Open Access. Powered by Scholars. Published by Universities.®
- Discipline
Articles 481 - 510 of 670
Full-Text Articles in Chemistry
Glycosylation Of 2-Nitro-1-Thioglycoside As Glycosyl Donor, Panachai Wongsrisupphakul
Glycosylation Of 2-Nitro-1-Thioglycoside As Glycosyl Donor, Panachai Wongsrisupphakul
Chulalongkorn University Theses and Dissertations (Chula ETD)
2-Nitro thioglycosides are versatile building blocks for amino sugar synthesis. Nitro moiety at C2 position acts as stable surrogate for amino group and can be converted at late state of the synthesis. In this work, chemical glycosylation of 2-nitro thioglycoside donors were investigated. 2-nitro thioglycosides were prepared from tri-O-acetyl-D-galactal which underwent functional group manipulations and nitration to obtain 2-nitrogalactal in 47% over 4 steps. Then, Michael additions of 2-nitrogalactal with various type of S-nucleophiles were performed by using NaDTC as activator to produce 2-nitrothioglycoside donors in 46–85% yield. Glycosylation between 2-nitro thioglycoside donors and methyl 2,3,4-tri-O-benzyl-α-D-glucopyranoside as glycosyl acceptor were …
Preparaton Of Selenium Nanoparticles Stabilized By Pullulan And Derivatives, Punnida Nonsuwan
Preparaton Of Selenium Nanoparticles Stabilized By Pullulan And Derivatives, Punnida Nonsuwan
Chulalongkorn University Theses and Dissertations (Chula ETD)
The inorganic/organic selenium nanoparticles (SeNPs)/pullulan derivative hybrid material was obtained using a simple and green strategy. The chemical structure of pullulan, folic acid decorated cationic pullulan (FA-CP) was designed for stabilizing SeNPs. The SeNPs stabilized by FA-CP were observed after the addition of a cysteine hydrochloride solution into the solution mixture of Na2SeO3 and FA-CP. The results suggested that the concentrations of cysteine and stabilizer were the key factors to control the shape and morphology of SeNPs. The spherical SeNP/FA-CP was found in ratio of Na2SeO3 to cysteine was 1:1. It exhibited low toxicity against normal cells while higher toxicity …
Preparation Of Palladium-Based Electrocatalysts For Direct Ethanol Fuel Cells, Thantakorn Nitaya
Preparation Of Palladium-Based Electrocatalysts For Direct Ethanol Fuel Cells, Thantakorn Nitaya
Chulalongkorn University Theses and Dissertations (Chula ETD)
This research was to investigate the effect of palladium-based catalyst and supporting materials for direct ethanol fuel cell in alkaline media. The studied variables were the secondary metal (gold, ruthenium, and tungsten), types of support (carbon Vulcan, carbon nanotubes). Regarding the secondary metal incorporation, Pd99W1/C resulted in a significant enhancement in activity and stability for ethanol and methanol electrooxidation. In contrast with glycerol oxidation, Pd99Au1/C exhibited a better activity and stability than other catalysts. With the surface functionalization of carbon nanotube support, it was clear that the acid oxidation of carbon nanotube gave a poor palladium catalytic performance for ethanol …
Direct Arylation Polymerization Of 2′-Octyl-3,4-Ethylenedioxythiophene For Donor-Acceptor Conjugated Copolymer Synthesis, Thanat Tiyasakulchai
Direct Arylation Polymerization Of 2′-Octyl-3,4-Ethylenedioxythiophene For Donor-Acceptor Conjugated Copolymer Synthesis, Thanat Tiyasakulchai
Chulalongkorn University Theses and Dissertations (Chula ETD)
Direct arylation polymerization (DArP) is a new palladium-catalyzed cross-coupling method to synthesize conjugated copolymers. This reaction can generate C-C bonds between simple arenes and dibromoarenes, without passing through organometallic intermediates. In this work, we synthesized new donor-acceptor conjugated copolymers based on 2′-octyl-3,4-ethylenedioxythiophene (OEDOT) donor coupled with 3,5-dibromo-1,2,4-triazole, 4,7-dibromo-2,1,3-benzothiadiazole, 4,7-dibromo-5,6-difluoro-2,1,3-benzothiadiazole, 4,7-dibromo-1,2,3-benzotriazole, 4,7-dibromo-2-octyl-1,2,3-benzotriazole, 1,4-dibromo-2,5-(tert-butyldimethylsilanyl oxy)benzene, 5,7-dibromothieno[3,4-b]pyrazine and 5,7-dibromo-2,3-diphenyl thieno[3,4-b]pyrazine to become polymers P1-6 and P9-10, respectively in various range of yields of 16-88%. Polymer P7 was prepared from deprotection followed by oxidation of polymer P6. These copolymers exhibited various UV-Visible absorptions with λmax values ranging from 328 to 958 nm.
Fabrication Of Superhydrophobic Gold Film On Polymer Substrates, Siriwan Boonmeewiriya
Fabrication Of Superhydrophobic Gold Film On Polymer Substrates, Siriwan Boonmeewiriya
Chulalongkorn University Theses and Dissertations (Chula ETD)
Superhydrophobic surface was fabricated by a reduction reaction between chloroauric acid (HAuCl4) and sodium formate (HCOONa) on polydimethylsiloxane (PDMS) substrate without any further surface modification. This generated gold films with superhydrophobic properties examined by water contact angle (WCA) and contact angle hysteresis measurement. Wettability of the fabricated gold film on PDMS substrate can be controlled by the deposition time which provides the WCA > 160o and it could be up to 164.41o with a contact angle hysteresis of 1.93o when the deposition time was prolonged at least 2 hours. To propose the deposition mechanism, the morphological structure and chemical characters of …
Determination Of Sugar In Non-Alcoholic Beverages Using Near Infrared Spectroscopy Combined With Chemometrics, Sureerat Makmuang
Determination Of Sugar In Non-Alcoholic Beverages Using Near Infrared Spectroscopy Combined With Chemometrics, Sureerat Makmuang
Chulalongkorn University Theses and Dissertations (Chula ETD)
The measurement of Near infrared (NIR) spectroscopy, combined with chemometric techniques, has been widely employed for quality control in food products. This study presents a methodology to optimize the calibration models, called "universal model" of NIR spectra of primary condition (glucose solutions) and maintain the accurate prediction of secondary conditions. For instance, the models were designed for determination of glucose concentration in non-alcoholic drinks. Three stages of methodology including pre-processing, feature selection and main component extraction were applied to spectral data in order to obtain the universal calibration model. The simulated NIR spectra with different noise levels were used to …
Preparation Of Polyurethane And Polyisocyanurate Foams Catalyzed By Metal Acetate-Ammonia Complexes, Benjatham Sukkaneewat
Preparation Of Polyurethane And Polyisocyanurate Foams Catalyzed By Metal Acetate-Ammonia Complexes, Benjatham Sukkaneewat
Chulalongkorn University Theses and Dissertations (Chula ETD)
Metal acetate-ammonia complex solutions, namely Cu(Amm) and Zn(Amm), were synthesized and characterized by UV-visible spectroscopy and MALDI-TOF mass spectrometry. Cu(Amm) and Zn(Amm) were used as homogeneous catalysts for accelerating gelling (urethane formation) and blowing reactions (CO2 generation) of rigid polyurethane (RPUR) and polyisocyanurate (PIR) foams. Potassium octoate solution in diethylene glycol, which was used as a trimerization catalyst, was mixed with Cu(Amm) or Zn(Amm) to give a catalyst mixture which can catalyze gelling, blowing and trimerization reactions for the preparation of PIR foams. The catalytic activity of Cu(Amm) and Zn(Amm) in gelling and blowing reactions was compared to that of …
Pdms-Silver Nanocomposite For Bendable And Stretchable Conductive Stripes, Porapak Suriya
Pdms-Silver Nanocomposite For Bendable And Stretchable Conductive Stripes, Porapak Suriya
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this research, a simple and low-cost protocol for fabricating PDMS-silver composite as flexible conductive polymer is presented. Rod-shaped silver acetate (RS-AcOAg) was synthesized and fabricated into a solvent-cast RS-AcOAg film. The film was thermally decomposed into porous silver structures at 300ºC. The thermal decomposition of RS-AcOAg film induced the formation of silver microparticles (AgNPs) on the surface of RS-AcOAg with the expense of RS-AcOAg rod. AgNPs sintered into bigger particles and turned RS-AcOAg film into porous silver film consisting of interconnected quasi-sphere silver microparticles (AgMPs). The sintered structures transformed porous silver into rigid structures and affected the electrical resistivity …
ไฮโดรจิเนชันของคาร์บอนไดออกไซด์เป็นโอเลฟินส์เบาบนตัวเร่งปฏิกิริยาเส้นใย Co-Fe/Cnt-Sio2, กนกกร พงษ์ภมร
ไฮโดรจิเนชันของคาร์บอนไดออกไซด์เป็นโอเลฟินส์เบาบนตัวเร่งปฏิกิริยาเส้นใย Co-Fe/Cnt-Sio2, กนกกร พงษ์ภมร
Chulalongkorn University Theses and Dissertations (Chula ETD)
การเผาไหม้ของเชื้อเพลิงทำให้เกิดการปล่อยแก๊สคาร์บอนไดออกไซด์ (CO2) ซึ่งแก๊สคาร์บอนไดออกไซด์นั้นเป็นสาเหตุหลักของการเกิดปรากฎการณ์เรือนกระจก (Greenhouse effect) และส่งผลกระทบมากมายต่อโลกงานวิจัยนี้จึงมีจุดประสงค์ในการศึกษาการเปลี่ยนแก๊สคาร์บอนไดออกไซด์ (CO2) เป็นสารประกอบไฮโดรคาร์บอนชนิดโอเลฟินส์บนตัวเร่งปฏิกิริยาโลหะคู่โคบอลต์และเหล็ก (Bimetallic Co-Fe) โดยใช้คาร์บอนนาโนทิวบ์ซิลิกาไฟเบอร์ (CNT-SiO2 fiber) เป็นตัวรองรับในการทำปฏิกิริยาการเติมไฮโดรเจน (H2) ของคาร์บอนไดออกไซด์แทนการใช้คาร์บอนมอนอกไซด์ (10CoFe/CNT-SiO2 fiber) โดยการเตรียมตัวเร่งปฏิกิริยาบนตัวรองรับคาร์บอนนาโนทิวบ์ซิลิกาไฟเบอร์ที่มีการปรับปรุงพื้นผิวของตัวรองรับจะให้ประสิทธิภาพที่ดีในการทำปฏิกิริยาไฮโดรจิเนชันของแก๊สคาร์บอนไดออกไซด์ และตัวเร่งปฏิกิริยาโลหะคู่ที่มีการเติมตัวสนับสนุนโพแทสเซียม (10CoFe-K/CNT-SiO2 fiber) จะช่วยเพิ่มประสิทธิภาพในการผลิตโอเลฟินส์และสารประกอบไฮโดรคาร์บอนสายโซ่ยาวซึ่งคือการสร้างพันธะของคาร์บอนนั่นเอง และจากการศึกษาภาวะที่เหมาะสมในการทำปฏิกิริยาไฮโดรจิเนชันของคาร์บอนไดออกไซด์เพื่อเพิ่มประสิทธิภาพในการผลิตโอเลฟินส์คือ ที่อุณหภูมิ 350 องศาเซลเซียส ความดัน 25 บาร์ และค่าอัตราส่วนของน้ำหนักตัวเร่งปฏิกิริยาต่ออัตราเร็วของสารป้อน (W/F) เท่ากับ 10 กรัม(ตัวเร่งปฏิกิริยา)•ชั่วโมง/โมล โดยการใช้ตัวเร่งปฏิกิริยา 10CoFe-10K/CNT-SiO2 fiber สามารถให้ผลิตภัณฑ์ที่เป็นโอเลฟินส์ได้สูงสุดและยังช่วยยับยั้งในการเกิดมีเทน ซึ่งจะให้ค่าร้อยละการเปลี่ยนแปลงของคาร์บอนไดออกไซด์เท่ากับ 40.90 ค่าร้อยละการเลือกเกิดของผลิตภัณฑ์ที่เป็นโอเลฟินส์เท่ากับ 8.79 และค่าร้อยละการเลือกเกิดของผลิตภัณฑ์ที่เป็นมีเทนเท่ากับ 58.96 และทำการศึกษาคุณลักษณะของตัวเร่งปฏิกิริยาต่างๆ
ไพโรไลซิสของน้ำมันปาล์มจากทะลายปาล์มเปล่าโดยใช้ตัวเร่งปฏิกิริยาเถ้าลอยถ่านหิน, กัณทิมา นิยะกิจ
ไพโรไลซิสของน้ำมันปาล์มจากทะลายปาล์มเปล่าโดยใช้ตัวเร่งปฏิกิริยาเถ้าลอยถ่านหิน, กัณทิมา นิยะกิจ
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีจุดมุ่งหมายเพื่อศึกษาไพโรไลซิสของน้ำมันปาล์มจากทะลายปาล์มเปล่าโดยใช้ตัวเร่งปฏิกิริยาเถ้าถ่านหิน (CFA) โดยปฏิกิริยาจะถูกดำเนินการในเครื่องปฏิกรณ์แบบแบตช์ขนาด 70 มิลลิลิตร และเถ้าลอยถ่านหินถูกแคลไซน์ที่อุณหภูมิ 600 องศาเซลเซียสเป็นเวลา 5 ชั่วโมง การออกแบบการทดลองเชิงแฟคทอเรียลสองระดับประกอบด้วย 4 ปัจจัย ได้แก่ อุณหภูมิในการทำปฏิกิริยา 420-450 องศาเซลเซียส เวลาในการทำปฏิกิริยา 30-60 นาที ปริมาณตัวเร่งปฏิกิริยาร้อยละ 1-5 (โดยน้ำหนักของน้ำมัน) และความดันไฮโดรเจน 1-5 บาร์ ถูกนำมาใช้ในการศึกษาครั้งนี้ ค่าการตอบสนองที่ทำการวิเคราะห์คือร้อยละผลได้ของผลิตภัณฑ์เชื้อเพลิงเหลวและร้อยละผลได้ของดีเซลในผลิตภัณฑ์เชื้อเพลิงเหลว มีการวิเคราะห์ทางสถิติเพื่อหาปัจจัยที่มีอิทธิพลต่อค่าการตอบสนองและเพื่อหาภาวะที่เหมาะสม องค์ประกอบของผลิตภัณฑ์เชื้อเพลิงเหลวที่ได้วิเคราะห์โดยใช้เครื่องแก๊สโครมาโทกราฟีจำลองการกลั่นและเครื่องแก๊สโครมาโทกราฟีแมสสเปกโตรมิเตอร์ตามลำดับ ภาวะที่เหมาะสมที่ได้จากโปรแกรม Design-Expert คืออุณหภูมิในการทำปฏิกิริยา 420 องศาเซลเซียส เวลาในการทำปฏิกิริยา 30 นาที ปริมาณตัวเร่งปฏิกิริยาร้อยละ 1 โดยน้ำหนัก และความดันไฮโดรเจน 1 บาร์ ซึ่งได้ผลิตภัณฑ์เชื้อเพลิงเหลวสูงสุดร้อยละ 87.98 โดยน้ำหนัก และสัดส่วนดีเซลในผลิตภัณฑ์เชื้อเพลิงเหลวสูงสุดร้อยละ 42.19 โดยน้ำหนัก จากการวิเคราะห์ทางเคมีฟิสิกส์ผลิตภัณฑ์เชื้อเพลิงเหลวที่ได้มีค่าความร้อน 40.18 เมกะจูลต่อกิโลกรัม ใกล้เคียงกับน้ำมันดีเซล และค่าความเป็นกรด 0.20 มิลลิกรัมโพแทสเซียมไฮดรอกไซด์ต่อกรัม ซึ่งมีค่าอยู่ในเกณฑ์มาตรฐานของน้ำมันดีเซล เมื่อนำไปผ่านกระบวนการกลั่นแยกและทำให้บริสุทธิ์จะสามารถนำไปใช้กับเครื่องยนต์ดีเซลได้
แบบจำลองพลวัตและระบบการควบคุมการดักจับคาร์บอนไดออกไซด์ในฟลูอิไดซ์เบดโดยใช้พลศาสตร์ของไหลเชิงคำนวณ, ชนนิกานต์ ถิระพาณิชยกุล
แบบจำลองพลวัตและระบบการควบคุมการดักจับคาร์บอนไดออกไซด์ในฟลูอิไดซ์เบดโดยใช้พลศาสตร์ของไหลเชิงคำนวณ, ชนนิกานต์ ถิระพาณิชยกุล
Chulalongkorn University Theses and Dissertations (Chula ETD)
เนื่องจากจำนวนประชากรโลกเพิ่มขึ้นและคุณภาพชีวิตที่ดีขึ้นทำให้มีความต้องการพลังงานมากขึ้น ส่งผลให้ต้องผลิตพลังงานมากขึ้นโดยเฉพาะพลังงานไฟฟ้า นำมาซึ่งการปล่อยแก๊สคาร์บอนไดออกไซด์ปริมาณมากสู่บรรยากาศเนื่องจากเชื้อเพลิงที่ใช้ผลิตไฟฟ้ายังเป็นเชื้อเพลิงฐานคาร์บอน แก๊สคาร์บอนไดออกไซด์เป็นปัจจัยหลักต่อการเปลี่ยนแปลงสภาพภูมิอากาศ ในงานวิจัยนี้ทำการพัฒนาแบบจำลองพลวัตสำหรับกระบวนการดักจับแก๊สคาร์บอนไดออกไซด์หลังกระบวนการเผาไหม้ด้วยตัวดูดซับของแข็งโซเดียมคาร์บอเนต (Na2CO3) ในไรเซอร์ของฟลูอิไดซ์เบดแบบหมุนเวียนโดยใช้โปรแกรมจำลองพลศาสตร์ของไหลเชิงคำนวณสำเร็จรูป ANSYS FLUENT จากนั้น ทำการปรับตัวแปรดำเนินการ ได้แก่ ความเร็วของแก๊สเผาไหม้ องค์ประกอบของแก๊สเผาไหม้ที่ป้อนเข้า อุณหภูมิของแก๊สเผาไหม้ที่ป้อนเข้า และอัตราการป้อนตัวดูดซับของแข็ง ประเมินผลกระทบต่อสัดส่วนแก๊สคาร์บอนไดออกไซด์ที่บริเวณทางออก ด้วยเหตุนี้ระบบควบคุมจึงเป็นสิ่งที่จำเป็นสำหรับการปรับปรุงกระบวนการดักจับแก๊สคาร์บอนไดออกไซด์ โดยในงานวิจัยนี้กำหนดให้ตัวแปรควบคุม คือ สัดส่วนแก๊สคาร์บอนไดออกไซด์ที่บริเวณทางออก และตัวแปรปรับค่าได้ คือ อัตราการป้อนตัวดูดซับของแข็ง ในขณะที่ตัวแปรรบกวน คือ ความเร็วของแก๊สเผาไหม้ สัดส่วนของแก๊สคาร์บอนไดออกไซด์ในแก๊สเผาไหม้ที่ป้อนเข้า สัดส่วนของไอน้ำในแก๊สเผาไหม้ที่ป้อนเข้า และอุณหภูมิของแก๊สเผาไหม้ที่ป้อนเข้า ซึ่งความสัมพันธ์ระหว่างตัวแปรดำเนินการต่างๆ และสัดส่วนแก๊สคาร์บอนไดออกไซด์ที่บริเวณทางออกถูกวิเคราะห์ และสร้างระบบควบคุมด้วยโปรแกรมสำเร็จรูป MATLAB จากนั้นจึงนำระบบควบคุมพีไอดีมาใช้ในแบบจำลองพลศาสตร์ของไหลเชิงคำนวณด้วยการเขียนภาษาคอมพิวเตอร์ในระบบไฟล์ประยุกต์ใช้ระบบไฟล์โลคัล (UDF) และทดสอบสมรรถนะของระบบควบคุมเมื่อตัวแปรรบกวนเปลี่ยนแปลง
ไฮโดรดีออกซิจิเนชันของน้ำมันปาล์มเป็นเชื้อเพลิงชีวภาพไฮโดรคาร์บอนบนตัวเร่งปฏิกิริยา Ni-Mo แบบไม่มีตัวรองรับ, ทิฆัมพร บุริมสิทธิกุล
ไฮโดรดีออกซิจิเนชันของน้ำมันปาล์มเป็นเชื้อเพลิงชีวภาพไฮโดรคาร์บอนบนตัวเร่งปฏิกิริยา Ni-Mo แบบไม่มีตัวรองรับ, ทิฆัมพร บุริมสิทธิกุล
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มุ่งเน้นการผลิตน้ำมันดีเซลชีวภาพสังเคราะห์ (bio-hydrogenated diesel, BHD) ซึ่งเป็นน้ำมันดีเซลที่เป็นมิตรต่อสิ่งแวดล้อมที่กำลังได้รับความสนใจเป็นเชื้อเพลิงหมุนเวียนสำหรับเครื่องยนต์ดีเซล BHD เป็นน้ำมันไบโอดีเซลรุ่นที่ 2 ที่สามารถผลิตจากการนำน้ำมันพืชทำปฏิกิริยาไฮโดรทรีทเมนต์ ในงานวิจัยนี้ศึกษาปฏิกิริยาไฮโดรดีออกซิจิเนชัน (hydrodeoxygenation, HDO) ของน้ำมันปาล์มบนตัวเร่งปฏิกิริยานิกเกิลโมลิบดินัมซัลไฟด์ (NiMoS2) แบบไม่มีตัวรองรับที่มีอัตราส่วนอะตอมของ Ni/(Ni+Mo) ที่ 0.2 ที่เตรียมด้วยวิธีไฮโดรเทอร์มัล ศึกษาผลของตัวแปรดำเนินการ เช่น เวลา อุณหภูมิ และความเข้มข้นของสารตั้งต้นที่มีต่อการเปลี่ยนแปลงของน้ำมันปาล์มและการกระจายผลิตภัณฑ์ พบว่า การเพิ่มเวลาและอุณหภูมิส่งผลให้ปฏิกิริยาดำเนินผ่านเส้นทางดีคาร์บอกซิเลชันและดีคาร์บอนิเลชัน ภายใต้ภาวะที่เหมาะสม (อุณหภูมิ 300 องศาเซลเซียส เวลา 3 ชั่วโมง และความดันไฮโดรเจนเริ่มต้น 30 บาร์) ผลได้ของผลิตภัณฑ์นอร์มัลแอลเคน C15-C18 โดยมีร้อยละผลได้ร้อยละ 81.4 โดยมวล โดยมีร้อยละการเลือกเกิดของ C15-C18 คือ ร้อยละ 23.6, 18.0, 32.0 และ 25.6 โดยมวลตามลำดับ จากการวิเคราะห์ด้วยแก๊สโครมาโทกราฟแมสสเปกโทรสโกปี พบผลิตภัณฑ์ข้างเคียงคือ แอลคีน แอลกอฮอล์ และเอสเทอร์ จากการวิเคราะห์ลักษณะสมบัติของตัวเร่งปฏิกิริยาด้วยเทคนิคต่างๆ พบว่าตัวเร่งปฏิกิริยามีลักษณะเป็นชั้น มีจำนวนขอบและมุมที่มาก และมุมของนิกเกิลที่ยื่นออกมา ส่งผลให้เกิดการเร่งปฏิกิริยาที่ดี นอกจากนั้นตัวเร่งปฏิกิริยาสามารถนำกลับมาใช้ซ้ำในไฮโดรดีออกซิจิเนชันของน้ำมันปาล์มได้อย่างน้อย 4 รอบ โดยยังมีสมรรถนะที่ดี
เส้นโค้งสมดุลของการดูดซับคาร์บอนไดออกไซด์ด้วยโพแทสเซียมคาร์บอเนตในฟลูอิไดซ์เบด, นิธิวดี อินทร์มณี
เส้นโค้งสมดุลของการดูดซับคาร์บอนไดออกไซด์ด้วยโพแทสเซียมคาร์บอเนตในฟลูอิไดซ์เบด, นิธิวดี อินทร์มณี
Chulalongkorn University Theses and Dissertations (Chula ETD)
ปัจจุบันปัญหาภาวะโลกร้อนส่งผลกระทบโดยตรงต่อโลกในหลายๆ ด้าน เช่น อุณหภูมิบรรยากาศที่สูงขึ้น ปัญหาพายุ และปัญหาภัยแล้ง โดยสาเหตุหลักมาจากการปลดปล่อยแก๊สคาร์บอนไดออกไซด์ออกสู่บรรยากาศในปริมาณมาก ดังนั้น การดักจับและกักเก็บคาร์บอนไดออกไซด์ก่อนปลดปล่อยสู่บรรยากาศจึงมีความสำคัญ สำหรับการออกแบบและการจำลองกระบวนการแยกสาร ข้อมูลสมดุลการดูดซับและจลนศาสตร์การดูดซับถือเป็นข้อมูลพื้นฐานที่มีความสำคัญและจำเป็น ในการพัฒนาและหาแบบจำลองที่บ่งบอกธรรมชาติของการดูดซับนั้นๆ ในงานวิจัยนี้ทำการศึกษาสมดุลการดูดซับและจลนศาสตร์การดูดซับคาร์บอนไดออกไซด์ของตัวดูดซับโพแทสเซียมคาร์บอเนตบนตัวรองรับแกมม่าอลูมินา โดยทำการทดลองที่อุณหภูมิ 45, 60 ,75 และ 90 องศาเซลเซียส ความดันช่วง 0-1 บาร์ ข้อมูลที่ได้จะนำมาสร้างความสัมพันธ์กับแบบจำลอง จากผลการทดลอง พบว่า แบบจำลองของซิปส์เป็นแบบจำลองที่เหมาะสมที่สุดในการอธิบายสมดุลการดูดซับ การดูดซับเกิดขึ้นบนตัวดูดซับที่มีความไม่เป็นเนื้อเดียวกัน เนื่องจากการปรับปรุงตัวดูดซับด้วยการอิมเพรกบนตัวรองรับแกมม่าอลูมินา และแบบจำลองของอาฟรามี เป็นแบบจำลองที่เหมาะสมในการอธิบายจลนศาสตร์การดูดซับที่สุด บ่งบอกว่ากระบวนการดูดซับมีความซับซ้อน กล่าวคือเกิดการดูดซับเชิงกายภาพร่วมกับการดูดซับเชิงเคมี และมีกลไกการเกิดปฏิกิริยามากกว่าหนึ่งกลไก นอกจากนี้ยัง พบว่า ภาวะที่ดีที่สุดในการดูดซับคาร์บอนไดออกไซด์คือที่ ความดัน 1 บาร์ อุณหภูมิ 60 องศาเซลเซียส
Physical Properties Of Propylene/Propane Mixtures In Zeolitic Imidazolate Frameworks By Dftb And Molecular Dynamics Simulation, Benjawan Kaewruksa
Physical Properties Of Propylene/Propane Mixtures In Zeolitic Imidazolate Frameworks By Dftb And Molecular Dynamics Simulation, Benjawan Kaewruksa
Chulalongkorn University Theses and Dissertations (Chula ETD)
Zeolitic imidazolate frameworks (ZIFs) are fascinating porous materials which were widely utilized for gas adsorptions, separation and storage due to its high thermal and chemical stability. In this work, adsorptions of propane and propylene in ZIF−8 and ZIF−67 pores were studied under the periodic boundary condition based on the SCC−DFTB method. Six and eleven adsorption configurations of propane and propylene molecules can be observed in the ZIF−8 pore, whereas only four adsorption configurations in the ZIF−67 pore were found. Based on the most stable configurations, the adsorption energies of propane both ZIF−8 pore and ZIF−67 pore are lower than propylene. …
Fluorescent Probes For Detection Of Aldehyde Compounds, Piyanan Pranee
Fluorescent Probes For Detection Of Aldehyde Compounds, Piyanan Pranee
Chulalongkorn University Theses and Dissertations (Chula ETD)
Long-chain aldehyde compounds such as hexanal, heptanal, octanal and nonanal are regarded as potential biomarkers of many lung cancer disease and served as the important quality indicators of fat and oil products. As advantage of the hydrophobic tails of hydrocarbon chain and hydrophilic head of aldehyde, we expected that long-chained aldehydes might act as the induced-fit surfactants to form the completely self-assembling organized nanomicelle. In this research, the nanomicellar probes for specific long-chain aldehyde compounds have been achieved in the challenge concept such that among aldehydes especially long-chain aldehyde compounds, would react with Naph-NH2 to form complete micelle-like particles via …
Styryl-Bodipy Fluorescent Sensors For Reactive Oxygen Species Detection In Cells, Suthikorn Jantra
Styryl-Bodipy Fluorescent Sensors For Reactive Oxygen Species Detection In Cells, Suthikorn Jantra
Chulalongkorn University Theses and Dissertations (Chula ETD)
Fluorescent probes are great tools for visualization and imaging of reactive oxygen species (ROS) in living cells. Although several probes perform well with green emission, however, to maximize light penetration for tissue imaging and minimize interference from auto-fluorescence, a probe with longer wavelength is desirable. In this study, three new boron dipyrromethene (BODIPY)-based fluorescent probes SB1, SB2 and SB4 have been developed for detection of ROS. Each probe has two styryl groups anchored to the BODIPY pyrrole rings to extend the emission wavelength into the red region (634–662 nm). Among them, we found that SB2 containing electron-rich p-hydroxyl styryl groups …
Oxidized Carbon Particles From Styrene, Titiporn Sansureerungsikul
Oxidized Carbon Particles From Styrene, Titiporn Sansureerungsikul
Chulalongkorn University Theses and Dissertations (Chula ETD)
It has been reported the spherical shape of oxidized carbon nanoparticulates shows higher ability to penetrate phospholipid bilayer membrane than tubular and sheet shapes. However, the effect of the particle size on this membrane penetration ability have never been investigated. In this work, we synthesized various sizes of oxidized carbon spheres through a four steps process. Firstly, we adjusted the surfactants and styrene concentrations to prepare polystyrene of various sizes. Then, the polystyrene particles of selected sizes were hypercrosslinked via Frieldel-Craft alkylation reaction. After that, hypercrosslinked polystyreneparticles were pyrolyzed under N2 atmosphere to obtain carbon nanospheres of various sizes. The …
Molecular Dynamic Simulations On Inclusion Complexes Of Alpha-Mangostin With Beta-Cyclodextrin And Derivatives In Phospholipid Bilayer, Wiparat Hotarat
Molecular Dynamic Simulations On Inclusion Complexes Of Alpha-Mangostin With Beta-Cyclodextrin And Derivatives In Phospholipid Bilayer, Wiparat Hotarat
Chulalongkorn University Theses and Dissertations (Chula ETD)
Alpha-mangostin (MGS), a traditional Thai medicine, exhibits pharmacological activities such as anti-oxidant, anticancer, antibacterial, and anti-inflammatory properties. However, the low solubility of MGS is the major problem for the use in pharmaceutical industry. To enhance the solubility of this compound, the encapsulation of MGS by the three types of cyclodextrin including beta-cyclodextrin (BCD) 2,6-dimethyl-b-cyclodextrin (DMBCD) as well as 2-hydroxypropyl-b-cyclodextrin (HPBCD) was investigated. Based on molecular dynamic (MD) simulations, the results show the existence of several association complexes where the interaction of MGS on exterior CDs prior to a formation of inclusion complex. The van der Waals interaction (vdW) is the …
Determination Of Organic Acid Preservatives In Shrimp Paste By Headspace Solid-Phase Microextraction Combined With Gas Chromatography, Nuttanee Tungkijanansin
Determination Of Organic Acid Preservatives In Shrimp Paste By Headspace Solid-Phase Microextraction Combined With Gas Chromatography, Nuttanee Tungkijanansin
Chulalongkorn University Theses and Dissertations (Chula ETD)
Organic acids, which are benzoic acid, sorbic acid and propionic acid, are the most common preservatives used in foods and have been regulated the usage. Shrimp paste, called Kapi in Thai, is a fermented food that used in many Thai dishes. Owing to a complex matrix in shrimp paste, sample preparation is required to determine the amount of organic acid preservatives in shrimp paste. In this work, headspace solid-phase microextraction (HS-SPME) was developed for extraction of organic acid preservatives in shrimp pastes and analyzed by gas chromatography with flame ionization detector (GC-FID). The 85 µm polyacrylate coated fiber was used …
Paper-Based Analytical Device For Determination Of Triglycerides, Yolthida Kantapa
Paper-Based Analytical Device For Determination Of Triglycerides, Yolthida Kantapa
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this work, a paper-based analytical device (PAD) together with enzymatic reactions was developed for determination of triglycerides using colorimetric detection. The method was based on the enzymatic reactions between triglycerides and enzymes (lipase, glycerol kinase and glycerol-3-phosphate oxidase). Hydrogen peroxide which was generated from the enzymatic reactions is reduced by chromogenic substrates which were 3-methyl-2-benzothiazolinone hydrazone (MBTH) and 3-(dimethylamino)benzoic acid (DMAB) in the presence of peroxidase to produce an indamine dye. The blue color intensity of indamine dye is directly proportional to triglycerides concentration. For quantitative analysis, the interfering effect of ascorbic acid in real samples was eliminated using …
Positively Charged Particles From Amphiphilic Chitosan For Plasmid Dna Delivery, Tinnakorn Phuangkaew
Positively Charged Particles From Amphiphilic Chitosan For Plasmid Dna Delivery, Tinnakorn Phuangkaew
Chulalongkorn University Theses and Dissertations (Chula ETD)
Amphiphilic chitosan derivatives have been well regarded as potential non-viral vectors for gene delivery. Their hydrophobic entities could promote cell permeability whereas their hydrophilic entities especially those carrying positive charges can interact with the negatively charged phosphate groups of DNA. Here in this research, a series of amphiphilic chitosan derivatives were synthesized. Linear hydrocarbon of two different chain length: hexyl (C6) and dodecyl (C12) were substituted at amino groups of chitosan via reductive alkylation with hexanal and dodecanal and yielded two hydrophobized chitosan derivatiives, hexyl chitosan (HCS) and dodecyl chitosan (DCS), respectively. Phthaloyl chitosan (PhCS) was also prepared as another …
Reduced Graphene Oxide-Modified Screen-Printed Carbon Electrode For Determination Of Homocysteine Using Catechol, Suchapa Naranaruemol
Reduced Graphene Oxide-Modified Screen-Printed Carbon Electrode For Determination Of Homocysteine Using Catechol, Suchapa Naranaruemol
Chulalongkorn University Theses and Dissertations (Chula ETD)
Homocysteine (Hcy), also known as 2-amino-4-mercaptobutyric acid, is a biomarker that is directly associated with an increased risk of cardiovascular diseases (CVDs). In this work, catechol (CA), which is redox active, had been used as an electron transfer mediator to facilitate the oxidation of Hcy. Typically, CA was first electrochemically immobilized onto the surface of screen-printed carbon electrode; however, the obtained CA-functionalized electrode did not show the electrocatalytic activity towards the detection of Hcy. Therefore, the deter– mination of Hcy was investigated in the solution containing CA using differential pulse voltammetry (DPV) at the reduced graphene oxide-modified screen-printed carbon electrode …
Modification Of Screen-Printed Carbon Electrode With Mxene/Conductive Polymer Composites For Hydrogen Peroxide Detection, Supawat Neampet
Modification Of Screen-Printed Carbon Electrode With Mxene/Conductive Polymer Composites For Hydrogen Peroxide Detection, Supawat Neampet
Chulalongkorn University Theses and Dissertations (Chula ETD)
MXene (Ti3C2), a two-dimensional material consisting of transition metal carbides, nitrides or carbonitrides was prepared by etching method for modification electrode of a novel nanocomposites consisting of platinum nanoparticles (PtNPs) and polyaniline (PANI) via electrodeposition and electropolymerization, respectively. The fabricated MXene/PANI/PtNPs nanocomposite modified on surface screen-printed carbon electrode (SPCE) were characterized by scanning electron microscopy SEM) with energy dispersive X-rays spectroscopy (EDX), X-ray powder diffraction (XRD), and transmission electron microscopy (TEM) to verify the presence of nanocomposite materials and indicate their morphologies. This electrode was applied for the detection of hydrogen peroxide (H2O2), which is a common electroactive product from …
Synthesis And Biological Activities Of Halogenated Chalcone-Based Pyra, Dinh Phuoc Nguyen
Synthesis And Biological Activities Of Halogenated Chalcone-Based Pyra, Dinh Phuoc Nguyen
Chulalongkorn University Theses and Dissertations (Chula ETD)
Twenty new 1,3,5-trisubstituted pyrazoline derivatives have been synthesized from chalcones and acylhydrazides in two steps. In the first step, chalcones were prepared by treatment of various acetophenones with different substituted benzaldehydes by Claisen-Schmidt condensation. In the second step, pyrazoline derivatives were synthesized by conducting the reaction of chalcones with acylhydrazides in acetonitrile at 67 °C in the presence of triazabicyclodecene as a catalyst. The synthesized compounds were identified by 1H, 13C NMR and HRMS spectral data and were evaluated for their antibacterial, anticancer and tyrosinase inhibitory activities. In antibacterial and tyrosinase inhibitory activities, most of pyrazoline derivatives showed inactive properties. …
ผลของสารลดแรงตึงผิวต่อการเตรียมตัวเร่งปฏิกิริยา Ptco/C สําหรับปฏิกิริยารีดักชันของออกซิเจน ในเซลล์เชื้อเพลิงพีอีเอ็ม, ปาณิศา ปราบ ณ ศักดิ์
ผลของสารลดแรงตึงผิวต่อการเตรียมตัวเร่งปฏิกิริยา Ptco/C สําหรับปฏิกิริยารีดักชันของออกซิเจน ในเซลล์เชื้อเพลิงพีอีเอ็ม, ปาณิศา ปราบ ณ ศักดิ์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ศึกษาผลของสารลดแรงตึงผิวที่มีต่อตัวเร่งปฏิกิริยา PtCo/C สำหรับปฏิกิริยารีดักชันของออกซิเจนในเซลล์เชื้อเพลิงพีอีเอ็ม ซึ่งสารลดแรงตึงผิวที่ใช้ในการทดลองประกอบด้วย สารลดแรงตึงผิวชนิดประจุบวก (CTAB), ชนิดประจุลบ (SDS), และชนิดไม่มีประจุ (Triton X-100) โดยทำการเตรียมตัวเร่งปฏิกิริยา PtCo/C ร้อยละ 20 โดยน้ำหนัก ผลการทดลองพบว่าตัวเร่งปฏิกิริยาที่ใช้ CTAB ความเข้มข้น 0.004 โมลต่อลิตร ให้พื้นที่ผิวในการเกิดปฏิกิริยาเคมีไฟฟ้าสูงที่สุด นอกจากนี้การปรับปรุงตัวเร่งปฏิกิริยาด้วยความร้อนที่อุณหภูมิ 600 องศาเซลเซียส สามารถเพิ่มพื้นที่ผิวในการเกิดปฏิกิริยาและช่วยลดขนาดอนุภาคของตัวเร่งปฏิกิริยาลงได้ เนื่องจากการปรับปรุงด้วยความร้อนจะกำจัดสารลดแรงตึงผิวที่บดบังบริเวณการเกิดปฏิกิริยา การศึกษาเสถียรภาพของตัวเร่งปฏิกิริยาในสารละลายกรดซัลฟิวริกที่อิ่มตัวด้วยไนโตรเจน ความเข้มข้น 0.5 โมลต่อลิตร พบว่า CTAB ความเข้มข้น 0.004 โมลต่อลิตร มีเสถียรภาพสูงที่สุด รองลงมาเป็น Triton X-100 และ SDS ตามลำดับ ซึ่งเป็นผลมาจากปริมาณพื้นที่ผิวในการเกิดปฏิกิริยาของตัวเร่งปฏิกิริยา ส่วนของการทดสอบกัมมันตภาพสำหรับปฏิกิริยารีดักชันของออกซิเจนในสารละลายกรดที่อิ่มตัวด้วยออกซิเจนและเซลล์เชื้อเพลิงพีอีเอ็มแบบเซลล์เดี่ยวภายใต้ภาวะไฮโดรเจน/ออกซิเจน ที่อุณหภูมิ 60 องศาเซลเซียส ความดันบรรยากาศ พบว่า Triton X-100 ความเข้มข้น 0.001 โมลต่อลิตร ให้กัมมันตภาพในสารละลายกรดและเซลล์เชื้อเพลิงพีอีเอ็มแบบเซลล์เดี่ยวสูงที่สุด
Carbon Dioxide Capture On Nitrogen-Doped Carbon Nanoparticle Derived From Aromatic Compounds Via Solution Plasma And Nitridation, Phuwadej Pornaroontham
Carbon Dioxide Capture On Nitrogen-Doped Carbon Nanoparticle Derived From Aromatic Compounds Via Solution Plasma And Nitridation, Phuwadej Pornaroontham
Chulalongkorn University Theses and Dissertations (Chula ETD)
The carbon dioxide (CO2) adsorption on nanocarbon (C), oxygen-doped nanocarbon synthesized from benzene and a mixture of benzene and metal working fluid (MWF), respectively, via solution plasma process (SPP) have been revealed in this study. Firstly, they showed low CO2 adsorption capacity at 25 °C. However, their capacities were enhanced by nitridation under ammonia atmosphere at high temperature. The maximum CO2 adsorption capacity of 1.63 mmol g-1 was achieved on nitrogen-oxygen-codoped nanocarbon obtained from SPP discharging a mixture containing 15 vol% MWF nitrided at 800 °C (noC15(800)). The characterizations revealed that the micropososity and nitrogen functionality on the adsorbent are …
Computational Fluid Dynamics Of Fluid Transport And Deposition Of Particles Under Unsteady Flow In Human Fluid System, Ratchanon Piemjaiswang
Computational Fluid Dynamics Of Fluid Transport And Deposition Of Particles Under Unsteady Flow In Human Fluid System, Ratchanon Piemjaiswang
Chulalongkorn University Theses and Dissertations (Chula ETD)
Computational fluid dynamics has been widely used to investigate flow phenomena in many different applications. This study focuses on the development of computational fluid dynamic model in biomedical applications, including the flow within human respiratory system and the flow within human circulating system. For the model of respiratory system, electrostatic charge model was coupled, and the effect of breathing frequency was investigated. The accomplishment of the study will gain better understanding of the hydrodynamics when applying the electrostatic field, and will use to identify the potential aerosol deposition location. The aerosol properties and morphologies were also considered their effect on …
Development Of Optical Sensor For Detection Of Chloride Ions And Electrochemical Sensor For Detection Of Clinical Indicators, Abdulhadee Yakoh
Development Of Optical Sensor For Detection Of Chloride Ions And Electrochemical Sensor For Detection Of Clinical Indicators, Abdulhadee Yakoh
Chulalongkorn University Theses and Dissertations (Chula ETD)
This dissertation concentrated on the development of nanomaterials-based miniaturized platforms for the detection of some important compounds/indicators from environmental, pharmaceutical, and clinical application. This dissertation can be classified into two main parts: (1) development of nanomaterials-based miniaturized platforms for optical sensing application, and (2) development of nanomaterials-based miniaturized platforms for electrochemical sensing applications. In the first part, two sub-sections were discussed. For the first sub-section, the paper-based colorimetric sensor for chloride ion determination using silver nanoprisms was developed. Using a smartphone as an optical readout, the color change from the oxidative etching of the silver nanoprisms to the silver nanospheres …
Development Of Sr₂Fetio[₆-Delta] Electrode For Solid Oxide Fuel Cell, Ausa Potong
Development Of Sr₂Fetio[₆-Delta] Electrode For Solid Oxide Fuel Cell, Ausa Potong
Chulalongkorn University Theses and Dissertations (Chula ETD)
Sr₂FeTi₁-x(Nb,V)xO₆ (x=0.05-0.50) double perovskites have been synthesized by the substitution of Nb and V on Ti sites of Sr₂FeTiO₆ (SFT) and tested as electrode for intermediate temperature solid oxide fuel cell (IT-SOFC). The XRD analyses indicated Sr₂FeTi₀.₉₅Nb₀.₀₅O₆ and Sr₂FeTi₀.₉₅V₀.₀₅O₆ were pure and the impurities, Sr(FeNb) ₀.₅O₃ and Sr3(VO4) ₂, were found with the increasing of Nb and V contents in SFT. By small addition of Nb and V in SFT, the electrical conductivity and electrochemical property of SFT was improved. Among the various oxide examined, Sr₂FeTi₀.₉₅Nb₀.₀₅O₆ and Sr₂FeTi₀.₉₅V₀.₀₅O₆ showed the highest electrical conductivity of 2.44 and 3.93 S cm⁻¹, respectively, …
Carbon Sorbent Reinforced Hollow Fiber Membrane Microextraction For Determination Of Trace Polar Organic Compounds, Chanatda Worawit
Carbon Sorbent Reinforced Hollow Fiber Membrane Microextraction For Determination Of Trace Polar Organic Compounds, Chanatda Worawit
Chulalongkorn University Theses and Dissertations (Chula ETD)
This work presents a proof of concept that hollow fiber liquid phase microextraction reinforced with carbon nanomaterials would improve the extraction efficiency of small and relatively polar organic compounds. Several types of carbon sorbents such as graphite, graphene, carbon nanofiber were studied. In research I, the hollow fiber membrane reinforced with graphite was developed for liquid phase microextraction of trihalomethanes in water samples. Parameters affecting extraction efficiency including organic solvent as supported liquid membrane, amount of loaded graphite and extraction time were investigated and optimized. The working range of 0.2-120 µg L-1 was obtained in 10 min extraction with good …