Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 1201 - 1230 of 1823

Full-Text Articles in Chemistry

Effects Of Direct Current Bias Potentials On Lipid Membranes Forming On A Glassy Carbon Electrode, Yu-Hui Li, Hong-Wei Zhang, Gui-Lan Song, Zhan-Jun Zhang, Sheng-Min Cai Feb 2007

Effects Of Direct Current Bias Potentials On Lipid Membranes Forming On A Glassy Carbon Electrode, Yu-Hui Li, Hong-Wei Zhang, Gui-Lan Song, Zhan-Jun Zhang, Sheng-Min Cai

Journal of Electrochemistry

The effects of direct current(DC) bias voltage on the structure of lipid membranes forming on a glassy carbon electrode(GCE) was investigated by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS).The experiment showed that the lipid membranes can be formed with either positive or negative bias potential exerted.When bias voltage was exerted,bilayer lipid membranes tended to form due to the electrostatic interaction between the superficial positive charges on the polarized electrode and the negative charged part of PC.When the positive bias voltage overrun the range,the lacunas on s-BLMs would increase,and the BLMs would be broken.A proper equivalent circuit was nonlinearly fitted,based on the …

Go to article

Composite Electroplating And Characterizations Of Sn-Sba15 Anode For Lithium-Ion Batteries, Xiao-Yong Fan, Jin-Mei Xu, Quan-Chao Zhuang, Hong-Hong Jiang, Ling Huang, Yan-Xia Jiang, Quan-Feng Dong, Shi-Gang Sun Feb 2007

Composite Electroplating And Characterizations Of Sn-Sba15 Anode For Lithium-Ion Batteries, Xiao-Yong Fan, Jin-Mei Xu, Quan-Chao Zhuang, Hong-Hong Jiang, Ling Huang, Yan-Xia Jiang, Quan-Feng Dong, Shi-Gang Sun

Journal of Electrochemistry

Sn-SBA15 anode was prepared by composite electroplating. The first discharge and charge capacity was 1075mAh/g and 630mAh/g respectively. After fifty charge/discharge cycles, the charge and discharge capacity of Sn-SBA15 were retained above 400mAh/g. XRD patterns indicated that the Sn-SBA15 has tetragonal crystal type. SEM images showed that the Sn-SBA15 had a honeycombed surface. EIS results indicated that there was SEI film formed on the surface of Sn-SBA15 electrode.

Go to article

Electrochemical Oxidation Of The Phenol In The Chloride System, Yong Liu, Dan Liu, Shi-Lin Zhao, Jing-Jing Lai Feb 2007

Electrochemical Oxidation Of The Phenol In The Chloride System, Yong Liu, Dan Liu, Shi-Lin Zhao, Jing-Jing Lai

Journal of Electrochemistry

The Ru-Ir /Ti electrode as cathode to electrolysis the synthetic phenolic wastewater was studied. The effect of the initial chloride concentration on the electrolytic treatment result has been discussed. Experiment result shows that the electrochemical oxidation of phenol suits to one kinetics equation in given electrolytic time. If the initial chloride concentration in wastewater increases, the time of the electrochemical oxidation of phenol can be shorten, in other words the apparent rate constant is greater. The middle matters of electrochemical oxidation of phenol in the chloride system detected out by HPLC and GC-MS is mainly 1-chloro-phenol, 4-chloro-phenol, 2,4-dichloro-phenol, 2,6-dichloro-phenol, 2,4,6-trichloro-phenol, …

Go to article

Diamond-Like-Carbon Film Prepared On Stainless Steel Substrates By Liquid Phase Electrochemical Deposition, Jing-Yong Du, Gui-Feng Zhang, Guo-Qing Li, Xiao-Duo Hou Feb 2007

Diamond-Like-Carbon Film Prepared On Stainless Steel Substrates By Liquid Phase Electrochemical Deposition, Jing-Yong Du, Gui-Feng Zhang, Guo-Qing Li, Xiao-Duo Hou

Journal of Electrochemistry

Diamond-like carbon (DLC) films were deposited on stainless steel substrates at atmospheric pressure and low temperature (60 ℃) by electrolysis in a methanol solution with a pulseddirect current power supply. The morphology and microstructure of the resulting DLC films were analyzed using atomic force microscopy(AFM), scanning electron microscopy (SEM), Raman spectroscopy and Fourier transformation infrared spectrometry (FTIR). The experimental results show that the hydrogenated diamond-like carbon filmsare smooth and compact. Raman spectroscopy analysis confirmed the presence of a strongpeak at 1332.51 cm-1, which is assigned to crystalline diamond. The deposition rate can be enhanced to 0.5 μm/h by …

Go to article

Comparison Of The Electrochemical Reactivity Of Electrodes Modified By Carbon Nanotubes With Different Sizes, Guo-Feng Yang, Neng-Qin Jia, Zhi-Yong Wang Feb 2007

Comparison Of The Electrochemical Reactivity Of Electrodes Modified By Carbon Nanotubes With Different Sizes, Guo-Feng Yang, Neng-Qin Jia, Zhi-Yong Wang

Journal of Electrochemistry

The electrochemical activity of multi-walled carbon nanotubes(MWNTs) with different sizes,including four different MWNTs with the same length and different diameter,two different MWNTs with the same diameter and different length has been assessed and compared.The various MWNTs modified electrodes were prepared by immobilizing the suitable amount of MWNTs onto a glassy carbon electrode,and their voltammetric responses to ferricyanide,uric acid and dopamine were examined.The corresponding cyclic voltammetric data was showed that the electrochemical and electrocatalytic activities are depended on the nanotube length.The electrochemical reactivity of short MWNT(S-MWNT) is better than that of long MWNT(L-MWNT),which may be mainly attributed to the existence of …

Go to article

Mwnts Modified Gc Electrode For Hydrogen Peroxide Determination, Hong-Juan Wang, Chun-Mei Zhou, Hao Yu, Feng Peng, Jin-Kun Fang Feb 2007

Mwnts Modified Gc Electrode For Hydrogen Peroxide Determination, Hong-Juan Wang, Chun-Mei Zhou, Hao Yu, Feng Peng, Jin-Kun Fang

Journal of Electrochemistry

A MWNTs modified GC electrode was constructed successfully to be used to detect hydrogen peroxide.Two methods of maximum anodic current of cyclic voltommogram and chronoamperometry were adopted to measure the concentration of hydrogen peroxide.The results show that the MWCNTs can enlarge the effective surface area of GC electrode and can enormously enhance the electron transfer.The sensitivity and correlation coefficient for hydrogen peroxide detection are 2.84 μA/mmol·L-1,0.997 and 1.5 μA/mmol·L-1,0.971 for cyclic voltammetry and chronoamperometry,respectively.The procedure of the two methods to detect hydrogen peroxide is simple,and the results obtained are satisfied.

Go to article

Influence Of Electrolyte On The Preparation And Electrocatalytic Properties Of Pt/Gc Electrodes, Sheng-Pei Chen, Yan-Xin Chen, Tao Huang, Xiao-Wen Hou, Shi-Gang Sun Feb 2007

Influence Of Electrolyte On The Preparation And Electrocatalytic Properties Of Pt/Gc Electrodes, Sheng-Pei Chen, Yan-Xin Chen, Tao Huang, Xiao-Wen Hou, Shi-Gang Sun

Journal of Electrochemistry

Influence of electrolyte on the electrocatalytic properties of Pt/GC electrodes for formic acid oxidation were studied by using cyclic voltammetry, SEM and electrochemical in situ FTIR spectroscopy. It has demonstrated that the surfaces of Pt/GC electrodes prepared in H2SO4 (Pt/GC1) or in HClO4(Pt/GC2) are all composed of platinum particles, but which crystals are some differences in size and shape.Diameters of platinum particles on the surface Pt/GC1 are of 100~200 nm, and with spheral shape in the majority. The sizes of platinum particles on the Pt/GC2 electrode are larger in general,part of particles is of cube …

Go to article

Preparation And Lithium Storage Performance Of Nano-Structural Sno2/Carbon Nanotubes Composite Electrodes, Hong-Bing Wei, Ling Huang, Xiao-Bin Wu, Fu-Sheng Ke, Jin-Shu Cai, Xiao-Yong Fan, Fang-Zu Yang, Shi-Gang Sun Feb 2007

Preparation And Lithium Storage Performance Of Nano-Structural Sno2/Carbon Nanotubes Composite Electrodes, Hong-Bing Wei, Ling Huang, Xiao-Bin Wu, Fu-Sheng Ke, Jin-Shu Cai, Xiao-Yong Fan, Fang-Zu Yang, Shi-Gang Sun

Journal of Electrochemistry

The Nano-structural SnO2/Carbon Nanotubes Composites were prepared in a solution of SnCl2,ethylene glycol(EG),purified MWCNTs and sodium dodecyl sulfate(SDS) at 160 ℃.The phase structure and surface morphology of the composites were measured by XRD HRTEM and SEM.The results indicate that there are high dispersions and high loadings of SnO2 nanoparticles on MWCNTs.Electrochemical lithium storage performance was studied preliminarily on the obtained samples.MWCNTs modified with SnO2 nanoparicles were shown to have a higher electrochemical reversible capacity than that of MWCNTs during the charge and discharge process.MWCNTs can accommodate the larger structure strain of the active materials …

Go to article

Study On The Electrochemical Machining Of Titanium Alloys Tc4 With The Method Of Uniform Design, Mei-Li Zhang, Di Zhu, Zheng-Yang Xu Feb 2007

Study On The Electrochemical Machining Of Titanium Alloys Tc4 With The Method Of Uniform Design, Mei-Li Zhang, Di Zhu, Zheng-Yang Xu

Journal of Electrochemistry

For the electrochemical machining of titanium alloys,a passivating film tends to form on the machining surface,which holdbacks the process of machining;and some corrosive pittings can appear on the non-machining surface,which leading to the poor surface quality.So how to improve the machining surface quality,this is a hot problem in aerospace industries.An experiment plan has been made with the method of uniform design and the variance analysis has been carried out using the result data of the previous experiments.The experimental results show that an excellent machining surface with Ra 0.38 μm would be obtained in the electrolyte of 10% NaCl solution,4% Na …

Go to article

Electrochemical Characteristics Of La0.7-XCeXMg0.3Ni2.4Co0.6(X=0～0.4) Hydrogen Storage Alloys, Ling-Ling Xiao, Yi-Jing Wang, Yi Liu, Jian-Sheng Cao, Da-Wei Song, Li-Fang Jiao, Hua-Tang Yuan Feb 2007

Electrochemical Characteristics Of La0.7-XCeXMg0.3Ni2.4Co0.6(X=0～0.4) Hydrogen Storage Alloys, Ling-Ling Xiao, Yi-Jing Wang, Yi Liu, Jian-Sheng Cao, Da-Wei Song, Li-Fang Jiao, Hua-Tang Yuan

Journal of Electrochemistry

The effect of partial substitution of Ce for La on the structure and the electrochemical properties of the La0.7-xCexMg0.3Ni2.4Co0.6(x=0～0.4)hydrogen storage alloys have been investigated systematically.The result of X-ray powder diffraction(XRD) show that the alloys are all consisted of the LaNi3 phase and the LaNi5 phase.The maximum discharge capacity is decreased gradually with increase of the Ce contents,but the cycling life is improved obviously.

Go to article

Fabrication And Performance Of Ni-Scsz Cermet Anode Modified By Coating With Gd0.2Ce0.8O2 For A Sofc, Ren-Zhu Liu, Bo Huang, Xiao-Feng Ye, Shao-Rong Wang, Jia-Di Cao, Huai-Wen Nie, Ting-Lian Wen Feb 2007

Fabrication And Performance Of Ni-Scsz Cermet Anode Modified By Coating With Gd0.2Ce0.8O2 For A Sofc, Ren-Zhu Liu, Bo Huang, Xiao-Feng Ye, Shao-Rong Wang, Jia-Di Cao, Huai-Wen Nie, Ting-Lian Wen

Journal of Electrochemistry

A Ni-scandia-stabilized zirconia(Ni-ScSZ) cermet anode modified by coating with nano-sized gadolinium-doped ceria(GDC,Gd0.2Ce0.8O2) was prepared using a simple combustion process for the solid oxide fuel cell(SOFC) running on methane fuel. X-ray diffraction(XRD) and scanning electron microscopy(SEM) indicated that the surface of Ni-ScSZ was coated by nano-sized GDC particles(<100nm). Single cell testing showed that the 2.0%(by mass) GDC-coated Ni-ScSZ anode had better performance. The highest power densities of the cell with this anode were 825 and 848mW/cm2 at 850℃ in humidified hydrogen and methane, respectively, whereas the corresponding values were 584 and 586mW/cm2 for the cell with Ni-ScSZ anode.Electrochemical impedance spectra(EIS) illustrated that the cell with Ni-ScSZ anode exhibited far greater impedances than the cell with 2.0%(by mass) GDC-coated Ni-ScSZ anode.Then the …

Go to article

The Influence Of Electrolytic Conditions On Synthesis Of Feo42-, Yan Zhou, Wei-Hua Yang, Dong-Qin Bi, Ting-Ting Huang, Zhen Sun, Quan-Feng Guo Feb 2007

The Influence Of Electrolytic Conditions On Synthesis Of Feo42-, Yan Zhou, Wei-Hua Yang, Dong-Qin Bi, Ting-Ting Huang, Zhen Sun, Quan-Feng Guo

Journal of Electrochemistry

The FeO42-was synthesized using iron lattice as anode and the solid K2FeO4 was also prepared.Influence of electrolytic conditions,such as stir,ultrasonic,temperature and current density on the current efficiency were studied.The results showed that preferable ferrate(VI) current yield was obtained in a current density of 10 mA·cm-2,temperature 30 ℃ and 14 mol/L NaOH as electrolyte under at stirring effect.

Go to article

Variable Frequence Switching Power Supply Used To Aluminum Foil Corrosion, Xiang-Dong Zhuo, Lan Sun, Guo-Qing Qian, Chang-Jian Lin Feb 2007

Variable Frequence Switching Power Supply Used To Aluminum Foil Corrosion, Xiang-Dong Zhuo, Lan Sun, Guo-Qing Qian, Chang-Jian Lin

Journal of Electrochemistry

A new variable frequence and multi-wave power supply used to aluminum foil corrosion is introduced. The switching supply power supply controlled by the microcontroller and Variable Frequence in low band and multi-wave, big power supply controlled by the electronic switch bridge for changing phase were designed. This power supply does not need bulky and cumbersome transformer, and the frequency at lower limit is not limited, even lower than 1Hz.

Go to article

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu Nov 2006

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu

Journal of Electrochemistry

The cooperative effects of trimethl phosphate and vinylene carbonate as additives for Li-ion batteries are investigated by using the cyclic voltammetry,electrochemical impedance spectroscopy and scanning electronic micro-photographs.The results show that the combination application of TMP and VC as additives for Li-ion batteries not only enhances safety of the batteries,but also improves their cycling performance.The reason may be ascribed to firstly VC being reduced and the reduction product polymerized to form excellent solid electrolyte interface(SEI) layer on the surface of graphite electrode during the first charge and discharge process,which prevents effectively the decomposition of TMP on the surface of the graphite …

Go to article

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou Nov 2006

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou

Journal of Electrochemistry

Silver(Ag) was deposited in the pores of Nafion membrane by ion exchange and succedent hydrogen reduction;the structures of Nafion-Ag membrane were measured by TEM and XRD,the diffusion coefficients of oxygen in Nafion-Ag was determined by electrochemical limited current method.The results showed that after deposited silver,the pores in the Nafion were enlarged by silver grains;the oxygen diffusion coefficient was increased about four times.By introducing silver in the thin Nafion film around the cathode catalyst,the performance of PEM fuel cell have a evident increasing in high current density, which shows the facilitated effects of silver to oxygen transportation in PEM fuel cell.

Go to article

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li Nov 2006

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li

Journal of Electrochemistry

Cathode materials LiNi1/3Co1/3Mn1/3O2 were prepared by low-heating solid-state reaction.The micro-structure and morphology of as-synthesized materials have been investigated by using XRD and SEM. The compatibilities of LiNi1/3Co1/3Mn1/3O2 with purchased LiPF6/ EC+DMC+DEC electrolyte and prepared LiBOB/EC+DEC+EMC electrolyte have also been studied. The Li/LiNi1/3Co1/3Mn1/3O2 batteries showed excellent electrochemical properties in the LiPF6/EC+DMC+DEC electrolyte. Reversible discharge capacities of 167, 163, 163, 157, 147mAh/g at 0.5C, 1C, 1.5C, 2C, 3C rate between 2.7~4.35 V, with stable cycling performances have …

Go to article

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen Nov 2006

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen

Journal of Electrochemistry

Electrochemical behavior of Bup has been investigated by means of cyclic voltammetry,linear sweep voltammetry,differential pulse voltammetry and square wave voltammetry.The results indicate that the electrochemical behavior of Bup on the surface of glassy carbon electrode is corresponding to a irreversible two-protons and two-electrons process with absrption.The square wave voltammetry for determination of Bup in actual samples has been established.

Go to article

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai Nov 2006

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai

Journal of Electrochemistry

A new electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate,gadolinium hexacyanoferrate(GdCHF),was prepared by electrochemically deposition on the surface of a glassy carbon electrode with a potential cycling procedure.The result of SEM indicated that the GdHCF was in the form of particles adhered on the surface of electrode.There were two different shapes and sizes of GdHCF forming on the surface of electrode.FTIR spectrum of GdHCF showed a very strong and sharp peak,which located at 2062.5 cm-1 and corresponded to the stretching vibration of the C≡N group in the GdHCF.The cyclic voltammetric results indicated that the GdHCF/GC electrode exhibited two …

Go to article

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang Nov 2006

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang

Journal of Electrochemistry

Monolithic carbon/nickel oxide composite materials were synthesized by carbonization of phenol formaldehyde gels that were ion-exchanged with Ni2+.Atomic absorption spectroscopy and powder X-ray diffraction technique were used to characterize the chemical composition and physical structure of the materials.The nickel dope amount for this method can reach 5.9 %(by mass).Subsequent cyclic voltammetry experiments indicate that the materials exhibit best capacitive performance at the nickel content of 4.4 %.

Go to article

Fabrication Of Gold Electrode Array Based On Co2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou Nov 2006

Fabrication Of Gold Electrode Array Based On Co2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou

Journal of Electrochemistry

A rapid process is described to produce single or multiple electrodes of any shape based on CO2 laser ablation for microfluidic chip.The method is as follow: coating a kind of material as sacrifice layer on a piece of glass with sputtered Cr and Au;designing the needed pattern on a computer;selecting proper parameters and ablating with CO2 laser;wiping of Au/Cr and sacrifice layer,and obtain electrodes at last.The microfluidic chip was gotten by reversely bonding with a piece of PDMS,and sealing around with PDMS prepolymer.The mask' effect is the main factor that influencing electrode quality.The width of electrodes could be …

Go to article

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma Nov 2006

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma

Journal of Electrochemistry

Gold nanocrystals with controllable size were synthesized through a simple electroreduction method using poly(N-vinylpyrrolidone)(PVP) of different polymerization degree as both stabilizer and shape-controller for gold nanoclusters.Individual gold nanoparticles spontaneously assembled into the wire-and ring-shaped nanoparticle aggregates depending on the PVP's dynamic stretching and curling,and precursor nanoparticles grew into flat,single-crystalline nanoprisms with thickness of dozens of nanometers based on the oriented aggregation between particles.Besides,core-shell Au/Ag nanoparticles were conveniently synthesized through two-step electroreduction of noble metal ions in the presence of PVPK30.The electrochemical synthetic method based on PVP provides a new path for preparation of noble metal nanostructured materials with different shape …

Go to article

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen Nov 2006

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen

Journal of Electrochemistry

Oxide and Pd on carbon composite catalysts have been prepared by intermittent microwave heating(IMH) method.The performance of the catalysts for glycerol oxidation in alkaline solution is studied by electrochemical techniques.It is shown that the Pd/C catalyst is active for glycerol electrooxidation.However,the oxide-Pd/C catalysts are even better in terms of the onset potential that is more negative and peak current density.The ratio of oxide to Pd is optimized according to the electrochemical measurement.The results reveal that the addition of oxide into the Pd/C induces the synergistic effect for glycerol electrooxidation.

Go to article

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu, Qi-Cai Shi, Ji-Ti Zhou, Bao-Jun Jia Nov 2006

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu, Qi-Cai Shi, Ji-Ti Zhou, Bao-Jun Jia

Journal of Electrochemistry

Treatment of pulping wastewater by using a novel electrochemical reactor,i.e.the three phase fluidized bed electrode,reactor were invesigated.The effects of air flow rate,applied voltage,pH value and FeSO4 concentration on electrolysis efficiency were investigated.It was clearly shown that the 20 V of voltage,0.3 m3·h-1 of air flow rate,1000 mg L-1 of FeSO4 concentration and pH≈2.5 were its best conditions.COD removal could be 70.1% under these conditions.

Go to article

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma Nov 2006

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma

Journal of Electrochemistry

Powder micro-electrodes were prepared from raw carbon nanotubes and carbon nanotubes modified by carboxyl.The electro-reduction properties of both the raw and open-ended carbon nanotubes in p-Nitrophenol solution were investigated.The FTIR spectrum result indicated that the functional groups are successfully fixed on the surface of the carbon nanotubes after nitric acid treatment.The cyclic voltammetry results show that the electrochemical activity of carboxyl-modified carbon nanotubes was improved.The mechanism of electro-(reduction) for the carbon nanotubes after acid treatment was discussed.

Go to article

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Su-Qin Liu, Ning Tan, Li-Quan Chen Nov 2006

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Su-Qin Liu, Ning Tan, Li-Quan Chen

Journal of Electrochemistry

The rate-determining step of V(Ⅳ) /V(Ⅴ) redoxreaction was investigated at graphite felt(GF)composite electrode by various techniques: cyclic voltammetry,polarization curve and impedance spectroscopy.Cyclic voltammetry analysis indicated that V(Ⅳ) /V(Ⅴ) redox reaction at GF electrode is quasi reversible.Acertain chemical reaction step is suspected to follow the electron transfer step of this reaction.The Tafel slopevalue(0.124) obtained from the polarization curve agrees well with theoretical value(0.12),which supposingthe electron transfer step was the rate-determining step.Impedance Spectroscopies at various potentials werestudied and simulated by equivalentcircuits.The impedance value of the electron transfer step modified is greatlyhigher than the others,which shows that the electron transfer step is the …

Go to article

The Synthesis, Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie, Zhen-Tao Zhou Nov 2006

The Synthesis, Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie, Zhen-Tao Zhou

Journal of Electrochemistry

The lithium iron phosphate cathode materials were synthesized by solid-state reaction combined high-rate ball milling under the temperature ranging from 400 ℃ to 700 ℃.The crystalline structure, morphology of particles, and electrochemical performance of the sample were investigated by X-ray diffraction, scanning electron microscopy and charge-discharge test. The results showed that the sintering temperature had great influences on the crystal structure, morphology and electrochemical performances of LiFePO4. The sample synthesized under 600℃ showed the best charge-discharge performances with the first specific discharge capacity of(128.8) mAh/g and the 15th specific discharge capacity of 129.1 mAh/g at 0.1C rate, …

Go to article

Structure And Electrochemical Characteristics Of Lifepo4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai Nov 2006

Structure And Electrochemical Characteristics Of Lifepo4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai

Journal of Electrochemistry

The cathode material of olivine LiFePO4 was prepared by a novel method of polyacrylate-pyrolysis-reduction.XRD demonstrates that the material have the olivine structure.SEM photo shows an average particle-size of about 100 nm with a well distribution.Electrochemical test of cycling at a constant current reveals the discharge capacity of 138 mAh/g and a good cycling stability.It is a novel practicable technology to prepare LiFePO4 by using polyacrylate-pyrolysis-reduction method.

Go to article

Electrodeposition Of Nano-Sb-Zn Alloy In Acetamide-Urea-Nabr-Kbr Melt, Peng Liu, Xin-Ai Guo, Ye-Xiang Tong, Qi-Qin Yang Aug 2006

Electrodeposition Of Nano-Sb-Zn Alloy In Acetamide-Urea-Nabr-Kbr Melt, Peng Liu, Xin-Ai Guo, Ye-Xiang Tong, Qi-Qin Yang

Journal of Electrochemistry

The electroreduction of Zn(II) and Sb(III) in acetamide-urea-NaBr-KBr(343 K) were studied by cyclic volatmmetry.The reduction of Zn(II) or Sb(III) to the metals is an irreversible process.The transfer coefficient of Zn(II)+2e→Zn and Sb(III) +3e→Sb were calculated to be 0.231 and 0.319,the diffusion coefficient of Zn(II) and Sb(III) in the melt were determined as 1.70*10-6 and 3.21*10-6 cm2· s-1 respectively.The Zn-Sb films with different Zn content from 29.67 at% to 97.34 at% were electrodeposited in acetamide-urea-NaBr-KBr melt at 343 K by controlling the deposition potential and the Zn(II)/Sb(III) molar ratio.The morphology of Zn-Sb film was observed by …

Go to article

Investigations On Electrochemical Characteristics Of Liv3O8 Electrode In Lithium Sulfate-Water-Ethanol Electrolytes, An-Bao Yuan, Wei-Xiang Song Aug 2006

Investigations On Electrochemical Characteristics Of Liv3O8 Electrode In Lithium Sulfate-Water-Ethanol Electrolytes, An-Bao Yuan, Wei-Xiang Song

Journal of Electrochemistry

The active material of LiV3O8 prepared using low-temperature pre-reaction in solution followed by intermediate-temperature calcination at 450 ℃.The product was characterized by X-ray diffraction analysis and scanning electron microscope observation.The performance of LiV3O8  electrode in neutral lithium sulfate-water-ethanol electrolytes was investigated using electrochemical methods.Galvanostatic charge/discharge results indicated that the specific capacity of LiV3O8  electrode decreases with ethanol content increasing in electrolyte.The most appropriate water/ethanol volumetric ratio is 4 ∶1 in terms of conductivity of the electrolyte and stability of the electrode.AC impedance measurements demonstrated that the ohmic resistance of the electrolyte …

Go to article

The Influence Of Pva As Disperser On Lifepo4 Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan, Yu-Hong Zhou Aug 2006

The Influence Of Pva As Disperser On Lifepo4 Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan, Yu-Hong Zhou

Journal of Electrochemistry

LiFePO4 was synthesized by means of hydrothermal reaction,in which PVA acts as disperser and glucose as carbon source. The samples were characterized by X-ray diffraction, scanning electron microscopy and electrochemical measurement. SEM results show that the sample is homogeneously composed of grains with a particle size of ca.200nm. In the charge/discharge test, the products exhibited a 3.45V discharge voltage plateau and a maximum specific capacity of 140mAh/g. After 40 cycles, its capacity only declined by 2.1%. Besides these, the mechanism for the influence of the particle size and carbon coating on the electrochemical property of LiFePO4 material was …

Go to article

First Prev Next Last