Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal of Electrochemistry

Articles 1471 - 1500 of 2389

Full-Text Articles in Chemistry

Electrochemical Performance Of Li(1-X)MXFepo4 Cathode Materials Synthesized By Polymer Pyrolysis Route, Ting Li, Jiang-Feng Qian, Yu-Liang Cao, Han-Xi Yang, Xin-Ping Ai May 2007

Electrochemical Performance Of Li(1-X)MXFepo4 Cathode Materials Synthesized By Polymer Pyrolysis Route, Ting Li, Jiang-Feng Qian, Yu-Liang Cao, Han-Xi Yang, Xin-Ping Ai

Journal of Electrochemistry

Olivine Li1-xMxFePO4(M=Cr3+, Mg2+, Mn2+, Ni2+) were synthesized by a polyacrylates-pyrolysis route. The structural and electrochemical properties of the as-synthesized cathode materials were investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrochemical charge/discharge cycling. The results indicate that the metallic ions doped at low concentration do not affect the crystalline structure of the material, but considerably improve the rate capability and cycle performance of LiFePO4 at high rate.

Go to article

Study On The Electrochemical Extraction Of Oxygen And Influence Factors Of Oxygen Purity, Xiao-Ke Zhi, Guang-Chuan Liang, Xiu-Qin Ou, Shu-Guang Liu, Bin Han May 2007

Study On The Electrochemical Extraction Of Oxygen And Influence Factors Of Oxygen Purity, Xiao-Ke Zhi, Guang-Chuan Liang, Xiu-Qin Ou, Shu-Guang Liu, Bin Han

Journal of Electrochemistry

A method for the electrochemical extraction of oxygen is prasented.The concentration of HO2-ions and the purity of oxygen were measured by KMnO4 standard method,and by cuprammonium absorb method respectively.Effect of the membrane and the spacing between cathode and anode on the purity of oxygen were also tested.The experiment results were showed that the system could work continuously above 500h and the purity of oxygen was above 99.8% when using proper membrane at 80 mA·cm-2 current density,Electrochemical reaction included 4e reacting course and 2e reacting course,the ratio of 2e reaction is about 38%~44% of the whole …

Go to article

Studies On The Ion Conductive Performance Of Composite Polymer Electrolyte Containing Nano-Scale Sio2, Lin Ye, Yu-Mei Zhao, Xiao-Wen Zhang, Zeng-Guo Feng, Ying Bai, Feng Wu Feb 2007

Studies On The Ion Conductive Performance Of Composite Polymer Electrolyte Containing Nano-Scale Sio2, Lin Ye, Yu-Mei Zhao, Xiao-Wen Zhang, Zeng-Guo Feng, Ying Bai, Feng Wu

Journal of Electrochemistry

Nano-silicon oxide was doped into a novel comblike polyether,poly(3-(methoxy(triethylenoxy))methyl-3'-methyloxetane) to prepare a series of composite polymer electrolyte.The ion conductivity measurement revealed that the composite polymer electrolyte added with 5% weight fraction of SiO2 has the highest ion conductivity of 7.8×10-5 S/cm at 30℃ and 4.5×10-4 S/cm at 80℃,which is increased 30%~60% as compared to the polymer electrolyte without adding any SiO2.DSC results implied that the nano-silicon oxide inserts into the macromolecule chains to increase the free volume and decrease the glass transition temperature to enhance the ion conductivity.In addition,it seems that the crystallization occurred due …

Go to article

Electrochemical Performance Of 1-Ethyl-3-Methylimidazolium Trifluoroacetic To The Electrolyte Of Electrochemical Double Layer Capacitor, Guo-Hua Sun, Kai-Xi Li, Qiang Li, Hui Fan, Jian-Yu Gu Feb 2007

Electrochemical Performance Of 1-Ethyl-3-Methylimidazolium Trifluoroacetic To The Electrolyte Of Electrochemical Double Layer Capacitor, Guo-Hua Sun, Kai-Xi Li, Qiang Li, Hui Fan, Jian-Yu Gu

Journal of Electrochemistry

The electrochemical performance of an Electrochemical Double Layer Capacitor consisted of higher specific surface area activated carbon and ionic liquid \CF3COO was investigated by constant current charge/discharge and cyclic voltammegrams(CV) methods.The results indicated that the \CF3COO had High specific capacitance,excellent cyclic characteristics and high charge/discharge efficiency.Specific capacitance of the EDLC increased with electrochemical window increase at the range of steady electrochemical window.Energy density increased with current and voltage increase,power density deduced with current increase but increased with electrochemical window increase.These conclusions revealed that the \CF3COO was very suitable for the electrolyte of EDLC.

Go to article

Polarization Properties Of The Cu/Paa Composite Films, Li-Chun Zhang, Qing-Shan Li, Meng-Meng Zheng, Fu-Quan Wu Feb 2007

Polarization Properties Of The Cu/Paa Composite Films, Li-Chun Zhang, Qing-Shan Li, Meng-Meng Zheng, Fu-Quan Wu

Journal of Electrochemistry

Porous alumina templates with different apertures were fabricated by the pore widening and increase of the anodic oxidation voltage,and then Cu nanowires were synthesized in porous alumina templates by alternating electro-deposition method.The transmission spectrum and polarization spectrum of Cu/PAA composite films were measured.Experiment have indicated that both the pore widening and increase the anodic oxidation voltage can make the transmittance drop,but the pore widening cannot enhance the polarization performance of the micropolarizer.The extinction ratio can be improved with increase of the template oxidation voltage or the Cu nanowires' diameter.

Go to article

Preparation And Lithium Storage Performance Of Nano-Structural Sno2/Carbon Nanotubes Composite Electrodes, Hong-Bing Wei, Ling Huang, Xiao-Bin Wu, Fu-Sheng Ke, Jin-Shu Cai, Xiao-Yong Fan, Fang-Zu Yang, Shi-Gang Sun Feb 2007

Preparation And Lithium Storage Performance Of Nano-Structural Sno2/Carbon Nanotubes Composite Electrodes, Hong-Bing Wei, Ling Huang, Xiao-Bin Wu, Fu-Sheng Ke, Jin-Shu Cai, Xiao-Yong Fan, Fang-Zu Yang, Shi-Gang Sun

Journal of Electrochemistry

The Nano-structural SnO2/Carbon Nanotubes Composites were prepared in a solution of SnCl2,ethylene glycol(EG),purified MWCNTs and sodium dodecyl sulfate(SDS) at 160 ℃.The phase structure and surface morphology of the composites were measured by XRD HRTEM and SEM.The results indicate that there are high dispersions and high loadings of SnO2 nanoparticles on MWCNTs.Electrochemical lithium storage performance was studied preliminarily on the obtained samples.MWCNTs modified with SnO2 nanoparicles were shown to have a higher electrochemical reversible capacity than that of MWCNTs during the charge and discharge process.MWCNTs can accommodate the larger structure strain of the active materials …

Go to article

Effect Of 2,2'-Dipyridyldipyridyl And K4Fe(Cn)6 On Electroless Copper Plating Using Glyoxylic Acid As Reducing Agent, Dan-Dan Shen, Fang-Zu Yang, Hui-Huang Wu Feb 2007

Effect Of 2,2'-Dipyridyldipyridyl And K4Fe(Cn)6 On Electroless Copper Plating Using Glyoxylic Acid As Reducing Agent, Dan-Dan Shen, Fang-Zu Yang, Hui-Huang Wu

Journal of Electrochemistry

The electroless copper plating was studied in a bath consisting of glyoxylic acid as reducing agent,Na2EDTA as complexing agent,both 2,2'-dipyridyl and K4Fe(CN)6 as additives,focused on the influence of the additives on the deposition rate,as well as on the composition,structures and surface morphology of the deposits.It was found that adding an optimum amount of 2,2'-dipyridyl and K4Fe(CN)6 to the bath will not only improve the stability of the bath,but also increase the deposition rate by 100 %.The simultaneous addition of both additives causes the deposits to bright appearance and the change in morphology.The …

Go to article

The Influence Of Electrolytic Conditions On Synthesis Of Feo42-, Yan Zhou, Wei-Hua Yang, Dong-Qin Bi, Ting-Ting Huang, Zhen Sun, Quan-Feng Guo Feb 2007

The Influence Of Electrolytic Conditions On Synthesis Of Feo42-, Yan Zhou, Wei-Hua Yang, Dong-Qin Bi, Ting-Ting Huang, Zhen Sun, Quan-Feng Guo

Journal of Electrochemistry

The FeO42-was synthesized using iron lattice as anode and the solid K2FeO4 was also prepared.Influence of electrolytic conditions,such as stir,ultrasonic,temperature and current density on the current efficiency were studied.The results showed that preferable ferrate(VI) current yield was obtained in a current density of 10 mA·cm-2,temperature 30 ℃ and 14 mol/L NaOH as electrolyte under at stirring effect.

Go to article

Variable Frequence Switching Power Supply Used To Aluminum Foil Corrosion, Xiang-Dong Zhuo, Lan Sun, Guo-Qing Qian, Chang-Jian Lin Feb 2007

Variable Frequence Switching Power Supply Used To Aluminum Foil Corrosion, Xiang-Dong Zhuo, Lan Sun, Guo-Qing Qian, Chang-Jian Lin

Journal of Electrochemistry

A new variable frequence and multi-wave power supply used to aluminum foil corrosion is introduced. The switching supply power supply controlled by the microcontroller and Variable Frequence in low band and multi-wave, big power supply controlled by the electronic switch bridge for changing phase were designed. This power supply does not need bulky and cumbersome transformer, and the frequency at lower limit is not limited, even lower than 1Hz.

Go to article

Study On The Electrochemical Enhanced Self-Assembled Cobalt-Porphyrin Monolayer, Bei Zhang, Rong Wang, Guo-Yang Zhu, Xiaowei Cao, Xia-Qin Wu, Zong-Rang Zhang, Takeo Ohsaka Feb 2007

Study On The Electrochemical Enhanced Self-Assembled Cobalt-Porphyrin Monolayer, Bei Zhang, Rong Wang, Guo-Yang Zhu, Xiaowei Cao, Xia-Qin Wu, Zong-Rang Zhang, Takeo Ohsaka

Journal of Electrochemistry

According to the different coordination ability between Cobalt(II) porphyrin and Cobalt(Ⅲ) porphyrin,an electrochemical modulated self-assembling process was developed to prepare the CoTMPP/MP/Au(E) modified electrode. The O2 reduction catalytic activity and the Raman spectrum of the CoTMPP/MP/Au(E) modified electrode were found to be similar to those of the CoTMPP/MP/Au(I) modified electrode obtained by the immersion method, which was suggested that both modified electrodes have the similar well oriented structure and electrochemical behavior. Compared with CoTMPP/Au modified electrode, the modified electrodes with mercaptopyridine ligand were showed better electrocatalytic activity and stability.

Go to article

Effects Of Direct Current Bias Potentials On Lipid Membranes Forming On A Glassy Carbon Electrode, Yu-Hui Li, Hong-Wei Zhang, Gui-Lan Song, Zhan-Jun Zhang, Sheng-Min Cai Feb 2007

Effects Of Direct Current Bias Potentials On Lipid Membranes Forming On A Glassy Carbon Electrode, Yu-Hui Li, Hong-Wei Zhang, Gui-Lan Song, Zhan-Jun Zhang, Sheng-Min Cai

Journal of Electrochemistry

The effects of direct current(DC) bias voltage on the structure of lipid membranes forming on a glassy carbon electrode(GCE) was investigated by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS).The experiment showed that the lipid membranes can be formed with either positive or negative bias potential exerted.When bias voltage was exerted,bilayer lipid membranes tended to form due to the electrostatic interaction between the superficial positive charges on the polarized electrode and the negative charged part of PC.When the positive bias voltage overrun the range,the lacunas on s-BLMs would increase,and the BLMs would be broken.A proper equivalent circuit was nonlinearly fitted,based on the …

Go to article

Charge-Discharge Behaviors And Properties Of A Lab-Scale All-Vanadium Redox-Flow Single Cell, Ping Zhao, Hua-Min Zhang, Yue-Hua Wen, Bao-Lian Yi Feb 2007

Charge-Discharge Behaviors And Properties Of A Lab-Scale All-Vanadium Redox-Flow Single Cell, Ping Zhao, Hua-Min Zhang, Yue-Hua Wen, Bao-Lian Yi

Journal of Electrochemistry

An experimental setup with two external saturated calomel reference electrodes(SCE)and two flow cells was established for flow battery research application.By using this setup,the cell voltage,potentials and open circuit potentials of the positive and negative electrodes for a lab-scale flow battery single cell,could be determined simultaneously during charge-discharge(C-D) cycle test.Then,the ohmic internal resistance drop(iR drop),overpotentials at the negative and positive electrodes of the cell during C-D process,were calculated.The average iR drop accounts for about 74% of the total voltage losses during the C-D cycle at current density of 60 mA·cm-2,suggesting the voltage efficiency(VE) of vanadium redox-flow battery(VRB) single cell …

Go to article

Composite Electroplating And Characterizations Of Sn-Sba15 Anode For Lithium-Ion Batteries, Xiao-Yong Fan, Jin-Mei Xu, Quan-Chao Zhuang, Hong-Hong Jiang, Ling Huang, Yan-Xia Jiang, Quan-Feng Dong, Shi-Gang Sun Feb 2007

Composite Electroplating And Characterizations Of Sn-Sba15 Anode For Lithium-Ion Batteries, Xiao-Yong Fan, Jin-Mei Xu, Quan-Chao Zhuang, Hong-Hong Jiang, Ling Huang, Yan-Xia Jiang, Quan-Feng Dong, Shi-Gang Sun

Journal of Electrochemistry

Sn-SBA15 anode was prepared by composite electroplating. The first discharge and charge capacity was 1075mAh/g and 630mAh/g respectively. After fifty charge/discharge cycles, the charge and discharge capacity of Sn-SBA15 were retained above 400mAh/g. XRD patterns indicated that the Sn-SBA15 has tetragonal crystal type. SEM images showed that the Sn-SBA15 had a honeycombed surface. EIS results indicated that there was SEI film formed on the surface of Sn-SBA15 electrode.

Go to article

Electrochemical Oxidation Of The Phenol In The Chloride System, Yong Liu, Dan Liu, Shi-Lin Zhao, Jing-Jing Lai Feb 2007

Electrochemical Oxidation Of The Phenol In The Chloride System, Yong Liu, Dan Liu, Shi-Lin Zhao, Jing-Jing Lai

Journal of Electrochemistry

The Ru-Ir /Ti electrode as cathode to electrolysis the synthetic phenolic wastewater was studied. The effect of the initial chloride concentration on the electrolytic treatment result has been discussed. Experiment result shows that the electrochemical oxidation of phenol suits to one kinetics equation in given electrolytic time. If the initial chloride concentration in wastewater increases, the time of the electrochemical oxidation of phenol can be shorten, in other words the apparent rate constant is greater. The middle matters of electrochemical oxidation of phenol in the chloride system detected out by HPLC and GC-MS is mainly 1-chloro-phenol, 4-chloro-phenol, 2,4-dichloro-phenol, 2,6-dichloro-phenol, 2,4,6-trichloro-phenol, …

Go to article

Ac Impedance Study On The Bcx Cells, Hong-Hua Ge, Jun Wang, Jing Liu, Guo-Ding Zhou, Yi-Ping Wu, Gang Wu Feb 2007

Ac Impedance Study On The Bcx Cells, Hong-Hua Ge, Jun Wang, Jing Liu, Guo-Ding Zhou, Yi-Ping Wu, Gang Wu

Journal of Electrochemistry

The electrodes in both Li/SOCl2 cells and BCX cells were studied by ac impedance spectroscopy.The results indicate that the resistance of the electrode passive layer increased with the storage time,then became stabilized in both kinds of cells.But the electrode resistance decreased a lot after adding BrCl into the cells.The resistance of the Li electrode decreased about a half to that without BrCl,and the value of the glassy carbon electrode decreased from about 100 kΩ to 2 kΩ.The huge resistance of the glassy carbon electrode indicates that it is the control electrode of the cell.

Go to article

Diamond-Like-Carbon Film Prepared On Stainless Steel Substrates By Liquid Phase Electrochemical Deposition, Jing-Yong Du, Gui-Feng Zhang, Guo-Qing Li, Xiao-Duo Hou Feb 2007

Diamond-Like-Carbon Film Prepared On Stainless Steel Substrates By Liquid Phase Electrochemical Deposition, Jing-Yong Du, Gui-Feng Zhang, Guo-Qing Li, Xiao-Duo Hou

Journal of Electrochemistry

Diamond-like carbon (DLC) films were deposited on stainless steel substrates at atmospheric pressure and low temperature (60 ℃) by electrolysis in a methanol solution with a pulseddirect current power supply. The morphology and microstructure of the resulting DLC films were analyzed using atomic force microscopy(AFM), scanning electron microscopy (SEM), Raman spectroscopy and Fourier transformation infrared spectrometry (FTIR). The experimental results show that the hydrogenated diamond-like carbon filmsare smooth and compact. Raman spectroscopy analysis confirmed the presence of a strongpeak at 1332.51 cm-1, which is assigned to crystalline diamond. The deposition rate can be enhanced to 0.5 μm/h by …

Go to article

Comparison Of The Electrochemical Reactivity Of Electrodes Modified By Carbon Nanotubes With Different Sizes, Guo-Feng Yang, Neng-Qin Jia, Zhi-Yong Wang Feb 2007

Comparison Of The Electrochemical Reactivity Of Electrodes Modified By Carbon Nanotubes With Different Sizes, Guo-Feng Yang, Neng-Qin Jia, Zhi-Yong Wang

Journal of Electrochemistry

The electrochemical activity of multi-walled carbon nanotubes(MWNTs) with different sizes,including four different MWNTs with the same length and different diameter,two different MWNTs with the same diameter and different length has been assessed and compared.The various MWNTs modified electrodes were prepared by immobilizing the suitable amount of MWNTs onto a glassy carbon electrode,and their voltammetric responses to ferricyanide,uric acid and dopamine were examined.The corresponding cyclic voltammetric data was showed that the electrochemical and electrocatalytic activities are depended on the nanotube length.The electrochemical reactivity of short MWNT(S-MWNT) is better than that of long MWNT(L-MWNT),which may be mainly attributed to the existence of …

Go to article

Mwnts Modified Gc Electrode For Hydrogen Peroxide Determination, Hong-Juan Wang, Chun-Mei Zhou, Hao Yu, Feng Peng, Jin-Kun Fang Feb 2007

Mwnts Modified Gc Electrode For Hydrogen Peroxide Determination, Hong-Juan Wang, Chun-Mei Zhou, Hao Yu, Feng Peng, Jin-Kun Fang

Journal of Electrochemistry

A MWNTs modified GC electrode was constructed successfully to be used to detect hydrogen peroxide.Two methods of maximum anodic current of cyclic voltommogram and chronoamperometry were adopted to measure the concentration of hydrogen peroxide.The results show that the MWCNTs can enlarge the effective surface area of GC electrode and can enormously enhance the electron transfer.The sensitivity and correlation coefficient for hydrogen peroxide detection are 2.84 μA/mmol·L-1,0.997 and 1.5 μA/mmol·L-1,0.971 for cyclic voltammetry and chronoamperometry,respectively.The procedure of the two methods to detect hydrogen peroxide is simple,and the results obtained are satisfied.

Go to article

Influence Of Electrolyte On The Preparation And Electrocatalytic Properties Of Pt/Gc Electrodes, Sheng-Pei Chen, Yan-Xin Chen, Tao Huang, Xiao-Wen Hou, Shi-Gang Sun Feb 2007

Influence Of Electrolyte On The Preparation And Electrocatalytic Properties Of Pt/Gc Electrodes, Sheng-Pei Chen, Yan-Xin Chen, Tao Huang, Xiao-Wen Hou, Shi-Gang Sun

Journal of Electrochemistry

Influence of electrolyte on the electrocatalytic properties of Pt/GC electrodes for formic acid oxidation were studied by using cyclic voltammetry, SEM and electrochemical in situ FTIR spectroscopy. It has demonstrated that the surfaces of Pt/GC electrodes prepared in H2SO4 (Pt/GC1) or in HClO4(Pt/GC2) are all composed of platinum particles, but which crystals are some differences in size and shape.Diameters of platinum particles on the surface Pt/GC1 are of 100~200 nm, and with spheral shape in the majority. The sizes of platinum particles on the Pt/GC2 electrode are larger in general,part of particles is of cube …

Go to article

Study On The Electrochemical Machining Of Titanium Alloys Tc4 With The Method Of Uniform Design, Mei-Li Zhang, Di Zhu, Zheng-Yang Xu Feb 2007

Study On The Electrochemical Machining Of Titanium Alloys Tc4 With The Method Of Uniform Design, Mei-Li Zhang, Di Zhu, Zheng-Yang Xu

Journal of Electrochemistry

For the electrochemical machining of titanium alloys,a passivating film tends to form on the machining surface,which holdbacks the process of machining;and some corrosive pittings can appear on the non-machining surface,which leading to the poor surface quality.So how to improve the machining surface quality,this is a hot problem in aerospace industries.An experiment plan has been made with the method of uniform design and the variance analysis has been carried out using the result data of the previous experiments.The experimental results show that an excellent machining surface with Ra 0.38 μm would be obtained in the electrolyte of 10% NaCl solution,4% Na …

Go to article

Investigations On Edlcs Using Pmma-Based Gel Polymer Electrolytes, Xiang-Li Meng, Jin-Ling Yin, Juan Ren, Bao-Hong Zhang Feb 2007

Investigations On Edlcs Using Pmma-Based Gel Polymer Electrolytes, Xiang-Li Meng, Jin-Ling Yin, Juan Ren, Bao-Hong Zhang

Journal of Electrochemistry

Polymethyl methacrylate(PMMA) based gel polymer electrolytes electrochemical double layer capacitors(GPE-EDLCs) were fabricated by an in situ polymerisatonal method with actived carbon electrodes,using propylene carbonate(PC) and ethylene carbonate(EC) as plasticizer,lithion perchlorate as surporting electrolytes.The ion conductivity values of GPEs were evaluated by AC impedance.The properties of PMMA-based GPEs capacitors were researched by impedance spectrum,cyclic voltammetry,galvanostatic charge-discharge.It showed that the ion conductivities of the PMMA-based gel polymer electrolytes reached to 3.7 mS·cm-1 at ambient tempreture.The working voltage of the capacitors reached to 3.0 V.The specific capacitance of the capacitor was obtained as high as 41.6 F·g-1(I=1 mA·cm-2).The …

Go to article

Electrochemical Characteristics Of La0.7-XCeXMg0.3Ni2.4Co0.6(X=0～0.4) Hydrogen Storage Alloys, Ling-Ling Xiao, Yi-Jing Wang, Yi Liu, Jian-Sheng Cao, Da-Wei Song, Li-Fang Jiao, Hua-Tang Yuan Feb 2007

Electrochemical Characteristics Of La0.7-XCeXMg0.3Ni2.4Co0.6(X=0～0.4) Hydrogen Storage Alloys, Ling-Ling Xiao, Yi-Jing Wang, Yi Liu, Jian-Sheng Cao, Da-Wei Song, Li-Fang Jiao, Hua-Tang Yuan

Journal of Electrochemistry

The effect of partial substitution of Ce for La on the structure and the electrochemical properties of the La0.7-xCexMg0.3Ni2.4Co0.6(x=0～0.4)hydrogen storage alloys have been investigated systematically.The result of X-ray powder diffraction(XRD) show that the alloys are all consisted of the LaNi3 phase and the LaNi5 phase.The maximum discharge capacity is decreased gradually with increase of the Ce contents,but the cycling life is improved obviously.

Go to article

Fabrication And Performance Of Ni-Scsz Cermet Anode Modified By Coating With Gd0.2Ce0.8O2 For A Sofc, Ren-Zhu Liu, Bo Huang, Xiao-Feng Ye, Shao-Rong Wang, Jia-Di Cao, Huai-Wen Nie, Ting-Lian Wen Feb 2007

Fabrication And Performance Of Ni-Scsz Cermet Anode Modified By Coating With Gd0.2Ce0.8O2 For A Sofc, Ren-Zhu Liu, Bo Huang, Xiao-Feng Ye, Shao-Rong Wang, Jia-Di Cao, Huai-Wen Nie, Ting-Lian Wen

Journal of Electrochemistry

A Ni-scandia-stabilized zirconia(Ni-ScSZ) cermet anode modified by coating with nano-sized gadolinium-doped ceria(GDC,Gd0.2Ce0.8O2) was prepared using a simple combustion process for the solid oxide fuel cell(SOFC) running on methane fuel. X-ray diffraction(XRD) and scanning electron microscopy(SEM) indicated that the surface of Ni-ScSZ was coated by nano-sized GDC particles(<100nm). Single cell testing showed that the 2.0%(by mass) GDC-coated Ni-ScSZ anode had better performance. The highest power densities of the cell with this anode were 825 and 848mW/cm2 at 850℃ in humidified hydrogen and methane, respectively, whereas the corresponding values were 584 and 586mW/cm2 for the cell with Ni-ScSZ anode.Electrochemical impedance spectra(EIS) illustrated that the cell with Ni-ScSZ anode exhibited far greater impedances than the cell with 2.0%(by mass) GDC-coated Ni-ScSZ anode.Then the …

Go to article

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu Nov 2006

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu

Journal of Electrochemistry

The cooperative effects of trimethl phosphate and vinylene carbonate as additives for Li-ion batteries are investigated by using the cyclic voltammetry,electrochemical impedance spectroscopy and scanning electronic micro-photographs.The results show that the combination application of TMP and VC as additives for Li-ion batteries not only enhances safety of the batteries,but also improves their cycling performance.The reason may be ascribed to firstly VC being reduced and the reduction product polymerized to form excellent solid electrolyte interface(SEI) layer on the surface of graphite electrode during the first charge and discharge process,which prevents effectively the decomposition of TMP on the surface of the graphite …

Go to article

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou Nov 2006

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou

Journal of Electrochemistry

Silver(Ag) was deposited in the pores of Nafion membrane by ion exchange and succedent hydrogen reduction;the structures of Nafion-Ag membrane were measured by TEM and XRD,the diffusion coefficients of oxygen in Nafion-Ag was determined by electrochemical limited current method.The results showed that after deposited silver,the pores in the Nafion were enlarged by silver grains;the oxygen diffusion coefficient was increased about four times.By introducing silver in the thin Nafion film around the cathode catalyst,the performance of PEM fuel cell have a evident increasing in high current density, which shows the facilitated effects of silver to oxygen transportation in PEM fuel cell.

Go to article

Preparation And Electrochemical Property Of Bam Boo-Shaped Silicon Nanotubes, Zeng-Tao Liu, Yan-Peng Fu, Chen Li, Yong Yang Nov 2006

Preparation And Electrochemical Property Of Bam Boo-Shaped Silicon Nanotubes, Zeng-Tao Liu, Yan-Peng Fu, Chen Li, Yong Yang

Journal of Electrochemistry

A novel 1D bamboo-shaped silicon nanotubes was synthesized by chemical vapor deposition with Au catalyst and their electrochemical properties were primarily studied.The results showed that these silicon nanotubes were amorphous with the length about tens micrometer and the diameter about one hundred nanometer.Cyclic voltammetry studies showed that Li ions could intercalate into such silicon nanotubes at two location,i.e.,from the conjoint location and the wall of the hole.Meanwhile,the bamboo-shaped structure could help release the expansion of volume,which is usually serious in the lithium batteries.

Go to article

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li Nov 2006

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li

Journal of Electrochemistry

Cathode materials LiNi1/3Co1/3Mn1/3O2 were prepared by low-heating solid-state reaction.The micro-structure and morphology of as-synthesized materials have been investigated by using XRD and SEM. The compatibilities of LiNi1/3Co1/3Mn1/3O2 with purchased LiPF6/ EC+DMC+DEC electrolyte and prepared LiBOB/EC+DEC+EMC electrolyte have also been studied. The Li/LiNi1/3Co1/3Mn1/3O2 batteries showed excellent electrochemical properties in the LiPF6/EC+DMC+DEC electrolyte. Reversible discharge capacities of 167, 163, 163, 157, 147mAh/g at 0.5C, 1C, 1.5C, 2C, 3C rate between 2.7~4.35 V, with stable cycling performances have …

Go to article

Column Thin-Layer Electrolytic Self-Regenerating Suppressor For Ion Chromatography, Wei-Xiong Huang, Rong-Zong Hu, Shu-Chao Wu, Dan-Mei Pan Nov 2006

Column Thin-Layer Electrolytic Self-Regenerating Suppressor For Ion Chromatography, Wei-Xiong Huang, Rong-Zong Hu, Shu-Chao Wu, Dan-Mei Pan

Journal of Electrochemistry

A new type of column thin-layer electrolytic selfregenerating suppressor for ion chromatography was proposed.A porous electrode was used in this suppressor,incorporating the electrode and the electrolyte compartment,and eliminating the voltage across the electrolyte compartment.The design of the column thin-layer configuration of suppression compartment simplified the structure of suppressor and reduced the dead volume,improving the performance of suppressor.

Go to article

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen Nov 2006

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen

Journal of Electrochemistry

Electrochemical behavior of Bup has been investigated by means of cyclic voltammetry,linear sweep voltammetry,differential pulse voltammetry and square wave voltammetry.The results indicate that the electrochemical behavior of Bup on the surface of glassy carbon electrode is corresponding to a irreversible two-protons and two-electrons process with absrption.The square wave voltammetry for determination of Bup in actual samples has been established.

Go to article

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai Nov 2006

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai

Journal of Electrochemistry

A new electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate,gadolinium hexacyanoferrate(GdCHF),was prepared by electrochemically deposition on the surface of a glassy carbon electrode with a potential cycling procedure.The result of SEM indicated that the GdHCF was in the form of particles adhered on the surface of electrode.There were two different shapes and sizes of GdHCF forming on the surface of electrode.FTIR spectrum of GdHCF showed a very strong and sharp peak,which located at 2062.5 cm-1 and corresponded to the stretching vibration of the C≡N group in the GdHCF.The cyclic voltammetric results indicated that the GdHCF/GC electrode exhibited two …

Go to article

First Prev Next Last