Environmental Chemistry Commons^™

Addressing Public Health Risks Of Persistent Pollutants Through Nutritional Modulation And Biomimetic Nanocomposite Remediation Platforms, Bradley J. Newsome

Theses and Dissertations--Chemistry

Due to their relative chemical stability and ubiquity in the environment, chlorinated organic contaminants such as polychlorinated biphenyls (PCBs) pose significant health risks and enduring remediation challenges. Engineered nanoparticles (NPs) provide a novel platform for sensing/remediation of these toxicants, in addition to the growing use of NPs in many industrial and biomedical applications, but there remains concern for their potential long-term health effects. Research highlighted herein also represents a transdisciplinary approach to address human health challenges associated with exposure to PCBs and NPs. The objectives of this dissertation research are two-fold, 1) to develop effective methods for capture/sensing and remediation …

Phosphate Esters, Thiophosphate Esters And Metal Thiophosphates As Lubricant Additives, David W. Johnson, John E. Hils

Chemistry Faculty Publications

Phosphate esters, thiophosphate esters and metal thiophosphates have been used as lubricant additives for over 50 years. While their use has been extensive, a detailed knowledge of how they work has been a much more recent development. In this paper, the use of phosphate esters and thiophosphate esters as anti-wear or extreme pressure additives is reviewed with an emphasis on their mechanism of action. The review includes the use of alkyl phosphates, triaryl phosphates and metal containing thiophosphate esters. The mechanisms of these materials interacting with a range of iron and steel based bearing material are examined.

Structure, Theoretical Studies And Coupling Reactions Of Some New Cyclic Boronic Esters, Andrew Kuttler, Sravanthi Durganala, Albert Fratini, Alexander Morgan, Vladimir Benin

Chemistry Faculty Publications

The present report describes the X-ray structural and theoretical studies of some new pinacolboronate esters, and it also outlines the use of the target structures in Suzuki coupling reactions to produce new aromatic or heteroaromatic esters and amides. X-ray structural analysis of the studied compounds revealed that the pinacolborane ring's position with respect to the benzene ring varies, depending on the particular environment. An ortho-positioned carboxylic ester (methyl ester) causes a nearly perpendicular orientation of the pinacolborane unit with respect to the benzene ring, whereas an ortho-positioned amide (N,N-dimethylamide) causes the pinacolborane unit to orient itself nearly coplanar. A plausible …

Characterization By Nmr Of Reactants And Products Of Hydrofluoroether Isomers, Cf3(Cf2)3och3 And (Cf3)2c(F)Cf2och3, Reacting With Isopropyl Alcohol, Howard Knachel, Vladimir Benin, William E. Moddeman, Janine C. Birkbeck, Thomas A. Kestner, Tayna L. Young

Chemistry Faculty Publications

The 3M Company product Novec™ 71IPA DL, a mixture of methoxyperfluorobutane, methoxyperfluoroisobutane and 4.5 wt.% isopropyl alcohol, has been found to be very stable at ambient temperature, producing fluoride at the rate of ~1 ppm/year. Our earlier kinetic and theoretical studies have identified the reaction mechanism. This paper identifies the ¹H and ¹⁹F NMR chemical shifts, multiplicities, and coupling constants of reactants and the major products that result from aging the mixture in sealed Pyrex NMR tubes for periods up to 1.8 years at temperatures from 26 °C to 102 °C. Chemical shifts and coupling constants of fluorine …

Interaction Between Lubricants Containing Phosphate Ester Additives And Stainless Steels, David W. Johnson, Matthew Bachus, John E. Hils

Chemistry Faculty Publications

One way to improve fuel efficiency in today’s jet aircraft engines is to create an environment for higher operating temperatures and speeds. New and improved lubricants and bearing materials must be developed to remain stable in these elevated operating temperatures. Three lubricants, with varying amounts of tricresyl phosphate added as an anti-wear/extreme pressure additive were tested on two different stainless steels at varying temperatures ranging from 300 °C to 350 °C in vacuum. Significant decomposition of the lubricant base-stocks and the phosphate ester additive did occur in most of the trials resulting in the formation of carboxylic acids and phenols. …

Preparation Of Phosphonoterephthalic Acids Via Palladium-Catalyzed Coupling Of Aromatic Iodoesters, Nathaniel Ivan, Vladimir Benin, Alexander Morgan

Chemistry Faculty Publications

The current article reports in detail the preparation of two phosphonoterephthalic acids: 2-phosphonoterephthalic acid (1) and 2,5-diphosphonoterephthalic acid (2). Efficient, scalable syntheses have been developed for both compounds based on Pd-catalyzed coupling reactions of iodinated terephthalate esters. Phosphonoterephthalic acids are potentially useful as flame-retardant additives or as monomers for the construction of acid-pendant polymer chains.

Reaction Between Polyol-Esters And Phosphate Esters In The Presence Of Metal Carbides, David W. Johnson, Carolyn Iacullo, John E. Hils

Chemistry Faculty Publications

The reaction of metal carbides with polyol esters found in aerospace lubricants and phosphate esters commonly used as additives was investigated. Carbides were of particular interest since modern materials under consideration at high temperature bearings have surfaces that are primarily metal carbides. Vanadium and chromium carbide were found to react with the ester and phosphate ester by a transesterification reaction, producing an alkyl phosphate which is less stable than the aromatic phosphate esters. In the process, the metal carbide is converted to the metal phosphate and metal polyphosphate, evidenced by the infrared and Raman spectra of the solid residue and …

Self-Assembling Of Gold Nanoparticles Array For Electro-Sensing Applications, Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

A colloidal solution of citrate-stabilized gold nanoparticles (AuNPs) with an average size of ca. 2.6 nm has been prepared, characterized and further implemented in electro-sensing applications. This colloidal solution of AuNPs has been prepared via the reduction of NaAuCl4 with sodium tetrahydroborate (NaBH4) using trisodium citrate as a stabilizer. The optical properties of this solution have been studied with UV–Vis spectroscopy. Next, these AuNPs have been immobilized onto a polycrystalline Au (poly-Au) electrode with the assistance of benzenedimethanethiol (BDMT), which served as a binder. Attention has been taken to ensure the formation of a compact impermeable layer of BDMT on …

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

Reactions Of Methyl Perfluoroalkyl Ethers With Isopropyl Alcohol: Experimental And Theoretical Studies, Howard Knachel, Vladimir Benin, Chadwick Barklay, Janine C. Birkbeck, Billy D. Faubion, William E. Moddeman

Chemistry Faculty Publications

The reaction of an isomeric mixture of the methyl perfluoroalkyl ether, C4F9OCH3 (Novec-7100), in the presence of isopropyl alcohol (IPA) and/or water has been studied by measuring the rate of product formation using an ion-selective electrode (ISE) for fluoride ion, Karl Fisher coulometric titrations for water, and 1H and 19F NMR spectroscopy for product identification and rate studies. The results showed the methyl perfluoroalkyl ether to be very stable with products forming at the rate of ∼1 ppm per year at a laboratory temperature of 20 °C. Measurements over the temperature range of 6° to 100 °C were made on …

Mercury Transportation In Soil Using Gypsum From Flue Gas Desulphurization Unit In Coal-Fired Power Plant, Kelin Wang

Masters Theses & Specialist Projects

This work investigates mercury flux in soil amended by gypsum from flue gas desulphurization (FGD) units of coal-fired power plants. There are two phases of this research, including field and greenhouse studies. Previous studies indicate that FGD gypsum could increase corn yield, but may lead to more mercury uptake by corn.

Recent studies have been carried out in greenhouses to investigate mercury transport in FGD gypsum treated soil. Major aspects include uptake of mercury by plants and emission of mercury into the atmosphere based on application rates of FGD gypsum. Additional aspects include rainfall, temperature, soil, and plants types. Higher …

Removal Of Heavy Metals Using Modified Limestone Media: Zinc And Cadmium, Keerthy Mandadi

Masters Theses & Specialist Projects

Heavy metal contamination is a serious concern throughout the world. Increased concentrations in drinking water have many negative impacts on human health. Limestone is an inexpensive and simple media for removing high concentrations of heavy metals from drinking water supplies. Ferric based media is commonly used to remove zinc, cadmium, lead, arsenic and other heavy metals. The drinking water standards set by the US EPA for cadmium, zinc and arsenic are 0.005 mg/L, 5 mg/L and 0.010 mg/L respectively. Bangladesh, parts of India, China and the United States have high concentrations of arsenic in drinking water. Although many technologies exist …

Optimization Of Magnetic Powdered Activated Carbon For Aqueous Hg(Ii) Removal And Magnetic Recovery, Emily K. Faulconer, Natalia Hoogesteijn Von Reitzenstein, David W. Mazyck

Physical Sciences - Daytona Beach

Activated carbon is known to adsorb aqueous Hg(II). MPAC (magnetic powdered activated carbon) has the potential to remove aqueous Hg to less than 0.2 mg/L while being magnetically recoverable. Magnetic recapture allows simple sorbent separation from the waste stream while an isolated waste potentially allows for mercury recycling. MPAC Hg-removal performance is verified by mercury mass balance, calculated by quantifying adsorbed, volatilized, and residual aqueous mercury. The batch reactor contained a sealed mercury-carbon contact chamber with mixing and constant N₂(g) headspace flow to an oxidizingtrap. Mercury adsorption was performed using spiked ultrapure water (100 mg/L Hg). Mercury concentrations …

Synthesis And Flame Retardant Testing Of New Boronated And Phosphonated Aromatic Compounds, Vladimir Benin, Sravanthi Durganala, Alexander Morgan

Chemistry Faculty Publications

The present report describes the preparation and use of some dimethyl terephthalate derivatives in transition metal-catalyzed coupling reactions to produce new reactive flame retardants. Dimethyl iodoterephthalate and dimethyl 2,5-diiodoterephthalate were successfully employed in the preparation of phosphonic and boronic esters and acids. The latter were tested for heat release with a microcombustion calorimeter (ASTM D7309) to determine the potential for heat release reduction of these flame retardant molecules. The results showed that the addition of boronic or phosphonic acids greatly lowered the heat release, due to a condensed phase (char formation) mechanism. Adding ester groups to the boronic acids or …

Development Of Tailor-Designed Gold-Platinum Nanoparticles Binary Catalysts For Efficient Formic Acid Electrooxidation, Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

The modification of a glassy carbon (GC) electrode with platinum (PtNPs) and gold (AuNPs) nanoparticles is targeted to fabricate efficient anodes for the electrooxidation of formic acid (FA). A proper adjustment of the deposition sequence of PtNPs and AuNPs could eventually enhance the electrocatalytic activity of the electrode in such a way that suppresses the CO poisoning effect during FA oxidation. The highest catalytic activity is obtained at the Au/Pt/GC electrode (with PtNPs firstly deposited on the GC electrode followed by AuNPs). This superb enhancement is quantified by comparing the relative ratio of the direct vs. the indirect oxidation peaks …

The Tetrafluoroborate Salt Of 4-Methoxybenzyl N-2-(Dimethylamino)Ethyl-N-Nitrosocarbamate: Synthesis, Crystal Structure And Dft Calculations, Helene Hedian, Vladimir Benin

Chemistry Faculty Publications

The tetrafluoroborate salt of 4-methoxybenzyl N-2-(dimethylamino)ethyl-N-nitrosocarbamate was prepared in two steps, via the corresponding carbamate. Its crystal structure is monoclinic, space group P21/c. The unit cell dimensions are: a = 19.499(8) Å, b = 5.877(3) Å, c = 15.757(7) Å, α = 90°, β = 110.019(7)°, γ = 90°, V = 1696.5(12) Å3, Z = 4. The structure exhibits an unexpected, pseudo-gauche conformation with respect to the C2–C3 bond, due to a stabilizing hydrogen bond between the carbonyl oxygen (O1) and the hydrogen atom at the trialkylammonium center (H3n), with a distance between them of …

Preparation And Characterization Of A Composite Of Gold Nanoparticles And Single-Walled Carbon Nanotubes And Its Potential For Heterogeneous Catalysis, Anne Shanahan, James Sullivan, Mary Mcnamara, Hugh Byrne

Articles

A single-walled carbon nanotube-supported gold nanoparticle composite was prepared and characterized by X-ray diffraction, scanning transmission electron microscopy/scanning electron microscopy/transmission electron microscopy, energy-dispersive X-ray analysis, atomic absorption spectroscopy, nitrogen adsorption, Raman spectroscopy, and ultraviolet-visible spectroscopy. The Au particles were found to be crystalline, with a well-defined and narrow particle-size distribution, centered around 7 nm. The activity and selectivity of the composite for solventless aerobic oxidation of a secondary alcohol were examined, and a conversion efficiency of 95% was obtained.

Application Of Raman Spectroscopy To Lubricants, Lubricated Surfaces And Lubrication Phenomena, David W. Johnson

Chemistry Faculty Publications

Recent advances in lasers and detector technologies and the development of low-cost instruments and fiber-optic probes have brought about an explosion in the lubrication systems being studied by Raman spectroscopy. This article provides examples of the use of Raman spectroscopy in the study of lubrication phenomena, including the characterization of liquid lubricants, lubricant additives, and solid lubricants; the study of vapor-phase lubrication; and the use of coated nanoparticles as lubricants.

A Sodium Salt Of The Dimer Of Boronoterephthalic Acid Anhydride, Scott Simmons, Albert Fratini, Vladimir Benin

Chemistry Faculty Publications

The title compound, sodium bis­(6-carb­oxy-1-hy­droxy-3-oxo-1,3-dihydro-2,1-benzoxaborol-1-yl)oxidanium, Na+·C16H15B2O13-, was prepared in two steps from 2-bromo-p-xylene. Its crystal structure was determined at 140 K and has triclinic (P) symmetry. The compound presents a unique structural motif, including two units of the cyclic anhydride of boronoterephthalic acid, joined by a protonated, and thereby trivalent, oxonium center. Association in the crystal is realized by complementary hydrogen bonding of the carboxyl groups, as well as by coordination of the sodium cations to the oxygen centers on the five-membered rings.

Theoretical Investigation Of A Reported Antibiotic From The 'Miracle Tree' Moringa Oleifera, Michael Horwath, Vladimir Benin

Chemistry Faculty Publications

Moringa oleifera, sometimes called the “Miracle Tree,” has received international attention for its potential to improve health in impoverished tropical areas. In addition to high vitamin content in the leaves and pods, the tree contains compounds with antioxidant and antibacterial properties. This study focused on the theoretical investigation of the suggested structure of one antibacterial compound, “pterygospermin,” whose existence was proposed after some studies of the roots of M. oleifera. The structure of pterygospermin was first proposed by a research group working in the 1950s, but later studies have not found evidence of this compound and have instead …

A Practical Photoelectrochemical Cell Using Nonprecious Metal Electrodes, Patrick Enright, Tony Betts, John Cassidy

Articles

Abstract: Photoelectrochemical cells (PECs) can be used to harvest light from the oxidation of dissolved organic matter. Similar to fuel cells but requiring light to operate, PECs contain a light assisted electrode that oxidises electron rich materials (anode); these electrons then flow to a typically Pt cathode where O₂ is normally the electron acceptor. In this work a PEC cell containing inexpensive materials was shown to (a) mineralise typical organic compounds present in waste water and (b) produce electricity from their decomposition. The PEC cell consisted of a TiO₂ coated conducting ink anode exposed to a light source, …

Fabrication And Preliminary Characterization Of Hydrophobic Silica Aerogel Films For Oil Remediation Studies, Ellen Yang

Pomona Senior Theses

Due to the potential of oil sorbents for oil spill clean-up, hydrophobic silica-based aerogel thin films have been synthesized and characterized by various methods. Aerogels were prepared using a two-step acid/base sol-gel process and functionalized with trimethylchlorosilane in hexane, followed by drying in ambient conditions. After film deposition by spin-coating, samples were characterized by scanning electron microscopy, nitrogen adsorption analysis (BET surface area = 377.66 m2 /g), and variable-angle spectroscopic ellipsometry (thickness of 287.00 ± 0.85 nm, refractive index of 1.08, porosity of 80.9%). Unlike previous studies with aerogel films, quartz crystal microbalance with dissipation monitoring (QCM-D) was applied to …

Preparation And Characterization Of Some Substituted Benzyl N-Nitrosocarbamates Containing An N-2-(Methylthio)Ethyl Or A Bis(2-Aminoethyl)Sulfide Functionality, Satya Venkata, Eric Shamo, Vladimir Benin

Chemistry Faculty Publications

The synthesis and characterization of some substituted benzyl N-nitrosocarbamates with an N-2-(methylthio)ethyl or a bis(2-aminoethyl)sulfide functionality is reported, as a part of a long-term goal to design and prepare novel photolabile structures that could be used as substances for controlled release of alkylating and/or crosslinking agents. The synthesis was accomplished by reaction of benzyl chloroformates with the corresponding amines, resulting in the preparation of carbamates. The latter were subsequently nitrosated, utilizing two different N-nitrosation methods, to yield the target structures.

Preparation Of Halogenated Derivatives Of Thiazolo[5,4-D]Thiazole Via Direct Electrophilic Aromatic Substitution, Vladimir Benin, Alan T. Yeates, Douglas Dudis

Chemistry Faculty Publications

Chlorination and bromination reactions of thiazolo[5,4-d]thiazole led to the generation of its mono- and dihalogenated derivatives. These are the first instances of successful direct electrophilic aromatic substitution in the thiazolo[5,4-d]thiazole ring system. X-ray analysis demonstrates that both 2-bromothiazolo[5,4-d]-thiazole and 2,5-dibromothiazolo[5,4-d]thiazole are planar structures, with strongly manifested π-stacking in the solid state. Theoretical analysis of the pyridine-catalyzed halogenation (MP2/6-31+G(d) and B3LYP/6-31+G(d)calculations) reveals that introduction of one halogen actually leads to a slightly enhanced reactivity towards further halogenation. Several halogenation mechanisms have been investigated: 1) The direct C-halogenation with N-halopyridine as electrophile; …

C–N Bond Rotation And E–Z Isomerism In Some N-Benzyl-N-Methylcarbamoyl Chlorides: A Dft Study, Michael Horwath, Vladimir Benin

Chemistry Faculty Publications

The current report presents the first theoretical study of the restricted CN bond rotation in carbamoyl chlorides. Several N-benzyl-N-methylcarbamoyl chlorides were investigated, with varying pattern of substitution in the aromatic ring. Optimizations and frequency calculations were conducted employing DFT at the B3LYP/6-31+G(d) level of theory. Each of the studied structures exhibits a pair of rotamers (s-Z and s-E), generated upon rotation around the C(O)N bond. The s-E isomer is the global minimum in every case, but the preference for it is usually less than 1 kcal/mol. Two possible transition state structures were identified …

Improved Nitrate Sensing Using Ion Selective Electrodes Based On Urea–Calixarene Ionophores, Benjamin Schazmann, Dermot Diamond

Articles

Urea–calix[4]arenes 1 and 2 were synthesised and incorporated into ISE membranes for assessment as sensors for inorganic anions in water. 1 revealed a strong response to all anions following the Hofmeister selectivity order. For ISEs of 2, the response to a portion of the anion series was suppressed, increasing the margin of selectivity of nitrate over chloride, a common interferant of nitrate in fresh and marine water samples. The performance of ISEs containing 2 was compared to commercially available alkylammonium nitrate ion-exchange salts used for nitrate sensing. Our ISEs performed favourably in terms of sensitivity, linear range and LOD performing …

A Novel Tio2 / Pvc Layer For Use In A Photoelectrochemical Cell, Faiza Touati, John Cassidy, Kevin Mcguigan

Articles

A novel method of coating titanium dioxide on a glassy carbon electrode as a polyvinylchloride composite , is described. On illumination , there is an enhanced voltammetric current at this TiO2/PVC composite in aqueous formic acid solution. This electrode is used as the basis of a formic acid fuel cell where oxygen is reduced at a platinum cathode. The system yields 100 cm-2 for 0.01 mol dm-3 HCOOH in 0.1 mol dm-3 NaOH under illumination from a 150 W xenon lamp. The current without illumination is 0.5 cm-2.

Secondary N-Nitrosocarbamate Anions: Structure And Alkylation Reactions. A Dft Study, Vladimir Benin

Chemistry Faculty Publications

The current article reports theoretical studies (DFT: B3LYP/6-31+G(d)) on the structure and alkylation reactions of the anions of some secondary N-nitrosocarbamates, a class of ambident nucleophiles whose chemistry has been little explored. Several anions (1–4), with an increasing size of the carbamate alkyl (aryl) group were investigated, in an attempt to establish the influence of the size of that group on the thermal stability and regioselectivity of alkylation of the title anions. The conclusion is that thermal stability and the mode of reaction are affected significantly only in the presence of very large and branched carbamate groups. The thermal …

Development Of A Calix[4]Arene Sensor For Soft Metals Based On Nitrile Functionality, Benjamin Schazmann, Dermot Diamond

Articles

The current work is amongst the first to examine the potential usefulness of the nitrile functional group in potentiometric analytical sensors for soft metals. Nitrile functionality has hereby been incorporated into a calix[4]arene skeleton to give a series of new cation selective hosts. The analytical sensing behaviour of these hosts was examined by Ion Selective Electrode (ISE) based potentiometry. In all cases a preference for soft metals was observed, explained primarily in terms of soft–soft compatibility between calix[4]arene nitrile hosts and metal guests in combination with a classical ‘lock and key’ best fit mechanism. Hosts 2, 3 and 4 showed …

Preparation Of Some Substituted Terephthalic Acids, Susanna Branion, Vladimir Benin

Chemistry Faculty Publications

We report in detail the preparation of two substituted terephthalic acids: 2‐sulfomethylterephthalic acid (1) and 2‐phosphonoterephthalic acid (2). Efficient, short syntheses have been developed for both compounds. They are potentially useful monomers for construction of acid‐pendant polymer chains.