Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 1591 - 1620 of 1823

Full-Text Articles in Chemistry

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan Feb 2000

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan

Journal of Electrochemistry

By using a cost-effective wet process,dense yttria stabilized zirconia (YSZ) films on Ni-YSZ anode substrates have been prepared successfully. The YSZ film was characterized to be around 10 μm in thickness, sufficiently dense, uniform and crack free. A single solid oxide fuel cell fabricated from the supported YSZ film electrolyte on the anode substrate and a LSM cathode prepared on the YSZ film was tested. The power density reached to 0.1 W/cm2 at 800 ℃, showing a reasonable performance. Further analysis on both electrodes shows that the anodic overpotential was much larger than IR drop (including YSZ resistance and …

Go to article

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui Feb 2000

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui

Journal of Electrochemistry

A cathodic indirect electro-oxidation system was established for indirect electro-oxidize dimethyl sulfoxide to dimethyl sulfone with electro-eduction generated H2O2 catalyzed by the pertungstate/tungstate (WO52-/WO42-) redox mediator. Influences of current density, pH, temperature, and the current efficiencies etc. On the cathodic indirect electro-oxidation of dimethyl sulfone were investigated for determining optimum reaction conditions. The current efficiency reached more than 70%. Mother-liquid could be recycled to use without pollution.

Go to article

Studies On Methods Of Fuel Cells Electrodes Preparation, Jun Gu, Sheng Sui, Guang-Qiang Li, Zhitong Sui Nov 1999

Studies On Methods Of Fuel Cells Electrodes Preparation, Jun Gu, Sheng Sui, Guang-Qiang Li, Zhitong Sui

Journal of Electrochemistry

In fuel cells, the structure of electrodes is an important factor which effect the cell performance. To improve the structure and the performance of electrodes, a new method of providing fuel cell electrodes is proposed in this paper. PTFE (polytetrafluoroethylene) and ethyne black was ground for about half an hour in a high-speed grinder, then the catalyst was added into the grinder and milled for an hour. This milled catalyst was transferred into a mixer followed by the addition of surface-active agent. After a suspension was formed, it was filtered under vacuum condition.Then a thin uniform filter-cake of the catalyst …

Go to article

A Novel Reaction Region Moving Electrode System For Electrochemical Power Sources, Jin-Kua You, Que Tu, Zheng-Jian Wang, Jie Sun, Zu-Geng Lin Nov 1999

A Novel Reaction Region Moving Electrode System For Electrochemical Power Sources, Jin-Kua You, Que Tu, Zheng-Jian Wang, Jie Sun, Zu-Geng Lin

Journal of Electrochemistry

In most of practical rechargeable batteries, charging/discharging process is always concerned with phase-transformation in the solid state. Due to the irreversibility of the phase-transformation, the cyclic performance of the rechargeable batteries are limited. In this paper, a novel reaction-region moving counter electrode system is constructed in our laboratory. The electrode system is operated at room temperature and cycled in solid-liquid phase during charging/discharging processes. With this electrode, the metal-complexes are firstly deposited (i.e. charging process) on the nearest working electrode and gradually extended to those another working electrodes several centimeters away from the counter electrode. The deposite is dissolved again …

Go to article

Study On Electrochemical Reduction Properties Of Nitrobenzene, Chu-Na Ma, Wen-Kui Zhang, Hui Huang, Yong-Ping Gan Nov 1999

Study On Electrochemical Reduction Properties Of Nitrobenzene, Chu-Na Ma, Wen-Kui Zhang, Hui Huang, Yong-Ping Gan

Journal of Electrochemistry

The electrochemical reduction characteristics of nitrobenzene was extensively investigated by using the techniques such as quasi-steady-state polarization, cyclic voltammetry, fast linear potential sweep method and chronoamperometry in this paper. The electroanalytic properties of Cu, Cu-Hg and Cu-Ni electrodes were evaluated. Based on the study of the transient steping behaviour of nitrobenzene to PAP, the reduction mechanism was discussed. The results showed that the transition steps existed on the electrochemical reduction of nitrobenzene in acidic solution, the reactant is also absorbed on electrodes surface. The control step in the reduction of nitrobenzene was ascribed to the diffusion of nitrobenzene and its …

Go to article

High Performance Proton Exchange Membrane Fuel Cells, Jing-Rong Yu, Bao-Lian Yi, Ming Han, Xiao-Liang Cheng, Zhi-Gang Shao, Jing-Xin Zhang Nov 1999

High Performance Proton Exchange Membrane Fuel Cells, Jing-Rong Yu, Bao-Lian Yi, Ming Han, Xiao-Liang Cheng, Zhi-Gang Shao, Jing-Xin Zhang

Journal of Electrochemistry

Proton-exchange membrane fuel cells(PEMFC) using a perfluorosulfonic acid proton exchange membrane as an electrolyte can simplify water and electrolyte management. In this paper, the effects of thickness of PEM on the performance of PEMFC were studied. The Nafion-112 PEM and low platinum loading E-TEK electrode yielded very high power density, of the order of 0.95 W/cm2. The energy-conversion efficiency, the degree of platinum utilization and stability for PEMFC using Nafion 112 and E-TEK electrode were also investigated.

Go to article

Photoelectrochemical Studies On The Tio2 Nanostructured Porous Film Sensitized By Cyanine Dye, Li Zhang, Mai-Zhi Yang, Xue-Bin Qiao, Yan-Zhong Hao, En-Qing Gao, Sheng-Min Cai Nov 1999

Photoelectrochemical Studies On The Tio2 Nanostructured Porous Film Sensitized By Cyanine Dye, Li Zhang, Mai-Zhi Yang, Xue-Bin Qiao, Yan-Zhong Hao, En-Qing Gao, Sheng-Min Cai

Journal of Electrochemistry

The photoelectrochemical behaviors of the TiO2 nanostructured porous film sensitized by cyanine dye were investigated in this paper. The results showed that the excitaed state level matched the conduction band edge of TiO2 nanoparticle. Therefore the sensitization of the dye can increase the photocurrent intensity of the TiO2 nanostructured electrode obviously and results in a red-shift of optical absorption from the ultra-violet region to the visible. As a result, the light-to-electricity conversion efficiency was improved evidently, the maximum value of IPCE has reached 12.1%.

Go to article

Investigation Of Sodium Hypophosphite Anodic Oxidizing Behavior In The Process Of Acid Electroless Nickel Deposition, Mei-Yuan Wang, Ya-Fei Kuang, Yan Xu Nov 1999

Investigation Of Sodium Hypophosphite Anodic Oxidizing Behavior In The Process Of Acid Electroless Nickel Deposition, Mei-Yuan Wang, Ya-Fei Kuang, Yan Xu

Journal of Electrochemistry

The anodic oxidizing behavior of sodium hypophosphite in the process of electroless nickle deposition (pH=5.5) was investigated with the linear potential sweep method and alternating current impedance. The results indicated that, the oxidation of NaH2PO2 was a complicated electrochemical process and affected by the concentration of NaH2PO2, the temperature of the bath, the sweep rate and the existence of nickel ion. The NaH2PO2 electrooxidation reaction was very likely preceded by heterogeneous interface transformation process, which might be the control step of the whole anodic process.

Go to article

The Preparation Of Flexible Polymeric Anode And The Measurement Of Its Protective Ability For Cathodic Protection, Ai-Ling Du, He-Ming Zhang, Ming-Zong Zhang, Shi-De Ma Nov 1999

The Preparation Of Flexible Polymeric Anode And The Measurement Of Its Protective Ability For Cathodic Protection, Ai-Ling Du, He-Ming Zhang, Ming-Zong Zhang, Shi-De Ma

Journal of Electrochemistry

The flexible electrode, whose shape can be changed freely, was made of ethenyl copolymer and conductive component and proper amount of additive for cathodic protection. The resistance of electrode was measured.In low concentration of H2SO4, the flexible electrode can be used as auxiliary anode to protect the carbon steel. The protection ability of the flexible auxiliary anode was measured too.

Go to article

Studies Of The Electrode Preparation Of Electrode From Lead Carbonate For Lead Acid Batteryⅰ. The Activation Of The Pme, Zhong-Xu Dai, Di-Hua Wang, Jun-Wei Jiang, Yun-Hong Zhou, Jin-Yun Zou Nov 1999

Studies Of The Electrode Preparation Of Electrode From Lead Carbonate For Lead Acid Batteryⅰ. The Activation Of The Pme, Zhong-Xu Dai, Di-Hua Wang, Jun-Wei Jiang, Yun-Hong Zhou, Jin-Yun Zou

Journal of Electrochemistry

Lead carbonate which was an intermediate product in lead hydrometallurgy without pollution of lead vapor and sulfur dioxide was selected as electrode material of lead-acid batteries. In the present work, the performances of PbO2/PbSO4 or PbSO4/Pb electrode transformed from PbCO3 have been investigated by powder microelectrode technique combined with cyclic voltammetry. The results show that the CV characteristics of either negative or positive electrode prepared from PbCO3 is as good as that of both electrodes made from lead oxide produced by mill machine,when a powder microelectrode with PbCO3 transformed into PbSO 4 …

Go to article

The Studies Of The (Photo) Electrochemical Character On The Electrodeposited Silver Indium Selenium Thin Films, Shao-Ai Xie, Xun-Nan Deng, You-Jin Kua Nov 1999

The Studies Of The (Photo) Electrochemical Character On The Electrodeposited Silver Indium Selenium Thin Films, Shao-Ai Xie, Xun-Nan Deng, You-Jin Kua

Journal of Electrochemistry

A photoelectrochemical cell (PEC) is constructed, using an AgInSe2 film photoanode made from electrodeposition and a platinium electrode in aqueous polyiodide or polysufide electrolyte. The Voc and Isc of PEC have been tested and measured, and the effect of chemical decoration on the photoanodes also studied.

Go to article

The Electrochemical Behaviors Of Superoxide Dismutase At Promoter Modified Gold Electrode, Xia-Qin Wu, Xiao-Yun Meng, Zhe-Su Wang, Zong-Rang Zhang Nov 1999

The Electrochemical Behaviors Of Superoxide Dismutase At Promoter Modified Gold Electrode, Xia-Qin Wu, Xiao-Yun Meng, Zhe-Su Wang, Zong-Rang Zhang

Journal of Electrochemistry

The electron-transfer process of superoxide dismutase was investigated by cyclic voltammetry at the 4,4'-dithiodipyridine, L-cysteine, histidine and arginine modified gold wire electrodes repectively. The quasi-reversible behavior was observed at L-cysteine modified gold electrode. An irreversible electrochemical behavior has been observed at hisdinine modified gold wire electrode.

Go to article

Electro-Oxidation Of Phenol On Sno2/Ti Electrodes Prepared By Thermal Oxidation, Qing-Song Zhang, Hui-Huang Wu Nov 1999

Electro-Oxidation Of Phenol On Sno2/Ti Electrodes Prepared By Thermal Oxidation, Qing-Song Zhang, Hui-Huang Wu

Journal of Electrochemistry

A SnO2/Ti electrode prepared by thermal oxidation was used as the anode for galvanostatic electrolysis in acidic solution containing phenol, the time-dependances of phenol concentration, chemical oxygen demand in solution(COD) and instantaneous current efficiency were determined during electrolysis. The results show that with the SnO2/Ti anode instead of Pt, the COD significantly decreases at the same charge passage, and average current efficiency of oxidation increases by three times. The mechanism for phenol oxidation at two electrodes was discussed.

Go to article

Structural And Electrochemical Studies On Lithium Manganese Oxide Containing Li+ Prepared By Hydrothermal Method For Lithium Ion Batteries, De-Yao Liu, Jin-Kua You, Wei Chu, Yong Yang, Zu-Geng Lin Aug 1999

Structural And Electrochemical Studies On Lithium Manganese Oxide Containing Li+ Prepared By Hydrothermal Method For Lithium Ion Batteries, De-Yao Liu, Jin-Kua You, Wei Chu, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

In this paper, Todorokite manganese oxides containing Li+ with large tunnel structure (sample M5) have been synthesized by hydrothermal methods from natural manganese oxide nano fiber (sample M4). The structure and composition of the samples were characterized and analyzed by XRD, ICP, TGA and DTA. Its electrochemical behavior as a cathode materials for rechargeable lithium ion insertion were studied by galvanostatic charge/discharge measurements. XRD results show that the sample M4 is mainly composed of Birnessite and Vernadite structure. Although the sample M4 shows a high initial capacity of approximately 150 mAh/g, its performances decrease gradually over 30 cycles. It …

Go to article

Deactivation Of Nickel Oxide/Hydroxide To Electrooxidation Of H2Po2 Anions On Nickel Electrodes In Alkaline Solutions, Tai-Xiang Jiang, Hui-Huang Wu Aug 1999

Deactivation Of Nickel Oxide/Hydroxide To Electrooxidation Of H2Po2 Anions On Nickel Electrodes In Alkaline Solutions, Tai-Xiang Jiang, Hui-Huang Wu

Journal of Electrochemistry

Electrooxidation of hypophosphite anions on polycrystalline nickel in alkaline solutions has been investigated by cyclic voltammetry and open circuit potential measurements. The results are explained based on the mechanism that the first step of hypophosphite oxidation is the adsorption of hypophosphite ions on nickel, followed by the homolysis of its hydrogen bond with the formation of radicals. The oxidation of hypophosphite on nickel in alkaline medium occurs at lower potentials between ca. -0.8 V— -1.1 V (SCE) and phosphite ion is the only oxidation product. There is no indication of hypophosphite oxidation at higher potentials. Severe deactivation of the surface …

Go to article

Calculation Of Corrosion Rate Of Passive Metals With Charge Curve Analysis Technique, Yuan-Sheng Zhang, Min Gong Aug 1999

Calculation Of Corrosion Rate Of Passive Metals With Charge Curve Analysis Technique, Yuan-Sheng Zhang, Min Gong

Journal of Electrochemistry

This work contains two parts: (1) A charge curve equation having no appro-ximation for passivated metal corrosion systems is derived and compared with the routine charge curve equation, which is virtual only when the polarization is minim(linear range). (2) It is simpler to analyze charge curve data by from of charge differential equation than from charge curve equation. After the charge curve data are measured, the slope of charge curve is computed by numerical differentiation method, then the charge differential equation may be transformed to a set of linear equations using polynomial approximation. The electrochemical parameters of corrosion system would …

Go to article

Direct Electrolysis Of Seawater On Conducting Film For Microbial Anticorrosion 1. Simulation And Measurement Technique, Wei-Ling Hu, Ling-Ling Wu, Jing Zhou, Jing-Xin Li, Jin Luo, Zhong-Hua Lin Aug 1999

Direct Electrolysis Of Seawater On Conducting Film For Microbial Anticorrosion 1. Simulation And Measurement Technique, Wei-Ling Hu, Ling-Ling Wu, Jing Zhou, Jing-Xin Li, Jin Luo, Zhong-Hua Lin

Journal of Electrochemistry

Based on the electrochemical micro probe and the weak signal detection technique, simulated test and measurement system were set up by the use of four-electrode cell(including a micro electrode), bipotentiostat, lock-in amplifier and three-dimensional micro manipulating device. Based on the system, the micrometer scale concentration distribution of trace hypochlorite, which is produced by direct electrolysis of seawater on the conducting film for preventing microbial corrosion has been obtained for the first time. Both relationships between concentration of hypochlorite and its reduction current, which is termed an working curve, and between the reduction current of hypochlorite and measured time are reported.

Go to article

The Techniques Of The Paired Electrosynthesis, Hong-Kun Zhang, Deng-Ping Gu Aug 1999

The Techniques Of The Paired Electrosynthesis, Hong-Kun Zhang, Deng-Ping Gu

Journal of Electrochemistry

In this Paper, we introduce our work on paired electrosynthesis. In conjunction with our research practice, we introduce electrolytic conditions,such as material of electrode ,courrent density and electrolytic temperature etc,as reference for researcher. We categorize the paired electrosynthesis techniques to widen our view on the paired electroorganic synthesis and to promote the deveopments of paired electrosynthesis techniques.

Go to article

A Study Of The Corrosion On Bronze, Hong-Fan Zhu, Hao Zhou Aug 1999

A Study Of The Corrosion On Bronze, Hong-Fan Zhu, Hao Zhou

Journal of Electrochemistry

The bronze is the treasure in chinese metallic antique, which was typified by product in Shang-Zhou period (three thousands years ago). Because of corrosion, archaeological messages, such as inscription and pattern on the surface of bronze, would be damaged then the value of bronze antique decreased. The bronze disease is a common disease which forms powdery rust on the surface of bronze in atmospheric environment, the powdery rust emerge from under incrusted rust, then spreads, and eventually leads to bronze damaged. This paper investigates the bronze disease. According to the chemical and electrochemical tests in simulated occluded cell, the variation …

Go to article

Influence Of Thiourea And Its Derivate On The Process Of Cathodic Electrodeposition Of Copper, Yun-Hui Dong, Ai-Hong Zou, Yun-Xia Zhao Aug 1999

Influence Of Thiourea And Its Derivate On The Process Of Cathodic Electrodeposition Of Copper, Yun-Hui Dong, Ai-Hong Zou, Yun-Xia Zhao

Journal of Electrochemistry

The effects of thiourea and its derivate on the electrodeposition of copper from the dilute acid sulphate solutions have been studied by using potential sweep techniques at quasisteady state. Limiting current densities (Id), exchange current densities (i0) and αn are obtained by data processing with the least square method. Thiourea has a depolarizing effect on the copper depositing at concentrations below 8 mg·L-1, and a polarizing effect at higher concentration (>10 mg·L-1), and it changes the mechanism of copper deposition reaction. Propenyltiourea and Phenylthiourea have a depolarizing effect on the …

Go to article

The Effects Of Metallic Cobalt Abbition On The Performance Of Pasted Nickel Electrodes, An-Bao Yuan, Jian-Qing Zhang, Wan-Chun Ding, Shao-An Cheng, Chu-Nan Cao Aug 1999

The Effects Of Metallic Cobalt Abbition On The Performance Of Pasted Nickel Electrodes, An-Bao Yuan, Jian-Qing Zhang, Wan-Chun Ding, Shao-An Cheng, Chu-Nan Cao

Journal of Electrochemistry

The Ni-foam pasted nickel electrodes prepared by coprecipitated Ni1-XZnX(OH)2 with and without cobalt power addition have been studied. The electrode with addition of metallic cobalt showed a higher performance both in discharge capacity and cycle life. It is known from the experiment results that the addition of Co can remarkably increase the active material utilization which is suggested to be improvement of discharge depth due to the conducting CoOOH formed in the first activation charging. The superior capacity during cycling could be attributed to the synergistic action of zinc and cobalt addition ,especially to the …

Go to article

A New Method For Preparing Self-Assembled Lipid Bilayers On Pt Electrode, Peng Diao, Dian-Lu Jiang, Xiao-Li Cui, Deng-Ping Gu, Ru-Ting Tong Aug 1999

A New Method For Preparing Self-Assembled Lipid Bilayers On Pt Electrode, Peng Diao, Dian-Lu Jiang, Xiao-Li Cui, Deng-Ping Gu, Ru-Ting Tong

Journal of Electrochemistry

A new method for preparing Pt-supported bilayer lipid membrane (Pt-BLM) on Pt electrode cleaned by high power ultrasound was reported. The reported method was convenient, costing less platinum and could be used to form large-area Pt-BLM as compared with the traditional Pt-wire-cutting method. The electrical properties of Pt-BLM were studied using electrochemical impedance spectroscopy and cyclic voltammetry. Experimental results showed that the values of membrane capacitance and the voltammetric characteristics were consistent with those of Pt-BLM prepared by traditional method.

Go to article

Study On Synthesizing Of 2-Methylbutanoic Acid By Indirect Electrooxidation, Chong-Tao Zhao, Ze-Shan Zhu Aug 1999

Study On Synthesizing Of 2-Methylbutanoic Acid By Indirect Electrooxidation, Chong-Tao Zhao, Ze-Shan Zhu

Journal of Electrochemistry

The working conditions of synthesizing 2-methylbutanoic acid by oxidizing 2-methyl-1-butanol with tetrabutylammonium hydrosulfate (TBAS) or tetrabutylammonium perchlorate (TBAP) as phase transfer catalyst in sulfuric acid Cr(Ⅵ) oxidation medium was studied. The Cr(Ⅵ) oxidation medium could be electrolytic regenerated from Cr(Ⅲ), during above oxidation reaction. Under the optinum condition, the yield of 2-methylbutanoic acid is more than 95%.

Go to article

The Ac-Impedance Analysis For Pluse Oxide Film Of Aluminium Alloy, Ai-Ling Du, Xi-Cheng Ma, He-Ming Zhang Aug 1999

The Ac-Impedance Analysis For Pluse Oxide Film Of Aluminium Alloy, Ai-Ling Du, Xi-Cheng Ma, He-Ming Zhang

Journal of Electrochemistry

Bode diagrams for aluminum PC (abbreviated from pulse current) oxide films were first obtained by AC-impedance measurements in a wide range of frequency. The experimental results show that different kinds of electrical equivalent circuits can be used for representing PC films and DC (abbreviated from direct current) oxide films separately, the main differences between them are their porous layers, the PC films are more even with little defects.Those are also verified by SEM and V-I characteristic curve measurements.

Go to article

Electrochemical Synthesis Of Fes Electrode And Its Behavior Measurement, Cong-Sheng Guan Aug 1999

Electrochemical Synthesis Of Fes Electrode And Its Behavior Measurement, Cong-Sheng Guan

Journal of Electrochemistry

The Potential for the electrochemical synthesis of FeS electrode has been obtained by cyclic voltammetry. FeS electrodes were synthesiaed by controlling Fe electrode at -1.0 V in LiCl-KCl-Li2S and Li(FClI)-Li2S melts and their behavior were measured also. The FeS electrode synthesized in molten Li(FClI)-Li2S has the best charge and discharge properties.

Go to article

The Influential Factors On The Triboelectrochemical Behaviors Of The Passive Alloys, Dong-Bai Sun, Tao Li, Hong-Ying Yu, De-Jun Yang May 1999

The Influential Factors On The Triboelectrochemical Behaviors Of The Passive Alloys, Dong-Bai Sun, Tao Li, Hong-Ying Yu, De-Jun Yang

Journal of Electrochemistry

The tribocorrosion process of Fe-Cr alloys with different Cr content in H2SO4 solution was investigated. The influence of applied load, friction velocity, Cr content and concentration of H2SO4 in solution on the triboelectrochemical behaviors of the alloys was analyzed. It is shown that applied load and friction velocity have singnificant influence on the tribocurrent density in passive region when friction process occurs on part of the surface of alloy. Increasing the corrosion resistance of alloys or decreasing the aggressive of the solution can reduce the alloy removal velocity.

Go to article

A Study On The Cathode Protection Potential Against Pitting Corrosion, Chun-Chun Xu, You-Ping Liu, Xiao-Bo Zhang, Xu-Hui Zhao May 1999

A Study On The Cathode Protection Potential Against Pitting Corrosion, Chun-Chun Xu, You-Ping Liu, Xiao-Bo Zhang, Xu-Hui Zhao

Journal of Electrochemistry

The methods have been developed to determine the protection potential against pitting corrosion. They are based on the theory that the pitting protection potential (Ep) is actually the transition potential of the direction of current between the occluded cell and the external surface (ET). ET lasts from -220 mV to -440 mV (SCE), the lowest of which can be considered as cathode protection potential. The Ep values determined with cyclic potentiodynamic polarization method is included in the ET with above methods.

Go to article

The Adsorption Stability Of Interface Corrosion Inhibitor, Fu-Xing Gan, Di-Hua Wang, Jin-Yun Zou May 1999

The Adsorption Stability Of Interface Corrosion Inhibitor, Fu-Xing Gan, Di-Hua Wang, Jin-Yun Zou

Journal of Electrochemistry

Some new results on the adsorption stability of interface corrosion inhibitor are presented. The concept of adsorption stability and the factors influencing the adsorption stability were discussed. It is shown that the anodic desorption potential can be employed to evaluate the adsorption stability of the inhibitor as an empirical character in some conditions. Electrochemical oscillations phenomena were observed for the first time on a rotating iron electrode in H2SO4 solution containing organic inhibitor in the active potential region. These potentiostatic current oscillations can occur under cathodic polarization, as well as under anodic plarization. The oscillation period, amplitude, …

Go to article

The Influence Of Heat On The Measurement Of Photocurrent At The Anodic Film Of Nickel Electrode, Hang Chen, Zhi-Yu Jiang May 1999

The Influence Of Heat On The Measurement Of Photocurrent At The Anodic Film Of Nickel Electrode, Hang Chen, Zhi-Yu Jiang

Journal of Electrochemistry

The influence of heat on the measurement of photocurrent for nickel electrode in 1 mol/L NaOH solution was investigated by using the photocurrent, photothermal and thermal current methods. It was found that the appearance of photocurrent in potential region of -0.75~0.20 V (vs. Hg/HgO electrode) was due to the p-type semiconductor properties of Ni(OH)2 film in which is agree with the previous report. In the Ni(OH)2/NiOOH redox potential region, the increase of temperature at the surface of working electrode during irradiation significantly promoted the electrochemical reaction strongly. The photocurrent observed in potential region 0.20~0.57 V is mainly …

Go to article

Effects Of Nickel Content And Simulated Heat Affected Zone Of 2205 Duplex Stainless Steel On Pitting Corrosion, Horng-Yih Liou, Ju-Tung Lee, Wen-Ta Tsai, Rong-Iuan Hsieh, Yeongtsuen Pan May 1999

Effects Of Nickel Content And Simulated Heat Affected Zone Of 2205 Duplex Stainless Steel On Pitting Corrosion, Horng-Yih Liou, Ju-Tung Lee, Wen-Ta Tsai, Rong-Iuan Hsieh, Yeongtsuen Pan

Journal of Electrochemistry

The effects of nickel content and Gleeble simulated heat affected zone (HAZ) of 2205 stainless steel on pitting corrosion were investigated in this paper. The results showed that nickel content, ranging from 4.5 wt% to 6.5 wt% in base metal, had only a minor effect on the electrochemical polarization curves, with all Enp's and Epp's falling in the rang of 1100~1200 mV. Comparing with the base metal, the simulated HAZ microstructure caused an increase in the anodic current density, a distinct decrease in both Enp and Epp , and a reduction in the passive …

Go to article

First Prev Next Last