Chemistry Commons^™

Preparation, Characterization And Photoelectrochemical Activities Of Cu-Tio2/Ito Films, Dong Shu, Chun He, Han-Xia Zhang, Ya Xiong

Journal of Electrochemistry

Cu-TiO₂/ITO films were prepared by direct photo-reduction deposition of Cu²⁺ on TiO₂/ITO films. The nanocomposite films were characterized by UV-vis diffuse reflectance spectra (DRS), XRD spectra, Scanning Electron Microscope (SEM) technology, and photovoltage measurement. The feasibility of improving the photocatalytic activity of TiO₂ film by combining the modification of Cu nanoparticles with the application of anodic bias was investigated. The experimental results showed that the deposited Cu has an apparent enhancement effect with respect to suppressing the recombination between the photogenerated charge carriers and enhancing the photocatalytic oxidation of formic acid. The combination could …

Investigation Of Adsorption And Oxidation Behavior Of Isosafrole On A Smooth Pt, Xiao-Hong Zhang, Xiao-Jing Su, Qi-Ling Zhong, Lei Zhang, De-Sheng Mei, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

The electro-oxidation of isosafrole on a smooth platinum electrode was investigated in the non-aqueous solution. The CV curve shows two oxidation peaks and one reduction peak in the potential region between -0.5 V and 1.95 V. The relation between the oxidation and reduction peaks has been determined also by CV. The adsorption behavior of isosafrole on Pt was also investigated.

Study On Electrochemical Performance Of Electroless Cobalt Coating For Microencapsution Of Hydrogen Storage Alloys, Tong-Chi Xia, Sheng-Li Zhang, Shu-Xin Wang, Kun Huang, Wen-Zeng Tian

Journal of Electrochemistry

The chemical cobalt plating method is used to treat on the hydrogen storage alloys. Effect of the surface treatment on the electrochemical performance of MH eletrodes was investigated by carrying out experimental methods of CV, AC and charge/discharge cycle tests. The results showed that after microencapsulation with cobalt, the impedance of electrochemical reaction on the surface and polarization during chare/discharge process was markedly decreased; and the electrocatalytic activity on the surface, discharge capacity, charge efficiency was improved. It was also indicated that the anode reaction of MH electrode treated was controlled by diffusion process.

The Matching Study Of Electrodes In C/Ni(Oh)2 Hybrid Capacitor, Yue-Feng Su, Feng Wu

Journal of Electrochemistry

The energy storage mechanisms of electrochemical double-layer capacitor (EDLC) and C/Ni(OH)₂ hybrid capacitor had been studied. The results proved that,the difference between the capacity of EDLC and C/Ni(OH)₂ hybrid capacitor was detemined by the effectiveness usage of the activated carbon negative electrode, which is a criterion to estimate or design the theoretic capacity of the C/Ni(OH)₂ hybrid capacitor. The electrochemical availability of activated matter in Ni(OH)₂ electrode was introduced, and the quantity of the activated matter in Ni(OH)₂ electrode should be compatible with the capacity of carbon electrode. When the capacities of Ni(OH)₂ electrode …

Electrodeposition Of Copper Into Trenches Under Rotating Hydrodynamic Condition, Jian-Jun Sun, Bu-Gao Xie, Wen-Hui Yin, Guo-Nan Chen

Journal of Electrochemistry

Silicon chips patterned with treneches were fixed onto a rotating electrode. Copper was electrodeposited into the trenches under rotating hydrodynamic conditions The sizes of the trenches are 1 m in height and 0.35 m, 0.50 m and 0.70 m in width, respectively. The effects of rotating of the chip, the current density and the concentration of Cu²⁺ on the filling of thetrenches were studied. It is found that lower current density and moderate concentration of Cu²⁺ resulted in a void free filling of the trenches.

Two Kinds Of Polarons Observedin Polyaniline In Aqueous H2So4, Qin Zhou, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

Simultaneous electrochemistry electron spin resonance (ESR) conductance measurements were carried out on electropolymerized polyaniline and ESR spectra were obtained with high signal/noise ratio. Spectral simulation revealed that in the early stage of polymerization, there were two kinds of polarons. According to the potential dependence of the ESR line width and the corresponding conductivitychange of the polymer, the two polarons are thought to be in ordered and disordered domains, respectively. With increasing doping level, the two polarons underwent similar transfer from Curie spin to Pauli spin and both polarons were charge carriers in the conducting polymer. This deduction was further supported …

Electrochemical Lithium Insertion Of Nanosized Tio2, Ying Lan, Jian-Wen Liu, Xue-Ping Gao, Xing-Di Zhou, Jin-Qiu Qu, Feng Wu, De-Ying Song

Journal of Electrochemistry

The protonic titanate nanotubes with the diameter of 10～15 nm were synthesized via hydrothermal method in NaOH solution and the calcined nanotubes at 500 ℃ were transferred to anatase nanorods with the diameter of 12～20 nm due to dehydration.The electrochemical behavior of the anatase nanorods as lithium insertion materials was examined. The results showed that the nanorod electrode had the high initial discharge capacity of 232 mAh/g and second reversible capacity of 198 mAh/g. The capacity of nanorod electrode maintained 152mAh/g after 20 cycles.

Electrocatalytic And Lifetime Studies Of Commercial Catalystsin A Pemfc, Cheng Xuan, Yan-Yun Ma, Li Qi, Cheng Peng, Ling Chen, Jun Zhao, Ying Zhang, Qin-Bai Fan

Journal of Electrochemistry

A particularly designed H-type cell was used to simulate the operating condition of a hydrogen-air proton exchange membrane fuel cell (PEMFC). The electrocatalytic activity, morphology, structure and lifetime of commercially available catalysts, carbon support platinum (Pt/C) and unsupported platinum-ruthenium (Pt-Ru), were preliminary studied by carrying out electrochemical measurements and by SEM, XRD techniques. The catalysts were simultaneously tested in the H-cell under operation, and also separately tested in a conventional electrochemical cell for comparison. It was found that the characteristic peaks of hydrogen adsorption/desorption on cyclic voltammograms shifted considerably to a more positive direction for Pt/C, while a more negative …

Direct Electron Transfer Of Redox Proteins And Enzymes Promoted By Carbon Nanotube, Chen-Xin Cai, Jing Chen

Journal of Electrochemistry

The redox proteins (enzymes), such as hemoglobin (Hb), horseradish peroxidase (HRP) and glucose oxidase (GOx) were immobilized on the surface of the carbon nanotube modified with glassy carbon (CNT/GC) electrode, respectively. The experimental results showed that the redox proteins (enzymes) underwent effective and stable direct electron transfer reaction at the surface of CNT/GC electrode with a pair of nearly symmetrical redox peaks in phosphate buffer solution. The formal redox potential, E^0' , is almost independent on the scan rates, the average value of E^0'  for Hb, HRP and GOx is -0.343±0.001, -0.319±0.002 and -0.456±0.001 V (vs.SCE,pH 6.9), respectively. …

Exceptional Electrochemical Activities Of Amorphous Fe-B And Co-B Alloy Particles Used As High Capacity Anode Materials, Ya-Dong Wang, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

Ultrafine amorphous alloy particles (UAAP) of Fe-B and Co-B were synthesized and tested for possible use as electroactive anode materials. It is found that unlike their parent elements, the alloy particles of transition metal (TM) and boron, the Fe-B and Co-B showed superior electrochemical activities when used as anodic materials in aqueous alkaline solution. The discharge capacities of Fe-B and Co-B electrodeswere observed to be 1200 mAh/g and 1100 mAh/g at moderately high rate of 100 mAh/g, respectively, much higher than the theoreticalcapacity of currently used zinc metal (820 mAh/g). The exceptional high capacities of the boride alloys were probably …

Stability And Electrochemical Performance Of Nio Cathode Modified By Zno Additive For Mcfc In Molten Carbonates, Bo Huang, Fei Li, Qing-Chun Yu, Gang Chen, Ke-Ao Hu

Journal of Electrochemistry

The ZnO/Ni composite cathode was fabricated by tape-casting method, which microstructures and phases were studied. The electrochemical behaviors of ZnO impregnated NiO cathodes were also evaluated in molten 62 mol%Li₂CO₃ + 38 mol%K₂CO₃eutectic at 650 ℃ by electrochemical impedance spectroscopy (EIS) as a function of ZnO content and immersion time. The ZnO impregnated nickel cathodes showed the similar porosity, pore size and morphology to the reference nickel cathode. The stability tests of ZnO impregnated NiO cathodes showed that the ZnO additive could dramatically reduce the solubility of NiO in a eutectic carbonate mixture …

Structures And Redox Activities Of Poly(M-Methoxyaniline), Yun-You He, Yi-Ting Xu, Li-Zong Dai, Jean-Yves Gal, Hui-Huang Wu

Journal of Electrochemistry

Poly(m-methoxyaniline), PmMAn, was prepared in the presence of HCl, p-toluene-sulfonic acid and perchloric acid. By using cyclic voltammetry, the effect of different acid dopant on electrochemical activities of PmMAn was studied. The results showed that perchloric acid is the best acid to prepare PmMAn with good electrochemical activities The FTIR spectra indicate that the acid radical anions have embedded into PmMAn molecularchain as counter-ion during synthetic process, and this great influences the redox activities of PmMAn. SEM and XRD measurements illustrate that PmMAn is characterized by its typical molecular crystalline being monoclinic.

Study On Electrochemical Properties Of Peo-Based Composite Polymer Electrolytes, Hong-Yan Du, Hu Cheng, Yong Yang

Journal of Electrochemistry

Composite polymer electrolytes were prepared by introducing nano-scale SiO₂ into PEO₈-LiClO₄ matrix. The ionic conductivity, lithium transference number and the electrochemical stability windows were measured. The phase component was evaluated with DSC techniques. The results showed that the introduction of nano fillers enhanced the ionic conductivity. It reached 4.3×10^-5 S·cm^-1 at 22 ℃. The conductivity enhancement of the composite polymer electrolytes is analyzed and proposed.

Study Of Anti-Corrosion Property On Poly(An-Co-Oas)/Epoxy, Qing-Wu Wang, Geng-Chao Wang

Journal of Electrochemistry

Polyaniline, polyanisidine and their copolymer poly(An-co-oAs) were synthesized via the solution chemical oxidative polymerization of aniline and anisidine in an acidic aqueous medium, and their properties and structure were characterized. The electrochemical method were applied to evaluate the corrosion behavior of tined iron uncoated or coated by polyaniline, poly(An-o-oAs), polyanisidine and poly(An-co-oAs)/epoxy blend in acid or saline aqueous solution. The result showed that with the increase of anisidine content, the solubility of polymers is improved apparently but their oxidation extent decreases accordingly. It is also founded that polyaniline, poly(An-co-oAs) and polyanisidine all have good anti-corrosion properties, and their anti-corrosion capacity …

Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li

Journal of Electrochemistry

The concentrationsof soluble Mn(Ⅲ) species, during the reduction ofelectrolytic MnO₂ (EMD) in alkaline solution,have been monitored in situ by UV-visible spectroscopy. The concentration of Mn(Ⅲ) ion in solution changes with discharge time. The first electron discharge process of EMD can be described by three different steps: 1) the reduction of Mn⁴⁺ ions on the surface of EMD particles and the structural defect regions within the EMD, 2) the reduction of Mn⁴⁺ ions in ramsdellite, 3)the reduction of Mn⁴⁺ ions in pyrolusite. During the second electron discharge of EMD, the soluble Mn(Ⅲ) is reduced to Mn(Ⅱ) , …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: First Quarterly Report 01/12/04-02/29/04, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Progress In Research For Biofuel Cell, Yue Bao, Xia-Qin Wu

Journal of Electrochemistry

In this article, research progresses of the biofuel cell in recent years were summarized. The operation principle and classification of the biofuel cells were described. The role of the mediator for promoting electron transfer in biofuel cells and the techniques for improving the electric properties of biofuel cells, such as output potential, were discussed with some attracting research instances. Finally, the choke points for research of biofuel cell were explored, and the application prospect of biofuel cells was forecasted.

An Electrochemical Study Of The Effects Of Chelating Agents And Additives On Electroless Copper Plating, Xin Gu, Zhou-Cheng Wang, Chang-Jian Lin

Journal of Electrochemistry

In this study, ethylenediaminetetraacetic acid disodium salt (Na₂EDTA), triethanolamine(TEA), and 2,2′-dipyridine were adopted as chelating agents or additives in the electrolyte for electroless copper plating, and formaldehyde (HCHO) was as the reducting agent. Linear sweep voltammetry was applied to analyze the polarization behavior. The peak current of formaldehyde oxidation which increased by the addition of 2,2′-dipyridine is beneficial to formaldehyde oxidation in a specific range of concentration, While TEA decreased the peak current of formaldehyde oxidation. Two cathodic peaks due to copper(Ⅱ)reduction of TEA chelatation and copper(Ⅱ)reduction of EDTA chelatation were examined. EDTA increased the reduction peak current …

Preparation, Structure And Electrochemical Hydrogenation Of Carbon Nanotubes Supported Platinum Catalysts, Qing-Gang He, Xiao-Zi Yuan, Xian-Xia Yuan, Zi-Feng Ma

Journal of Electrochemistry

In this paper, Pt/CNTs catalyst was prepared and its electrocatalytic property was studied by obtaining cycling voltammetry curves (C-V) and Tafel curves. In addition, the XRD,XPS and TEM tests were carried out to determine the structure and composition of the catalysts. It can be found that the platinum loading has been increased significantly using a carbon nanotubes support. Dispersion of Platinum was better and gave more active sites. The electrochemical characteristic of Pt/CNTs was also more desirable than that of Pt/C catalys t(Johnson Matthey). In conclusion, carbon nanotubes can played a conspicuous role in "electrogenerative" processes of PEMFC hydrogenation reactor.

Substrates Made By Electrodeposition For Measuring Electrical Properties Of One Dimensional Nanomaterials, Jin-Xuan Liu, Juan Xiang, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

A method to prepare alternating conducting/insulating substrates by electrodeposition-oxidation was established to facilitate I-E measurements of one-dimensional nanomaterial by CT-AFM. The prepared Au/CuO and HOPG/CuO substrates showed low roughness as well as high uniformity of the alternating conducting/insulating structure, Qualitative I-E measurements were performed on a single carbon nanotube attached to the two above-mentioned substrates, both showing metallic characteristics at room temperature and in air.

Studies On The Mechanism Of Electroreduction Of Oxalic Acid, Yu-Zhan Li, Xin Liu, Rui-Sheng Hu, Deng-Ping Gu

Journal of Electrochemistry

The electroreduction mechanism of oxalic acid on Pb electrode in Na₂SO₄ solution were investigated using high scan rate cyclic voltammetry and chronoamperometry. The dynamic parameters for the first step electron transter reaction of oxalic acid electroreduction by were determined. The corresponding reduction peak potentials of oxalic acid, glyoxylic acid and glycolic acid in the cyclic voltammogranis obtained in the same condition were compared, and the intermediate reduction products of oxalic acid were suggested. The results showed that oxalic acid is weakly absorbed on the lead electrode.

Electrochemical Character Of Water Containing Gel Electrolyte And Its Preliminary Examination In Lithium Water Cell, Jing-Dong Liu, Wen-Ji Wang, Xin-Zheng Yi

Journal of Electrochemistry

AC impedance technique has been used to characterize the system of poly(methyl acrylic acid)-poly(methyl acrylic lithiumate)-glycerol (referred to as GPE).The results showed that the conductivity of GPE increased with increasing both temperature and its water content.The glass transition temperature of GPE polymer could be lowered by water. Its conducting characteristic was just like liquid electrolyte,The electrolysis of GPE was almost the same as the electrolysis of water. Its composition voltage was about 1.50V. The GPE has been used to manufacture lithium water cell. When the graphite was used as cathode, the cell could discharge continuously for 2 hours under constant …

Template Synthesis Of Highly Ordered Monocrystalline Metal Nanowire Arrays By A Two-Step Ac Electrodeposition, Juan Xiang, Jing-Hua Tian, Zi-Mian Ni, Zhi-Feng Huang, Bo Liu, Zhong-Qun Tian

Journal of Electrochemistry

The monocrystalline metal nanowire arrays were prepared by using a two-step AC electrodeposition in porous anodic aluminum oxide (AAO) template. The growth mechanism of nanowires was discussed. As a result, it has been found that the second voltage pulse has a considerable effect on the pore-filling ratio, the uniformity and the crystal structure, whereas the initial voltage pulse affects only the pore-filling ratio. Using the two-step AC electrodeposition, a highly ordered monocrystalline metal nanowire arrays with a pore-filling ration above 95% can be easily obtained.

The Interaction In Doping Lithium Of Carbonaneous Anode In Lithium Ion Battery, Chang-Guo Chen, Hong-Min Zhang, Jia Chen, Dan-Mei Yu

Journal of Electrochemistry

The quantum chemical DV-X_α method was used to calculate the lithium-doped models from one-Li-dopant to LiC₆ and LiC₂. It was found that Li⁺ has an tendency to attract electrons from the carbon plane through the C₆ hexagons lying above or below it by the graph of charge-density difference. It was shown that LiC₆ can exist steadily,while LiC₂ can not exist steadily.

Study On Determination Of Iodine Ion At Chitosan Modified Glassy Carbon Electrode, Bin Liu, Xiang-Ying Sun, Jin-Rui Xu

Journal of Electrochemistry

In this paper, a chitosan modified glassy carbon electrode was prepared by the method of covalent-bond reaction, and the anodic stripping voltammetric characteristics of iodine on the modified electrode was studied. The results showed that the modified electrode has higher adsorption and selectivity for I^- , and the sensitivity for I^-  has been much improved in 0.1 mol·L^-1 KH₂PO₄ solution (pH=4.0). The anodic stripping peak current of I^- on the modified electrode varied linearly with I^-  concentration in the range of 2.0×10^-6～2.0×10^-3 mol·L^-1, and the detection limit …

Formation And Characterization Of Water-Repellent Nano Tio2 Coating And Studying Its Anticorrosion Property, Guang-Xia Shen, Yi-Cong Chen, Chang-Jian Lin

Journal of Electrochemistry

Using ethyl acetoacetate (EAcAc) as a chelating agent, ultra fine TiO₂ sol is prepared. Nano-TiO₂ coatings are deposited on the 316L stainless steel by the dip-coating. Hydrothermal post-treatment leads to crack-free coatings. Meanwhile, the surface struture and properties was optimized. Self-assembly of Hetadecafluorodecyltrimethoxysilane (FSA-13) fabricates hydrophobic layers on the surface of the nano-TiO₂ coatings. Particle sizes of TiO₂ sol was analysed by zeta pals potential analysis, and surface morphology, structure and properties was characterized by contract angle instrument, XRD, and SEM technologies. The results have shown that the surface of coatings is porous, with approx. 375 …

Study Of Electrochemical Properties Of The Hydride Alloy Electrode Zrcr0.4Mn0.2V0.1Co0.1Ni1.2 At High Temperature, Song Li, Shi-Jun Ji, Jun-Cai Sun

Journal of Electrochemistry

Electrochemical properties of the hydride alloy electrode ZrCr_0.4Mn_0.2V_0.1Co_0.1Ni_1.2 at the different temperature have been investigated. The results showed that the alloy electrodes possessed the maximum discharge capacities 336 mAh/g and 298 mAh/g at 25 ℃ and 70 ℃ respectively. The activation process of the alloy at 70 ℃ became faster, and the alloy reached its maximum capacity in less than 4 cycles, while in 13 cycles at 25 ℃. The high rate capability increased from 55 % at 25 ℃ to 71% at 70 ℃ at 300 mA/g. It was worth …

Electrochemical Synthesis Of Ferrate(Vi) By Anodic Oxidation, Jia-Ju Xu, Jian-Ming Wang, Wei-Hua Yang, Cheng Chen, Jian-Qing Zhang

Journal of Electrochemistry

The ferrate(Ⅵ) was synthesized by electrochemical anodic oxidation. The effects of preparation conditions on the current yield of ferrate(VI) synthesis have been studied in this work. The experimental results showed that grey cast iron as an anodic material is suitable for electrochemical synthesis and NaOH solution as an electrolyte results in a higher current yield than KOH solution. The highest current yield was obtained at a current density (4.54) mA·cm^-2, temperature 20 ℃ and 14 mol·dm^-3 NaOH. In this case, a current yield of 68.5% was obtained by electrolysis for 1 h.

Electrodeposition Nanolaminated Growth Of Zinc, Ying Cao, Tian-Hui Shen, Jing-Yuan Yao, Gui-Fu Ding

Journal of Electrochemistry

Nanolaminated growth of the electrodeposition of zinc was studied. The structure and size of crystalline in zinc coatings were investigated by using FEG-TEM and XRD. The corrosion tests of the zinc deposition and the Coatings-Neutral salt spray test were performed, the capability in corrosion resistance of the nanolaminated growth was better than that of others.

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

There is an active international interest in lead-bismuth eutectic and similar liquid lead systems because of the relevance to the transmutation of nuclear waste, fast reactors, and spallation neutron sources. A successful program in nuclear waste processing that includes transmutation in accelerator-driven systems and fast reactors, would significantly decrease the space requirements for geological repositories.

Materials in these systems must be able to tolerate high neutron fluxes, high temperatures, and chemical corrosion. For lead bismuth eutectic (LBE) systems, there is an additional challenge because the corrosive behaviors of materials in LBE are not well understood. Most of the available information …