Chemistry Commons^™

Multi-Level Analysis Of Atomic Layer Deposition Barrier Coatings On Additively Manufactured Plastics For High Vacuum Applications, Nupur Bihari

Dissertations, Master's Theses and Master's Reports

While hardware innovations in micro/nano electronics and photonics are heavily patented, the rise of the open-source movement has significantly shifted focus to the importance of obtaining low-cost, functional and easily modifiable research equipment. This thesis provides a foundation of open source development of equipment to aid in the micro/nano electronics and photonics fields.

First, the massive acceptance of the open source Arduino microcontroller has aided in the development of control systems with a wide variety of uses. Here it is used for the development of an open-source dual axis gimbal system. This system is used to characterize optoelectronic properties of …

Establishing Independent Tunability Of The Mechanical And Transport Properties Of Polymer Gels, Lucas Rankin

Master’s Theses

Polymer gels can be used in the fabrication of materials for filtering liquid and gaseous media, solid-state electrolytes, and transdermal medical patches. This diverse range of applications primarily relies on the transport and mechanical properties of polymer gels. Both sets of properties have shown excellent tunability, but typically in a coupled fashion. Establishing the independent tunability of the transport and mechanical properties of polymer gels (using simple, cost-effective methods) is paramount if polymer gels are to be used to their full potential. Specifically, block copolymer gels self-assemble into organized nanoscale networks within the gel solvent, which allows for facile control …

Experimental Exploration Of Shared Magnetic Phases Between Diverse Systems Of Iron-Pnictide Superconductors, Ryan Scott Stadel

Graduate Research Theses & Dissertations

The exciting field of iron-pnictide superconductors offers unique opportunities for studying the relationship between magnetism and unconventional superconductivity. This is vital to developing an understanding of the microscopic origin of high-temperature superconductivity, which is itself an important step in harnessing such a potentially revolutionary technology.

Polycrystalline and crystalline samples are synthesized over a diverse collection of related iron-pnictide systems including (Ca,Sr,Ba)1-xNaxFe2As2, Ba(Fe1-xCox)2As2 (122s), and LaFeAs1-xPxO, and TbFeAs1-xPxO (1111s). These compounds are characterized through various types of neutron and x-ray diffraction on multiple instruments, as well as muon spin resonance, and magnetic susceptibility measurements.

A thorough investigation into the conditions under …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

Coaxially Electrospun Fibrous Polymer Scaffolds For Tissue Regeneration And Drug Delivery, Matthew Michael Kleszynski

Graduate Research Theses & Dissertations

A biomaterial is a substance that is specifically engineered to take on a role within the body, either alone or in conjunction with other materials, with the purpose of influencing the body. Using Polymers as a biomaterial is an exciting field of study that has the potential to further our abilities to help those in need. Creating composite nanofibrous scaffolds composed of hydrophobic and hydrophilic polymers may outperform structures made of a single polymer in both in vitro and in vivo environments. Hydrophilicity governs the behavior of polymers in the body and has influence over the mechanical properties of the …

Relating Detonation Parameters To The Detonation Synthesis Of Nanomaterials, Martin Langenderfer

Doctoral Dissertations

“This research investigates the physical and chemical processes that contribute to the detonation synthesis of silicon carbide nanoparticles. Bulk production of SiC nanoparticles through detonation is possible due to pressures achieved over 20 GPa and temperatures over 2000 K as well as quenching rates in excess of 13 billion K/second. These conditions catalyze reaction and bottom-up molecular growth while retaining particles < 100 nm in diameter. In this work, detonation synthesis of SiC was demonstrated by incorporation of polycarbosilane, an SiC precursor material, into an RDX/TNT explosive matrix prior to detonation. Detonation Synthesis of SiC was also accomplished by reacting elemental silicon with carbon liberated by the detonation of negatively oxygen balanced TNT. Hydrodynamic simulation of a 60:40 mass ratio RDX/TNT detonation created conditions thermodynamically suitable to produce cubic silicon carbide within the first 500 nanoseconds after the passage of the detonation wave while carbon remains chemically reactive for molecular formation. Simulations and experimental tests indicated that loading configuration and impedance mismatch of the precursor additives used in detonation synthesis results in conditions in the additives that exceed the accepted detonation pressure of the explosive by greater than three times. Finally, a full factorial experimental design showed increasing silicon concentration, reducing silicon size, and reducing oxygen balance by adjusting the ratio of RDX to TNT decreased the explosives detonation pressure by 20% and increased the soot yield and concentration of SiC observed in the detonation products by 82% and 442% respectively”--Abstract, page iv.

Development Of Synthetic Coal Char Simulant For Microwave Conversion Studies: A Computationally-Driven Approach, Kevin A. Hager

Graduate Theses, Dissertations, and Problem Reports (ETD)

Recent experimental demonstration of new reaction windows for coal char/methane reactions that are less energy-intensive, provides innovation for modular reactors. However, the correlation of the exact mechanism for the enhancement of these reaction windows is not certain. This study investigates the simplification of these experimental studies by developing a well-characterized coal char simulant. The approach involves using a computational approach to screen macroscopic composition to replicate the dielectric and compositional response of actual char. This study is focused on PRB coal char. A discrete element method (DEM) technique was used to simulate the packing of coal chars to give the …

In Depth Characterisation Of The Biomolecular Coronas Of Polymer Coated Inorganic Nanoparticles With Differential Centrifugal Sedimentation, André Perez-Potti, Hender Lopez, Beatriz Pelaz, Abuelmagd Abdelmonem, Mahmoud G. Soliman, Ingmar Schoen, Philip M. Kelly, Kenneth A. Dawson, Wolfgang J. Parak, Zeljka Krpetic, Marco P. Monopoli

Articles

Advances in nanofabrication methods have enabled the tailoring of new strategies towards the controlled production of nanoparticles with attractive applications in healthcare. In many cases, their characterisation remains a big challenge, particularly for small-sized functional nanoparticles of 5 nm diameter or smaller, where current particle sizing techniques struggle to provide the required sensitivity and accuracy. There is a clear need for the development of new reliable characterisation approaches for the physico-chemical characterisation of nanoparticles with significant accuracy, particularly for the analysis of the particles in the presence of complex biological fluids. Herein, we show that the Differential Centrifugal Sedimentation can …

Treated Hfo2 Based Rram Devices With Ru, Tan, Tin As Top Electrode For In-Memory Computing Hardware, Yuvraj Dineshkumar Patel

Theses

The scalability and power efficiency of the conventional CMOS technology is steadily coming to a halt due to increasing problems and challenges in fabrication technology. Many non-volatile memory devices have emerged recently to meet the scaling challenges. Memory devices such as RRAMs or ReRAM (Resistive Random-Access Memory) have proved to be a promising candidate for analog in memory computing applications related to inference and learning in artificial intelligence. A RRAM cell has a MIM (Metal insulator metal) structure that exhibits reversible resistive switching on application of positive or negative voltage. But detailed studies on the power consumption, repeatability and retention …

Core-Shell Structured Ru@Ptru Nanoflower Electrocatalysts Toward Alkaline Hydrogen Evolution Reaction, Xue-Liang Wang, Yuan-Yuan Cong, Chen-Xi Qiu, Sheng-Jie Wang, Jia-Qi Qin, Yu-Jiang Song

Journal of Electrochemistry

Water electrolysis for hydrogen production is beneficial for solving the problem of energy crisis and environmental issues. It is necessary to study highly active and cost-effective catalysts toward hydrogen evolution reaction (HER) to reduce the consumption of noble metals. Herein, we report the synthesis of core-shell structured Ru@Pt_0.24Ru nanoflowers electrocatalyst by stepwise reduction of Ru and Pt precursors in the mixture of oleylamine and benzyl alcohol at 160 ^oC. The average diameter of the resultant Ru@Pt_0.24Ru was 16.5±4.0 nm with a bulk atomic ratio between Pt and Ru of 0.24:1 and a surface ratio of …

Numerical Simulations Of Current And Temperature Distribution Of Symmetrical Double-Cathode Solid Oxide Fuel Cell Stacks Based On The Theory Of Electric-Chemical-Thermal Coupling, Cheng-Rong Yu, Jian-Guo Zhu, Cong-Ying Jiang, Yu-Chen Gu, Ye-Xin Zhou, Zhuo-Bin Li, Rong-Min Wu, Zheng Zhong, Wan-Bing Guan

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a high-efficient clean conversion device for future energy management. Because of the low antioxidant reduction ability and complex thermal stress, the structure of traditional asymmetrical thin anode-supported planar SOFC is easily to be broken under stack operating conditions. To overcome these defects, a new complete symmetrical SOFC based on double-sided cathodes was developed. To study the influences of gas flow direction and current collection mode on the cell performance inside stack, a numerical model was established by finite element method based on the theory of electro-thermo-chemo multiphysical coupling. By applying this model, the molar …

Effect Of 18-Crown-6 Additive On Chromium Electrodeposition In Ionic Liquid, Yi-Jie Wang, Dong-Fang Niu, Xin-Sheng Zhang

Journal of Electrochemistry

Trivalent chromium ion (Cr³⁺) is used for electrodeposition due to its low toxicity. Electrodeposition in ionic liquids can greatly solve for hydrogen evolution problem. However,as a widely used Cr(III) precursor, chromium chloride hydrate (CrCl₃·6H₂O), still contains water. In the presence of water, Cr³⁺ will form a complex coordination structure with water molecules ([Cr(H₂O)₆]³⁺), which is a stable octahedral structure and is difficult to be directly reduced to chromium metal. Therefore, coordination agents should be added into the bath. In this work, the effect of 18-Crown-6 additive on …

Degradation And Thermal Characteristics Of Lini0.8Co0.15Al0.05O2/Graphite Lithium Ion Battery After Different State Of Charge Ranges Cycling, Cun Wang, Wei-Jiang Zhang, Teng-Fei He, Bo Lei, You-Jie Shi, Yao-Dong Zheng, Wei-Lin Luo, Fang-Ming Jiang

Journal of Electrochemistry

The LiNi_0.8Co_0.15Al_0.05O₂ (NCA) cathode exhibits high energy density and large reversible capacity, which plays an essential role in the field of electric vehicles (EVs). However, low capacity retention and poor thermal stability limit its application. Few literatures are found for the capacity degradation mechanism of NCA/graphite batteries at home and abroad. The different state of charge (SOC) ranges cycle degradation behaviors of 18650-type NCA/graphite (2.4 Ah) battery were studied in this paper. The SOC ranges considered were 0% ~ 20% (low), 20% ~ 70% (medium), 70% ~ 100% (high), and 0% ~ 100% …

Preparations And Sodium Storage Properties Of Ni3S2@Cnt Composite, Ming-Tao Duan, Yan-Shuang Meng, Hong-Shuai Zhang

Journal of Electrochemistry

Transition metal sulfides (TMSs)-based electrode materials with highly reversible sodium storage have attracted extensive attentions as one of the most prospective electrode materials for sodium ion batteries (SIBs). However, low cycling stability and rate property caused by large volume expansion and poor electronic conductivity during the electrochemical reaction still hamper their further practical application. In this work, in-situ encapsulated Ni₃S₂ nanoparticles in carbon nanotubes (Ni₃S₂@CNT) have been successfully fabricated as an anode material for high-performance SIBs by a one-step solid-phase calcination process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), …

Effect Of Stereotaxically-Constructed Graphene On The Negative Electrode Performance Of Lead-Acid Batteries, Pin-Song Chen, Yi-Tao Hu, Xin-Yi Zhang, Pei-Kang Shen

Journal of Electrochemistry

With the advantages of high ratio surface area, excellent conductivity and high stability, the stereotaxically-constructed graphene (SCG) material was added to the negative active material (NAM) of lead-acid battery for improving battery performance. XRD, SEM and cyclic voltammetry tests were carried out to analyze the influence of SCG on negative active material. It is found that the conversion efficiency of lead sulfate to lead in the negative active material added with SCG material was higher than that of control group, and the particle size of the lead sulfate obtained after the discharge reaction was smaller, which are favorable factors for …

Preparations And Photoelectrochemical Performances Of Rgo-Tio2 Nanotubes Arrays, Ze-Yang Zhang, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Decorating TiO₂ nanotube arrays with RGO to improve the photocatalytic activity of TiO₂ nanotube arrays has been reported. For the reported RGO-TiO₂ nanotube arrays, TiO₂ nanotube arrays were prepared by anodizing the high-purity Ti foil in an organic electrolyte for multiple-step treatments, while RGO were deposited on TiO₂ nanotube arrays by using cyclic voltammetry or other electrical reduction methods. To enhance the reduction degree and the coverage of RGO on the resultant RGO-TiO₂ nanotube arrays, in this work, the one-step electrochemical anodization in hydrofluoric acid was used to fabricate TiO₂ nanotube arrays with …

Effect Of Reaction Conditions On Cu⁃Catalyzed Co2 Electroreduction, Chang Zhu, Wei Chen, Yan-Fang Song, Xiao Dong, Gui-Hua Li, Wei Wei, Yu-Han Sun

Journal of Electrochemistry

Electrochemical conversion of carbon dioxide (CO₂) driven by renewable electricity that can meet both carbon emission reduction and renewable energy utilization has been rapidly developed in recent years. Copper (Cu) catalyst has long been a promising candidate for CO₂ electroreduction applications because of its natural abundance and specific capability of producing a substantial amount of C2 products. However, various metallic Cu electrodes reported have been significantly influenced by the adsorption of certain cation/anion ions, resulting in wide-span catalytic activities and selectivity for various products. In addition, a recent report demonstrated that by virtue of gas-diffusion flow cell …

Preparation And Process Optimization Of Cathode Materials For Lithium-Sulfur Batteries, Kai Wu

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries represent promising candidates for next-generation energy storage system due to their high energy density and low material cost. However, the industrial application of Li-S batteries remains challenges because of the shuttle effect from lithium polysulfides and the lack of facial routes for Li-S battery preparation. To solve these problems, a cathode consisting of different commercial carbon materials, namely, acetylene black (SP), Ketjen Black (KB) and carbon nanotube (CNT), with sulfur (S) is prepared separately for Li-S battery. After the process of 8-h ball milling for KB/S composite, together with the polyvinyl pyrrolidone (PVP) binder, the cathode could …

Synergistic Effect Of Dissolving O2 And Wavelength On The Photo-Assisted Anodic Deposition Of Ceo2 Thin Films, Tong-Zheng Jin, Yu-Meng Yang, Sheng-Hui Fan, Guo-Ying Wei, Zhao Zhang

Journal of Electrochemistry

Cerium dioxide (CeO₂) thin films have been applied as new material in many technical fields such as solid oxide fuel cells, catalysts, UV absorbents, pharmacology, and coatings for corrosion protection of many metals and alloys. Electrodeposition is widely considered to be one of the best preparation methods for CeO₂ film. In this work, the CeO₂ films were prepared by photo-assisted anodic deposition in the bath solutions containing 0.05 mol·L^-1 cerium (III) nitrate, 0.1 mol·L^-1 ammonia acetate and 70% (V/V) ethanol onto 316L stainless steel (SS) surface. The synergistic effects of …

Preparations And Properties Of Low Cost Sulfide Solid Electrolytes Li6-XPs5-XClX, Na-Chuan Yang, Yu Wang, Yi Shuai, Kang-Hua Chen

Journal of Electrochemistry

With the shortage of energy and environmental pollution, the storage of electric energy is getting more attention all over the world. In order to improve the energy density and safety performance of batteries, uses of solid electrolyte become more and more popular. However, because the conductivity of solid electrolyte is not comparable to that of liquid electrolyte, the solid electrolyte application has certain limitations. With the efforts of researchers from various countries, there are several different solid electrolytes having better conductivity, for instance, sulfide solid electrolyte and oxide solid electrolyte. Sulfide solid electrolyte is a highly promising solid electrolyte material …

Pitting Behaviors Of Passivated And Trans-Passivated 304 Stainless Steel, Jing Shen, Zi-Ming Wang, Da-Jiang Zheng, Guang-Ling Song

Journal of Electrochemistry

In order to further understand the passivation and trans-passivation behaviors of 304 stainless steels, the samples were pretreated under different polarization potentials and their corrosion behaviors were investigated. It was found that the pitting potential of the untreated sample was the same as that of the sample treated with 1.1 V trans-passivation potential, while the pitting potential of the sample treated with 0.5 V passivation treatment was the highest. This observation was further verified by the SKP results. According to SEM observations, the surface of the untreated sample preserved a polishing morphology, while the surface of the 0.5 V passivation …

Step-By-Step Modification Of Graphite Felt Electrode For Vanadium Redox Flow Battery, Jing-Yuan Lou, Dong-Jiang You, Xue-Jing Li

Journal of Electrochemistry

As a well-known electrode material of the vanadium redox flow battery (VRFB),graphite felt electrode is the frequently-used electrode material in VRFB, and its low electrochemical activity is one of the key factors for the low power density of VRFB. In this work, we proposed a step-by-step modification method, which used KMnO₄ to oxidize graphite felt first and then placed in an activation solution to excite its reactivity, to improve the electrochemical performance of the graphite felt electrode. According to the results from cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) characterizations …

Practical Adhesion Measurements In Organic Coatings; Advancing Understanding And Mechanical Methods Development, Diana Gottschalk

Dissertations

“Adhesion” can be considered either a mechanical or chemical phenomenon. The mechanical interpretation describes the difficulty of separating surfaces and is useful for quantifying performance within applications that depend on bulk and interfacial properties. Chemical adhesion describes interfacial resistance to chemical attack and does not depend on bulk properties. Predicting chemical failure through mechanical measurement is confounded by the influence of bulk properties. However, the prospect is attractive because of the robust tolerance for sample geometries, allowing experiments to resemble an end-use system. The present work's primary goal was to elevate mechanical methods to provide a detailed interfacial characterization of …

Spatially Directed Functionalization By Co-Electropolymerization Of Two 3,4-Ethylenedioxythiophene Derivatives On Microelectrodes Within An Array, Benjamin J. Jones, Carol Korzeniewski, Jefferson H. Franco, Shelley D. Minteer, Ingrid Fritsch

Chemistry & Biochemistry Faculty Publications and Presentations

Electrodeposited conductive copolymer films with predictable relative properties (quantities of functional groups for further modification and capacitance) are of interest in sensors, organic electronic materials and energy applications. Potentiodynamic copolymerization of films in aqueous solutions of two different thiophene derivatives, (2,3-dihydrothieno[3,4-b]dioxin-2-yl) methanol (1) and 4-((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)-methoxy)-4-oxobutanoic acid (2), containing 0.02 M total monomer (0, 25, 34, 50, 66, 75, 100 mol% 2), 0.05 M sodium dodecyl sulfate, and 0.1 M LiClO4, on gold microelectrodes in an array was investigated. Decreasing monomer deposited (m) from 0 to 100 mol% 2 is attributed to a decreasing pH that inhibits electropolymerization. Molar ratios of …

Developments Of Machine Learning Potentials For Atomistic Simulations, Howard Yanxon

UNLV Theses, Dissertations, Professional Papers, and Capstones

Atomistic modeling methods such as molecular dynamics play important roles in investigating time-dependent physical and chemical processes at the microscopic level. In the simulations, energy and forces, sometimes including stress tensor, need to be recalculated iteratively as the atomic configuration evolves. Consequently, atomistic simulations crucially depend on the accuracy of the underlying potential energy surface. Modern quantum mechanical modeling based on density functional theory can consistently generate an accurate description of the potential energy surface. In most cases, molecular dynamics simulations based on density functional theory suffer from highly demanding computational costs. On the other hand, atomistic simulations based on …

Synthesis, Characterization, Spectroscopic, And Mesomorphic Studies Of New Schiff Base Ligands And Titanium, Cobalt, Nickel And Copper Metal Centers, Raj K. Gurung

Chemistry & Biochemistry Theses & Dissertations

Transition metal complexes with Schiff base ligands offer a wide application in the field of development of catalysis and material. The straightforward synthesis allowed the structural modification and helped to optimize in various application of such complexes. Titanium-containing complexes have been reported to be important for their catalytic and material applications through the coordination of a tetradentate Schiff base ligand, viz. N, N’-ethylene bis(salicylideneiminate) dianion (salen). Studies reporting the characterization of achiral titanium(IV) salen complexes are scarce due to their intricate nature. Such complexes would be comparatively less expensive and easier to prepare synthetically and thus could represent an …

Study On Cation Exchange Of A Lead Coordination Polymer Targeting Dynamic Mixed Cation Doped And Mixed-Valent Coordination Polymers, Hamisu Aliyu Mohammed

Student Works (2020-2029)

Solid solution in Metal-Organic Coordination Polymers (MOCPs) is an emerging synthetic pathway for modifying chemical compositions and has been expansively investigated. It has been demonstrated to be an important tool for engineering novel functional materials that otherwise have not been synthesized via the conventional technique. Although stable solid material with variable functionalities and intriguing structural motifs could be engineered by judicious selection of multivariate metal centers and multifunctional ligands. However, solid solution featuring mixed valence in MOCP is rare. Motivated by the ability of Pb2+ to adopt range of coordination numbers (CN) and chemical environments (CE), in addition to its …

Atom Trapping And Its Role On The Nucleation & Growth Of Platinum Nanoparticles, Deepak Kunwar

Chemistry and Chemical Biology ETDs

Diesel oxidation catalysts deactivate due to Pt sintering, a major problem in automotive industries. To make sure they operate effectively throughout the lifetime of the vehicle, automotive industries are putting an excessive amount of Pt. There is a need to develop a catalyst that serves long term performance with minimal use of Pt. Jones et al^.1 demonstrated that ceria traps Pt atoms. His work generated some logical and valid questions such as what is the mechanism for the formation of anomalously large Pt particles? What is the upper limit of Pt metal loading in the form of single atoms …

New Metal Based Saturable Absorber For Ultrashort Pulse Generation, Muhammad Taufiq Ahmad

Student Works (2020-2029)

Cost-efficient, robust and flexible laser systems are vital for a wide-range of applications ranging from high-precision material processing to biomedicine. This thesis aims to explore pure silver and gold based saturable absorbers (SAs) as Q-switcher and mode-locker in various fibre laser cavities. The generations of Q-switched pulses in 1-,1.55-, and 2-micron regions have been successfully demonstrated using a pure gold, which was deposited using electron beam deposition onto a PVA thin-film as SA. For instance, a stable Q-switched thulium-doped fibre laser (TDFL) operating at 1949 nm was successfully demonstrated with the gold SA. The proposed laser generates Q switched pulses …

Conversion From Metal Oxide To Mof Thin Films As A Platform Of Chemical Sensing, Meng Chen

USF Tampa Graduate Theses and Dissertations

Chemical sensor is working as a widely used device which can be applied to the detection of specific chemicals that are existing in the environment especially in gas phase. The detection of combustible and toxic chemicals can be extremely important in the field of both industrial and civil activities. The chemical sensor is commonly operating by utilizing a chemical or physical interaction between the specific chemical compound and the sensing functional unit, to obtain an electronic signal caused by the property change and realize the chemical detection. Traditional chemical gas sensors such as catalytic gas sensor, thermal conductivity gas sensor, …