Chemistry Commons^™

Polymer Nanocomposites Containing High Aspect Ratio Particulates: Innovation In Co-Extruded Multilayer Barrier Films, Kevin Meyers

Dissertations

Delaminated montmorillonite (MMT) clay/ maleic anhydride grafted LLDPE nanocomposite multilayer films with alternating layers of LDPE were produced through multilayer co-extrusion. The MMT concentration within the nanocomposite layers was increased through annealing the films in the melt due to a mismatch in interdiffusion rates of the polymer layers. Analysis of the nanocomposite layers upon annealing revealed that the platelets impinged upon one another resulting in significant improvement in oxygen barrier in the multilayer system, exceeding the results of bulk nanocomposites.

Model analysis demonstrated that increasing the nanoplatelet aspect ratio or initial concentration in the filled layers would lead to even …

Photoelectrochemical Studies On Non-Noble Metal Based Catalysts Towards Tandem Solar Water Splitting, Arun Siddarth Sridhar

Dissertations

Photoelectrochemical (PEC) water splitting makes direct use of solar energy incident on semiconductor photoelectrodes, and it is a convenient, economic option to produce high purity hydrogen at low temperatures. The use of multiple light absorbers can increase overall solar energy utilization and provide a solution to the trade-off between overall band gap and band edge positioning of photoelectrodes specific to solar water oxidation and water reduction. The study of non-noble metal based catalysts for hydrogen evolution reaction (HER) and oxygen evolution reactions (OER) are essential for economic practical commercialization of photo-electrolyzers. This dissertation focuses on the use of a variety …

Pro-Antimicrobial Networks Prepared Via Degradable Thiol-Ene Acetal Photopolymerization, Sarah Swilley

Honors Theses

A degradable, antimicrobial polymer network with acetal crosslink junctions derived from p-anisaldehyde (pA), a common constituent found in star anise extract, is reported. The p-anisaldehyde was converted into a bis-functional acetal alkene monomer, which serves as a pro-antimicrobial form of the active aldehyde and a building block for materials referred to as pro-antimicrobial polymer networks via degradable acetals (PANDAs). Subsequently, the bis-functional acetal alkene monomer was photopolymerized with a multifunctional thiol to yield a thiol-ene network. PANDAs exhibit surface erosion behavior and yield sustained release of pA over 38 days when exposed to neutral or biologically relevant conditions. The pA …

Investigation Of The Effects Of Hydrogen Bonding On The Enantiomeric Excess Of Pig Liver Esterase Hydrolysis Products, Matthew Hasler

Honors Theses

Pig Liver Esterase (PLE) is an effective enzyme used in the Masterson Research Group due to its ability to hydrolyze only one ester in a malonic diester. PLE is employed for creating chiral molecules for the synthesis of unnatural amino acid precursors. Previous research in the group found that malonic half esters with hydrogen bonding capable substrates yielded varying degrees of enantiomeric excess, and non-hydrogen bonding substrates yielded racemic mixtures.1,2 The compounds synthesized contained substrates consisting of thiophene rings in the second and third position, and these molecules act as a control for the other research done in the group. …

Photoelectrochemical Investigations On Novel Earth Abundant Solid State Catalysts For Solar Water Oxidation, Nathaniel Branimir Kurtz

Honors Theses

In light of a looming fossil fuel scarcity, many forms of alternative, clean energy production are being researched in order to provide a more sustainable source of energy production for the future. One area of research is on using novel, abundant catalytic materials in conjunction with semiconducting materials to drive the splitting of water in order to produce hydrogen gas, an energy-rich fuel. Currently, efficiency is limited by the energy bottleneck posed by the oxygen evolution reaction (OER) half of water splitting. In this work, cobalt selenide (CoSe) catalyst paired with the semiconductor iron oxide (Fe2O3) has been identified as …

The Meniscus-Guided Deposition Of Semiconducting Polymers, Xiaodan Gu, Leo Shaw, Kevin Gu, Michael F. Toney, Zhenan Bao

Faculty Publications

The electronic devices that play a vital role in our daily life are primarily based on silicon and are thus rigid, opaque, and relatively heavy. However, new electronics relying on polymer semiconductors are opening up new application spaces like stretchable and self-healing sensors and devices, and these can facilitate the integration of such devices into our homes, our clothing, and even our bodies. While there has been tremendous interest in such technologies, the widespread adoption of these organic electronics requires low-cost manufacturing techniques. Fortunately, the realization of organic electronics can take inspiration from a technology developed since the beginning of …

Adsorption Of Tnt, Dnan, Nto, Fox7, And Nq Onto Cellulose, Chitin, And Cellulose Triacetate. Insights From Density Functional Theory Calculations, Guido Todde, Sanjiv K. Jha, Gopinath Subramanian, Manoj K. Shula

Faculty Publications

Insensitive munitions (IM) compounds such as DNAN (2,4-dinitroanisole), NTO (3-nitro-1,2,4-triazol-5-one), NQ (nitroguanidine), and FOX7 (1,1-diamino-2,2-dinitroethene) reduce the risk of accidental explosions due to shock and high temperature exposure. These compounds are being used as replacements for sensitive munition compounds such as TNT (2,4,6-trinitromethylbenzene) and RDX (1,3,5-hexahydro-1,3,5-trinitro-1,3,5-triazine). NTO and NQ in IM compounds are more soluble than TNT or RDX, hence they can easily spread in the environment and get dissolved if exposed to precipitation. DNAN solubility is comparable to TNT solubility. Cellulosic biomass, due to its abundance in the environment and its chemical structure, has a high probability of adsorbing …

Electrophilic Cleavage And Functionalization Of Polyisobutylenes Bearing Unsaturations In The Backbone And Synthesis Of Polymers For This Process, Christopher Campbell

Dissertations

In the first project, we demonstrated a new reaction, which is a subset of the Friedel‑Crafts alkylation reaction, in which the alkylating carbocation undergoes a cleavage reaction prior to reaction with the aromatic substrate. This reaction was discovered by the observation that when a PIB containing a large amount of coupled fraction was subjected to a mixture of protic and Lewis acids (HCl/TiCl₄) in the presence of an alkoxybenzene compound, the coupled fraction was quantitatively converted to its constituent monofunctional chains, which became functionalized by the alkoxybenzene.

In the second project, a commercial polymer, poly(isobutylene-co-isoprene) (butyl …

Air-Processed Polymer Photovoltaics: Advanced Morphological Characterization And Synthesis Of New Materials For Increased Light Absorption, Levi Moore

Dissertations

Organic photovoltaics (OPVs) have undergone intense development in recent years due to their potential to produce inexpensive, flexible, lightweight, and portable solar cells utilizing organic photoactive materials. Polymer-based OPVs have recently surpassed the 10 % in laboratory-scale devices, but require strict processing conditions in inert environments. Materials and processing methods that are workable in air are therefore desired. In addition to the light-absorbing and charge transport properties of the active layer materials, the morphology, crystallinity and orientation of the components of the phase-separated blend are paramount in determining OPV device performance This dissertation explores the processing of the model polymer …

Barrier Properties Of Polymer Nanocomposites With Graphene Oxide And Its Derivatives: Mechanism And Applications In Anticorrosive Coatings, Yidan Guan

Dissertations

Metallic devices made from steel or aluminum are subjected to deterioration by environmental contaminants over time. As one of the corrosion control methods, organic coatings show many advantages due to their low cost, versatility, decoration aesthetics and effective protections. Corrosion protection theories and failure modes of organic coatings are still not fully understood due to complicated interactions in the coating-metal-environment system, however, it is widely agreed that the barrier nature of polymeric materials towards aggressive species, such as oxygen, water, electrolyte, plays a key role. Improved barrier property of polymer nanocomposites (PNCs) with two-dimensional (2D) carbon filler, graphene and graphene …

Taming Charge Transport In Semiconducting Polymers With Branched Alkyl Side Chains, Bob C. Schroeder, Tadanori Kurosawa, Tianren Fu, Yu-Cheng Chiu, Jaewan Mun, Ging-Ji Nathan Wang, Xiaodan Gu, Leo Shaw, James Kneller, Theo Kreouzis, Michael F. Toney, Zhenan Bao

Faculty Publications

The solid-state packing and polymer orientation relative to the substrate are key properties to control in order to achieve high charge carrier mobilities in organic field effect transistors (OFET). Intuitively, shorter side chains are expected to yield higher charge carrier mobilities because of a denser solid state packing motif and a higher ratio of charge transport moieties. However our findings suggest that the polymer chain orientation plays a crucial role in high-performing diketopyrrolopyrrole-based polymers. By synthesizing a series of DPP-based polymers with different branched alkyl side chain lengths, it is shown that the polymer orientation depends on the branched alkyl …

Fatty Acid Concentration And Phase Transitions Modulate Aβ Aggregation Pathways, Pratip Rana, Dexter Dean, Edward Steen, Ashwin Vaidya, Vijayaraghavan Rangachari, Preetam Ghosh

Faculty Publications

Aggregation of amyloid β (Aβ) peptides is a significant event that underpins Alzheimer disease (AD) pathology. Aβ aggregates, especially the low-molecular weight oligomers, are the primary toxic agents in AD and hence, there is increasing interest in understanding their formation and behavior. Aggregation is a nucleation-dependent process in which the pre-nucleation events are dominated by Aβ homotypic interactions. Dynamic flux and stochasticity during pre-nucleation renders the reactions susceptible to perturbations by other molecules. In this context, we investigate the heterotypic interactions between Aβ and fatty acids (FAs) by two independent tool-sets such as …

Cellulose Reinforced Thermoplastic Composites By In-Situ Ring-Opening Polymerization, Shahab Kashani Rahimi

Dissertations

Over the past two decades, the increasing concern about the negative environmental impacts of synthetic materials has led to rising interests in utilizing renewable natural resources to develop polymer materials with comparable properties and performance to their synthetic counterparts. One of the major fields of interest is polymer composites where the replacement of synthetic fibers with bio renewable natural fibers is of great potential. However, the processing difficulties, in terms of fiber dispersion and thermal stability have limited the application of cellulosic fibers to polymers with low processing temperatures which are mostly hydrophobic polymers. As a result, the true reinforcing …

Anodic Nanocatalysts For Formic Acid Fuel Cells: An Electrochemical Study, Tamanna F. Shanta Mcfarland

Dissertations

Direct formic acid fuel cells (DFAFCs) have been reported as a prominent source of alternative green energy and solution to imminent energy crisis for the last two decades. The challenge to commercialize DFAFCs is primarily the utilization of cost effective, high performance and durable anodic catalyst for formic acid oxidation (FAO). Consequently, this dissertation addresses the extensive electrochemical study of a number of nanomaterials towards the potential use as electrocatalysts for FAO. Morphology and elemental analyses of the prepared nanomaterials were obtained using electron microscopy techniques.

After a general introduction and overall review of this dissertation (Chapter I), studies of …

Synthesis And Catalytic Evaluation Of Novel C-Alpha-Methyl-Beta-Proline Analogues, And Concise Synthetic Approach To Nh-Fmoc-S-Trityl-C-Alpha-Methyl Cysteine, Hari Kiran Kotapati

Dissertations

In the field of chemistry there is a growing demand for small molecule organocatalysts such as amino acids, more specifically proline and its analogues, which could catalyze various key chemical reactions in the synthesis of several biologically important molecules. Even though natural proline is reported to catalyze various chemical reactions, its use as organocatalyst is limited mainly due to the solubility issues in the reaction media and high catalyst loadings, which is not very ideal for bulk scale manufacturing. To address these limitations we planned to develop unnatural analogues of proline that could catalyze the reactions with lower catalyst loadings …

Electrogenerated Chemiluminescent Studies Of 9,10-Diphenylanthracene, Rubrene, Tris(2,2'-Bipyridine)Ruthenium(Ii) Species, And Their Derivatives For Sensitive Detection Of Biomolecules, Pradip Bastola

Dissertations

This dissertation explored and investigated the coreactant electrogenerated chemiluminescent (ECL) properties of unmixed and mixed systems of highly efficient ECL emitters, such as 9,10-diphenylanthracene (DPA), rubrene (RUB), and tris(2,2′-bipyridine)ruthenium(II) [(Ru(bpy)₃²⁺)] species as well as their water-soluble derivatives, which can serve as ECL labels for sensitive bioanalysis of single or multiple analytes. The screening of most favorable common ECL coreactants, their concentration effects along with the effect of working electrode materials on ECL behavior, and energy transfer related interactions between ECL emitters were systematically investigated. In addition, a strategy for improvement of ECL signals with the use of …

Property Morphology Correlations Of Organic Semiconductor Nanowires, Frederick Marshall Mcfarland

Dissertations

Chemically doped and non-doped P3HT nanoaggregates are studied to establish a comprehensive understanding of the interplay between their morphology and various optoelectronic properties. One-dimensional nanoaggregates of P3HT are chosen as the model systems here due to their high surface/volume ratio and suitability for microscopic investigations.

Atomic force microscopy (AFM) and kelvin probe force microscopy (KPFM) are used to correlate property/morphology characteristics of non-doped P3HT nanowhiskers. Topographical measurements indicate that individually folded P3HT motifs stack via interfacial interactions to form nanowhiskers in solution. Further aging leads to multi-layered nanowhiskers with greater stability and less instances of π-π sliding of interfacial edge-on …

Preferential Binding Effects On Protein Structure And Dynamics Revealed By Coarse-Grained Monte Carlo Simulation, Ras B. Pandey, D.L. Jacobs, Barry L. Farmer

Faculty Publications

The effect of preferential binding of solute molecules within an aqueous solution on the structure and dynamics of the histone H3.1 protein is examined by a coarse-grained Monte Carlo simulation. The knowledge-based residue-residue and hydropathy-index-based residue-solvent interactions are used as input to analyze a number of local and global physical quantities as a function of the residue-solvent interaction strength (f). Results from simulations that treat the aqueous solution as a homogeneous effective solvent medium are compared to when positional fluctuations of the solute molecules are explicitly considered. While the radius of gyration (R_g) of the …

Synthesis Of Polythioether Nanoparticles Via Thiol-Alkene/Alkyne Photopolymerization In Miniemulsion, Susan E. Walley

Honors Theses

Emulsion-based processes – such as miniemulsion polymerizations – provide well-studied synthetic routes to polymer nanomaterials. Miniemulsion polymerizations are characterized as aqueous dispersions of small, narrowly distributed monomer droplets created through high shear and stabilized against Ostwald ripening/collisional degradation by addition of an appropriate surfactant and costabilizer. In this work, thiol–alkene/alkyne photopolymerization in miniemulsion is demonstrated as a simple, rapid, and one-pot synthetic approach to polythioether nanoparticles with tuneable particle size and clickable functionality. Nanoparticles with mean particle diameters ranging from 45 nm to 200 nm were synthesized through simple modifications to the miniemulsion formulation and processing parameters. Facile access to …

Kinetic Study Of Conjugated Polymer Packing And Agglomeration, Skye R. Travis

Honors Theses

Although organic electronic materials are flexible, cheap to fabricate, and molecularly tunable, their performance has generally been less efficient than that of their inorganic counterparts. Chemical doping has been attempted as a method to increase the efficiency of organic materials. During this process, an organic material, typically a conjugated polymer, is exposed to an oxidant/reductant, called a dopant. Electron transfer between host polymer and dopant molecules increases the charge carrier density in the doped host material, making it a more efficient conductor. The effects of doping using 2,3,5,6-tetrafluoro-tetracyanoquinodimethane (F4TCNQ) on low molecular weight poly(3-hexylthiophene-2,5-diyl) (LMW P3HT) in varying ratios of …

Characterization Of Epoxy/Amine Networks With Glycidal Polyhedral Oligomeric Silsesquioxane Surface Modified Silica Nanoparticles, Reese K. Sloan

Honors Theses

Silica nanoparticles were surface modified with octa-functional glycidal polyhedral oligomeric silsesquioxane (G-POSS) and incorporated into an epoxy/amine system in an effort to increase the mechanical performance of the inorganic/organic hybrid material. The silica nanoparticles were first functionalized with 3-aminoprpyltrimethoxysilane (APTMOS) at 5 and 10 weight percent, and then modified with G-POSS at ratios of 1:10 and 1:5 (APTMOS: G-POSS). The modified particles were then incorporated into an epoxy/amine network consisting of diglycidyl ether of bisphenol A (DGEBA) and aromatic amine, diamine diphenyl sulfone (4,4’ DDS) at 1 and 5 weight percent, resulting in 8 different formulations. The incorporation of the …

Phospholipase Dζ Enhances Diacylglycerol Flux Into Triacylglycerol, Wenyu Yang, Geliang Wang, Jia Li, Philip D. Bates, Xuemin Wang, Doug K. Allen

Faculty Publications

Plant seeds are the primary source of triacylglycerols (TAG) for food, feed, fuel, and industrial applications. As TAG is produced from diacylglycerol (DAG), successful engineering strategies to enhance TAG levels have focused on the conversion of DAG to TAG. However, the production of TAG can be limited by flux through the enzymatic reactions that supply DAG. In this study, two Arabidopsis phospholipase D_ζ genes (AtPLD_ζ1 and AtPLD_ζ2) were coexpressed in Camelina sativa to test whether the conversion of phosphatidylcholine to DAG impacts TAG levels in seeds. The resulting transgenic plants produced 2% to 3% more TAG …

Design And Synthesis Of Polymer Brush Surfaces With Complex Molecular Architectures And Morphologies, Wei Guo

Dissertations

The combination of surface-initiated polymerization (SIP) and postpolymerization modification (PPM) is a powerful technique for the fabrication of functional soft surfaces. Better understanding the influence of the aforementioned factors on the PPM effectiveness is valuable for fulfilling the potential of the PPM approach for the fabrication of functional soft surfaces. Specifically, by carefully balancing modification reactivity and limitation of mass transport, polymer brush with composition heterogeneity and gradient along the normal direction of the surface otherwise unattainable by methods of direct polymerization can be fabricated via the PPM approach which opens doors to new routes to polymer brush with complex …

Influence Of Multiwall Carbon Nanotubes On Corrosion Performance And Water Hydrogen Bonding Of Epoxy-Amine Thin Films, Greg William Curtzwiler

Dissertations

This dissertation research sought to provide a fundamental basis of understanding to commence the systematic investigation of developing economically viable fully formulated epoxy-amine coating systems containing multiwall carbon nanotubes (MWCNT). Namely, a facile and rapid method for multiwall carbon nanotube surface modification and molecular structure interpretation was developed to assist in designing MWCNT-polymer interactions and achieving high levels of dispersion. Additionally, a rapid and quantitative method was developed to investigate the dispersibility potential of MWCNTs possessing a given surface modification in combination with a dispersion protocol which can further be utilized as a quality control metric in commercial applications. It …

Advancing Structure-Property Relationships In Functional Materials Via Thiol-Ene Photopolymerization, Brian Richard Donovan

Dissertations

Thiol-ene photopolymerizations provide a robust and versatile synthetic pathway to functional materials, and owing to the radical step-growth nature of polymerization and the resulting homogenous network structure, provide non-convoluted insight into how network chemistry influences and dictates macromolecular properties.

The first facet of this dissertation focuses on the design and synthesis of bio-inspired, thin film adhesives for dry and aqueous adhesion. Drawing inspiration from the intertidal marine mussel, Chapter II details the synthesis of adhesive networks containing a monofunctional catechol-based monomer. The inclusion of a catechol group resulted in significant improvements in adhesion on a variety of substrates. In Chapter …

Effect Of Chain Rigidity On Network Architecture And Deformation Behavior Of Glassy Polymer Networks, Kyler Reser Knowles

Dissertations

Processing carbon fiber composite laminates creates molecular-level strains in the thermoset matrix upon curing and cooling which can lead to failures such as geometry deformations, micro-cracking, and other issues. It is known strain creation is attributed to the significant volume and physical state changes undergone by the polymer matrix throughout the curing process, though storage and relaxation of cure-induced strains remain poorly understood. This dissertation establishes two approaches to address the issue. The first establishes testing methods to simultaneously measure key volumetric properties of a carbon fiber composite laminate and its polymer matrix. The second approach considers the rigidity of …

Synthesis Of A Thermally Reversible Cross-Linked System Using Electrophilic Cleavage/Functionalization Of Poly(Isobutylene-Co-Isoprene), Savannah H. Steadman

Honors Theses

Multifunctional polyisobutylenes (PIBs) are of great academic and commercial interest. Current methods to create these materials currently utilize prohibitively expensive synthetic strategies. Recently, Storey et al. reported a novel method for the synthesis of multifunctional PIB which is more commercially viable than the current methods. For this research, the material produced via this technique was utilized to create a thermally reversible crosslinked system using Diels-Alder chemistry. To achieve this, a bromide-functional polyisobutylene obtained via electrophilic cleavage and functionalization of butyl rubber was split into two portions and further functionalized. The first portion of the bromide-functional PIB was reacted with furfuryl …

An Investigation Of The Use Of Cerium And Polyhedral Oligomeric Silsesquioxanes For The Protection Of Polymeric Epoxy Compounds In The Low Earth Orbit Environment, Jessica Miriam Piness

Dissertations

Low Earth orbit presents many hazards for composites including atomic oxygen, UV radiation, thermal cycling, micrometeoroids, and high energy protons. Atomic oxygen and vacuum ultraviolet radiation are of concern for space-bound polymeric materials as they degrade the polymers used as matrices for carbon fiber composites, which are used in satellites and space vehicles due to their high strength to weight ratios. Epoxy-amine thermosets comprise a common class of matrix due to processability and good thermal attributes. Polyhedral oligomeric silsesquioxanes (POSS) have shown the ability to reduce erosion in polyimides, polyurethanes, and other polymers when exposed to atomic oxygen. The POSS …

Formation Of Nanostructured Epoxy Networks Containing Polyhedral Oligomeric Silsesquioxane (Poss) And Silica Nanoparticles, Amit K. Sharma

Dissertations

This dissertation is focused on structure-property-processing relationship studies based on well-defined polyhedral oligomeric silsesquioxane (POSS) modified epoxy networks to present a comprehensive understanding of hybrid network behavior. In this research, a monoamine functional POSS molecule is incorporated into the epoxy monomer as pendant unit to mimic common epoxy structures and then crosslinked to form well-defined epoxy hybrid networks. The POSS cages behave as nanosized pendant unit in the epoxy matrices, while the mass fraction of POSS cages is varied and the effects on physical properties are examined with respect to changes in network architecture.

A novel continuous reactor method is …

Bioinspired Design Of Wetting And Anti-Wetting Surfaces Via Thiol-Ene Photopolymerization, Li Xiong

Dissertations

Surface wettability is known to have a profound influence in both academic study and industrial application of materials. Superhydrophobic surfaces, with a static contact angle higher than 150° and a contact angle hysteresis lower than 10°, have received continued attention for their broad applications, such as self-cleaning, antifogging and frosting, and drag reduction. The continuous development of materials and approaches that used to create superhydrophobic surfaces has led to further exploration of coatings with other desirable properties such as superamphiphobicity, mechanical robustness and thermal stability.

In this work, coatings with super wetting and super anti-wetting properties were designed and fabricated …