Chemistry Commons^™

Electrodeposition Mechanism And Process Of A Novel Cyanide-Free Gold Sulfite Bath, Jia-Qiang Yang, Lei Jin, Wei-Qing Li, Zhao-Yun Wang, Fang-Zu Yang, Dong-Ping Zhan, Zhong-Qun Tian

Journal of Electrochemistry

A novel cyanide-free gold sulfite process is introduced in this paper. In the bath, chloauric acid was directly employed as the main salt, and hydroxyethylidene diphosphonic acid (HEDP) was used as the stabilizer and coating grain refiner. The bath stability, the gold coating morphology and the mechanism of gold electrodeposition were studied in detail. The results showed that HEDP could significantly improve the bath stability. Moreover, the grains of the gold coating obtained from the gold sulfite bath without HEDP was rod-like, which grew gradually with the increasing of the deposition time, resulting in that the appearance of the coating …

Research Progress Of Copper Electrodeposition Filling Mechanism In Silicon Vias, Yun-Na Sun, Yong-Jin Wu, Dong-Dong Xie, Han Cai, Yan Wang, Gui-Fu Ding

Journal of Electrochemistry

Aiming at the electroplating filling problem of deep via TSV (through silicon via) interconnection, the multi-compatible integrated manufacturing technology team at the Shanghai Jiao Tong University has completed the numerical solution of the equations and realized the numerical simulation of TSV filling mode by applying the finite element method with arbitrary Lagrange Euler algorithm. The filling mechanisms of blind vias, the butterfly filling form for the through vias and the simultaneous filling mode of vias with different aspect ratios are analyzed by simulation, contributing to the parameter optimization and sample manufacturing. The effects of electroplating current density and heat treatment …

Effect Of Corrosion Inhibitors On Copper Etching To Form Thick Copper Line Of Pcb In Acidic Etching Solution, Xiao-Li Wang, Wei He, Xian-Ming Chen, Hong Zeng, Yuan-Zhang Su, Chong Wang, Gao-Sheng Li, Ben-Xia Huang, Lei Feng, Gao Huang, Yuan-Ming Chen

Journal of Electrochemistry

The chemical compounds of 2-mercaptobenzothiazole (2-MBT), benzotriazole (BTA) and phenoxyethanol (MSDS) as corrosion inhibitors were used to inhibit the copper etching to form the thick copper line of PCB in the acidic etching solution. The inhibition status was characterized with contact angle measurement, electrochemical test and etch factor calculation, while the corrosion morphology of copper surface was studied by scanning electron microscope. The adsorption mechanism of corrosion inhibitors on copper surface is analyzed by molecular dynamics and quantum chemistry calculations. The results indicated that the synergistic function of the two inhibitors could effectively promote their adsorption on the copper surface …

Mechanism And Application Of Nickel Nano-Cone By Electrodeposition On A Flexible Substrate, Xiu-Ren Ni, Ya-Ting Zhang, Chong Wang, Yan Hong, Yuan-Ming Chen, Yuan-Zhang Su, Wei He, Xian-Ming Chen, Ben-Xia Huang, Zhen-Lin Xu, Yi-Feng Li, Neng-Bin Li, Yong-Jie Du

Journal of Electrochemistry

Nano-array structure possesses promising prospect in power supply, optical device and electronic manufacturing. In this paper, a black nickel nano-cone array was prepared on a flexible substrate by galvanostatic deposition and the corresponding factors involved in the fabrication of nickel nano-cone array was explored. Experimental results showed that a large current density and low main salt concentration were not favored to the formation of cone nickel structure. It was also found that ammonium chloride, as the crystal modifier, was crucial to deposit the uniform nano-cone array. In addition, the growth mechanism of nickel nano-cone was further studied by molecular dynamics …

Electrodeposition Of Functional Epitaxial Films For Electronics, Kui Huang, Rong-Jiao Huang, Su-Qin Liu, Zhen He

Journal of Electrochemistry

Electrodeposition is a solution-based synthesis technique that can be used to fabricate various functional materials on conductive or semiconductive substrates under ambient conditions. Electrodeposition is usually triggered by an artificial electric stimulation (i.e., applied potential/current) to the substrate to oxidize or reduce ions, molecules, or complexes in the deposition solution layer near the substrate surface, which drives this solution layer to depart from its thermodynamic equilibrium and consequently causes the assembly of targeted deposits on the substrate. During electrodeposition, many experimental parameters could affect the properties of the deposits in different ways. To date, many elements (both metals and nonmetals), …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Study On The Effect Of Additives In The Electrodeposition Of Sn-Ag-Cu Ternary Alloy Solder, Hua Miao, Ming-Rui Li, Wen-Zhong Zou, Guo-Yun Zhou, Shou-Xu Wang, Xiao-Jing Ye, Kai Zhu

Journal of Electrochemistry

Sn-Ag-Cu ternary alloy is the most ideal substitute for Sn-Pb alloy at present, and can be prepared by electrodeposition with high production efficiency, simple equipment, easy maintenance and excellent coating performance. The coordination system of the electroplating solution was investigated through the Hull cell experiment. The type of brighteners used in the plating solution and the ratio of the two brighteners were determined through the microscopic morphologic characterization, electrochemical corrosion test and cathodic polarization curve test. In addition, the dispersant and stabilizer were studied by observing the microscopic morphology and measuring the concentration change of Sn²⁺ ions in the …

An Investigation On The Interface Corrosion Behaviors Of Cobalt Interconnects In Chemical Mechanical Polishing Slurry, Kai-Xuan Qin, Peng-Fei Chang, Yu-Lin Huang, Ming Li, Tao Hang

Journal of Electrochemistry

Cobalt is widely regarded as the most promising interconnect material for 10 nm node and beyond. The development of a chemical mechanical planarization (CMP) slurry suitable for cobalt interconnect is a critical component for the application of cobalt interconnect. During CMP process of the interconnect layer, the achievement of high-quality surface after planarization is greatly challenged by the metal corrosion in CMP slurry. In this contribution, the corrosion behavior of cobalt in a slurry with potassium persulfate (KPS) as an oxidizer, glycine as a complexing agent, and benzotriazole (BTA) as an inhibitor was investigated. Static erosion rates (SER) of cobalt …

Electrochemical Sers Study Of Benzotriazole And 3-Mercapto-1-Propanesulfonate In Acidic Solution On Copper Electrode, Yin-Fei Shen, Yan-Li Chen, Sheng-Xu Wang, Ye Zhu, Wen-Chang Wang, Min-Xian Wu, Zhi-Dong Chen

Journal of Electrochemistry

Since the development of acid copper plating technology, the role of additives is indispensable. In addition to the main salt copper sulfate and supporting electrolyte sulfuric acid, suppressors, accelerators, levelers and chlorine ions (Cl^-) are also required to be added into the plating solution. Appropriate additive system can have a significant impact on the coating or the plating solution, which can help improve the quality of the coating and increase the brightness of the coating. Through electrochemical measurement, vibrational spectroscopy, scanning probe microscopy, molecular dynamics simulation and other methods, researches have a deeper understanding in the adsorption configuration …

Study On Low Voltage Electrodeposition Of Diamond-Like Carbon Film, Li Wang, Min-Xian Wu, Jun Li, Yan-Li Chen, Wen-Chang Wang, Zhi-Dong Chen

Journal of Electrochemistry

Diamond-like carbon (DLC) films are receiving a lot of attention from the scientific community, thanks to the promise of DLC films for applications in microelectronics and optoelectronics. Usually, electrodeposition is the preferred common technique because of low cost, large deposition area and simplicity of the setup. However, when carbon films are electrodeposited on a stainless steel, high cell voltages (≥1000 V) are required owing to the low electric conductivity of the organic solvents. This work has developed a new electrolyte system that could achieve carbon deposition on a stainless steel under a low applied cell voltage. The DLC films were …

Effect Of Sodium Alcohol Thiyl Propane Sulfonate On Electrolysis Of High Performance Copper Foil For Lithium Ion Batteries, Sen Yang, Wen-Chang Wang, Ran Zhang, Shui-Ping Qin, Min-Xian Wu, Naotoshi Mitsuzaki, Zhi-Dong Chen

Journal of Electrochemistry

Electrolytic copper foils have been widely used in printed circuit boards and lithium-ion batteries due to their simple production process and high economic value. In the process of electrolysis foil making, additives can greatly improve the performance of electrolytic copper foils. In this work, the copper foils were prepared in a self-designed plate electrodeposition device of which the operating principles were in accordance with those of actual industrial production. A series of the Virgin Make-up Solution (VMS: 312.5 g·L^-1 CuSO₄·5H₂O, 100 g·L^-1 H₂SO₄, 50 mg·L^-1 Cl^-) containing …

Microstructure Of Electrodeposited Copper Foil: Discussion On The Mechanism Model Of Three-Dimensional Electrocrystallization, Ren-Zhi Liu, Ping-Ling Xie, Chong Wang

Journal of Electrochemistry

The manufacturing of electrolytic copper foil has attracted more and more attention with the extensive applications of printed circuit board and lithium battery. The industrial scale is still extending. Compared with the developments of electroplating equipment and electroplating process, there is limited research on the mechanism of electrodeposition. This paper summarizes the manufacturing process of electrodeposited copper foil and analyzes the differences of various electroplating parameters in different electrodeposited copper technologies, and points out the important role of electrodeposition current density in the formation of copper foil. By showing and comparing the microstructures of different electrodeposited copper foils, the influences …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Electrochemical Synthesis Of Acetylpyrazine, Lin Mao, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Acetylpyrazine is naturally presented in hazelnuts, peanuts, and sesame seeds. As an important food additive, it is widely used in baked foods, meat, sesame and tobacco. At the same time, acetylpyrazine is also an important pharmaceutical intermediate, which is used in the syntheses of anti-tuberculosis drugs, anti-tumor, anti-malaria, anti-viral, antibacterial and treatments of epilepsy, pain and Parkinson’s drugs. At present, the synthesis methods of acetylpyrazine include oxidation method, multi-step method and Grignard reagent method, which have the disadvantages of low yield, cumbersome process, severe reaction conditions and high cost. In this study, acetylation of pyrazine was used to synthesize acetylpyrazine …

Electrochemical Voltammetric Behavior Of Sulfur Mustard On The Bare Pt Electrode, Yu-Lin Yang, Jie Sun, Tian Zhou, Ji-Gang Li, Shou-Ping Wei

Journal of Electrochemistry

The sulfur mustard (bis(2-chloroethyl) sulphide, HD), one of highly toxic chemical weapon agents, can damage the alive tissue cells (such as skin, lung, respiratory mucosa and so on), and cause carcinogenic and mutagenic effects for a long time exposure, which imposes a great threat not only to the human health, but also to the sustainable development of the society. With its convenience, high sensitivity and rapid response, electrochemical technology exhibits considerable potential in the field-deployed detection toward HD, but the related reports are rare. Herein, the electrochemical behavior of HD on the bare Pt electrode was investigated by electrochemical measurements, …

Electrocatalytic "Volcano-Type" Effect Of Nano-Tio2 (A)/(R) Phase Content In Pt/Tio2-CnX Catalyst, Ai-Lin Cui, Yang Bai, Hong-Ying Yu, Hui-Min Meng

Journal of Electrochemistry

The relationship between the electrochemical activity of fuel cell catalysts and Pt particle size, as well as the catalyst support and co-catalyst is still unclear. In this work, FESEM, XRD, BET, TEM and CV techniques were adopted to investigate the effects of TiO₂ anatase (A)/rutile (R) phases content on the electrochemical activity of Pt electrocatalyst. The results showed that the anatase-rutile phase transformation occurred during the heat treatment of TiO₂ at 700 ~ 900 ^oC accompanied by the growth of two-phase crystalline size, and anatase was completely transformed into rutile at 900 ^oC. TEM results revealed …

Simultaneous Hydrogen And (Nh4)2So4 Productions From Desulfurization Wastewater Electrolysis Using Mea Electrolyser, Ju-Cai Wei, Lin Shi, Xu Wu

Journal of Electrochemistry

It is preferred to simultaneously recover resource and energy from waster. Sulfur dioxide, SO₂, a common air pollutant, a potential energy resource, is a key link to sulfur nature circulation. SO₂ can be conversed to NH₄HSO₃ and (NH₄)₂SO₃ during the ammonia desulfurization process, which can be used to produce (NH₄)₂SO₄ fertilizer. For high quality (NH₄)₂SO₄ fertilizer and high heat transfer efficiency of the evaporative crystallization, HSO₃^- or SO₃^2- needs to be oxidized to form SO …

Study And Improvement On Expansion Property Of Silicon Oxide, Wei-Chuan Qiao, Fang-Ru Li, Jin-Lin Xiao, Li-Juan Qu, Xiao Zhao, Meng Zhang, Chun-Lei Pang, Zi-Kun Li, Jian-Guo Ren, Xue-Qin He

Journal of Electrochemistry

The silicon-based anode materials have the potential to meet the ever-increasing demand for energy density in lithium-ion batteries market owing to their high theoretical specific capacity. Unfortunately, their commercialization was hindered by the continuous volume expansion. Herein, the expansion characteristics and corresponding mechanism of the silicon oxide and graphite-silicon oxide composites were investigated by in-situ displacement detection systematically. The results showed that the expansion property was improved by material process modifications. During the de/lithiation processes of graphite, the expansion ratio in 30% ~ 50% SOC changed little because of the small interlayer spacing variation of the intercalated graphite. …

Effect Of Chloride Ion On Electrochemical Behavior Of Silver Electrodeposition In Chcl-Urea Low Eutectic Solvent, Chong-Bo Zhan, Run-Jia Zhang, Xu Fu, Hai-Jing Sun, Xin Zhou, Bao-Jie Wang, Jie Sun

Journal of Electrochemistry

Metallic silver coating has been widely used in the fields of microelectronics industry, catalyst, sensor and preparation of magnetoresistive materials because of its excellent corrosion resistance, good lubricity, high conductivity, excellent decoration and high catalysis. Compared with the traditional aqueous solution system, the research on metal electrodeposition in ionic liquid system is developing rapidly. In addition, additives are the key factors in the silver plating process. Adding a small amount of organic or inorganic additives to the plating solution will significantly change the coating properties, such as improving brightness, hardness and ductility. In this paper, using choline chloride urea (ChCl-Urea) …

Preparation And Properties Of Gcp-Supported Palladium Particles Composite Towards Electrochemical Ammonia Synthesis, Ying-Chao Wang, Zi-Zai Ma, Yi-Fan Wu, Xiao-Guang Wang

Journal of Electrochemistry

Ammonia (NH₃) plays an essential role in agriculture and modern industries. Electrochemical fixation of nitrogen (N₂) to ammonia (NRR) under ambient conditions with renewable electricity is a promising strategy to replace the industrial Haber-Bosch method. However, it usually suffers from extremely poor ammonia yield and low Faraday efficiency due to the poor electrocatalysts. Therefore, intensive studies have been devoted to developing efficient NRR catalysts till now. Among them, palladium (Pd) can capture protons in the aqueous phase to form stable α-PdH, which balances the competitive adsorption between nitrogen and protons as well as reduces the …

Rational Design Of Composite Nanomaterials For Water Treatment Applications, Mariana Marcos-Hernandez

Open Access Theses & Dissertations

Water quantity and quality have been affected in communities all around the world due to population growth, pollution, changes in land use, and climate change. In order to cope with existing and anticipated water demands and shortages, the use of treated or reclaimed water is an ongoing alternative that has helped communities all over the world address this problem. The adaptation of nanotechnology to traditional water and wastewater treatment processes offers new opportunities in technological developments. Unique size-dependent properties such as: high surface to mass ratio, high reactivity, high sorption capacities, fast dissolution, superparamagnetism, among others, provide high-tech efficient materials …

Investigation On Electrochemical Processes Of P-Aminothiophenol On Gold Electrode Of Nanostructures, Hui-Yuan Peng, Jia-Zheng Wang, Jia Liu, Huan-Huan Yu, Jian-De Lin, De-Yin Wu, Zhong-Qun Tian

Journal of Electrochemistry

Electrochemical reactions on nanostructured noble electrodes have received much attention, however, the reaction mechanism and reaction kinetics are still difficult to be studied. Probe molecule can give an insight to the investigation of electrochemical reactions on noble electrodes with nanostructures. In this paper, the electrochemical process of p-aminothiophenol (PATP) adsorbed on the gold electrode was studied by electrochemical cyclic voltammetry and surface-enhanced Raman spectroscopy (SERS). Here, we used one-step sodium citrate reduction method (Frens method) to synthesize gold nanoparticles, which are used to construct the nanostructured gold electrode. The Raman electrolytic cell used was based on the traditional three-electrode electrolytic …

Study On Electrochemical Conversion Of Ammonium Sulfate To Ammonium Persulfate In Acetylpyrazine Wastewater, Yi-Jie Wang, Dong-Fang Niu, Xin-Sheng Zhang

Journal of Electrochemistry

Acetylpyrazine is an important spice and also plays important roles in biology, medicine and other fields. However, the wastewater containing ammonium persulfate, ferric ion (Fe³⁺), pyrazine, and a large amount of ammonium sulfate was produced during the production of acetylpyrazine. In this study, ammonium sulfate in acetylpyrazine wastewater was electrolytically converted into ammonium persulfate for economic benefits. Using platinum as an anode and graphite as a cathode, the influence factors of the electrolysis process (including the composition of the anolyte, the current density, the temperature, etc.) were firstly investigated without interference from other compositions. Under the optimal condition, …

Study On Electrodeposition Of Antimony In Choline Chloride-Ethylene Glycol Eutectic Solvent, Hao Wang, Xiao-Zhou Cao, Xiang-Xin Xue

Journal of Electrochemistry

Antimony is a chemically stable metal that has been widely used in industry, military and other fields. The use of electrodeposition to prepare antimony coating has the advantages of simple operation and low cost. The deep eutectic solvent (DES) is a eutectic mixture composed of a hydrogen bond donor and a hydrogen bond acceptor at a fixed molar ratio. It has the advantages of wide electrochemical window, high thermal stability, easy preparation, and low cost. Selecting DES as the electrolyte for electrodeposition can avoid the hydrogen evolution reaction of the aqueous system and the toxicity of ionic liquids. In recent …

Adjusting The Alloying Degree Of Pt3Zn To Improve Acid Oxygen Reduction Activity And Stability, Tian-En Zhang, Ya-Ni Yan, Jun-Ming Zhang, Xi-Ming Qu, Yan-Rong Li, Yan-Xia Jiang

Journal of Electrochemistry

Proton exchange membrane fuel cell (PEMFC) is a new type of energy device, a relatively excellent way to achieve carbon neutrality. However, due to the relatively slow reaction rate of oxygen reduction reaction (ORR) at the cathode, platinum (Pt) is the key material of the cathode catalyst. However, Pt is a kind of noble metal, and its high cost restricts the PEMFC commercialization process. At present, the main approach is to combine transition metals with Pt to prepare Pt-based alloys and to reduce the use of Pt. Pt-based alloys are excellent catalysts for ORR, improving both the activity and stability, …

Preparation Of Pt@Basrtio3 Nanostructure And Its Properties Towards Photoelectrochemical Ammonia Synthesis, Jing Zhang, Rui-Xia Guo, Jian-Jun Fu, Shi-Bin Yin, Pei-Kang Shen, Xin-Yi Zhang

Journal of Electrochemistry

Ammonia is an important industrial raw material and a potential green energy. Using renewable energy to convert nitrogen into ammonia under ambient condition is an attractive method. However, the development of efficient photoelectrochemical ammonia synthesis catalysts remains a challenge. Perovskite such as BaSrTiO₃ (BST) is a good photocatalytic material. However, BST is active under ultraviolet light and has a high recombination rate of photogenerated electron-hole pairs. By dispersing precious metals, it can effectively regulate the absorption of sunlight by BST. In this work, we used a two-step method to prepare BST. The H₂PtCl₆·6H₂O …

Multi-Scale Simulation Revealing The Decomposition Mechanism Of Electrolyte On Lithium Metal Electrode, Yan-Yan Zhang, Yue Liu, Yi-Ming Lu, Pei-Ping Yu, Wen-Xuan Du, Bing-Yun Ma, Miao Xie, Hao Yang, Tao Cheng

Journal of Electrochemistry

Lithium metal is considered as an ideal anode material for next-generation high energy density batteries with its high specific capacity and low electrode potential. However, the high activity of lithium metal can lead to a series of safety issues. For example, lithium metal will continuously react chemically with the electrolyte, forming unstable the solid electrolyte (SEI) films. In addition, lithium dendrites can be formed during cycling, which can puncture the SEI film and cause short circuits in the battery. These drawbacks greatly hinder the commercial application of lithium metal. To solve the above problems, it is important to understand the …

Effects Of Electrode Shape On Lithiation Process Of Lithium-Ion Battery Electrodes, Shi-Wei Sun, Jian-Jun Nie, Yi-Cheng Song

Journal of Electrochemistry

This paper studies the influence of electrode shape on the lithiation process of lithium ion batteries. Both experimental observation and numerical simulation are employed to investigate the competitive interaction between the diffusion of lithium ions in both solid and liquid phases and the lithium intercalation reaction at the electrode surface. Experimental cells were prepared with the anode and cathode being placed parallel, leaving the latter embracing the former. An experimental device based on CCD camera was set up for in situ observation of electrode lithiation. The lithiation levels of the graphite anodes were estimated according to the observed color profile. …

An Additive Incorporated Non-Nucleophilic Electrolyte For Stable Magnesium Ion Batteries, Mao-Ling Xie, Jun Wang, Chen-Ji Hu, Lei Zheng, Hua-Bin Kong, Yan-Bin Shen, Hong-Wei Chen, Li-Wei Chen

Journal of Electrochemistry

Non-nucleophilic electrolytes are promising next-generation highly stable electrolytes for magnesium-ion batteries (MIBs). However, a passivation layer on Mg metal anode usually blocks Mg²⁺ diffusion, leading to poor reaction kinetics and low Coulombic efficiency of the Mg plating/stripping in these electrolytes. Here we explore the utilization of phenyl disulfide (PDF) as a film-forming additive for non-nucleophilic electrolytes to regulate the interfacial chemistry on Mg metal anode. Phenyl-thiolate generated from the PDF additive was found to suppress the unfavorable surface blocking layer, resulted in a high Coulombic efficiency of up to 99.5% for the Mg plating/stripping process as well as a …

In-Situ/Operando57Fe Mössbauer Spectroscopic Technique And Its Applications In Nife-Based Electrocatalysts For Oxygen Evolution Reaction, Jafar Hussain Shah, Qi-Xian Xie, Zhi-Chong Kuang, Ri-Le Ge, Wen-Hui Zhou, Duo-Rong Liu, Alexandre I. Rykov, Xu-Ning Li, Jing-Shan Luo, Jun-Hu Wang

Journal of Electrochemistry

The development of highly efficient and cost-effective electrocatalysts for the sluggish oxygen evolution reaction (OER) remains a significant barrier to establish effective utilization of renewable energy storage systems and water splitting to produce clean fuel. The current status of the research in developing OER catalysts shows that NiFe-based oxygen evolution catalysts (OECs) have been proven as excellent and remarkable candidates for this purpose. But it is critically important to understand the factors that influence their activity and underlying mechanism for the development of state-of-the-art OER catalysts. Therefore, the development of in-situ/operando characterizations is urgently required to detect key intermediates along …