption behavior of H on the surface of the negative electrode,thus results in an improvement of self-discharge performance of the battery.

Go to article

2006 National Conference On Corrosion Electrochemistry And Measuring Methods, Editorial Office Of J.Electrochem. Feb 2006

2006 National Conference On Corrosion Electrochemistry And Measuring Methods, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Go to article

Preparation Of Spinel Limn2O4 Cathode Materials For Li-Ion Batteries Based On Sol-Gel Process, Xiang-Ming He, Li Wang, Guo-Yun Zhang, Chang-Yin Jiang, Chun-Rong Wan Feb 2006

Preparation Of Spinel Limn2O4 Cathode Materials For Li-Ion Batteries Based On Sol-Gel Process, Xiang-Ming He, Li Wang, Guo-Yun Zhang, Chang-Yin Jiang, Chun-Rong Wan

Journal of Electrochemistry

Spinel LiMn2O4 was prepared from CH3COOLi·2H2O,Mn(CH3COO)2 and adipic acid based on sol-gel process.XRD analysis showed that when the sintering temperature increased,the crystallinity increased,and the capacity also increased.However,its cycleability reached a maximum value at 750 ℃.The sintering duration also influenced on the capacity.The optimized performance was obtained when the sintering was carried out at 750 ℃ for 20 h.Under these conditions,as-prepared spinel LiMn2O4  presented the initial discharge capacity of 130 mAh·g-1 and 125 mAh·g-1 at 15th cycle.

Go to article

Electrochemistry And Structures Of Silicon Surface, Gregory X.Zhang Feb 2006

Electrochemistry And Structures Of Silicon Surface, Gregory X.Zhang

Journal of Electrochemistry

Accurate control and fabrication of silicon surface structures from atomic scale to micrometer scale,which may be randomly associated with surface roughness or have well defined patterns,is critical for the per-formance and reliability of electronic devices.Electrochemical reactions of silicon in solutions involved in wetcleaning and etching of silicon wafer play an importantrole in determining the structures of silicon surface.Atre-mendous amount of researches have been done in the last several decades to understand and control a range ofcomplex electrochemical reactions at silicon/solution interface and their relations to the resulted surface struc-tures.The findings generated from these research efforts have been compiled and integrated …

Go to article

Electrocatalytic Oxidation Of Glucose On Nano Pt/C Electrode, Cui-Lian Chen, Xiao-Lan Wei, Pei Kang Shen Feb 2006

Electrocatalytic Oxidation Of Glucose On Nano Pt/C Electrode, Cui-Lian Chen, Xiao-Lan Wei, Pei Kang Shen

Journal of Electrochemistry

Nano Pt/C electrocatalysts were prepared by intermittent microwave heating method.The electrooxidation of glucose on smooth Pt and～Pt/C electrodes has been studied and compared.The results showed that the electrochemical properties on nano Pt/C were improved due to the reduction of the overpotential and the increase in the kinetic rate.The surface area would be significantly increased when the particle size of the catalyst was reduced to nano-scale,resulting in the increase in the activity.The enhancement in the resistance to poisoning could be explained that the oxygen-containing species are easier to react with poisoning species on nano Pt/C and re-active the electrode.

Go to article

Effects Of Sulfide Ions On The Inhibiting Efficiency Of Eda As A Copper Corrosion Inhibitor In Dilute Hcl Solution, Wen-Juan Qu, Rong-Gui Du, Chang-Jian Lin Feb 2006

Effects Of Sulfide Ions On The Inhibiting Efficiency Of Eda As A Copper Corrosion Inhibitor In Dilute Hcl Solution, Wen-Juan Qu, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

The anticorrosion action of EDA on copper in dilute HCl solution and the effect of sulfide ions on the inhibiting efficiency were studied by the Tafel plot method.The corrosion potential of Cu shifted to more positive value and the corrosion current density decreased after the addition of Na2S to the solution.The results indicated that sulphide ions could increase the inhibiting efficiency of EDA because of the synergistic inhibition effect between EDA and Na2S,resulting from the adsorption of HS- on the surface of Cu,facilitated the adsorption of EDA to form a highly protective adsorbed layer which …

Go to article

The Complex Of Pasp And Tungstate As Inhibitors Of Cupronickel B10′S Corrosion In 3% Nacl Solution, Qun-Jie Xu, Guo-Ding Zhou, Hui-Feng Wang, Wen-Bin Cai Feb 2006

The Complex Of Pasp And Tungstate As Inhibitors Of Cupronickel B10′S Corrosion In 3% Nacl Solution, Qun-Jie Xu, Guo-Ding Zhou, Hui-Feng Wang, Wen-Bin Cai

Journal of Electrochemistry

AC impedance and polarization curve measurements were conducted to study the effects of environ-ment-friendly inhibitors PASP,Na2WO4 and their complexes on the corrosion of cupronickel B10 in 3%NaCl solution.The results indicate that PASP or Na2WO4 alone does inhibit the corrosion of B10,and most effectiveconcentrations are 40 mg/L and 60 mg/L for PASP and Na2WO4,respectively.With the total concentration of 40mg/L for the complex inhibitors,the optimum complex ratio of PASP to Na2WO4 was 3:1.The complex of such a combination showed a significantly synergetic inhibition effect on the corrosion of B10.

Go to article

The Effect Of Solution Concentration On Properties Of Ru-Ti-Ir Oxide Anode Coatings, Ke Wang, Yan Han, Jun-Tao Wang, Xiao-Ling Zhang, Yu-Pu Sun Feb 2006

The Effect Of Solution Concentration On Properties Of Ru-Ti-Ir Oxide Anode Coatings, Ke Wang, Yan Han, Jun-Tao Wang, Xiao-Ling Zhang, Yu-Pu Sun

Journal of Electrochemistry

The anode coatings of Ru-Ti-Ir oxide with various solution concentrations were prepared by thermal decomposition.The scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD),accelerated life,polarization curve,cyclic voltammetry and electrochemical impedance.spectroscopy(EIS)tests were carried out.The results showed that there was an obvious effect of solution concentrations on the morphology of the coatings,but little effect on polarization of chlorine evolution.Voltammetric charges and double layer capacitances of anode coatings had a tendency to fall down firstly then increase afterwards as the solution concentration increased.

Go to article

Electrochemical Reduction Behavior Of Benzaldehyde In The Ionic Liquids, Ning Zhao, Wen-Ju Dong, Qi-Zeng Shi Feb 2006

Electrochemical Reduction Behavior Of Benzaldehyde In The Ionic Liquids, Ning Zhao, Wen-Ju Dong, Qi-Zeng Shi

Journal of Electrochemistry

In this paper, the electrochemical reduction of benzaldehyde was investigated in C4MIMBF4, C6MIMBF4  and C8MIMBF4 ionic liquids by cyclic linear sweep voltammetry,cyclic square-wave voltammetry and chronocoulometry.Benzaldehyde exhibits two successive one-electron irreversible reduction(EP1=-1.39 V, EP2=1.69 V) with GC electrode in C4MIMBF4, the voltammetric data for benzaldehyde give diffusion coefficients of 1.5*10-8cm2/s and 1.3*108cm2/s. There is one current peak in C6MIMBF4  and C8MIMBF4 ionic liquids due to their stronger alkalinity …

Go to article

Oxygen Enrichment Effect Of Ceo2 To The Cathode Performance Of Proton Exchange Membrane Fuel Cell, Xiang-Li Hou, Hong-Feng Xu, Jian-Hua Dong, Xin Sun Feb 2006

Oxygen Enrichment Effect Of Ceo2 To The Cathode Performance Of Proton Exchange Membrane Fuel Cell, Xiang-Li Hou, Hong-Feng Xu, Jian-Hua Dong, Xin Sun

Journal of Electrochemistry

CeO2 was added to Pt/C catalyst in the cathode of PEMFC by both sol and impregnation methods.The samples were evaluated by TEM,cyclic voltammogram techniques and proton exchange membrane fuel cell performance test.The addition of CeO2 obviously improved the performance of PEMFC and represented a notable function of oxygen enrichment in the cathode side.But with the addition of CeO2,part of the catalyst surface was covered and led to the performance drop of the PEMFC.The best content of CeO2 is 1% when it is added by impregnation method and 3% when it is added by sol method.

Go to article

Effects Of Srb Biofilm And Corrosion Product Films On Corrosion Behavior Of Carbon Steel, Jing Lin, Yong-Gui Yan, Guang-Zhang Chen, Guang-Zhou Liu, Qing-Fen Li Feb 2006

Effects Of Srb Biofilm And Corrosion Product Films On Corrosion Behavior Of Carbon Steel, Jing Lin, Yong-Gui Yan, Guang-Zhang Chen, Guang-Zhou Liu, Qing-Fen Li

Journal of Electrochemistry

Electrochemical techniques and surface analysis techniques were applied to study corrosion characteristic of A3 steel.The effects on corrosion behavior of A3 steel by sulfate-reducing bacteria(SRB)(biotic media)and corrosion product(abiotic media)were studied.The results showed that biofilms and corrosion product films play different role during different stages.Biofilms were easier flaky with increasing of its thickness.Non-uniform biofilms reduced pitting corrosion of the specimens.The corrosion product films formed under abiotic conditions were more adherently to the surface of the metal than those formed in biogenic media.

Go to article

In-Situ Detection Of The Effect Of Brighter In The Solution For Nickel And Phosphor Alloy, Jian Zheng, Ning Li, De-Yu Li, Guo-Feng Cui Feb 2006

In-Situ Detection Of The Effect Of Brighter In The Solution For Nickel And Phosphor Alloy, Jian Zheng, Ning Li, De-Yu Li, Guo-Feng Cui

Journal of Electrochemistry

In this work,the gold-plated mica was used for the substrate,the concentration of 5% of normal plating solution for the nickel was used as the mother solution,and the effect for the deposition by the brighter with ECSTM was in-situ detected.The solution for deposition without the brighter has no brightness,though the values of the roughness and the H_(A-V) have reduced in evidence after deposition;the solution for deposition with the complete brighter although has great brightness,the values of the roughness and the H_(A-V) have increased(after) deposition;the solution for deposition with the half brighter has a moderate effect on the H_(A-V) and (brightness).Hence,the brighter …

Go to article

Special Photoelectrochemical Response Of Nano-Crystalline Tio2 Electrode, Bi-Bo Lan, Jian-Zhang Zhou, Yan-Yan Xi, Hong-Xiang Chen, Guang-Hua Yao, Zhong-Hua Lin Feb 2006

Special Photoelectrochemical Response Of Nano-Crystalline Tio2 Electrode, Bi-Bo Lan, Jian-Zhang Zhou, Yan-Yan Xi, Hong-Xiang Chen, Guang-Hua Yao, Zhong-Hua Lin

Journal of Electrochemistry

The nano-crystalline TiO2 electrodes were prepared by spread method,electrodeposition and sol-gel method.The experimental results show that the nano-crystalline TiO2 electrodes have special photoelectrochemical response-the photocrrent-potential curves appear peaks.The special photoelectrochemical behaviors of nano-(crystalline) TiO2  electrodes are ascribed to nano-structure as well as special light induced redox reaction mechanism of nano-crystalline semiconductor electrodes.

Go to article

Degradation Of Aniline Wastewater By Electro-Heterogeneous Catalysis Reactor, Wei-Li Liu, Ai-Li Zhang, Ji-Ti Zhou, Bao-Jun Jia, Qun-Li Zhu Feb 2006

Degradation Of Aniline Wastewater By Electro-Heterogeneous Catalysis Reactor, Wei-Li Liu, Ai-Li Zhang, Ji-Ti Zhou, Bao-Jun Jia, Qun-Li Zhu

Journal of Electrochemistry

The treatment of aniline wastewater was investigated using novel electro-heterogeneous catalysis reactor.The effects of applied cell voltage,electrolysis lime,pH value and the electrolyte on electrolysis were investigated.The experimental results show that the reactor with a cell voltage of 30 V,an electrolysis time of 1 h,pH value of 7 and a salinity of 800 mg/L can achieve the best removal efficiency on aniline,which is more efficient than the sole electrochemical reactor.

Go to article

A Study Of Overcharge Characteristic Of Lithium-Ion Cells, Jing Pang, Shi-Gang Lu, Sha Liu Nov 2005

A Study Of Overcharge Characteristic Of Lithium-Ion Cells, Jing Pang, Shi-Gang Lu, Sha Liu

Journal of Electrochemistry

The overcharge characteristics and effect factors of lithium-ion cells containing LiMn2O4 cathodes were studied in detail. Overcharge testing of Lithium-ion cells with a systematic variation in the cell balance demonstrated that the overcharge characteristics of Lithium-ion cells was affected by the amount of cathode in the cells, which is independent of the amount of anode material. The rate of charge was found to be an important parameter, as electrolyte complete decomposition at low charge rates caused the end of overcharge testing, while high charge rates accelerated the rate of heat generation in the cells and the cell …

Go to article

First Prev Next Last