Open Access. Powered by Scholars. Published by Universities.®
- Discipline
Articles 301 - 330 of 670
Full-Text Articles in Chemistry
Catalytic Conversion Of Chitin To Lactic Acid In Hot-Compressed Water, Kodchakon Kun-Asa
Catalytic Conversion Of Chitin To Lactic Acid In Hot-Compressed Water, Kodchakon Kun-Asa
Chulalongkorn University Theses and Dissertations (Chula ETD)
Chitin is the second most available polysaccharide after cellulose. Chitin and N-acetyl-D-glucosamine polysaccharide, can be converted to valuable products by using homogeneous catalysis, most of the chitin generated by food processing is treated as industrial waste. For chitin conversion to useful chemicals has been investigated less than cellulose conversion. Therefore, in this research, chitin conversion was investigated. The result was divided into four part. The first part, the result showed that ball milled pretreatment could increase the conversion of chitin, which indicated that the crystallinity of the chitin had been reduced by the ball milled pretreatment. In the second part, …
Production Of Bio-Jet Fuel From Palm Fatty Acid Distillate Over Teos-Modified Nipd/Zsm-5 Catalysts, Umbon Boonsard
Production Of Bio-Jet Fuel From Palm Fatty Acid Distillate Over Teos-Modified Nipd/Zsm-5 Catalysts, Umbon Boonsard
Chulalongkorn University Theses and Dissertations (Chula ETD)
Jet fuels are mainly derived from the refining of petroleum feedstock which has a negative impact to the environment as it emits greenhouse gases (GHG). Therefore, the development of an alternative and renewable jet fuel is an imminent concern of the aviation industry. One of the alternative jet fuel feedstocks is palm fatty acid distillate (PFAD) due to its relatively low cost. Bio-jet fuel can be produced via three reactions including deoxygenation, isomerization, and cracking. In this study, the bimetallic NiPd supported on ZSM-5 with various Si/Al ratios (23, 50, and 280) and modified ZSM-5 by TEOS were characterized by …
Structure And Morphology Of Magnesium Channel By Coarse-Grained Monte Carlo And Molecular Dynamics Simulations, Warin Rangubpit
Structure And Morphology Of Magnesium Channel By Coarse-Grained Monte Carlo And Molecular Dynamics Simulations, Warin Rangubpit
Chulalongkorn University Theses and Dissertations (Chula ETD)
Coarse-grained (CG) models have become a powerful tool for studying biomolecular complex systems with a wide range of potential applications such as large-scale protein motions, protein folding, self-assembly etc. Simulating such behaviors requires time scales which are not practically possible in all-atomistic simulations. This study presents a strategy for the application of CG simulations to investigate structural and morphological properties of cobalt-resistant magnesium channel (CorA) from Thermotoga maritima. Magnesium (Mg2+) plays a crucial function in a variety of physiological processes. The deficiency of magnesium can increase the risk of several health problems, for instance, diabetes, cardiovascular disease and osteoporosis. The …
ตัวเร่งปฏิกิริยา Ni-Mo แบบไม่มีตัวรองรับและมีตัวรองรับสำหรับไฮโดรทรีตติงของน้ำมันปาล์มเป็นเชื้อเพลิงชีวภาพ : สมรรถนะและการนำมาใช้ซ้ำ, พจวรรณ เอี่ยมศิริ
ตัวเร่งปฏิกิริยา Ni-Mo แบบไม่มีตัวรองรับและมีตัวรองรับสำหรับไฮโดรทรีตติงของน้ำมันปาล์มเป็นเชื้อเพลิงชีวภาพ : สมรรถนะและการนำมาใช้ซ้ำ, พจวรรณ เอี่ยมศิริ
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้เป็นการศึกษาไฮโดรทรีตติงของน้ำมันปาล์มบนตัวเร่งปฏิกิริยานิกเกิลโมลิบดีนัมแบบไม่มีตัวรองรับและมีตัวรองรับ ตัวแปรที่ศึกษาคือ ชนิดของตัวเร่งปฏิกิริยา ความเข้มข้นของสารตั้งต้น และระยะเวลาในการทำปฏิกิริยา จากการทดลองพบว่า ผลิตภัณฑ์หลักคือ สารประกอบนอร์มัลแอลเคน n-C14, n-C15, n-C16, n-C17 และ n-C18 การเพิ่มความเข้มข้นของสารตั้งต้นส่งผลให้ปฏิกิริยาไปทางดีคาร์บอกซิเลชันและดีคาร์บอนิลเลชัน การเพิ่มเวลาส่งผลให้ปฏิกิริยาไปทางไฮโดรดีออกซิจิเนชันมากกว่าดีคาร์บอกซิเลชันและดีคาร์บอนิลเลชัน ตัวเร่งปฏิกิริยานิกเกิลโมลิบดีนัมแบบไม่มีตัวรองรับ (0.2-NiMoS2) ซึ่งเตรียมจากการสลายตัวด้วยความร้อนมีประสิทธิภาพสูงสุด ภายใต้สภาวะที่เหมาะสม คือ อุณหภูมิ 300 องศาเซลเซียส ความดันไฮโดรเจนเริ่มต้น 40 บาร์ เวลา 3 ชั่วโมง ความเข้มข้นของสารตั้งต้นร้อยละ 10 โดยน้ำหนักของสารละลาย และอัตราส่วนของตัวเร่งปฏิกิริยาต่อสารตั้งต้นที่ 0.1 (w/w) ให้ร้อยละผลได้ของ แอลเคนทั้งหมด (n-C14-C18) สูงสุดที่ 67.0 โดยน้ำหนัก ในส่วนของตัวเร่งปฏิกิริยานิกเกิลโมลิบดีนัมแบบมีตัวรองรับแกมมาอะลูมินา (NiMoS2/Al2O3) ที่เตรียมจากการสลายตัวด้วยความร้อน; (H-NiMoS2/Al2O3) ที่ปริมาณ Al2O3 ร้อยละ 20 มี HDO แอกทีวิตีดี ภายใต้สภาวะที่เหมาะสม คือ อุณหภูมิ 300 องศาเซลเซียส ความดันไฮโดรเจนเริ่มต้น 50 บาร์ เวลา 3 ชั่วโมง ความเข้มข้นของสารตั้งต้นร้อยละ 5 โดยน้ำหนักของสารละลาย และอัตราส่วนของตัวเร่งปฏิกิริยาต่อสารตั้งต้นที่ 0.15 (w/w) ให้ร้อยละผลได้ของแอลเคน C14-C18 ร้อยละ 55.4 สูงที่สุด นอกจากนี้ตัวเร่งปฏิกิยา 0.2-NiMoS2 และ H-NiMoS2/Al2O3-0.2 สามารถนำกลับมาใช้ซ้ำในไฮโดรทรีตติงของน้ำมันปาล์มได้อย่างน้อย 3 รอบ แสดงให้เห็นว่าตัวเร่งปฏิกิริยายังมีประสิทธิภาพในการใช้งานได้นาน
การผลิตไฮโดรเจนโดยไพโรไลซิสร่วมกับรีฟอร์มิงด้วยไอน้ำของพลาสติกและกลีเซอรอลโดยใช้ตัวเร่งปฏิกิริยา Ni/Al2o3, พัชรพร วิบูลย์วิมลรัตน์
การผลิตไฮโดรเจนโดยไพโรไลซิสร่วมกับรีฟอร์มิงด้วยไอน้ำของพลาสติกและกลีเซอรอลโดยใช้ตัวเร่งปฏิกิริยา Ni/Al2o3, พัชรพร วิบูลย์วิมลรัตน์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีจุดประสงค์เพื่อศึกษาการผลิตไฮโดรเจนโดยไพโรไลซิสร่วมกับรีฟอร์มิงด้วยไอน้ำของพลาสติกและกลีเซอรอลโดยใช้ตัวเร่งปฏิกิริยานิกเกิล/อลูมินา การทดลองนี้ถูกดำเนินการในเครื่องปฏิกรณ์แบบเบดนิ่งชนิดสองขั้น ในส่วนแรกศึกษาผลของตัวเร่งปฏิกิริยานิกเกิล/อลูมินาที่ส่งผลต่อไพโรไลซิสร่วมกับรีฟอร์มิงด้วยไอน้ำในการผลิตไฮโดรเจน โดยเทียบกรณีไม่มีตัวเร่งปฏิกิริยานิกเกิล/อลูมินา จากผลการทดลองพบว่า การเติมตัวเร่งปฏิกิริยานิกเกิล/อลูมินา ส่งผลทำให้องค์ประกอบและผลได้ของไฮโดรเจนมีค่าสูงขึ้นอย่างชัดเจน และให้องค์ประกอบและผลได้ของมีเทนและคาร์บอนมอนอกไซด์ที่ลดลง ส่วนที่สองศึกษาผลของอุณหภูมิรีฟอร์มิงที่ 700, 750 และ 800 องศาเซลเซียส โดยใช้ตัวเร่งปฏิกิริยานิกเกิล/อลูมินา ภายใต้สภาวะการดำเนินงานเดียวกัน สำหรับกรณีที่ป้อนกลีเซอรอลหรือพลาสติกเดี่ยว พบว่าผลได้ของแก๊สผลิตภัณฑ์รวมมีแนวโน้มเพิ่มขึ้นตามอุณหภูมิรีฟอร์มิงที่สูงขึ้น และที่อุณหภูมิรีฟอร์มิง 750 องศาเซลเซียส มีผลได้ของไฮโดรเจนสูงสุดสำหรับกรณีที่ป้อนกลีเซอรอลร่วมกับชนิดของพลาสติกที่แตกต่างกัน จึงถือเป็นอุณหภูมิที่เหมาะสมสำหรับกระบวนการไพโรไลซิสร่วมกับรีฟอร์มิงด้วยไอน้ำของพลาสติกและกลีเซอรอล และส่วนสุดท้ายศึกษาผลของการใช้พลาสติกที่แตกต่างกันสามชนิด ได้แก่ พอลิเอทิลีน, พอลิโพรพิลีนและพอลิสไตรีน จากผลการทดลองที่ได้พบว่าการผลิตไฮโดรเจนจากกลีเซอรอลร่วมกับพอลิเอทิลีนและกลีเซอรอลร่วมกับพอลิสไตรีนมีแนวโน้มที่สูงใกล้เคียงกัน
การหาอุณหภูมิที่เหมาะสมที่สุดของการรีดคอมพาวนด์หน้ายางและวัลคาไนเซชัน, พรทิพา ประสงค์เงิน
การหาอุณหภูมิที่เหมาะสมที่สุดของการรีดคอมพาวนด์หน้ายางและวัลคาไนเซชัน, พรทิพา ประสงค์เงิน
Chulalongkorn University Theses and Dissertations (Chula ETD)
กระบวนการหลักของการผลิตยางหล่อดอกคือกระบวนการคงรูปยาง ซึ่งเป็นส่วนสำคัญที่ส่งผลต่อประสิทธิภาพ การผลิตยางหล่อดอก งานวิจัยนี้มีเป้าหมายเพื่อหาอุณหภูมิการอัดรีดยางคอมพาวนด์ที่เหมาะสมในการคงรูปยางสำหรับการผลิตในโรงงาน และศึกษาสมบัติของยางที่ผ่านการคงรูปที่อุณหภูมิแตกต่างกันที่ 140 150 และ 160 องศาเซลเซียส โดยให้มีระยะเวลาการเก็บยางคอมพาวนด์ก่อนคงรูปเพื่อจำลองการเก็บรักษากรีนไทร์เป็นเวลา 1 5 และ 10 วัน ก่อนนำไปเข้าสู่กระบวนการคงรูปยางเพื่อให้ได้ระยะเวลาที่เหมาะสมในการจัดเก็บ ทดสอบหาค่าความหนืด หาปริมาณการเกิดเจลในยาง พฤติกรรมการคงรูปชองยาง และ ค่าความหนาแน่นการเชื่อมขวางของยาง รวมไปถึงสมบัติทางกลโดยการหาค่าการต้านทานแรงดึง ค่าการยืดตัว ณ จุดขาด และค่ามอดุลัส จากผลการทดสอบแสดงให้เห็นว่าระยะเวลาสกอร์ช และระยะเวลาการคงรูปยางลดลงเมื่อเพิ่มอุณหภูมิการคงรูปและระยะเวลาในการเก็บยางคอมพาวนด์ก่อนการคงรูป ค่าการต้านทานแรงดึงแปรผันตามอุณหภูมิการคงรูป ค่าความหนาแน่นการเชื่อมขวางลดลงเมื่ออุณหภูมิการอัดรีดและอุณหภูมิการคงรูปยางคอมพาวนด์เพิ่มขึ้น เช่นเดียวกับค่าความต้านทางแรงดึงและค่ามอดุลัสที่ 300 % อย่างไรก็ตามการใช้อุณหภูมิที่สูงมากในการคงรูปยางส่งผลทำให้ยางสมบัติทางกลที่ต่ำ ได้ผลผลิตยางที่มีความแข็งแรงทนทานต่ำ ต้องใช้พลังงานไอน้ำในการให้ความร้อนสูง และสิ้นเปลืองเบลดเดอร์ ดังนั้นอุณหภูมิการอัดรีดยางคอมพาวนด์ที่ 50 องศาเซลเซียสและอุณหภูมิการคงรูปยางที่ 150 องศาเซลเซียส เป็นอุณหภูมิที่เหมาะสมที่สุดที่จะให้ระยะเวลาการคงรูปที่สั้นและยังคงคุณสมบัติทางกลของยางคอมพาวนด์ที่ดีซึ่งจำเป็นต่อการปรับปรุงกระบวนการผลิตในโรงงานผลิตยางหล่อดอกเพื่อที่จะบรรลุความต้องการของลูกค้าในอนาคต
ผลของเอทิลีน-ออกทีนโคพอลิเมอร์และโวลลาสโทไนต์ต่อสมบัติของไนลอน 6, บุษยา วิลาวรรณ
ผลของเอทิลีน-ออกทีนโคพอลิเมอร์และโวลลาสโทไนต์ต่อสมบัติของไนลอน 6, บุษยา วิลาวรรณ
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ พอลิเมอร์ผสมของไนลอน 6 กับเอทิลีน-ออกทีนโคพอลิเมอร์และเอทิลีน-ออกทีนโค พอลิเมอร์กราฟต์มาเลอิกแอนไฮไดรด์ ได้ถูกเตรียมด้วยกระบวนการผสมแบบหลอมเหลวโดยใช้เครื่องอัดรีดแบบสกรูคู่และขึ้นรูปชิ้นทดสอบด้วยเครื่องฉีดแบบ เพื่อศึกษาเปรียบเทียบสมบัติทางกายภาพ สมบัติเชิงกล สมบัติทางความร้อน และสัณฐานวิทยา พบว่าความทนแรงกระแทกของพอลิเมอร์ผสมไนลอน 6/เอทิลีน-ออกทีน โคพอลิเมอร์ทุกอัตราส่วนมีค่าต่ำกว่าไนลอน 6 ล้วน ทั้งที่อุณหภูมิ 23 องศาเซลเซียส และ -30 องศาเซลเซียส และมีค่าลดลงเมื่อปริมาณเอทิลีน-ออกทีนโคพอลิเมอร์เพิ่มขึ้น เนื่องจากความไม่เข้ากันของพอลิเมอร์ผสม ในขณะที่พอลิเมอร์ผสมไนลอน 6/เอทิลีน-ออกทีนโคพอลิเมอร์กราฟต์มาเลอิกแอนไฮไดรด์ทุกอัตราส่วนมีค่าความทนแรงกระแทกสูงกว่าไนลอน 6 และเพิ่มขึ้นตามปริมาณของเอทิลีน-ออกทีนโคพอลิเมอร์กราฟต์มาเลอิกแอนไฮไดรด์ เนื่องจากการเกิดอันตรกิริยาที่ดีของพันธะไฮโดรเจนระหว่างหมู่อะมิโนกับหมู่แอนไฮไดรด์ในเมทริกซ์ของไนลอน 6 สอดคล้องกับภาพที่ได้จากกล้องจุลทรรศน์อิเล็กตรอนแบบส่องกราด นอกจากนี้ยังพบว่าพอลิเมอร์ผสมทุกอัตราส่วนแสดงอัตราการหลอมไหล, ความถ่วงจำเพาะ, สมบัติความทนแรงดึง, สมบัติความทนแรงดัดโค้ง, ความแข็งแบบร็อคเวลล์, อุณหภูมิอ่อนตัวด้วยความร้อน, ร้อยละความเป็นผลึก, มอดุลัสสะสม และความต้านทานการหดตัวในแม่พิมพ์มีค่าลดลง เนื่องจากพฤติกรรมของความเป็นอิลาสโตเมอร์ของเอทิลีน-ออกทีนโค พอลิเมอร์ในพอลิเมอร์ผสม และจากสมบัติเชิงกลที่เหมาะสมจึงเลือกอัตราส่วน 85/15 (ร้อยละโดยน้ำหนัก) ของไนลอน 6/เอทิลีน-ออกทีนโคพอลิเมอร์กราฟต์มาเลอิกแอนไฮไดรด์สำหรับเตรียมคอมพอสิตกับโวลลาสโทไนต์ ที่ 10, 20 และ 30 ส่วนต่อเรซิน 100 ส่วน ผลการวิจัยพบว่าความถ่วงจำเพาะ, ยังส์มอดุลัส, มอดุลัสดัดโค้ง, อุณหภูมิอ่อนตัวด้วยความร้อน, มอดุลัสสะสม, ความต้านทานการหดตัวในแม่พิมพ์และความต้านทานการหลอมหยดเพิ่มขึ้น ในขณะที่ความทนแรงกระแทกที่ 23 องศาเซลเซียส และ -30 องศาเซลเซียส, ความทนแรงดึงและการยืดตัว ณ จุดขาด มีค่าลดลงเนื่องจากการเกิดอันตรกิริยาระหว่างโวลลาสโทไนต์และเมทริกซ์ต่ำ
Surface-Enhanced Raman Scattering For Enantiomeric Discrimination, Thanyada Sukmanee
Surface-Enhanced Raman Scattering For Enantiomeric Discrimination, Thanyada Sukmanee
Chulalongkorn University Theses and Dissertations (Chula ETD)
Surface-enhanced Raman scattering (SERS) substrates with intended surface modification were developed for enantiomeric analysis by taking the consideration of asymmetric electric field and molecular interaction between a probe molecule and enantiomeric analyte. In the first study, discrimination between enantiomers is achieved by performing tip-enhanced Raman scattering using a silver tip which is chemically modified by an achiral para-mercaptopyridine (pMPY) probe molecule. The different relative intensities of the pMPY spectra were obtained when three pairs of enantiomers containing hydroxy and/or amino groups were used as analytes. Enantiomeric discrimination can be attained by the asymmetric electric field of the tip apex co-existed …
Electrospun Polyacrylonitrile/Graphene Oxide Nanofibers As Sorbent For Solid Phase Extraction Of Epichlorohydrin In Water, Chotitas Sribun
Electrospun Polyacrylonitrile/Graphene Oxide Nanofibers As Sorbent For Solid Phase Extraction Of Epichlorohydrin In Water, Chotitas Sribun
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this study, electrospun nanofibers of polyacrylonitrile functionalized with graphene oxide (PAN/GO) were fabricated and applied as a sorbent in solid phase extraction in a disk format (SPE disk). Graphene oxide were synthesized by chemical oxidation of graphite powder via Hummers and Tour methods and were characterized by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). For electrospun PAN/GO nanofibers, the average diameters of fibers ranged from 117-147 nm and the surface area of PAN and PAN/GO nanofibers were ranged from 7.77-13.40 m2/g. Then, the PAN/GO nanofibers were assembled in a SPE disk format and …
Development Of Polymeric Niosomes Containing Oxyresveratrol For Skin Care Products, Jirawut Jaimun
Development Of Polymeric Niosomes Containing Oxyresveratrol For Skin Care Products, Jirawut Jaimun
Chulalongkorn University Theses and Dissertations (Chula ETD)
Designing delivery systems to improve active ingredient (AI) efficiencies have increased incredible interests in recent years. In this study, a vesicular system has been developed using thin film hydration method with modifications. Niosomes formed from sorbitan monoesters (SpanTM) with cholesterol molar ratios of 0, 0.5, 1 and 1.5 were prepared with varying AI amount 10-50 mg and was hydrated by hyaluronan solution. Oxyresveratrol was separated from the heartwoods of Artocarpus lacucha. This AI has been broadly utilized to restrain enzyme tyrosinase; however, it possesses low stability against heat and light. Encapsulation utilizing niosome or polymeric niosome as a delivery system …
การออกแบบและการประเมินกระบวนการของระบบเซลล์เชื้อเพลิงชนิดคาร์บอเนตหลอมเหลวร่วมกับระบบการแยกอากาศด้วยเคมิคอลลูปปิง, กวินทรา กอบกู้วิทยา
การออกแบบและการประเมินกระบวนการของระบบเซลล์เชื้อเพลิงชนิดคาร์บอเนตหลอมเหลวร่วมกับระบบการแยกอากาศด้วยเคมิคอลลูปปิง, กวินทรา กอบกู้วิทยา
Chulalongkorn University Theses and Dissertations (Chula ETD)
เซลล์เชื้อเพลิงชนิดคาร์บอเนตหลอมเหลวเป็นอุปกรณ์ผลิตไฟฟ้าผ่านกระบวนการทางไฟฟ้าเคมีที่มีประสิทธิภาพสูงและปล่อยมลพิษต่ำ อย่างไรก็ตามการใช้ไฮโดรคาร์บอนเป็นเชื้อเพลิงยังคงมีการปลดปล่อยคาร์บอนไดออกไซด์สู่บรรยากาศ งานวิจัยนี้จึงมีแนวคิดที่จะพัฒนาระบบเซลล์เชื้อเพลิงชนิดคาร์บอเนตหลอมเหลวร่วมกับการดักจับคาร์บอนไดออกไซด์โดยใช้กระบวนการแยกอากาศด้วยเคมิคอลลูปปิง โดยการสร้างแบบจำลองของระบบเซลล์เชื้อเพลิงร่วมกับระบบการแยกอากาศด้วยกระบวนเคมิคอลลูปปิงด้วยโปรแกรม Aspen plus ในแบบจำลองใช้ดีเซลเป็นเชื้อเพลิงและแมงกานีสออกไซด์เป็นตัวพาออกซิเจน แบ่งการออกเป็น 2 กรณี คือ กรณีที่ใช้คาร์บอนไดออกไซด์และกรณีที่ใช้ไอน้ำเป็นตัวพาออกซิเจน จากผลการศึกษา พบว่า ระบบที่มีการดักจับคาร์บอนไดออกไซด์ให้ประสิทธิภาพการผลิตไฟฟ้าโดยรวมต่ำกว่าระบบที่ไม่มีการดักจับคาร์บอนไดออกไซด์ แต่สามารถดักจับคาร์บอนไดออกไซด์ได้สูงถึงร้อยละ 81.13 เมื่อเปรียบเทียบกรณีที่ใช้แก๊สตัวพาออกซิเจนต่างกัน พบว่า กรณีที่ใช้คาร์บอนไดออกไซด์ให้ประสิทธิภาพการผลิตไฟฟ้าสูงกว่ากรณีที่ใช้ไอน้ำโดยให้ค่าประสิทธิภาพ การผลิตไฟฟ้าโดยรวมเท่ากับร้อยละ 50.78 และ 50.03 ตามลำดับ นอกจากนี้ พบว่า กรณีที่ใช้คาร์บอนไดออกไซด์มีปริมาณการปล่อยคาร์บอนไดออกไซด์และดัชนีการใช้พลังงานต่อการดักจับคาร์บอนไดออกไซด์ต่ำกว่ากรณีที่ใช้ไอน้ำ ซึ่งมีค่า 2.72 และ 2.76 โมลต่อกิโลวัตต์ชั่วโมง และ 109.27 และ 120.84 กิโลจูลต่อโมลคาร์บอนไดออกไซด์ ตามลำดับ นอกจากนี้จากการศึกษาผลของตัวแปรดำเนินการต่างๆ ที่ส่งผลต่อประสิทธิภาพการผลิตไฟฟ้าและความสามารถในการดักจับคาร์บอนไดออกไซด์ พบว่า ภาวะดำเนินการที่ดีที่สุด ได้แก่ อัตราส่วนต่อไอน้ำเท่ากับ 3 อุณหภูมิรีฟอร์มิงเท่ากับ 800 องศาเซลเซียส อุณหภูมิดำเนินการของเซลล์เชื้อเพลิงเท่ากับ 750 องศาเซลเซียส สัดส่วนการใช้เชื้อเพลิงเท่ากับร้อยละ 79 และสัดส่วนการใช้คาร์บอนไดออกไซด์เท่ากับร้อยละ 65 โดยให้ประสิทธิภาพการผลิตไฟฟ้าโดยรวมและดัชนีการใช้พลังงานต่อการดักจับคาร์บอนไดออกไซด์เท่ากับร้อยละ 53.04 และ 122.12 กิโลจูลต่อโมลคาร์บอนไดออกไซด์
ผลของอายุคอมพาวนด์ต่อยางไม่ผ่านมาตรฐานจากเครื่องอัดรีดแบบสี่หัวและสมบัติของหน้ายาง, ปิยธิดา จันทรางสุวรรณ์
ผลของอายุคอมพาวนด์ต่อยางไม่ผ่านมาตรฐานจากเครื่องอัดรีดแบบสี่หัวและสมบัติของหน้ายาง, ปิยธิดา จันทรางสุวรรณ์
Chulalongkorn University Theses and Dissertations (Chula ETD)
การเติบโตของอุตสาหกรรมยานยนต์ส่งผลต่อการผลิตยางล้อ ยางคอมพาวนด์ จำนวนมาก ถูกทำลายจากการผลิตที่มากเกินไป เนื่องจากยางคอมพาวนด์ที่ถูกจัดเก็บ เป็นเวลานานอาจส่งผลต่อคุณภาพของยางรถยนต์ งานวิจัยชิ้นนี้ศึกษาผลกระทบของ ระยะเวลาการจัดเก็บยางคอมพาวนด์ที่อุณหภูมิ 25 °C เป็นเวลา 30 วัน และ 50 °C เป็นเวลา 6 วัน ยางคอมพาวนด์ถูกแบ่งประเภทโดยสารตัวเติมได้แก่ เขม่าดำ ซิลิกา – เขม่าดำที่อัตราส่วนโดยน้ำหนักเท่ากับ 1.3 และ 5.8 ทุกๆ 3 วันยางคอมพาวนด์ ถูกวิเคราะห์ผ่านเครื่องวัดความหนืดมูนนี่ และเครื่อง MDR รวมไปถึงการทดสอบ ค่าความแข็ง ความกระเด้งกระดอน สมบัติแรงดึง ความหนาแน่นของการเชื่อมขวาง และสัดส่วนเจลในยางวัลคาไนซ์ จากผลการศึกษา การเชื่อมขวางในตัวยางคอมพาวนด์ จะมีปริมาณมากขึ้นตามเวลา ส่งผลให้ค่าความหนืดมูนนี่มีปริมาณเพิ่มขึ้น โดยยางคอมพาวนด์ที่ใช้ซิลิกามีหมู่ไซลานอล (Si-OH) ที่พื้นผิวจะเกิดปฏิกิริยา ระหว่างสารตัวเติมมากกว่าเขม่าดำ การเพิ่มอุณหภูมิในการจัดเก็บยางคอมพาวนด์ส่งผลให้ เร่งการเกิดการเชื่อมขวาง สำหรับพฤติกรรมการคงรูป การเชื่อมขวางที่เพิ่มขึ้น ส่งผลให้ระยะเวลาการสุกลดลง ค่าแรงบิดต่ำสุดมีค่าเพิ่มขึ้น และค่าแรงบิดสูงสุดลดลง สำหรับยางวัลคาไนซ์ การเชื่อมขวางเพิ่มขึ้นส่งผลต่อการเพิ่มขึ้นของค่าความแข็ง ความกระเด้งกระดอน ยางจะมีความแข็งแรงและเหนียวที่มากขึ้น โดยยางคอมพาวนด์ ที่ถูกจัดเก็บที่ 50 °C จะมีระยะเวลาการจัดเก็บไม่เกิน 3 วัน
Regenerated Amorphous Cellulose From Pineapple Leaf Fibers Via Sulfuric Acid Treatment, Gisma Coraima Asmarani
Regenerated Amorphous Cellulose From Pineapple Leaf Fibers Via Sulfuric Acid Treatment, Gisma Coraima Asmarani
Chulalongkorn University Theses and Dissertations (Chula ETD)
Pineapple leaf fiber (PALF) is an agricultural residue available abundantly in Thailand as a renewable resource with high cellulose content. In this research, a simple process using sulfuric acid (H2SO4) treatment has been developed to produce three types of cellulosic products from PALF, which are regenerated amorphous (RAC), microcrystalline (MCC), and nanocrystalline (NCC) cellulose. H2SO4 acid treatment has been done in 25% and 50% (v/v) H2SO4 under three different temperatures (-20, 30, and 50 ºC). In 25% (v/v) H2SO4, various MCC lengths (about 29.57 ± 9.99 to 106.40 ± 61.10 μm) were produced from different temperatures. Different temperatures in this …
Electrocoagulation In Two Phase Separation For Manipulation Of Volatile Compound Profiles In Perfumes, Isaya Thaveesangsakulthai
Electrocoagulation In Two Phase Separation For Manipulation Of Volatile Compound Profiles In Perfumes, Isaya Thaveesangsakulthai
Chulalongkorn University Theses and Dissertations (Chula ETD)
Electrocoagulation (EC) approach employing two aluminium electrodes and a two phase medium of aqueous solution of NaCl and hexane (2-phase-EC) was developed. The approach enabled electrochemical treatment of odor active compounds in perfume extract. The samples before and after 2-phase-EC at cathode, anode and between the two electrodes left for equilibrium after the treatment were analyzed by using solid phase micro extraction (SPME) and gas chromatography hyphenated with mass spectrometry (GC-MS). This allowed identification of volatile compounds in each sample based on comparison with MS and retention index database. After the treatment, the perfume smells were fresher, sweeter and more …
Direct Synthesys Of Lpg From Co2 By Using Czza And Hy Zeolite Hybrid Catalyst, Jaru Natakaranakul
Direct Synthesys Of Lpg From Co2 By Using Czza And Hy Zeolite Hybrid Catalyst, Jaru Natakaranakul
Chulalongkorn University Theses and Dissertations (Chula ETD)
CO2 conversion to lower hydrocarbons (HCs) is a high-potential method that can significantly reduce and manage this greenhouse gas in the long term. Liquefied petroleum gas (LPG) is widely utilized in transportation. Furthermore, biomass appears to be more attractive for decreasing CO2 emissions through conversion to liquid transportation fuels, as it is a renewable and sustainable energy source. The objectives of this work were to examine the direct synthesis of LPG from CO2 hydrogenation using a mixed metal catalyst composed of copper, zinc oxide, zirconium, and alumina (CZZA), and an HY zeolite as a hybrid catalyst. The study tested four …
Development Of Cellulose As Substrates For Adsorbents And Sensors, Jadetapong Klahan
Development Of Cellulose As Substrates For Adsorbents And Sensors, Jadetapong Klahan
Chulalongkorn University Theses and Dissertations (Chula ETD)
This thesis deals with two parts of development of novel sensors based on cellulose substrate platform. The first part is the development of fluorescence sensors and adsorbents for metal ions using bacterial cellulose as the platform. The second part is the development of colorimetric sensors for smartphone detection of oil marker using filter paper as the platform. In the first part, bacterial cellulose (BC) has several advantageous properties over plant cellulose such as high purity, high surface area, high porosity, and high water-holding capacity due to its three-dimensional network of nanofibrils structure, that make BC appealing for applications related to …
Tuning Of Metal Ion Selectivity By Varying Number Of Coordinating Atoms In Quinoline-Derived Fluorescent Sensors, Jutawat Hojitsiriyanont
Tuning Of Metal Ion Selectivity By Varying Number Of Coordinating Atoms In Quinoline-Derived Fluorescent Sensors, Jutawat Hojitsiriyanont
Chulalongkorn University Theses and Dissertations (Chula ETD)
Both Cd2+ and Zn2+ are metal ions in group 12 elements with very different toxicities but similar binding properties to most organic and biological ligands. In this work, a series of quinoline derivatives were synthesized and studied with an aim for Cd2+ selective turn-on fluorescent sensors. The structures of the compounds were designed to systematically evaluate the effects of amino protons, number of N-coordinating atoms, quinoline/picoline moieties and substituents on the sensing properties. The association constants of all synthesized ligands were studied by UV-vis absorption titration in aqueous solution. The results revealed that the ligands having 6- and 4- donor …
Synthesis And Encapsulation Of 1,3,5-Triazine Derivatives As Anticancer Agent, Monnaya Chalermnon
Synthesis And Encapsulation Of 1,3,5-Triazine Derivatives As Anticancer Agent, Monnaya Chalermnon
Chulalongkorn University Theses and Dissertations (Chula ETD)
The 1,3,5-triazine scaffold is known for its versatile biological activities especially as an anticancer agent, but a limitation of 1,3,5-triazine is the ability to reach cancer cells thus affecting its anticancer potency. In this work, the anticancer activity of twelve 1,3,5-triazine derivatives was evaluated against two colon cancer cell lines along with an investigation of a drug delivery system (DDS) using calcium citrate nanoparticles (CaCit NPs). Results from the biological evaluation showed that there was a variation in the anticancer activity of 1,3,5-triazine derivatives which some of them exhibited comparable activity to the reference drug cisplatin. Compound 2a and 3d …
Fluorescence Sensors From Pyreno[4,5-D]Imidazole Derivatives, Nichapa Chanawungmuang
Fluorescence Sensors From Pyreno[4,5-D]Imidazole Derivatives, Nichapa Chanawungmuang
Chulalongkorn University Theses and Dissertations (Chula ETD)
Herein, The five fluorescent probes (P1, P2, P3, P4 and P5) based on pyreno[4,5-d]imidazole were successfully prepared in two steps from pyrene in 26 – 40% overall yields. After that, all of the compounds were studied the photophysical properties and selectivity for sensing metal ions. The results showed compound P5 was not selective to metal ions while the others (P1, P2, P3 and P4) were selective to detection of trivalent metal ions such as Bi3+, Al3+, Cr3+ and Fe3+ in CH3CN. However, only compound P2 with 2-hydroxyl phenyl substituent on imidazole ring formed complexation reaction selectively towards bismuth (III) ions …
Bacterial Cellulose Composites For Target Analyte Preconcentration In Analytical Applications, Panlop Lormaneenopparat
Bacterial Cellulose Composites For Target Analyte Preconcentration In Analytical Applications, Panlop Lormaneenopparat
Chulalongkorn University Theses and Dissertations (Chula ETD)
Bacterial cellulose (BC) is a well-known natural material with desirable properties including biocompatibility, biodegradability, hydrophilicity, high mechanical strength, high porosity, and broad chemically modifiable capacity. Herein, we incorporate carboxymethyl cellulose (CMC) in BC hydrogel to improve the swelling property and prevent collapsing of 3D bacterial cellulose network upon drying. In addition, gold nanoparticles (AuNPs) were successfully embedded within the BC/CMC composite using in situ chemical reduction. Moreover, AuNPs were uniformly distributed in BC/CMC matrix with a diameter of approximately 13 nm. The freeze-dried BC/CMC/AuNPs composite was subsequently used for adsorption of targeted analytes for laser desorption/ionization mass spectrometry. In particular, …
Development Of Novel Comprehensive Multidimensional Gas Chromatography For Improving Separation And Analysis Of Propylene Oxide Sample, Pannipa Janta
Development Of Novel Comprehensive Multidimensional Gas Chromatography For Improving Separation And Analysis Of Propylene Oxide Sample, Pannipa Janta
Chulalongkorn University Theses and Dissertations (Chula ETD)
New experimental and data analysis approaches in multidimensional gas chromatography (MDGC) comprising 1) comprehensive two dimensional GC (GC×GC) and 2) comprehensive multiple heart-cut were developed with an example application illustrated for analysis of propylene oxide sample. GC×GC system employed column set of long first dimensional (1D) nonpolar (60 m) and short second dimensional (2D) polar (5 m) columns with a flow modulator and a Deans switch (DS) as a splitter; whilst, the comprehensive heart-cut system applied solely a DS located between long 1D nonpolar (60 m) and 2D polar (60 m) columns without use of cryogenic trapping devices. Under the …
Design And Synthesis Of Modified Chitosan/Collagen Coated-Gold Nanoparticles As A Carrier For Anticancer And Antiinflammatory Agents, Naruthai Hongsa
Design And Synthesis Of Modified Chitosan/Collagen Coated-Gold Nanoparticles As A Carrier For Anticancer And Antiinflammatory Agents, Naruthai Hongsa
Chulalongkorn University Theses and Dissertations (Chula ETD)
The proposes of this research are to improve the delivery efficiency of AuNPs. One of the problems with drug loading and drug degradation, the drug was loaded onto the surface of the gold particles, adheres to the outer of the surface, which was easy to decompose in the body. In this work, we have developed the coated AuNPs by modified chitosan (Bi-QCS), which the Biotin-Quat188-AuNPs@collagen (Bi-QCS-AuNPS@collagen) was designed as follow: (i) collagen was used as a reducing agent and a stabilizing agent in the AuNPs@collagen, while (ii) modified chitosan (positive charge polymer) was coated on the outer layer, which modified …
Pyrrolidinyl Peptide Nucleic Acid Probe Capable Of Crosslinking With Dna, Penthip Muangkaew
Pyrrolidinyl Peptide Nucleic Acid Probe Capable Of Crosslinking With Dna, Penthip Muangkaew
Chulalongkorn University Theses and Dissertations (Chula ETD)
DNA interstrand cross-linking (ICL) is a phenomenon in which two strands of the DNA (most often as part of the same DNA duplex) bind together via a covalent bond. This process prevents the DNA strand dissociation, which is essential for its biological functions, and thus is extremely damaging to cells. To overcome the problem of non-specificity associated with general DNA cross-linking agents, a cross-linkable probe in which the reactive group is placed on the probe that can specifically recognize part of the DNA target. The strong binding affinity and biological stability of the pyrrolidinyl peptide nucleic acid (acpcPNA) inspired us …
Anti-Oxidant And Anti-Inflammatory Compounds From Magnolia Liliifera (L.) Baill. Flower And Dendrobium Signatum Rchb.F., Prajak Khumploy
Anti-Oxidant And Anti-Inflammatory Compounds From Magnolia Liliifera (L.) Baill. Flower And Dendrobium Signatum Rchb.F., Prajak Khumploy
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this study, a purification of the EtOAc crude extract of Dendrobium signatum Rchb.f. aerial parts was performed fifteen compounds (1-15) and the hexane crude extracts of Magnolia liliiferra (L.) Baill. were further isolated to accomplish three compounds (16-18). They yielded one new picrotoxane sesquiterpene, 7-hydroxydendroterpene B (2) and a new a-pyrone, (-)-6R-signatone (4), along with sixteen known compounds. These included dendroxine (1), crystallinin (3), dendrocandin B (5), dendrocandin I (6), 6''-de-O-methyldendrofindlaphenol A (7), p-hydroxyphenylethyl-p-coumarate (8), 3,4-dihydroxy-5,4'-dimethoxybibenzyl (9), 3-methoxy-5-[2-(4-methoxyphenyl) ethyl]phenol (10), 4,4'-dihydroxy-3,5-dimethoxybibenzyl (11), naringenin (12), (2S)-homoeridodictyol (13), (2S)-homohesperetin (14), (-)-syringaresinol (15), (+) sesamin (16), (+) fargesin (17) and (-) kobusin …
Tetrabromomethane-Mediated Desulfurization For Synthesis Of Isothiocyanates From Amines, Saharat Techapanalai
Tetrabromomethane-Mediated Desulfurization For Synthesis Of Isothiocyanates From Amines, Saharat Techapanalai
Chulalongkorn University Theses and Dissertations (Chula ETD)
Isothiocyanate considered as an important building block for pharmaceutical industry. Traditional methods for preparation of isothiocyanate involved the desulfurization of dithiocarbamate salt from amine using oxidizing agent. Although those methods are efficient, however, all of them require the use of toxic reagent, strong oxidizing agent, multiple step synthesis, harsh condition and large amount of metal catalyst. Therefore, in this research, we develop two mild methods to synthesize isothiocyanates from amines using low toxic reagent. For the first process, we were able to demonstrate the use of photocatalyst, safranin O to convert dithiocarbamate salt of 4-bromoaniline into 4-brophenyl isothiocyanate in 48% …
Synthesis Of 5-Phenoxyprimaquine Derivatives And Their Tetraoxane Conjugates As Anti-Malarial Agents, Somruedee Jansongsaeng
Synthesis Of 5-Phenoxyprimaquine Derivatives And Their Tetraoxane Conjugates As Anti-Malarial Agents, Somruedee Jansongsaeng
Chulalongkorn University Theses and Dissertations (Chula ETD)
Currently, the development of the new anti-malarial drug for the treatment of the increasing drug-resistant strains of malaria was necessary. Therefore, this research was performed by synthesis and evaluation of their antimalarial activity for the development of primaquine which currently was used for anti-malarial drug. The substituents group on 5-phenoxyprimaquine derivatives which had the highest therapeutic index and less toxicity than primaquine were emphasized. The effect of substituted group at para position was studied. Three new derivatives with CN (7e), CF3 (7g), CONH2 (7h) substituents, and five known derivatives with OMe (7b), Br (7c), Cl (7d), F (7f) substituents and …
Anti-Proliferative Metabolites From The Root Of Calophyllum Inophyllum L., Syahadatain Nor Haerani
Anti-Proliferative Metabolites From The Root Of Calophyllum Inophyllum L., Syahadatain Nor Haerani
Chulalongkorn University Theses and Dissertations (Chula ETD)
This study aimed to isolate secondary metabolites from the root of C. inophyllum L. and to evaluate their anti-proliferative activities against hepatocellular carcinoma and colorectal cancer cells. Chromatographic fractionation of the n-hexane and ethyl acetate crude extracts led to the isolation of two new (1 and 2) and twelve known xanthones (3-14). In addition, metabolites 4, 6 and 8 were isolated from the genus Calophyllum for the first time. All metabolites were evaluated for their anti-proliferative activity against Hep-G2 and HCT-116 cell lines. Metabolites 5 and 14 showed the most active metabolites against both cancer cells, as well as they …
Electrochemical Reaction For Direct Synthesis Of Amides From Aldehydes, Tanawat Rerkrachaneekorn
Electrochemical Reaction For Direct Synthesis Of Amides From Aldehydes, Tanawat Rerkrachaneekorn
Chulalongkorn University Theses and Dissertations (Chula ETD)
Conventional synthesis of amide involves the use of harsh condition, strong oxidizing agents, high value metal catalysts or multiple step synthesis of starting materials. To overcome these problems, in this research, we develop a mild electrochemical oxidative amidation directly from commercially available benzyl alcohols and aldehydes with amines. Optimization studies indicate that this electrochemical oxidative amidation can be proceeded via the use of sodium iodide as both electrolyte and mediator in aqueous solution performing in undivided cell at room temperature without additional additive. Under the optimized condition, we are able to perform electrochemical oxidative amidation of various benzyl alcohols and …
Effect Of Dealumination And Desilication Of Beta Zeolite On Performance Of Nickel Catalysts In Hydroisomerization For Bio-Jet Fuel Production, Warodom Hunsiri
Effect Of Dealumination And Desilication Of Beta Zeolite On Performance Of Nickel Catalysts In Hydroisomerization For Bio-Jet Fuel Production, Warodom Hunsiri
Chulalongkorn University Theses and Dissertations (Chula ETD)
-The Global aviation fuel consumption tends to increase. In recent years, the European Union has announced that fossil fuels jet fuel must be mixed with 10% biofuels in 2020. bio-jet fuel production has many processes such as biomass pyrolysis. or hydro-p
Synthesis Of 1,2-Naphthoquinone Derivatives As Α-Glucosidase Inhibitors, Trang Pham Thi
Synthesis Of 1,2-Naphthoquinone Derivatives As Α-Glucosidase Inhibitors, Trang Pham Thi
Chulalongkorn University Theses and Dissertations (Chula ETD)
For a couple of decades the bioactivity of quinone has been considered as privileged structure-based drug design. In this research, 4-phenylamino, 4-alkylamino, 4-alkylphenylamino, 4-phenoxy and other derivatives of 1,2-naphthoquinone were synthesized, evaluated for their anti α-glucosidase activity and elucidated for their structure-activity relationship. The results indicated that multiple factors affecting to the α-glucosidase inhibition included π-π interaction, hydrophobic interaction and hydrogen bonding with the enzyme. In general, the main factor affecting the activity was the more favorable 1,2-dione production. The presence of electron withdrawing substituents on the phenyl ring and heteroatom linker bound to the quinone skeleton increased the activity. …