Inorganic Chemistry Commons^™

Fabrication And Characterization Of Intricate Nanostructures, Treva T. Brown

University of New Orleans Theses and Dissertations

Encapsulation of nanoparticles within hexaniobate nanoscrolls presents interesting advances in the formation of nanocomposites exhibiting unique multi-dimensional properties. Building upon previous successes, facile yet versatile wet-chemical and microwave-irradiation synthetic protocols for the fabrication of a series of hexaniobate composites are presented herein. Solvothermal and, more recently, microwave-assisted methods have been developed that allow for the fabrication of peapod-like structures. During solvothermal treatment, exfoliated hexaniobate nanosheets scroll around highly ordered chains of preformed nanoparticles (NPs) to produce nanopeapods (NPPs). This approach offers versatility and high yields, in addition to the potential for advanced functional device fabrication.

For the characterization of these …

Studying Metal-Organic Frameworks Via Solid-State Nmr: Gas Dynamics, Structure Determination, And Phase Transition, Yue Zhang

Electronic Thesis and Dissertation Repository

Metal-organic frameworks (MOFs) are a class of microporous materials constructed from virtually endless combinations of metal centres and organic linkers. MOFs have attracted intense research interest in recent decades, since MOFs have outstanding properties such as extremely high surface area, tuneable pore topology, good stability, and many others. MOFs are also promising candidates for gas storage. In this work, solid-state NMR (SSNMR) spectroscopy has been investigated to study MOFs and their guest molecules, since SSNMR can provide information on the short-range environment about target nuclei and can also reveal the dynamics of guest molecules.

An introduction to MOFs and SSNMR …

Aliovalent Dopants In Zno Nanocrystals: Synthesis To Electronic Structure, Dongming Zhou

Doctoral Dissertations

Semiconductor nanocrystal doping has stimulated broad interest for many applications including solar energy conversion, nanospintronics, and phosphors or optical labels. The study of the chemistry and physics of doped colloidal semiconductor nanocrystals has been dominated in the literature by isovalent dopants such as Mn²⁺ and Co²⁺ ions in II-VI semiconductors, in which the dopant oxidation state is the same as the cation ions. Until recently, aliovalent dopants has received much attention due to the plasmonic properties. Aliovalent is when the oxidation states of the dopant in the lattice differs from the cation ions. In the plasmonic semiconductor nanocrystals, …

Dynamic Studies Of Guest Molecules In Metal-Organic Frameworks And Zeolites Via Solid-State Nuclear Magnetic Resonance, Bowei Wu

Electronic Thesis and Dissertation Repository

Metal-organic frameworks (MOFs) are synthetic compounds with crystalline microporous structures, consisting of metal centres joined by organic linkers. Zeolites are a class of crystalline porous materials featuring negatively charged aluminosilicate frameworks and charge-balancing cations.

In this work, solid-state nuclear magnetic resonance (SSNMR) is used to probe guest molecule locations and dynamics in MOFs and zeolites, yielding detailed informations of guest motion within these porous materials

Chapter 2 describes SSNMR dynamic studies of ¹³CO₂, ¹³CO and C₂D₄ adsorption behaviour in the α - zinc formate MOF, [Zn₃(HCOO)₆], which were performed …

Nano/Submicro-Structured Iron Cobalt Oxides Based Materials For Energy Storage Application, Hongyan Gao

Masters Theses & Specialist Projects

Supercapacitors, as promising energy storage devices, have been of interest for their long lifespan compared to secondary batteries, high capacitance and excellent reliability compared to conventional dielectric capacitors. Transition metal oxides can be applied as the electrode materials for pseudocapacitors and offer a much higher specific capacitance. Co3O4 is one of the most investigated transition metal oxides for supercapacitor. Besides simple monometallic oxides, bimetallic transition oxides have recently drawn growing attention in electrochemical energy storage. They present many unique properties such as achievable oxidation states, high electrical conductivities because of the coexistence of two different cations in a single crystal …

Controlled Electrochemical Synthesis Of Single One-Dimensional Metal Nanochains Across Microgap Electrodes., Amareshwari Konutham

Electronic Theses and Dissertations

This study mainly focuses on the fabrication of single one dimensional (1D) NP chains across the 5-micron gap of Au two electrode devices (TED). This has been achieved by electrochemical deposition of Ag onto the two electrodes, soaking the TED in 0.1 M Cetyltrimethyl ammonium bromide for 2-3 hours, and then close monitoring of the current as a function of time while a voltage across the two Ag coated Au electrodes in air. One dimensional Ag nanoparticle chain formation occurred by oxidation of Ag to Ag⁺ at the positive electrode followed by movement of Ag⁺ ions to the …

Chelating Ligands And Nanomaterials Based On Graphene Oxide For The Reduction And Sequestration Of Radiometals And Protein Purification, Sam Groveman

Dissertations, Theses, and Capstone Projects

Nuclear waste remediation and protein purification using immobilized metals can benefit enormously from the design and implementation of novel chelating nanomaterials. Available commercial resins capable of sequestering metals are based on bulk materials such as organic polymers, ceramics, and their composites. The use of two-dimensional nanoplatforms with large surface areas expands the horizon for the research and development of new systems with higher efficiency and lower cost. Fundamental science challenges remain in the synthesis and characterization of these nanomaterials and their integration with known or novel coordinating ligands.

Chemical exfoliation of graphite under strong oxidizing conditions yields graphene oxide (GO) …

Microwave-Assisted Topochemical Manipulation Of Layered Oxide Perovskites: From Inorganic Layered Oxides To Inorganic-Organic Hybrid Perovskites And Functionalized Metal-Oxide Nanosheets, Sara Akbarian-Tefaghi

University of New Orleans Theses and Dissertations

Developing new materials with desired properties is a vital component of emerging technologies. Functional hybrid compounds make an important class of advanced materials that let us synergistically utilize the key features of the organic and inorganic counterparts in a single composite, providing a very strong tool to develop new materials with ”engineered” properties. The research presented here, summarizes efforts in the development of facile and efficient methods for the fabrication of three- and two-dimensional inorganic-organic hybrids based on layered oxide perovskites. Microwave radiation was exploited to rapidly fabricate and modify new and known materials. Despite the extensive utilization of microwaves …

Design And Fabrication Of Nanostructures For The Enhancement Of Photovoltaic Devices, Richard M. Prevost Iii

University of New Orleans Theses and Dissertations

In 2012 the net world electricity generation was 21.56 trillion kilowatt hours. Photovoltaics only accounted for only 0.1 trillion kilowatt hours, less than 1 % of the total power. Recently there has been a push to convert more energy production to renewable sources. In recent years a great deal of interest has been shown for dye sensitized solar cells. These devices use inexpensive materials and have reported efficiencies approaching 12% in the lab. Here methods have been studied to improve upon these, and other, devices. Different approaches for the addition of gold nanoparticles to TiO₂ films were studied. These …

Real Time Monitoring Of Photocatalysis: An Application And Expansion Of The Quartz Crystal Microbalance, Perrin Godbold

Senior Honors Projects, 2010-2019

There are many applications of photocatalytic chemistry, with hundreds of researchers investigating photocatalytic materials. Another method of investigation could aid these researchers and contribute significantly to this field. This study attempts to develop a new method of analysis by expanding the capabilities of the Quartz Crystal Microbalance (QCM) into the realm of photocatalysis. We coated QCM crystals with the stable and well-known photocatalyst, titanium dioxide, and utilized these coated crystals to begin to develop an analysis procedure for our modified instrument. Some indication of the QCM’s sensitivity was seen, but the UV irradiation elicited a frequency change independent of the …

Controlled Synthesis And Utilization Of Metal And Oxide Hybrid Nanoparticles, Cameron Cowgur Crane

Graduate Theses and Dissertations

This dissertation reports the development of synthetic methods concerning rationally-designed, hybrid, and multifunctional nanomaterials. These methods are based on a wet chemical, solution phase approach that utilizes the knowledge of synthetic organic and inorganic chemistry to generate building blocks in solution for the growth of nanocrystals and hybrid nanostructures. This work builds on the prior knowledge of shape-controlled synthesis of noble metal nanocrystals and expands into the challenging realm of the more reactive first row transition metals. Specifically, a microemulsion sol-gel method was developed to synthesize Au-SiO2 dimers as precursors for the synthesis of segmented heterostructures of noble metals that …

Functionalized Silica Gel For Adsorption Of Cesium From Solution, Kenneth Marshall Seaton Iii

Electronic Theses and Dissertations

Mesoporous silica gel containing embedded phosphotungstic acid (PTA) was synthesized by sol-gel co-condensation of tetraethyl orthosilicate with PTA in acidic media. The obtained material had high Brunauer-Emmett-Teller Theory (BET) surface area and pore volume. A characteristic band of the Keggin structure of PTA was present in its FT-IR spectrum while its X-ray diffraction patterns were absent. This proved the embedding of PTA on a sub-molecular level and not as a second phase. Acidic sites were determined by neutralization with base in aprotic solvent, followed by titration of the remaining base with an acid. The material demonstrated high adsorption capacity of …

29si Nmr And Saxs Investigation Of The Hybrid Organic-Inorganic Glasses Obtained By Consolidation Of The Melting Gels, Andrei Jitianu, Sylvian Cadars, Fan Zhang, Gabriela Rodriguez, Quentin Picard, Mario Aparicio, Jadra Mosa, Lisa C. Klein

Publications and Research

This study is focused on structural characterization of hybrid glasses obtained by consolidation of melting gels. The melting gels were prepared in molar ratios of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) of 75%MTES-25%DMDES and 65%MTES-35%DMDES. Following consolidation, the hybrid glasses were characterized using Raman, ²⁹Si and ¹³C Nuclear Magnetic Resonance (NMR) spectroscopies, synchrotron Small Angle X-Ray Scattering (SAXS) and scanning electron microscopy (SEM). Raman spectroscopy revealed the presence of Si–C bonds in the hybrid glasses and 8-membered ring structures in the Si–O–Si network. Qualitative NMR spectroscopy identified the main molecular species, while quantitative NMR data showed that the ratio …

Design Of 3d Macroporous Inverse Opal Tio2 Binary And Ternary Composites Sensitized With Gold Nanoparticles And Cds Quantum Dots For Photocatalysis, Daniel A. Corella

Master of Science in Chemical Sciences Theses

Materials composed of titanium (IV) oxide (TiO₂) have received enormous scientific interest due to titania’s abundance, non-toxicity, and photocatalytic proficiency, however its large band gap limits its applicability under ambient conditions. Various attempts have been made to incorporate titania into composite systems to sensitize it for activity under a broader range of wavelengths. One such method includes utilizing narrow band gap semiconductors to form an electron transfer process analogous to photosynthesis referred to as a Z-scheme. Z-scheme systems can catalyze the decomposition of aqueous pollutants via generation of reactive oxygen species after input of sunlight. This work reports …

Catalyzed Synthesis Of Zinc Clays By Prebiotic Central Metabolites, Marcelo I. Guzman, Ruixin Zhou, Kaustuv Basu, Hyman Hartman, Christopher J. Matocha, S. Kelly Sears, Hajatollah Vali

Chemistry Faculty Publications

How primordial metabolic networks such as the reverse tricarboxylic acid (rTCA) cycle and clay mineral catalysts coevolved remains a mystery in the puzzle to understand the origin of life. While prebiotic reactions from the rTCA cycle were accomplished via photochemistry on semiconductor minerals, the synthesis of clays was demonstrated at low temperature and ambient pressure catalyzed by oxalate. Herein, the crystallization of clay minerals is catalyzed by succinate, an example of a photoproduced intermediate from central metabolism. The experiments connect the synthesis of sauconite, a model for clay minerals, to prebiotic photochemistry. We report the temperature, pH, and concentration dependence …

Dopant-Defect Engineering In Strontium Titanate-Based Materials, Keith Lehuta

Doctoral Dissertations

Strontium titanate is a wide gap oxide perovskite that has been studied for numerous applications. Its potential use as a photocatalyst is limited due to only being able to utilize UV light. The introduction of metal dopant ions has been shown to alter the band structure to allow visible light photocatalysis, as well as alter the materials properties for other applications. This work will look to better explain the process of transition metal dopant ion incorporation and how the dopant ion can affect the defect chemistry of the material. The use of dopant specific spectroscopies, such as electron paramagnetic resonance …

Efficient Integration Of Plasmonic And Excitonic Properties Of Metal And Semiconductor Nanostructures Via Sol-Gel Assembly, Dilhara Liyanage

Theses and Dissertations

Research in nanoscience has gained noteworthy interest over the past three decades. As novel chemical and physical properties that are vastly different from extended solids are realized in nanosized materials, nanotechnology has become the center of attention for material in research community. Much to our amazement, investigations in the past two decades revealed that the nanocrystalline semiconductors are “THE PRIME CANDIDATES” to meet the growing energy demand, sensor development, cellular imaging and a number of other optoelectronic applications. Nonetheless, synthesis of nanostructures with control over physical parameters is not sufficient, yet assembling them into functional nanoarchitectures with unique and tunable …

Investigation Of Host-Sensitized Luminescence Of Trivalent Lanthanide Doped Yttrium Phosphate Using Vuv Spectroscopy, Zachary Way

All Master's Theses

Host-sensitized luminescence of yttrium phosphate doped with trivalent lanthanide elements prepared via two synthetic approaches was studied using VUV spectroscopy. A correlation between an unusually intense 150 nm excitation intensity and the ground state energy level of select trivalent lanthanide elements was proposed. Using spectroscopy, the host-to-activator transfer efficiencies of YPO₄:Ln³⁺ (Ln³⁺ = Sm³⁺, Eu³⁺ and Tb³⁺) were evaluated for two synthetic approaches. Electron-hole pair trapping efficiencies and S_loss values were calculated using published kinetic models.

Sol-Gel Chemistry: An Advanced Technique To Produce Macroscopic Nanostructures Of Metal And Semiconductor Colloids, Lamia Nahar

Theses and Dissertations

The fascinating physical properties that arise in materials limited to dimensions of 1-100 nm have gained noteworthy interest from the scientific community. Accordingly, there has been a lot of attention paid to the synthesis of discrete nanoparticles (NPs) and they are being investigated for a range of advanced technologies. Nonetheless, efficient use of nanomaterials in device applications require them to be assembled into solid state macro-structures while retaining their unique, nanoparticulate properties. To date, most commonly investigated assembling techniques include: covalent coupling of NPs surface groups, control evaporation of the solvent to produce ordered supercrystals or non-ordered glassy films, and …

Synthesis And Characterization Of Metallic Nanoparticles For Catalytic Applications, Sarah Smith

Theses and Dissertations

In recent years, research has focused on reducing the cost of catalysts in a variety of ways including using less expensive materials, improving the synthetic method, and increasing the catalytic activity, recovery, and recyclability. Typically with nanoparticles, the size, shape, composition, and surface coating have an effect on catalytic activity.^1-2 In this work, we focused on reducing the cost of precious metal based catalysts by altering the synthetic methods.

One way to lower the cost of synthesizing precious metal nanoparticles is by debasing the precious metal with a second cheaper more abundant metal. CuPd nanoparticles were synthesized in oleylamine …

Exploring The Structure And Properties Of Nanomaterials Using Advanced Electron Microscopy Techniques, Yao-Jen Chang

Theses and Dissertations--Chemistry

Nowadays people are relying on all kinds of electronic devices in their daily life. All these devices are getting smaller and lighter with longer battery life due to the improvement of nanotechnology and materials sciences. Electron microscopy (EM) plays a vital role in the evolution of materials characterization which shapes the technology in today’s life. In electron microscopy, electron beam is used as the illumination source instead of visible light used in traditional optical microscopy, the wavelength of an electron is about 10⁵ times shorter than visible light. By taking this advantage, the resolving power and magnification are greatly …

Heterogeneous Base Metal Catalyzed Oxidative Depolymerization Of Lignin And Lignin Model Compounds, John Adam Jennings

Theses and Dissertations--Chemistry

With the dwindling availability of petroleum, focus has shifted to renewable energy sources such as lignocellulosic biomass. Lignocellulosic biomass is composed of three main constituents, lignin, cellulose and hemicellulose. Due to the low value of cellulosic ethanol, utilization of the lignin component is necessary for the realization of an economically sustainable biorefinery model. Once depolymerized, lignin has the potential to replace petroleum-derived molecules used as bulk and specialty aromatic chemicals. Numerous lignin depolymerization strategies focus on cleavage of β-aryl ether linkages, usually at high temperatures and under reductive conditions.

Alternatively, selective benzylic oxidation strategies have recently been explored for …

Arsenic Removal With A Dithiol Ligand Supported On Magnetic Nanoparticles, John Hamilton Walrod Ii

Theses and Dissertations--Chemistry

Exposure to arsenic (As) in water, the ubiquitous toxin that poses adverse health risks to tens of millions, is the result of both anthropogenic and geochemical mobilization. Despite recent publicity and an increased public awareness, the dangers associated with arsenic exposure rank among the top priorities of public health agencies globally. Existing sequestration applications mainly include reductions and adsorption with zero-valent metals and their oxides. The performance of adsorption media is known to preferentially favor aqueous As(V) over As(III) due to the charge of the dissolved oxyanion. Magnetic nanoparticles (MNP) have been the focus of multidisciplinary research efforts for the …

Deconvolving The Steps To Control Morphology, Composition, And Structure, In The Synthesis Of High-Aspect-Ratio Metal Oxide Nanomaterials, Lei Yu

Theses and Dissertations--Chemistry

Metal oxides are of interest not only because of their huge abundance but also for their many applications such as for electrocatalysts, gas sensors, diodes, solar cells and lithium ion batteries (LIBs). Nano-sized metal oxides are especially desirable since they have larger surface-to-volume ratios advantageous for catalytic properties, and can display size and shape confinement properties such as magnetism. Thus, it is very important to explore the synthetic methods for these materials. It is essential, therefore, to understand the reaction mechanisms to create these materials, both on the nanoscale, and in real-time, to have design control of materials with desired …

Interactions Of Compounds Containing Group 12 And 16 Elements, Daniel Burriss

Theses and Dissertations--Chemistry

The focus of this dissertation is on the interactions of compounds containing group 12 and 16 elements. This work is presented in three major parts. First, the interaction of the synthetic dithiol N,N’-bis(2-mercaptoethyl)isophthalamide), abbreviated BDTH₂, with selenite. Second, the interaction of cysteine with Cd(II) and the biologically relevant Cd-Cysteine crystal structure. Third, the green synthesis of CdSe quantum dots (QDs).

The interaction of BDTH₂ with selenite is different from the interactions with other metals and metalloids previously studied. Under ambient conditions, BDTH₂ is oxidized to the disulfide, BDT(S-S), while selenite is reduced to elemental selenium. However, …

Size And Shape Control In Metal Nanoparticles And Nanocomposites, Tomendro Subedi

Theses and Dissertations (Comprehensive)

This thesis describes major findings on the shape transformation of the precursor silver decahedral nanoparticles (AgDeNPs) with pentagonal symmetry and twin defects into silver pentagonal prism nanoparticles (AgPPNPs) using Br¯ as a shape selective reagent. Silica-encapsulation of the gold-plated AgDeNPs was also carried out forming ordered arrays of silica encapsulated gold-plated AgDeNPs (SiO₂@Au@AgDeNPs) of different sizes. At first, synthetic procedures for AgDeNPs (pentagonal bipyramids), silver pentagonal rod nanoparticles (AgPRNPs) and gold-plating of AgDeNPs (Au@AgDeNPs) were optimized. Gold plating enhances the chemical stability of AgDeNPs and preserves the superior plasmonic properties of silver. This thesis deals with the transformation …