Chemistry Commons^™

The Oxidation Of Hydrogen Peroxide On Nanostructured Rhodium Microelectrodes, N. Bartlett Philip, F. Esterle Thomas

Journal of Electrochemistry

Mesoporous Rh films were deposited onto platinum microelectrodes from the H₁ lyotropic liquid crystalline phase of C₁₂EO₈ (octaethyleneglycol monododecyl ether). The electrodes show well defined voltammetry for the oxidation and the reduction of hydrogen peroxide at low concentrations (<10 mmol•L-1) with excellent stability for operation at neutral pH. Based on the hysteresis in the current and the potential dependence the oxidation of hydrogen peroxide occurs through a CEE mechanism involving Rh(OH)₃ on the mesoporous Rh electrode surface. At higher hydrogen peroxide concentrations the current reaches a plateau that is due to either saturation of the binding sites for hydrogen peroxide or limitation of the reaction due to acidification of the solution within the pores. For the thin films (below 200 nm) the hydrogen peroxide calibration curves we …

In Situ Pm-Irras Studies Of A Floating Bilayer Lipid Membrane At Au(111) Electrode Surface, Su Zhangfei, Kycia Annia, Jay Leitch J., Lipkowski Jacek

Journal of Electrochemistry

In situ Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was used to study the structure of a DMPC + cholesterol + GM1 floating bilayer lipid membrane (fBLM) at a Au(111) surface. 1-thio-beta-D-glucose (beta-Tg) was self-assembled onto the Au electrode to increase the overall hydrophilicity of the surface. The fBLM was deposited on the beta-Tg self-assembled monolayer (SAM) using a combination of Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) techniques. The carbohydrate headgroups of the GM1 molecules were physically adsorbed to the beta-Tg SAM forming a water rich cushion between the fBLM and the modified gold substrate. The PM-IRRAS spectra indicate that the DMPC molecules within …

Electrochemical Synthesis Of Silver-Tetracyanoquinodimethane Nanorods At Agar Supported Water/1,2-Dichloroethane Interface, Li Huang, Yixian Wang, Michael V. Mirkin, Bin Ren, Dongping Zhan

Journal of Electrochemistry

Silver-tetracyanoquinodimethane (AgTCNQ) is an important charge transfer salt due to its high conductivity and other electronic properties. In this communication, we report the synthesis of AgTCNQ at the liquid/liquid interface. Agar was used as a gelling agent to support water/1,2-dichloroethane (DCE) interface. Silver ions were transferred from the hydrogel into DCE phase, where they combined with TCNQ^- to form AgTCNQ nanorods. The developed method can provide a new route for synthesis of functional materials based on the electrochemistry at the liquid/liquid interface.

Underpotential Deposition Of Copper On Pt(S)[N(100)X(110)] Stepped Surfaces, Gisbert Rubn, Climent Vctor, Herrero Enrique, M. Feliu Juan

Journal of Electrochemistry

The underpotential deposition of Cu on platinum stepped surfaces composed of (100) terraces and (110) monoatomic steps has been studied in different acidic solutions. It has been found that the initial stage of copper deposition on the surface takes place simultaneously on terrace and step sites, irrespective of the nature of the adsorbing anion. During the voltammetric deposition of a full monolayer, several peaks can be observed. The analysis of the dependence of the peak charge with the step density allows assigning the different peaks to different deposition sites. The peak appearing at most positive potentials corresponds to the deposition …

Carbon Nanotubes With Ni2P Nanoparticles As A Counter Electrode In Dye-Sensitized Solar Cells, Yan-Ye Dou, Nan-Fu Yan, Guo-Ran Li, Xue-Ping Gao

Journal of Electrochemistry

Carbon nanotubes (CNTs) supported by Ni₂P nanoparticles are prepared and used as a counter electrode in dye-sensitized solar cells (DSSCs) for the first time. The CNTs-Ni₂P composite was prepared by the heat treatment of a mixed precursor including nickel chloride, sodium hypophosphite and CNTs in argon atmosphere. The X-Ray diffraction (XRD) results indicate that the as-prepared sample consists of hexagonal Ni2P and carbon nanotubes. No peaks of other nickel phosphides are observed in the XRD pattern. Microstructure of the Ni₂P-CNTs composite was investigated using transmission electron microscopy (TEM). It is shown that the Ni …

Electrochemical Sensing Of Guanine And Adenine Based On The Boron-Doped Carbon Nanotubes Modified Electrode, Ya-Lin Xia, Chun-Yan Deng, Juan Xiang

Journal of Electrochemistry

In this work, the boron-doped carbon nanotubes (BCNTs) modified glassy carbon (GC) electrode was simply fabricated, and the electrochemical oxidation behaviors of guanine and adenine at the BCNTs/GC electrode were investigated. Compared with the bare GC and CNTs/GC electrodes, the BCNTs-modified electrode exhibited extraordinary electrocatalytic activity towards the oxidations of guanine and adenine as indicated by the obvious increase in current responses. Moreover, the peak separation between guanine and adenine was large enough for their potential recognition in mixture without any separation or pretreatment. Therefore, the simultaneous determination of guanine and adenine was successfully achieved. The BCNTs/GC electrode showed high …

Naf-M (M = Fe, Cu) Nanocomposites As Conversion Cathode Materials For Sodium Ion Batteries, Ting Li, Zhong-Xue Chen, Yu-Liang Cao, Han-Xi Yang

Journal of Electrochemistry

The NaF-M (M = Fe, Cu) nanocomposites were prepared by high-energy ball milling using TiN grinding nanoparticles and investigated as cathode materials for sodium ion batteries. The experimental results demonstrated that NaF-Fe and NaF-Cu nanocomposites can go through electrochemical conversion reaction with Na⁺ uptake or removal, delivering a reversible capacity of ~ 150 mAh·g^-1, even through a reversed conversion from initial discharged state to a charged state. These results reveal the possibility to realize a conversion reaction as long as NaF and elemental metal particles are intimately contacted to form active nanocomposites at nanodomain, which suggests a …

Preparation And Electrochemical Performance Of Nanostructured Mno2 Materials, Wen Wu, Dan-Dan Zhou, Meng-Yan Hou, Yong-Yao Xia

Journal of Electrochemistry

Nanostructured MnO₂ materials were prepared in a micro-emulsion medium using sodium dodecyl sulfate (SDS）as a surfactant by a redox reaction between potassium permanganate and aniline. The morphologies of the obtained MnO₂ were critically dependent on the concentrations of SDS. The particle sizes varied with the change in the micro-emulsion medium. The optimized properties of MnO₂ material obtained with the surfactant concentration of 0.2 mol.L^-1 had a specific surface area of 228.2 m².g^-1, and delivered a specific capacitance of 237 F.g ^-1 in 1 mol.L^-1 Li₂SO₄. Additionally, a …

Electrochemical Performances Of Layered Polypyrrole/Chemically Reduced Graphene Oxide Nanocomposites As Supercapacitor Electrodes, Si-Zhe Xu, Xue-Jiao Zhou, Kun Wu, Yong-Qiang Yang, Hai-Xia Wu

Journal of Electrochemistry

Nanocomposites of polypyrrole (Ppy) and chemically reduced graphene oxide (CRGO), Ppy/CRGO, have been fabricated through in-situ polymerization of pyrrole on graphene oxide (GO) sheets. The as-synthesized Ppy/CRGO composites were characterized complementarily using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Fourier transformed infrared spectroscopy (FT-IR). By controlling the initial ratio of the GO to pyrrole, the layered composites could be obtained and their thickness could be tuned properly. The Ppy/CRGO electrodes were prepared using a mechanical compressing technique and their electrical conductivity and electrochemical properties were characterized systematically. We demonstrated that as electrodes for supercapacitor, the Ppy/CRGO composites with Ppy …

Electrochemical Corrosion And Protection Of Copper Foil Treated By Surface Siloxane Filming, Wei-Jun Miao, Yu-Bao Zhang, Ning-Yu Gu, Feng Liu

Journal of Electrochemistry

Copper foil specimens were immersed in hydro-alcoholic solution of 3-amino-propyl-trimethoxy-silane (γ-APS) to prepare a protective self-assembled siloxane membrane on the surface. Potentiodynamic polarization and electrochemical impedance spectroscopic tests were performed in 0.1 mol.L^-1 NaCl to evaluate the effects of the self-assembled siloxane membranes prepared at different pH of γ-APS on corrosion of copper foil. The surface morphology of siloxane membrane was studied by SEM. Experimental results revealed that the γ-APS self-assembled siloxane membranes effectively inhibited the corrosion of copper foil and the optimum anti-corrosion effect was found when the pH value of the silane solution was 7.

Semiconductor Nanocrystals: From Quantum Dots To Quantum Disks, Zheng Li

Graduate Theses and Dissertations

The bottom-up colloidal synthesis opened up the possibility of finely tuning and tailoring the semiconductor nanocrystals. Numerous recipes were developed for the preparation of colloidal semiconductor nanocrystals, especially the traditional quantum dots. However, due to the lack of thorough understanding to those systems, the synthesis chemistry is still on the empirical level. CdS quantum dots synthesis in non-coordinating solvent were taken as a model system to investigate its molecular mechanism and formation process, ODE was identified as the reducing agent for the preparation of CdS nanocrystals, non-injection and low-temperature synthesis methods developed. In this model system, we not only proved …

Nanoencapsulated Copper Pthalocyanine As Photodynamic Antimicrobial Chemotherapy, Prathima Arrabelly

All Capstone Projects

The growing resistance developed by microbes towards antimicrobial agents has driven our focus on developing alternative treatment modalities such as Photodynamic antimicrobial chemotherapy (PACT). It would be difficult for the microbes to develop resistance towards singlet oxygen generated during the PACT process. Photosensitizers are the vehicles of the transfer and translation of light energy into a type II chemical reaction (singlet oxygen generation) in photodynamic antimicrobial chemotherapy. PACT is proposed as a potential, low cost approach to treatment of locally occurring infection.

Photodynamic inactivation (PDI) of Escherichia coli and Staphylococcus aureus has been studied in cultures treated with photoactivated copper …

Multidentate Resorcinarene Surfactants For The Phase Transfer Of Metal Nanoparticles And Nanodiamonds: Applications In Catalysis And Diamond Film Growth, Vara Prasad Sheela

Chemistry & Biochemistry Theses & Dissertations

One main objective of the present work is to functionalize cuboctahedral platinum nanoparticles with various multidentate resorcinarene surfactants and study their influence in determining their catalytic activity. We hypothesized that catalytically active and recyclable catalysts can be achieved by incomplete yet strong passivation of the nanoparticle surfaces by using multidentate resorcinarene surfactants. We have developed phase transfer protocols for functionalizing cuboctahedral platinum nanoparticles with resorcinarene thiol or amine. Fluorescence assay confirmed that both these nanoparticles contained almost comparable unpassivated metal area. The activity of such phase transferred nanoparticles was tested in the catalytic hydrogenation of allyl alcohol. The conversion of …

Preparation And Electrochemical Performance Of Tio2/Gns Nanocomposite As Anode Materials For Lithium-Ion Batteries, Lin-Lin Qin, Huan Zhang, Xiao-Jing Liu, Jian-Hui Xu, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The honeycomb-like porous TiO₂/graphenes (TiO₂/GNs) nanocomposite was prepared by a reflux method. SEM and TEM results showed that nanosized anatase TiO₂ (about 5~10 nm) were dispersed uniformly on the surface of the GNs. The TiO₂/GNs composite showed excellent rate and cycling performance: A stable charge capacity of 169.5 mAh·g^-1 was obtained at 30C, and can restore to 241.7 mAh·g^-1 while current went back to 1C. The stable charge capacity of TiO₂/GNs nanocomposite electrode up to 201.9 mAh·g^-1 was achieved at 10C in the first cycle, and could be …

Detection Of Pml/Rarî± Fusion Gene Using Gold Nanopaticles Modified Electrode By Chronocoulometry, Li-Man Wang, Li-Qing Lin, Shao-Huang Weng, Xin-Hua Lin, Yuan-Zhong Chen

Journal of Electrochemistry

A gold nanoparticles modified electrode was prepared by electrodeposition at constant potential. The sulfydryl modified probe was immobilized onto surface of gold nanoparticles via Au-S covalent bond and hybridized with complementary target DNA sequences, then the DNA sensor was fabricated for the detection of PML/RARα fusion gene by chronocoulometry in acute promyelocytic leukemia (APL). Scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) were used to characterize the surface morphology of gold nanoparticles and the constructing process of sensor. With hexaammineruthenium(Ⅲ) chloride (RuHex) as a novel electrochemical indicator, the chronocoulometric DNA biosensor was employed to monitor artificial APL PML/RARα fusion …

Protonization Of Amino Functional Groups Confined In Nanochannels, Hong-Li Gao, Kai-Lin Zhou, Chen Wang, Su-Juan Li, Hui Zhang, Xing-Hua Xia

Journal of Electrochemistry

Protonization process is the key step of acid-base reaction and occurs in many biological processes. Study of the protonization process of molecules and/or functional groups in confined conditions would assist understanding in the acid-base theory and confinement effect of biomolecules. In this paper, we developed a novel approach to study protonization of functional groups in porous anodic alumina array nanochannels by measuring the flux of electrochemical active probes using an Au film electrochemical detector sputtered at the end of the nanochannels. The protonization status of the surface functional groups in nanochannels can change the surface charges and further modulate the …

Preparation And Characterization Of Prussian Blue Modified Nanoelectrode, Wei Wang, Bao-Fa Su, Dong-Ping Zhan

Journal of Electrochemistry

The Pt nanoelectrodes were fabricated by using a laser-based pipet puller and the recessed nanoelectrodes were prepared by etching of disk Pt nanoelectrodes wtih high frequency ac voltage. Prussian blue microcrystal was synthesized electrochemically on the both disk and recessed Pt nanoelectrodes. The strength of mechanical adhesion for the Prussian blue microcrystal on the nanoelectrode was enhanced. A novel method for the controllable synthesis of single particle is proposed, which has potential applications in modified electrodes and single particle electrocatalysis.

On The Molecular Mechanism Of Electron Transfer Of Cytochrome C Modulated By Gold Nanoparticles In Nano-Sandwich Architecture, Shou-Rui Lin, Li-Xu Wang, Xiu-E Jiang, Li-Ping Guo

Journal of Electrochemistry

The effects of adsorbed gold nanoparticles on the surface-enhanced infrared absorption (SEIRA) difference spectra of redox-induced cytochrome (Cyt) c in AuNPs/Cyt c/Au sandwich architecture were monitored by SEIRA spectroscopy. The results indicated that the intensity of SEIRA difference spectrum for the vibration of the heme was significantly increased due to the adsorption of gold nanoparticles on the Cyt c. This was induced by the electron transfer between the heme and the gold nanoparticles, which also promoted electron transfer of adsorbed protein. This study suggested a new technique for optimizing the electrochemical property of adsorbed protein.

Active Response Of Polymer Materials From External Stimuli – Solvents And Light; Grafting Reactions On Perovskite Layers, Jianxia Zhang

LSU New Orleans Theses and Dissertations

The active response of a series of polymeric materials was investigated. Both solvent activated and light activated thin films and wire systems show dynamic behaviors when exposed to different stimuli.

Solvent mediated fluxional behavior of polymer thin films involved extensive, rapid curling both on infusion and evaporation of good solvents. These films can be either lab-fabricated ones or commercial ones, and the curling behavior can be as fast as seconds. Conditions including polymer materials, chosen solvents, and film geometry can affect the behavior.

Methods that allowed for the creation and retention of distorted wire structures were also developed; the asymmetric …

Electrochemical Preparation Of Nanostructural Pt-Ni And Pd-Ni Films For Ethanol Electro-Oxidation, Chen-Zhong Yao, Hui-Xuan Ma, Bo-Hui Wei

Journal of Electrochemistry

The Pt-Ni and Pd-Ni films were successfully prepared on Ti substrates by electrodeposition method. The porous Pt-Ni nanoflakes appeared to be uniform with the thickness of the slices about 10 ~ 20 nm. The porous Pd-Ni nanoparticles with a flower shape appeared to be uniform with the diameters of 50 ~ 60 nm. The XRD patterns also indicated that the Pd-Ni and Pt-Ni nanostructures have the poor crystallinity. The onset potentials of ethanol oxidation were negatively shifted to –0.74 V on Pt-Ni electrodes and –0.71 V on Pd-Ni electrodes, respectively. Addition of Ni could enhance catalytic activities and antitoxic properties …

Electrochemical Performances Of Carbon-Coated Na2Ti6O13 Nanotubes, Guo-Ran Li, Shuai Sun, Xue-Ping Gao

Journal of Electrochemistry

With rutile TiO₂ and NaOH as starting materials, the Na₂Ti₆O₁₃ nanotubes were prepared by a hydrothermal reaction. The carbon-coated Na₂Ti₆O₁₃ nanotubes were obtained by treating the Na₂Ti₆O₁₃ nanotubes for 4 h in glucose aqueous solutions containing 0.1 mol·L^-1 NaOH. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microcopy (TEM). The results showed that the dimensions of carbon-coated Na₂Ti₆O₁₃ nanotubes were 14 ~ 19 nm of outer diameter, 2 ~ 5 …

Folate Nanoparticle Conjugates, Safwat A. Masood

All Capstone Projects

The folate receptor is overexpressed on the surface of numerous cancer cell types including those of the breast, lung, kidney, ovary, and brain. Recent interest has exploded in the use of folate to deliver payloads and imaging agents to folate receptor positive cancer cells based on several positive clinical trials including phase III trials of EC-145, which is poised to become the first folate targeted, FDA approved drug. Given the success of EC-145 and numerous other agents in the pharmaceutical pipeline, there remains a great interest in the exploitation of this technology in the delivery of nanoscale agents to folate …

Electrochemical Fabrication Of The Ordered Polyaniline Nanowires Array, Yan-Xin Gao, Li-Chao Sun, Su-Yuan Xie, Kang Shi

Journal of Electrochemistry

The effects of electrochemical fabrication methods in different aniline concentrations on the morphologies of polyaniline, which was polymerized on the aligned-multi-walled carbon nanotubes electrode in H₂SO₄ or HClO₄ electrolyte solution, were investigated. It was demonstrated that the polyaniline nanowires would not be prepared by cyclic voltammotry, whereas the nanowires could be obtained by the potentiostatic method without forming the ordered array. Only when the aniline concentration in HClO₄ solution was high enough, the ordered polyaniline nanowires array could be fabricated by the constant current method.

Ag Nanoparticles Self-Assembled Films On Iron Surface And Their Inhibition Properties, Zhe Zhang, Ming-Zi Jia, Le Ruan

Journal of Electrochemistry

The Ag nanoparticles were prepared in aqueous solutions through a chemical reduction method and transferred from water phase to toluene phase with the protection of 1-dodecanethiol (DDT). The polished iron electrode was immersed in the DDT-protected metal nanoparticles toluene solutions to form DDT/Ag nanoparticles self-assembled mixed films. Electrochemical methods such as electrochemical impedance spectroscopy and polarization curve measurement were used to study the inhibition properties of the self-assembled films in the 0.5 mol·L^-1 H₂SO₄ solution. The appearance of elements such as S and Ag from the XPS data identified the presences of DDT and Ag nanoparticles.

Metal Chalcogenide Nanoparticle Gel Networks: Their Formation Mechanism And Application For Novel Material Generation And Heavy Metal Remediation Via Cation Exchange Reactions, Irina Ramona Pala

Wayne State University Dissertations

METAL CHALCOGENIDE NANOPARTICLE GEL NETWORKS: THEIR FROMATION MECHANISM AND APPLICATION FOR NOVEL MATERIAL GENERATION AND HEAVY METAL REMEDIATION VIA CATION EXCHANGE REACTIONS

by

IRINA R. PALA

February 2012

Advisor: Dr. Stephanie L. Brock

Major: Chemistry

Degree: Doctor of Philosophy

The dissertation research is focused on (1) uncovering the mechanism of metal chalcogenide nanoparticle gel formation; (2) extending the cation exchange reaction protocol to zinc sulfide gel networks, with the goal of accessing new aerogel chemistries and understanding the factors that drive the process; and (3) conducting a quantitative analysis of the ability of ZnS aerogels to remove heavy metal ions …

A Novel Fabrication Technique For Three-Dimensional Nanostructures, Ravi Kiran Bonam

Legacy Theses & Dissertations (2009 - 2024)

Three dimensional micro- and nano-structures are commonly used in the field of Photonics, Optoelectronics, Sensors and Biological applications. Although numerous physical models are developed, a major challenge has been in their fabrication which is commonly limited to conventional layer-by-layer techniques. In this dissertation, a novel method for fabricating three dimensional structures using Electron Beam Lithography (EBL) will be presented.

Microscopic And Spectroscopic Analysis Of Wo3 And Ti-Doped Wo3 Thin Films, Young Taek Yun

Open Access Theses & Dissertations

Tungsten oxide (WO3) has been a subject of high interest for its unique properties, and recently for its importance in different types of industrial applications which ranges from non-emissive displays, optical, microelectronic, catalytic/photocatalytic, humidity, temperature, gas, and biosensor devices. In this study, WO3 and Ti doped thin films were prepared using radio frequency magnetron reactive sputtering at different substrate temperatures ranging from room temperature to 500 ºC in increments of 100 ºC. After forming a hypothesis based on knowledge of established WO3 properties, we attempt in this work to investigate how the doping influences the roughness and the mean grain …

Investigations Of Oxidative Stress Effects And Their Mechanisms In Rat Brain After Systemic Administration Of Ceria Engineered Nanomaterials, Sarita S. Hardas

Theses and Dissertations--Chemistry

Advancing applications of engineered nanomaterials (ENM) in various fields create the opportunity for intended (e.g. drug and gene delivery) or unintended (e.g. occupational and environmental) exposure to ENM. However, the knowledge of ENM-toxicity is lagging behind their application development. Understanding the ENM hazard can help us to avoid potential human health problems associated with ENM applications as well as to increase their public acceptance. Ceria (cerium [Ce] oxide) ENM have many current and potential commercial applications. Beyond the traditional use of ceria as an abrasive, the scope of ceria ENM applications now extends into fuel cell manufacturing, diesel fuel additives …

A Simple Approach For Synthesis, Characterization And Bioactivity Of Bovine Bones To Fabricate The Polyurethane Nanofiber Containing Hydroxyapatite Nanoparticles, Faheem A. Sheikh, M. A. Kanjwal, Javier Macossay-Torres, N. A. M. Barakat, H. Y. Kim

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)

In the present study, we had introduced polyurethane (PU) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals had been employed to synthesize HAp NPs through the calcination of bovine bones. Typically, a colloidal gel consisting of HAp/PU had been electrospun to form nanofibers. In this communication, physiochemical aspects of prepared nanofibers were characterized by FE-SEM, TEM and TEM-EDS, which confirmed that nanofibers were well-oriented and good dispersion of HAp NPs, over the prepared nanofibers. Parameters, affecting the utilization of the prepared nanofibers in …

Preparation And Application Of Nano-Nio As Anode In Lithium-Ion Batteries, Cheng-Dong Bai, Jia-Jia Chen, Qi Zhang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

In this work, the nano-NiO material was prepared by hydrothermal method. The surface morphologies and electrochemical properties of nano-NiO material were investigated. The special nano-NiO material with porous surface assembling honeycombs(100-200nm) was obtained by using surface active agents. The discharge capacity of nano-NiO electrode up to 2385.7 mAh/g was achieved at current density of 0.1A/g in the first circle,while 1100mAh/g could be maintained after 100 circles. At current density of 2.0A/g, the discharge capacity of 600 mAh/g was obtained. And when the current density was reduced to 0.1A/g, the discharge capacity was restored to 1050 mAh/g. The nano-NiO electrode exhibited …