Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons

Open Access. Powered by Scholars. Published by Universities.®

Power and Energy

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 811 - 840 of 1298

Full-Text Articles in Chemistry

Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun Nov 2009

Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun

Journal of Electrochemistry

The property of an electrocatalyst depends strongly on its surface structure.The study of surface structure-catalytic functionality is the base of design and preparation of electrocatalysts of high activity,high stability and high selectivity at microstructure level.In this paper,based mainly on our results concering hydrogen and oxygen adsorption-desorption,ethylene glycol oxidation and CO2 reduction,the research progresses in tuning the surface structure and property of electrocatalysts are summarized.This paper overviews firstly the cyclic voltammetric characteristics,electrocatalytic properties of platinum single crystal planes lying on different crystallographic zones of the unit stereographic triangle of face-centered cubic(fcc) metals.Next,the innovation of electrochemical methods to control the surface …


Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen Nov 2009

Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen

Journal of Electrochemistry

The Ni-Pd alloy catalysts with Pd-enriched surface were synthesized through a modified polyol process.The synthesized materials were investigated by XRD and electrochemical methods,and tested as electrocatalysts for CH3OH-tolerant oxygen reduction.The results indicated that the synthesized Ni-Pd nanoparticles possess multiple phases containing Pd-Ni alloy and pure Ni.Comparing with Pd/C,the prepared Ni-Pd/C nanoparticles exhibited better resolved voltammetric peaks between the hydrogen absorption and adsorption,and positively shifted current peaks for the reduction of Pd oxide.The prepared Ni-Pd alloys with Pd-enriched surface have significantly enhanced ORR activity and improved CH3OH tolerance as comparing with Pd/C catalysts.


Complex Reduction Preparation Of Carbon Supported Pd Nanoparticle Catalyst And Its Electrocatalysis For Formic Acid Oxidation, Wei He, Yong-Yin Kang, Chong Du, Zhi-Qing Zou, Xiao-Gang Zhang, Hui Yang Nov 2009

Complex Reduction Preparation Of Carbon Supported Pd Nanoparticle Catalyst And Its Electrocatalysis For Formic Acid Oxidation, Wei He, Yong-Yin Kang, Chong Du, Zhi-Qing Zou, Xiao-Gang Zhang, Hui Yang

Journal of Electrochemistry

A simple procedure involved the complexing of PdCl2 with sodium citrate followed by ethylene glycol reduction has been employed for the preparation of carbon-supported Pd nanoparticles(Pd/C).The XRD and TEM characterizations indicate that Pd nanoparticles with a small particle size were well-dispersed on carbon support.The mean particle sizes of the Pd/C catalysts were found to be increased from 2.7 to 5.8 nm with heat-treatments at different temperature.The mass activity of the Pd/C catalyst for formic acid electrooxidation increased with the decrease in Pd particle size.However,the specific activity increased with Pd particle size.Furthermore,the Pd/C catalyst with a particle size of ca.3.6 …


Electrocatalytic Performance Of Carbon Supported Ir Catalysts With Different Ir Loadings For Ammonia Oxidation, Yu-Zhi Jiang, Qing-Mei Kong, Tian-Hong Lu, Yi-Ming Zhou, Ya-Wen Tang Nov 2009

Electrocatalytic Performance Of Carbon Supported Ir Catalysts With Different Ir Loadings For Ammonia Oxidation, Yu-Zhi Jiang, Qing-Mei Kong, Tian-Hong Lu, Yi-Ming Zhou, Ya-Wen Tang

Journal of Electrochemistry

The electrocatalytic performance of the Ir/C catalyst as the anodic catalyst in the amperometric and electrochemical NH3 sensor was investigated.The experimental results illustrated that in the NaClO4 neutral electrolyte,the electrocatalytic performance of the Ir/C catalyst for the NH3 oxidation is related to the Ir loading in the Ir/C catalyst.Among the Ir/C catalysts with different Ir loading,the best electrocatalytic activity,stability and sensitivity were achieved by the Ir/C catalyst with 10% Ir loadings.In addition,the current densities of the NH3 oxidation at the Ir/C catalysts with the different Ir loadings were linearly proportional to the NH3 concentration.The Ir/C …


Synthesis And Characterization For A New Organic Cathode Material Of Lithium-Ion Batteries——Poly Sulfurized Chloranilic Acid(Psca), Kai Liu, Jian-Ming Zheng, Gui-Ming Zhong, Yong Yang Aug 2009

Synthesis And Characterization For A New Organic Cathode Material Of Lithium-Ion Batteries——Poly Sulfurized Chloranilic Acid(Psca), Kai Liu, Jian-Ming Zheng, Gui-Ming Zhong, Yong Yang

Journal of Electrochemistry

A new organic cathode material,poly sulfurized chloranilic acid(PSCA),has been successfully synthesized for lithium-ion batteries. 13C solid state NMR and FTIR results indicated that the chorine in chronailic acid was substituted by sulfur after sulfurization. The electrochemical measurements showed that the initial discharge capacity of PSCA was up to 287.6 mAh/g,and 169.9 mAh/g still remained after 100 cycles when cycled between 1.5~3.6 V at the current density of 15 mA/g.


Silicon Silver Composite Materials For Li-Ion Batteries, Lian-Bang Wang, Xiao-Bo Dai, Xin-Yan Zhu, Xin-Biao Mao, Chun-An Ma Aug 2009

Silicon Silver Composite Materials For Li-Ion Batteries, Lian-Bang Wang, Xiao-Bo Dai, Xin-Yan Zhu, Xin-Biao Mao, Chun-An Ma

Journal of Electrochemistry

properties of the composites were determined by charge-discharge tests and cyclic voltammetry. The composite composed of Si∶Ag with an atomic ratio of 1∶1 (sample 1#) showed good cyclic stability and charge-discharge reversibility. The reversible capacity of the composite (sample 1#) was remained over 300 mAh·g-1 after 50 cycles. Experimental results showed that controlling the potential range of charge-discharge processes could enhance the cyclic performance of alloy materials.


A Study On The Lifepo4/Mwcnts Cathode Materials For Li-Ion Batteries, You-Yi Peng, Hai-Yan Zhang, Chun-Hua He, Wei Xie, Zhi-Feng Zeng Aug 2009

A Study On The Lifepo4/Mwcnts Cathode Materials For Li-Ion Batteries, You-Yi Peng, Hai-Yan Zhang, Chun-Hua He, Wei Xie, Zhi-Feng Zeng

Journal of Electrochemistry

The LiFePO4/MWCNTs composite was synthesized by ball milling,then the composite electrode was assembled into button lithium-ion batteries.The structure and morphology of the samples,the electrochemical performance of the electrodes were investigated by ways of X-ray diffraction,scanning electron microscopy,cyclic voltammetry and charge-discharge capacity tests. The electrochemical performance of the composite electrodes with different MWNTs contents were studied. The results indicated that the composite electrode containing 10% MWCNTs(by mass)exhibited the most excellent electrochemical performance with the initial charge-discharge capacities of 139 mAh·g-1,128.5 mAh·g-1,respectively,and a Kulun efficiency of 92.4% at 0.1C rate under room temperature.Compared to the electrodes …


A Direct Borohydride Fuel Cell With Fecopc2-Catalysed Cathode, Jin-Fu Ma, Yan Liu, Jun-Hua Lai, Yong-Ning Liu Aug 2009

A Direct Borohydride Fuel Cell With Fecopc2-Catalysed Cathode, Jin-Fu Ma, Yan Liu, Jun-Hua Lai, Yong-Ning Liu

Journal of Electrochemistry

In this paper,a membraneless direct borohydride fuel cell was investigated. Cyclic voltammograms of FeCoPc2-modified glassy carbon electrode in the alkaline solution show that FeCoPc2 was active for oxygen reduction reaction. In addition, the steady-state polarization curve tests indicate that FeCoPc2 had better activity than FePc,CoPc or FePc+CoPc, which is due to its conjugated effect and synergistic effect of Fe and Co. Finally, a maximum power density of 110 mW/cm2 was attained, and the 25-day life test shows that the direct borohydride fuel cell had a good stability.


Electrochemical Reduction Of Nitrobenzene In Different Ionic Liquids, Jun-Li Fan, Wei-Lin Ye, Rong Wang, Li-Qun Xu, Xia-Qin Wu Aug 2009

Electrochemical Reduction Of Nitrobenzene In Different Ionic Liquids, Jun-Li Fan, Wei-Lin Ye, Rong Wang, Li-Qun Xu, Xia-Qin Wu

Journal of Electrochemistry

Electrochemical reduction of nitrobenzene at glassy carbon electrode in different ionic liquids,such as N-methylimidazolium-p-toluene sulfonic acid ([Mim][PhSO3]) and ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF6]) have been investigated by cyclic voltammetry. Experimental results showed that only a cathodic current peak was observed in [Mim][PhSO3],which is a diffusional controlled irreversible reaction. And two pairs of current peaks were obtained in [Bmim][PF6] in the same potential range,indicating showed that the reduction products of nitrobenzene were different in different ionic liquids.


Electrochemical Studies On The Ionic Charge Transfer Properties Of The Oxygen Vacancy Defects In The Oxide Films Formed On Titanium, De-Sheng Kong, Hai-Yan Liu, Wen-Juan Fan, Wen-Hua Lv, Zhang-Yu Yu, Yuan-Yuan Feng Aug 2009

Electrochemical Studies On The Ionic Charge Transfer Properties Of The Oxygen Vacancy Defects In The Oxide Films Formed On Titanium, De-Sheng Kong, Hai-Yan Liu, Wen-Juan Fan, Wen-Hua Lv, Zhang-Yu Yu, Yuan-Yuan Feng

Journal of Electrochemistry

The ionic charge transfer properties of the oxygen vacancy point defects in TiO2 films formed on titanium were studied in 1.0 mol·L-1 HClO4 solution with cyclic voltammetry,potentiostatic polarization,galvanostatic reduction and capacitance measurements. The measured capacitance data were analyzed based on the Mott-Schottky equation and Einstein equation. Based on the different response times to the changes of the applied electric field between the ionic and the electronic charge transfers,the diffusion coefficient of the point defects in the anodic oxide film on titanium was estimated. It was shown that the passive potential region for titanium in 1.0 mol·L-1 …


Synthesis And Characterization Of Sulfur-Carbonnanotubes As Cathode Of Lithium/Sulfur Rechargeable Battery, Rui Du, Zhong-Zhi Yuan Aug 2009

Synthesis And Characterization Of Sulfur-Carbonnanotubes As Cathode Of Lithium/Sulfur Rechargeable Battery, Rui Du, Zhong-Zhi Yuan

Journal of Electrochemistry

A carbon-containing composite was synthesized by heating element sulfur and carbon nanotubes. The sulfur-carbonnanotube composites were characterized by X-ray diffraction, SEM, Brunauer-Emmett-Teller. The electrochemical property was characterized by cyclic voltammetry,constant current charge and discharge. It was revealed that the sulfur-carbonnanotube cathode 2016-type coin cells exhibited a good electrochemical property with the initial dicharge specific capacity up to 680 mAh/g and a stable capacity approximately 500 mAh/g after 30 cycle numbers.


Tungstate/Pertungstate System Cathodic Indirect Oxidation To Synthesis Hydrophobic Monascus Yellow Colorant, Wen-Jian Chen, Xue-Hong Huang, Zhen Chen, Sheng-Bo Ke, You-Zhen Lin Aug 2009

Tungstate/Pertungstate System Cathodic Indirect Oxidation To Synthesis Hydrophobic Monascus Yellow Colorant, Wen-Jian Chen, Xue-Hong Huang, Zhen Chen, Sheng-Bo Ke, You-Zhen Lin

Journal of Electrochemistry

Using SBS-g-(AA/StSO3Na)/SBS-g-DMAEMA Bipolar Membrane as a separator between the cathode and anode chambers in the electrolysis cell,the optimum conditions of deoxidization of oxygen in cathode were obtained through orthogonal experiment. Then using tungstate/pertungstate as media to indirect electrooxidate hydrophobic monascus red colorant to prepare hydrophobic monascus yellow colorant in cathode. The experiment results show the average current efficiency of cathode was up to 72.39% under the following conditions:that graphite as electrode,10% sulfuric acid as anode electrolyte,0.5 g·L-1 hydrophobic monascus red colorant solution as cathode electrolyte,tungstate concentration:15 mmol/L,pH=3,flow rate of oxygen:65 cm3/min,electrolyze 2 h under the …


Electrocatalytic Oxidation Of Glucose On Cnt/Nanocrystlline Tio2-Pt Complex Film Electrode In Ionic Liquids, Dao-Bao Chu, Long-Wu Zha, Shu-Xi Wang, Jian Wang, Ying Xiao, Yuan-Yuan Hou, Jian-Guo He, Xue-Jiao Zhang Aug 2009

Electrocatalytic Oxidation Of Glucose On Cnt/Nanocrystlline Tio2-Pt Complex Film Electrode In Ionic Liquids, Dao-Bao Chu, Long-Wu Zha, Shu-Xi Wang, Jian Wang, Ying Xiao, Yuan-Yuan Hou, Jian-Guo He, Xue-Jiao Zhang

Journal of Electrochemistry

Using ionic liquid [EMI]BF4 as the electrolyte,the electrocatalytic oxidation of glucose on carbon nanotubes/nanocrystlline TiO2 film loaded on Pt (CNT/nanoTiO2-Pt) complex film electrode was investigated by cyclic voltammetry. The results found that the CNT/nanoTiO2-Pt complex electrode had high catalytic activity to the electrochemical oxidation of glucose in ionic liquids and the oxidation potential was -0.46 V. The best effect of glucose oxidation was obtained with the volume ratio of ionic liquid to water being 3:1. The process of electrodic reaction process was concentration polarization controlled.


Ellipsometric Study On Colored Electroplating Of Cuprous Oxide On Ni Substrate, Xue-Song Feng, Jing-Lei Lei, Ai-Xiang Chen, Wan-Shan Yin, Ling-Jie Li, Sha Zheng, Hui Zhao, Shao-Yan Pan Aug 2009

Ellipsometric Study On Colored Electroplating Of Cuprous Oxide On Ni Substrate, Xue-Song Feng, Jing-Lei Lei, Ai-Xiang Chen, Wan-Shan Yin, Ling-Jie Li, Sha Zheng, Hui Zhao, Shao-Yan Pan

Journal of Electrochemistry

The colored Cu2O coating was electroplated on Ni substrate to meet the decorative requirements. Results of X-ray photoelectron spectroscopy (XPS) indicate the coating consisting of Cu2O. Images of scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) show that the Cu2O coating is smooth and uniform,and covers the Ni substrate wholly. Ellipsomtric measurements for Cu2O coatings with various electroplating time were carried out. Using a 4-layer model of "Air-Cu2O layer-interphase-Ni" ,the interphase was modeled with the graded effective medium approximation (EMA),the ellipsomtric data were deconvoluted and the Cu2O …


Electrode Of Metallic Oxides Coated Titanium With Interlayer, Yi Tang, Li-Kun Xu, Yong-Lei Xin, Jun-Tao Wang, Ping Long May 2009

Electrode Of Metallic Oxides Coated Titanium With Interlayer, Yi Tang, Li-Kun Xu, Yong-Lei Xin, Jun-Tao Wang, Ping Long

Journal of Electrochemistry

Various Ti/IrRuSn,Ti/IrTa/IrRuSn and Ti/IrTaSn/IrRuSn oxide electrodes were prepared by sol-gel method.The surface morphology and microstructure were analysed with FESEM and XRD.The electrochemical activity and stability were investigated using electrochemical technologies including chlorine and oxygen evolving potential measurements,cyclic voltammetry,accelerated life test,and alternative electrolysis.The results indicate that the electrodes with interlayers present more cracks on the surface and a little bigger average grain size,with particles of different shapes precipitated in the cracks.The electroactive sites are increased and the selectivity for the chlorine evolving reaction is enhanced,but the current efficiency for the chlorine production is somewhat lowered by the addition of different interlayers.The …


The Accelerated Test Of Simulated Atmospheric Corrosion And The Rust Evolution Of Low Carbon Steel, Jun-Hua Dong, Wei Ke May 2009

The Accelerated Test Of Simulated Atmospheric Corrosion And The Rust Evolution Of Low Carbon Steel, Jun-Hua Dong, Wei Ke

Journal of Electrochemistry

It has been set up an accelerated method of simulating to atmospheric corrosion by using wet/dry alternate test.The rust evolution rule of mass change vs time(in logarithmic coordinate) of low carbon steel under this test shows two linear sections with different slopes,in which the rust evolution transition in weight change corresponds to the compactness transition and crystallization transition during the rust layer growth.It has found that the rust evolution rule of low carbon steel in Wanning exposure site correlates to the rust evolution rule obtained by simulating the coastal atmospheric corrosion test,and the rust evolution rule of low carbon steel …


Investigation Of Electrochemical Noise In The Crevice Corrosion Of Q235 Carbon Cteel, Qian Hu, Yu-Bing Qiu, Xing-Peng Guo May 2009

Investigation Of Electrochemical Noise In The Crevice Corrosion Of Q235 Carbon Cteel, Qian Hu, Yu-Bing Qiu, Xing-Peng Guo

Journal of Electrochemistry

The crevice corrosion behavior of Q235 carbon steels in a NaHCO3+NaCl solution was investigated by electrochemical noise(EN) and electrochemical impedance spectroscopy(EIS).Three stages of crevice corrosion including the induction,the rapid transform and the stable development could be clearly distinguished.The characteristics of the electrochemical noise and the noise resistance Rn showed remarkable differences at each stage.The electrode area ratio(r) of outside to inside the crevice had a significant influence in the development of crevice corrosion.The time of the induction stage increased with increasing r.However,under the stable development stage of the crevice corrosion,the surface outside the crevice was at an active …


Preparation And Electrochemical Properties Of Layered Manganese Oxide(Li-Birnessite Type), Xing-Kang Huang, Hai-Tao Chang, Jian-Long Gan, Qing-Shun Zhang, Hong-Jun Yue, Dong-Ping Lv, Yong Yang May 2009

Preparation And Electrochemical Properties Of Layered Manganese Oxide(Li-Birnessite Type), Xing-Kang Huang, Hai-Tao Chang, Jian-Long Gan, Qing-Shun Zhang, Hong-Jun Yue, Dong-Ping Lv, Yong Yang

Journal of Electrochemistry

Layered Li-birnessite was prepared by means of oxidizing Mn2+ with O2 gas in alkaline media.The as-prepared sample was characterized by scanning electron microscopy(SEM), X-ray diffraction(XRD), BET and thermogravimetric/diffenential thermal analysis(TG/DTA) techniques. The electrochemical properties of the material were also investigated. The results show that such a Li-birnessite consists of well-crystallized spherical particles with an interlayer distance of 0.70 nm. The Li-birnessite delivered a high discharge capacity of 203 mAh/g at a rate of 0.2 C(40 mA/g), and had good rate capability as well.


Electrochemical Performance Of The Exfoliated Graphite Containing Sulfur Cathode Material For Lithium Sulfur Battery, Ke-Guo Yuan, Wei-Kun Wang, Zhong-Bao Yu, An-Bang Wang May 2009

Electrochemical Performance Of The Exfoliated Graphite Containing Sulfur Cathode Material For Lithium Sulfur Battery, Ke-Guo Yuan, Wei-Kun Wang, Zhong-Bao Yu, An-Bang Wang

Journal of Electrochemistry

The exfoliated graphite containing sulfur cathode material was prepared by the high temperature sulfur gas diffusion adsorption method.This cathode material could obtain an initial discharge specific capacity 972 mAh·g-1,capacity retention ratio 78% and cycling efficiency above 80%,respectively.The exfoliated graphite containing sulfur cathode could decrease the reaction interphase charge transfer impedance,and restrain the sulfur or polysulfide shuttle phenomenon during the charge-discharge process through improving the diffusion impedance.


Effects Of Kscn On Kinetic Characters Of The Positive Couple And Performance For Vanadium Redox Flow Battery, Jian-Guo Liu, Dong Shi, Yue Men, Chuan-Wei Yan May 2009

Effects Of Kscn On Kinetic Characters Of The Positive Couple And Performance For Vanadium Redox Flow Battery, Jian-Guo Liu, Dong Shi, Yue Men, Chuan-Wei Yan

Journal of Electrochemistry

In order to improve the reaction activity of VO2+/VO2+ and the battery performance of Vanadium redox flow battery,different concentration of potassium sulfocyanates KSCN were added into 0.1mol/L VOSO4/ H2SO4 solution,and the kinetic characters of electrochemical reaction of VO2+/VO2+ was studied by CV and EIS.The results showed that the addition of KSCN could improve the oxidative peak current value of positive couple VO2+/VO2+ reaction,but had little influence in the reductive peak.The addition of KSCN decreased the impedance at 1.0 V.And the value of standard rate constant k0 …


Electro-Oxidation Of Methanol On Fe-Doped Pt-Zro2/C Catalyst, Mao-Cai Lin, Dong-Dong Liu, Qing-Chun Yu, Ming-Ruo Hu, Heng-Yong Tu May 2009

Electro-Oxidation Of Methanol On Fe-Doped Pt-Zro2/C Catalyst, Mao-Cai Lin, Dong-Dong Liu, Qing-Chun Yu, Ming-Ruo Hu, Heng-Yong Tu

Journal of Electrochemistry

The Fe-doped ZrO2 powders were prepared by so-gel method.After that,Pt-Zr1-xFexO2/C catalysts were made by reducing platinum salts with ethylene glycol.The physical property of the catalyst was characterized by XRD and TEM.It was found that the distribution of the catalyst was narrow,the particle sizes of Pt and ZrO2 particles were 2~4 nm and 3~7 nm,respectively.The Cyclic Voltammetry and Chronoamperometry testing indicated that the electro-catalytic activity for methanol electro-oxidation on Pt-ZrO2/C catalyst increased when ZrO2 was doped with Fe.And Pt-Zr0.95Fe0.05O2/C catalyst showed the highest activity …


Preparation And Performance Of Co And La Co-Doped Li-Rich Lithium Manganate, Da-Qiao Zhou Feb 2009

Preparation And Performance Of Co And La Co-Doped Li-Rich Lithium Manganate, Da-Qiao Zhou

Journal of Electrochemistry

The cathode material of Li1.1Co0.02La0.01Mn2O4 was successfully synthesized by the method of co-precipitation followed by a solid state reaction.In the sintering temperature range of 700~850 ℃,X-ray diffraction(XRD) results showed a single phase of each material and the increase of crystallization degree,and scanning electron microscopic(SEM) images indicated that the particle size increased and the specific surface area decreased,respectively,with increasing the sintering temperature.Due to its lower polarization resistance,the Co and La co-doped lithium-rich lithium manganate(sintered at 800 ℃) positive electrodes showed the most promising electrochemical performance.The capacity retention after 50 cycles reached 98.5%.


Electrochemical Properties Of Functionalized Carbon Nanotubes And Their Applications In Analysis Of 6-Mercaptopurine, Bao-Yi Lu, Yan-Yan Lai, Hong Li Feb 2009

Electrochemical Properties Of Functionalized Carbon Nanotubes And Their Applications In Analysis Of 6-Mercaptopurine, Bao-Yi Lu, Yan-Yan Lai, Hong Li

Journal of Electrochemistry

The electrochemical behaviors and adsorption properties of single-walled carbon nanotubes such as SWNT,SWNT-COOH,and SWNT-OH and multi-walled carbon nanotubes including MWNT,MWNT-COOH,and MWNT-OH modified at a graphite electrode have been investigated by using [Fe(CN)6]3-anion and [Co(phen)3]3+ cation.It was shown that shows good redox reversibility of [Fe(CN)6]3-/4-reactions on the existed carbon nanotubes(CNT) modified electrode.Based on the strong adsorptive property of [Co(phen)3]3+ on the CNT surface,the [Co(phen)3]3+/CNT modified graphite electrode can be obtained by progressive potential sweeping and developed to monitor quantitatively 6-mercaptopurine(6-MP).The adsorption capacity of …


High Utilization Aupt Nanoparticles Supported On Mwcnts For Methanol Electro-Oxidation In Alkaline Medium, Xun Guo, Dao-Jun Guo, Xin-Ping Qiu, Li-Quan Chen, Wen-Tao Zhu Feb 2009

High Utilization Aupt Nanoparticles Supported On Mwcnts For Methanol Electro-Oxidation In Alkaline Medium, Xun Guo, Dao-Jun Guo, Xin-Ping Qiu, Li-Quan Chen, Wen-Tao Zhu

Journal of Electrochemistry

We synthesized gold-platinum electrocatalysts supported on multi-walled carbon nanotubes(MWCNTs) with high utilization by a simple one-step method.A high Pt loading series of bimetallic AuPt/MWCNTs catalysts were prepared by the improved ethylene glycol reduction method,and then were compared in terms of the electrocatalytic activity for methanol electro-oxidation using cyclic voltammetry(CV) and chronoamperometry in alkaline solutions.The structure of AuPt/MWCNTs was characterized by the transmission electron microscopy(TEM),X-ray diffraction(XRD) and energy-dispersive X-ray spectroscopy(EDS).The results showed that the AuPt/MWCNTs catalysts had high Pt utilization,uniform AuPt nanoparticles size and good electrocatalytic activity for methanol electro-oxidation.The effect of Au/Pt mass ratio on electrocatalytic activity was also investigated.The …


Preparation And Electrochemical Performance Of Li3V2(Po4)3, Hou-Gang Fan, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei Feb 2009

Preparation And Electrochemical Performance Of Li3V2(Po4)3, Hou-Gang Fan, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei

Journal of Electrochemistry

The carbon coating Li3V2(PO4)3 powder samples were synthesized by carbon incorporation solid state reaction.The structure,morphology and electrochemical properties have been studied by X-ray powder diffraction,scanning electron microscopy and automatic battery tester system,respectively.Carbon coating on Li3V2(PO4)3 would prevent the particles from agglomerating,reduce the particle size,raise the conductivity and improve the samples′ electrochemical performance.


Silicon Nanowires As Anode Materials For Lithium Ion Batteries, Yan-Peng Fu, Hui-Xin Chen, Yong Yang Feb 2009

Silicon Nanowires As Anode Materials For Lithium Ion Batteries, Yan-Peng Fu, Hui-Xin Chen, Yong Yang

Journal of Electrochemistry

The SiNWs electrodes were fabricated by coating and direct growth methods,respectively.The structure,morphology and electrochemical performance of such materials were characterized by XRD,SEM and charge-discharge tests.The results show that the electrodes prepared by direct growth method had higher capacity,better battery life and also displayed and excellent cyclability at higher currents.During the process of lithiation,the initial crystalline Si transformed to amorphous LixSi,and the average diameter of the SiNWs increased.Despite the large volume changed,the SiNWs remained intact and did not break into smaller particles.


Electrocatalytic Reduction Of Oxygen On Tungsten Carbide Electrode, Chun-An Ma, Yun Huang, Ying-Hong Zhu, Zhao-Yang Chen Feb 2009

Electrocatalytic Reduction Of Oxygen On Tungsten Carbide Electrode, Chun-An Ma, Yun Huang, Ying-Hong Zhu, Zhao-Yang Chen

Journal of Electrochemistry

Tungsten carbide(WC) catalysts were prepared by gas-solid reaction using ammonium metatungstate as precursors which were pretreated with spray drying sphere miniaturation,carbon monoxide as carrier gas and hydrogen as deoxidizing gas.The WC electrode was fabricated using WC catalyst powders and PTFE as binding agent,and characterized by XRD and SEM.Electrocatalyst behavior of WC for oxygen reduction reaction in the sulphuric acid solution was studied by steady-state voltammetry and cyclic voltammetry.The results show that the WC powders obtained were in spheric particles and the prepared WC electrode had a good electrocatalyst activity to the oxygen reduction reaction.The electrode reaction was controlled by adsorption.The …


Nano-Sn/Hard Carbon Composite As Anode Material For Lithium Ion Batteries, Bing-Kun Guo, Jie Shu, Kun Tang, Ying Bai, Zhao-Xiang Wang, Li-Quan Chen Feb 2009

Nano-Sn/Hard Carbon Composite As Anode Material For Lithium Ion Batteries, Bing-Kun Guo, Jie Shu, Kun Tang, Ying Bai, Zhao-Xiang Wang, Li-Quan Chen

Journal of Electrochemistry

The tin(Sn) nano particles were embedded into the mesopores of hard carbon spherules(HCS) to form a composite anode material for lithium ion batteries.The structure of the obtained composite was characterized by X-ray diffraction(XRD) while its electrochemical performances were evaluated with galvanostatic cycling.It is found that the embedding Sn nanoparticles into porous HCS not only result in a composite material with high lithium storage capacity and capacity retention,but also increase the initial coulombic efficiency of the composite.Based on the infrared spectroscopic analysis,the enhanced initial coulombic efficiency is attributed to the inductive decomposition of the ROCO2Li species in the solid …


19th International Symposium Of Fine Chemistry And Functional Polymers (Fcfp-Xix) & Iupac 5th Internaitonal Symoposium On Novel Materials And Synthesis (Nms-V), Editorial Office Of J.Electrochem. Feb 2009

19th International Symposium Of Fine Chemistry And Functional Polymers (Fcfp-Xix) & Iupac 5th Internaitonal Symoposium On Novel Materials And Synthesis (Nms-V), Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.


Preparation Of The Protic Ionic Liquid/Pvdf-Hfp Composite Membranes And Its Performance For Dmfc, Rui-Ying Miao, Jian-Ling Li, Yong Fang, Xin-Dong Wang Feb 2009

Preparation Of The Protic Ionic Liquid/Pvdf-Hfp Composite Membranes And Its Performance For Dmfc, Rui-Ying Miao, Jian-Ling Li, Yong Fang, Xin-Dong Wang

Journal of Electrochemistry

The protic ionic liquid(PIL) α-methyl pyridinium trifluoroacetate([α-MPyH]Tfa) was synthesized by acid & alkali neutralization.Then PIL/PVDF-HFP composite membranes were prepared by means of phase inversion method using acetone as solvent.The conductivities of the composite membrane increased with the temperature and reached 8×10-3 S/cm,1×10-2 S/cm and 3×10-2 S/cm at room-temperature,30 ℃ and 80 ℃,respectively,by electrochemical impedance method.The properties of the methanol-rejecting of the membranes were measured by chronoamperometry as well.The results indicate that the properties of methanol-resistance of the membranes before and after IL combination were equivalent approximately.