Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 961 - 990 of 1376

Full-Text Articles in Chemistry

An In Situ Fourier Transform Infrared Spectroelectrochemical Study On Alcohols Electrocatalytic Oxidation At Pd Electrode In Acidic Solution, Hai-Ping Huang, Lian-Qin Wang, Pei-Kang Shen Aug 2010

An In Situ Fourier Transform Infrared Spectroelectrochemical Study On Alcohols Electrocatalytic Oxidation At Pd Electrode In Acidic Solution, Hai-Ping Huang, Lian-Qin Wang, Pei-Kang Shen

Journal of Electrochemistry

The methanol and ethylene glycol electrooxidation on palladium electrode in acidic solution has been investigated by cyclic voltammetry and in situ Fourier transform infrared spectroelectrochemistry. It shows that the oxidation of methanol and ethylene glycol at Pd electrode cannot proceed until over 1.5 V in acidic and neutral media. The overpotential decreases and the peak current density increases with the reduction in pH values. The formation of the oxygen-containing species significantly affects the alcohol oxidation on Pd electrode. The in situ FTIR spectroscopic measurements show that the oxidation products of ethylene glycol on Pd electrode are CO2 and oxalic …

Go to article

Comparative Study Of Nanoporous Pt, Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Aicheng Chen Aug 2010

Comparative Study Of Nanoporous Pt, Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Aicheng Chen

Journal of Electrochemistry

In recent years much effort has been put towards developing efficient Pt-based electrocatalysts for applications in fuel cells. With the rising cost of precious metals such as Pt,the need to enhance the activity and to decrease the load of catalysts is prominent. Herein we report on the synthesis and comparative study of nanoporous Pt,PtRu and PtRuIr electrocatalysts. The nanoporous electrodes were fabricated using a hydrothermal method and characterized by scanning electron microscopy (SEM) ,energy dispersive spectroscopy (EDS) ,X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) . The electrocatalytic activity of the fabricated nanopo- rous materials was evaluated using both CO …

Go to article

2,4,6-Tri­Phenyl­Aniline, Onome Ugono, Stephanie Cowin, Alicia M. Beatty Jul 2010

2,4,6-Tri­Phenyl­Aniline, Onome Ugono, Stephanie Cowin, Alicia M. Beatty

Educator Preparation & Leadership Faculty Works

No abstract provided.

Go to article

Optimization Of Membrane Electrode Assembly In Air-Breathing Direct Methanol Fuel Cell, Liang Ma, Wei-Wei Cai, Jing Zhang, Liang Liang, Jian-Hui Liao, Chang-Peng Liu, Wei Xing May 2010

Optimization Of Membrane Electrode Assembly In Air-Breathing Direct Methanol Fuel Cell, Liang Ma, Wei-Wei Cai, Jing Zhang, Liang Liang, Jian-Hui Liao, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The structure and performance of MEA were optimized by tailoring the catalyst layer,cathodic microporous layer (MPL) ,anodic MPL and membrane,with the considerations of unique characteristics of airbreathing direct methanol fuel cell (DMFC) such as methanol crossover and cathode flooding. It was found that high catalyst loading could suppress the methanol crossover effectively,but too high catalyst loading can lead to high mass transport resistance. Hydrophobic anodic MPL with 30% (by mass) PTFE could facilitate the CO2 bubble detachment,which decreased the methanol concentration gradient and suppressed the methanol crossover accordingly. When Nafion 115 was used as membrane,methanol crossover was severe,while Nafion …

Go to article

Electrocatalytic Oxidation Of Hcooh At Au(Core)-Pd(Shell)-Pt(Cluster) Nanocubes, Qing-Ning Jiang, Huan Li, Ning Yang, Ping-Ping Fang, Feng-Ru Fan, Zhong-Qun Tian May 2010

Electrocatalytic Oxidation Of Hcooh At Au(Core)-Pd(Shell)-Pt(Cluster) Nanocubes, Qing-Ning Jiang, Huan Li, Ning Yang, Ping-Ping Fang, Feng-Ru Fan, Zhong-Qun Tian

Journal of Electrochemistry

Gold nanocubes were synthesized by a two-step seed-mediated growth method. The Aucore-Pdshell and Aucore-Pdshell-Ptcluster nanocubes with controllable shell thickness of Pd and cluster coverage of Pt were synthesized by simply changing the amount ratio of H2PdCl4 or H2PtCl6. The samples were characterized by scanning electron microscope (SEM) , transmission electron microscopc (TEM) and cyclic voltammetry (CV). CV was then used to make a systematic study on the dependence of the electrocatalytic properties on the shell thickness of Aucore-Pdshell and Pt coverage of Aucore-Pd …

Go to article

Synthesis Of Cosalen Composite In Apo-5 And Its Electrocatalytic Behaviour For Reaction Of Dioxygen Reduction, Rong Zhang, Li-Hua Tang, Bin-Bin Fan, Jing-Hong Ma, Rui-Feng Li May 2010

Synthesis Of Cosalen Composite In Apo-5 And Its Electrocatalytic Behaviour For Reaction Of Dioxygen Reduction, Rong Zhang, Li-Hua Tang, Bin-Bin Fan, Jing-Hong Ma, Rui-Feng Li

Journal of Electrochemistry

CoAPO-5 molecular sieve was hydrothermally synthesized. The Cobalt ions in CoAPO-5 were coordinated with the SALEN ligend diffusing into the channels of the molecular sieve to form CoSALEN complexes. The electrochemical behaviors and electrocatalysis for dioxygen reduction of the CoSALEN complex immobilized in APO-5 modified glassy carbon electrodes (GCEs) have been investigated by cyclic voltammetry (CV) and chronoamperometry (CA) in differrent pH aqueous solutions. The results showed that the PS/CoSALEN/APO-5 /GC modified electrode is of the high electrocatalytic activity towards dioxygen reduction in pH 6. 86 buffer solution with a reduced overpotential of 447 mV lower than bare GC electrode. …

Go to article

Hydrogen Evolution Reaction Activtity Of Ni-Ru-Ir Oxide Cathode Coating, Yin-Hui Fu, Xue-Ming Li, Wu-Lin Li, Jun Zhang May 2010

Hydrogen Evolution Reaction Activtity Of Ni-Ru-Ir Oxide Cathode Coating, Yin-Hui Fu, Xue-Ming Li, Wu-Lin Li, Jun Zhang

Journal of Electrochemistry

The Ni-Ru-Ir electrode coating was fabricated by thermal decomposition and oxidation. Electrochemical properties of Ni-Ru-Ir electrode coating and pure nickel cathode in the 30% NaOH solutions at 90 ℃(conditions of the industrial electrolysis) ,have been investigated by cyclic voltammetry,Tafel curves and chronoamperometry. The results show that the Ni-Ru-Ir oxide electrode coating exhibited high catalytic activity. At the current density of 0. 3 A·cm-2,the lowest hydrogen evolution overpotential of Ni-Ru-Ir oxide electrode coating was about 300 mV lower than Ni. The roughness and excharge current density of Ni-Ru-Ir electrode coating were 32 and 4 times,respectively,larger than those of pure …

Go to article

Synthesis And Electrochemical Properties Of Li3V2(Po4)3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai May 2010

Synthesis And Electrochemical Properties Of Li3V2(Po4)3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai

Journal of Electrochemistry

Cathode material Li3V2(PO4) 3 /C for Lithium-ion battery was synthesized by combination of ball milling and baking. Physical and electrochemical performances of as-prepared materials were characterized through XRD,EIS and galvanostatic cell cycling. The results show that the products were monoclinic Li3 V2 (PO4) 3 with well-developed crystal structure. At 0. 1C,0. 25C and 0. 5C,the initial discharge capacities were 150. 6,134. 1 and 107. 1 mAh·g-1 ,respectively. Capacity retention rates were 87. 3% after 130 cycles at 0. 25C and 87. 2% after 105 cycles at 0. 5C. Charge-discharge …

Go to article

Nano-Sized Au On Nickel Foam As Cathode Of Alkaline Al-H2O2 Semi Fuel Cell, Shu-Li Chen, Bang-An Lu, Yao Liu, Gui-Ling Wang, Dian-Xue Cao May 2010

Nano-Sized Au On Nickel Foam As Cathode Of Alkaline Al-H2O2 Semi Fuel Cell, Shu-Li Chen, Bang-An Lu, Yao Liu, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

Nano-sized Au particles were deposited on a nickel foam substrate by a fast spontaneous deposition method using AuCl3 as the source of Au. The effects of AuCl3 concentration and deposition time on the size and distribution of Au particles,and the performance of the obtained Au/Ni electrode as the cathode of Al-H2O2 semi fuel cell were investigated. It was found that after the nickel foam was immersed in a 2 mmol·L-1 AuCl3 solution for 60 s,Au particles with diameters smaller than 100 nm were deposited on its surfaces and cover the surface completely. The …

Go to article

Preparation Of Styrene Acrylic Copolymer Toner Resin By Solution Polymerization., Neo Su Siang Apr 2010

Preparation Of Styrene Acrylic Copolymer Toner Resin By Solution Polymerization., Neo Su Siang

Student Works (2010-2019)

This project has investigated solution polymerization to produce toner resins. There are three stages: (i) synthesis of low molecular weight styrene acrylic copolymer; (ii) synthesis of high molecular weight styrene acrylic copolymer; (iii) mixing high and low molecular weight copolymers. Gel Permeation Chromatography (GPC) was used to study molecular weight distributions, Melt Flow Index (MFI) Instrument to study the flowability of resin, Differential Scanning Calorimetry (DSC) to study the thermal properties of resin, and acid number to quantitate the amount of acidic group in the resin. A comparison of properties between the experimental samples, patent’s claims, and commercial resins had …

Go to article

The Synthesise Of Electron-Conducting Redox Hydrogel And Its Application In Microbial Fuel Cell, Kai-Peng Wang, Sheng-Li Chen Feb 2010

The Synthesise Of Electron-Conducting Redox Hydrogel And Its Application In Microbial Fuel Cell, Kai-Peng Wang, Sheng-Li Chen

Journal of Electrochemistry

Efficient electron transfer between the microbe and the anode is key for the electricity generation in Microbial fuel cell(MFC).Through the modification of anode,the rate of electron transfer can be accelerated,therefore the performance of MFC can be enhanced.In this paper,we report the synthesis of a type of electronconducting and bio-compatible redox hydrogel and its application.The hydrogel consists of poly(4-vinylpyridine) as backbone and neutral red as the redox center.By immobiliazing neutral red on the backbone through covalent bond,the secondary contamination due to the soluble redox mediator to external environment can be prevented.MFCs using the hydrogel-modified carbon anode significantly exhibit shorter acclimation period,and …

Go to article

Investigation Of Ceo2 As Cathode Electrocatalyst For Direct Borohydride Fuel Cell, Xue-Min Ni, Ya-Dong Wang, Mu Pan Feb 2010

Investigation Of Ceo2 As Cathode Electrocatalyst For Direct Borohydride Fuel Cell, Xue-Min Ni, Ya-Dong Wang, Mu Pan

Journal of Electrochemistry

The performance of CeO2 as oxygen reduction electrocatalyst in direct borohydride fuel cell was investigated.The experimental results indicate that CeO2 shows significant electrocatalytic performance for oxygen reduction and exhibits no observed promotion effect on hydrolysis or electro-oxidation of BH4-.The power density of experimental one-compartment fuel cell with CeO2 as cathode electrocatalyst can reach a 67.8 mW·cm-2 at room temperature.

Go to article

Synthesis Of High-Performance Lini1/3Co1/3Mn1/3O2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng Feb 2010

Synthesis Of High-Performance Lini1/3Co1/3Mn1/3O2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng

Journal of Electrochemistry

Layered LiNi1/3Co1/3Mn1/3O2 is one of the most promising alternative materials for LiCoO2 in lithium ion batteries due to its low cost,large capacity and excellent cyclability.In this paper,LiNi1/3Co1/3Mn1/3O2 was synthesized via azeotropic distillation method with isobutyl alcohol as an azeotropic agent.The structure and surface morphology were characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM),respectively.The as-prepared LiNi1/3Co1/3Mn1/3O2 shows a layered α-NaFeO2 structure;the particles are small and uniformly distributed.As compared with the sample prepared by traditional method,the present cathode material …

Go to article

Electrocatalytic Reduction Of L-Cystine At Pb/Nanotio2 Film Electrode, Dao-Bao Chu, Feng Wang, Ying Xiao, Xue-Jiao Zhang Feb 2010

Electrocatalytic Reduction Of L-Cystine At Pb/Nanotio2 Film Electrode, Dao-Bao Chu, Feng Wang, Ying Xiao, Xue-Jiao Zhang

Journal of Electrochemistry

The nanoporous Ti-based TiO2 films electrodes modified with Pb particles(Pb/nanoTiO2) were prepared by using anodization and potentiostatic electro-deposition.The optimum deposition conditions were determined by comparing with various deposition potentials and time.The SEM analyses indicated that the TiO2 films were homogeneous nanoporous structure,and the Pb particles well dispersed on the TiO2 films.The L-cystine electrocatalytic activity reduction on the Pb/nanoTiO2 film electrodes was investigated by cyclic voltammetry and Chronoamperometric curves.The results showed that this type of the electrode posseses high acticity and stability.

Go to article

Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Lscm-Ceo2 Catalyst Layer In Thin Film Sofc, Yun-Yun Wang, Bo Huang, Xin-Jian Zhu, Wan-Qi Hu, Qing-Chun Yu Feb 2010

Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Lscm-Ceo2 Catalyst Layer In Thin Film Sofc, Yun-Yun Wang, Bo Huang, Xin-Jian Zhu, Wan-Qi Hu, Qing-Chun Yu

Journal of Electrochemistry

Solid oxide full cell(SOFC) running directly on hydrocarbon fuels has attracted much attention in recent years. In this paper, a dual-layer structure anode was fabricated by tape casting and screen printing method. The addition of a LSCM-CeO2 catalyst layer to the supported anode surface yielded better performance in ethanol fuel. The maximum power density reached 710 and 669 mW/cm2 at 850 ℃ running on hydrogen gas steam and ethanol steam,respectively. No significant degradation in performance has been observed after 216 h of cell testing when the Ni-ScSZ13 anode was exposed to the ethanol steam at 700 ℃. Very …

Go to article

Electrosynthesis Of P-Aminobenzenearsenic Acid, Chun-An Ma, Qin-An Zheng, Qiang Zhou, Ying-Hua Xu Feb 2010

Electrosynthesis Of P-Aminobenzenearsenic Acid, Chun-An Ma, Qin-An Zheng, Qiang Zhou, Ying-Hua Xu

Journal of Electrochemistry

The electrochemical reduction of p-nitrophenyl arsonit acid to p-aminobenzenearsenic acid was studied using controlled-current electrolysis.The results showed that the yield of p-aminobenzenearsenic acid was determinated by the following factors:the concentrations of sulphuric acid,the amount of additive,temperature and the concentrations of p-nitrophenyl arsenic acid.The optimum electrolytic conditions were obtained to be is 10% H2SO4,1% NaCl,80 ℃,25 g/350 mL p-nitrophenyl arsenic acid and 10 A·dm-2.The yield of arsanilic acid could be reached 64.7% under the optimum electrolytic conditions.

Go to article

Design And Development Of Highly Active, Nanoengineered, Platinum Based Core-Shell Electrodes For Proton Exchange Membrane Fuel Cells, Seth Louis Knupp Jan 2010

Design And Development Of Highly Active, Nanoengineered, Platinum Based Core-Shell Electrodes For Proton Exchange Membrane Fuel Cells, Seth Louis Knupp

Legacy Theses & Dissertations (2009 - 2024)

Highly active nanoengineered core-shell electrocatalyst have a great potential to be used as fuel cell electrodes. They can alleviate problems related with commercial carbon supported platinum by simultaneously lowering cost while enhancing reaction kinetics and overall performance. More recently, use of nanoengineered core-shell electrode structures have showed their ability to enhance the stability and overall lifetime of the catalyst without sacrificing the electrode's performance. We studied the potential of using highly active core-shell nanoparticles supported on carbon nanomaterials as fuel cell electrodes.

Go to article

Characteristics Of Proton Conducting Pva-Chitosan Polymer Blend Electrolytes., Mohd Fakhrul Zamani Abdul Kadir Jan 2010

Characteristics Of Proton Conducting Pva-Chitosan Polymer Blend Electrolytes., Mohd Fakhrul Zamani Abdul Kadir

Student Works (2010-2019)

The main focus of this present work is to build a good conducting solid polymer electrolyte (SPE) based on chitosan and poly(vinyl alcohol)(PVA) blend. Solution cast technique has been employed to produce sample films in this work. From the scanning electron micrographs (SEM) the surface morphology of the blend containing 40 wt.% chitosan and 60 wt.% PVA (C4P6) is homogenous and miscible in one and another. The C4P6 film is the most amorphous and is the best candidate for the polymer host in the electrolyte systems studied in the present work. Ammonium Nitrate (NH4NO3) is the doping salt that provides …

Go to article

Electrodeposition Of Tin Using Tin (Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee Jan 2010

Electrodeposition Of Tin Using Tin (Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee

Student Works (2010-2019)

The electrodeposition of tin from Tin(II) Methane Sulfonate (MSA) with varying concentration in air and water stable 1-butyl-1-methyl-pyrrolidinium trifluoromethanesulfonate, (BMPOTF) ionic liquid at room temperature was studied. Cyclic Voltammetry served to characterize the electrochemical behavior of tin reduction and oxidation. The diffusion coefficient of stannous ions in the mixture of BMPOTF ionic liquid and MSA based electrolyte obtained via Randles-Sevcik and Cottrell equation was 2 × 10-7 cm2/s. Electroplating on copper panel was conducted under different current densities to determine BMPOTF based tin plating solution current efficiency. Mixture of BMPOTF and MSA based tin plating solution gave current efficiency as …

Go to article

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadhel A. A. Alsanabani Jan 2010

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadhel A. A. Alsanabani

Student Works (2010-2019)

A slightly branched urethane acrylate macromer (UAM) was synthesized by reacting palm oil-based polyol with excess amounts of polymeric methylene diphenyl diisocyanate (MDI) to form urethane prepolymer, then reacted with 2-hydroxyethyl methacrylate (HEMA) and FT-IR spectroscopy confirmed the urethane and grafted acrylate groups. 0.2% by weight of camphoroquinone (CQ) and 0.8% by weight of ethyl-4-N,N-dimethylamino-benzoate (4EDMAB) by weight were added to render the experimental resins light-curable. Their viscosity, percentage of degree of conversion (%DC) and cross-linking density (CLD), percentage of volumetric polymerization shrinkage (%VPS), water sorption and solubility, flexural strength, modulus of elasticity and toughness were determined and compared to …

Go to article

Thermo-Electrical And Mechanical Studies On Polymer-Organically Modified Montmorillonite Composite., Norhana Abdul Halim Jan 2010

Thermo-Electrical And Mechanical Studies On Polymer-Organically Modified Montmorillonite Composite., Norhana Abdul Halim

Student Works (2010-2019)

The field of polymer-nanoclay composite has attracted a lot of attention in materials studies due to the dramatic improvement on polymers characteristics. For example mechanical and thermal properties, chemical resistance as well as the reduced gas permeability. However, structural changes and the mechanisms that may contribute to these improvements are not fully understood. In this work, the study on polymer nanoclay composite concentrates on the effects of OMON inclusion within different polymer matrix systems. The matrixes are a series of natural rubbers (Standard Malaysia Rubber – Latex grade (SMRL); Deproteinized Natural Rubber (DPNR) and Epoxidized Natural Rubber (ENR-50)), plasticized Polyvinyl …

Go to article

Electrical And Structural Studies Of Polyacrylonitrile (Pan) Complexed With Inorganic Salts., Khairul Bahiyah Md Isa Jan 2010

Electrical And Structural Studies Of Polyacrylonitrile (Pan) Complexed With Inorganic Salts., Khairul Bahiyah Md Isa

Student Works (2010-2019)

In the present study, polymer electrolyte films composed of polyacrylonitrile (PAN) as a host polymer, ethylene carbonate (EC) as the plasticizer and lithium triflate (LiCF3SO3) and sodium triflate (NaCF3SO3) as dopant salts were prepared by the solution cast technique. Five systems of polymer electrolytes films have been prepared; these systems are the plasticized-PAN system i.e. PAN-EC system, two salted-PAN systems i.e. PAN-LiCF3SO3 and PAN-NaCF3SO3, and two plasticized-salted PAN systems i.e. PAN-EC-LiCF3SO3 and PAN-EC-NaCF3SO3. The pure PAN film was prepared as a reference. The ionic conductivity for each system is characterized using impedance spectroscopy. The room temperature conductivity of the pure …

Go to article

Synthesis Of Chromium-Based Ziegler-Natta Catalysts And Thier Application In Ethylene Polymerization And Copolymerization., Wong Jun Xuan Jan 2010

Synthesis Of Chromium-Based Ziegler-Natta Catalysts And Thier Application In Ethylene Polymerization And Copolymerization., Wong Jun Xuan

Student Works (2010-2019)

Four chromium-based oxo-trinuclear carboxylate complexes were prepared by reacting Cr(NO3).9H2O with acetic acid and substituted carboxylic acids to produce [Cr3O(CH3COO)6.3H2O]NO3.7H2O,[Cr3O(ClCH2COO)6.3H2O]NO3.3H2O, [Cr3O(Cl2CHCOO)6.3H2O]NO3.H2O and [Cr3O(Cl3CCOO)6.3H2O]NO3.2H2O, which alysis (TGA).Chromium content in each complex was determined by titrimetry method and the result was in good agreement with that from TGA. Chromium(III)monochloroacetate complex[Cr3O(ClCH2COO)6.3H2O]NO3.3H2O in combination with diethylaluminium chloride formed heterogeneous catalyst system for ethylene polymerization and ethylene-propylene copolymerization. Both Al/Cr ratio and temperature influenced the catalytic activity. The maximum activity of ethylene polymerization was 1768 gPE/gCr/hr/atm, achieved by polymerizing ethylene at 29°C with Al/Cr ratio 30.8. Effect of chloro-substituent groups on carboxylic ligand was studied …

Go to article

Electrodeposition Of Tin Using Tin(Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee Jan 2010

Electrodeposition Of Tin Using Tin(Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee

Student Works (2010-2019)

The electrodeposition of tin from Tin(II) Methane Sulfonate (MSA) with varying concentration in air and water stable 1-butyl-1-methyl-pyrrolidinium trifluoromethanesulfonate, (BMPOTF) ionic liquid at room temperature was studied. Cyclic Voltammetry served to characterize the electrochemical behavior of tin reduction and oxidation. The diffusion coefficient of stannous ions in the mixture of BMPOTF ionic liquid and MSA based electrolyte obtained via Randles-Sevcik and Cottrell equation was 2 × 10-7 cm2/s. Electroplating on copper panel was conducted under different current densities to determine BMPOTF based tin plating solution current efficiency. Mixture of BMPOTF and MSA based tin plating solution gave current efficiency as …

Go to article

Electrooxidation Of Formic Acid On Pd-Ni Alloy Film Electrode-The Effect Of Dealloying, Chao Wang, Fei-Fei Shi, Jin-Yi Wang, Han-Xuan Zhang, Wen-Bin Cai Nov 2009

Electrooxidation Of Formic Acid On Pd-Ni Alloy Film Electrode-The Effect Of Dealloying, Chao Wang, Fei-Fei Shi, Jin-Yi Wang, Han-Xuan Zhang, Wen-Bin Cai

Journal of Electrochemistry

A Pd-Ni alloy film was electrodeposited on Au disc electrode at a constant potential from a weakly basic bath containing PdCl2,NiSO4 and ethylenediamine.The as-deposited film was then subjected to potential cycling in a perchloric acid solution for surface dealloying treatment.The dealloyed Pd-Ni film electrode was examined for the electrocatalytic oxidation of formic acid,and compared with the as-deposited one as well as a Pd film electrode.The FE-SEM and electrochemical measurements on the Pd-Ni films revealed that the dealloying treatment caused a surface roughening and an increase in specific surface reaction area.The ICP-AES and XPS analyses demonstrated that the …

Go to article

Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun Nov 2009

Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun

Journal of Electrochemistry

Adsorption and reduction of NO on electrode of Pt nanoparticles in acid solutions were studied by means of cyclic voltammetry(CV) and in-situ FTIR spectroscopy.The results indicated that the reduction of NO is a complicated process including the adsorption of NO on electrode surface.Two types of surface-bonded NO were determined on Pt nanoparticles.The weakly adsorbed NO was reduced between 0.6 V and-0.05 V,which yielded nitrous oxide(N2O) and ammonium(NH4+) as products;while the strongly bonded NO was reduced at more negative potentials between-0.05V and-0.15V,producing only NH4+ species.

Go to article

Research Progress Of Synergistic Effect Of Metal Oxides On Pt-Based Catalysts, Hui-Ping Yuan, Xun Guo, Xin-Ping Qiu, Wen-Tao Zhu, Li-Quan Chen Nov 2009

Research Progress Of Synergistic Effect Of Metal Oxides On Pt-Based Catalysts, Hui-Ping Yuan, Xun Guo, Xin-Ping Qiu, Wen-Tao Zhu, Li-Quan Chen

Journal of Electrochemistry

In this paper,the work of Pt-based catalysts modified by metal oxides as the anode catalysts of direct methanol fuel cell(DMFC) is reviewed.The relationship between the structure and the composition of the catalysts and the reaction mechanism,exiting problems and developing direction are discussed.

Go to article

Electrocatalysis In Polymer Electrolyte Membrane Fuel Cells, Li Li, Si-Guo Chen, Xue-Qiang Qi, Yao-Qiong Wang, Meng-Bo Ji, Lan-Lan Li, Zi-Dong Wei Nov 2009

Electrocatalysis In Polymer Electrolyte Membrane Fuel Cells, Li Li, Si-Guo Chen, Xue-Qiang Qi, Yao-Qiong Wang, Meng-Bo Ji, Lan-Lan Li, Zi-Dong Wei

Journal of Electrochemistry

This review presents the study of Chongqing University in electrocatalysis for polymer electrolyte membrane fuel cells(PEMFCs).Based on the understanding to the performance degradation of PEMFCs' catalysts,the university has being concentrated on how to increase the activity,stability and utility of noble metal catalysts.It covers the molecular design of near-surface alloy catalysts for improvement of activity to oxygen reduction reaction(ORR) and resistance to foreign poison species,selective deposition of Pt on the so-called "three-phase interface" for a high Pt utility,and invention of anti-flooding electrode against water flooding in the catalyst layer of the membrane assemble electrode(MEA),and so on.The catalytic mechanism of electrode reactions …

Go to article

Highly Durable Pt/Ruo2/C Catalyst For The Cathode Of Direct Methanol Fuel Cells, Chun-Yu Du, Tao Dong, Ge-Ping Yin, Peng-Fei Shi Nov 2009

Highly Durable Pt/Ruo2/C Catalyst For The Cathode Of Direct Methanol Fuel Cells, Chun-Yu Du, Tao Dong, Ge-Ping Yin, Peng-Fei Shi

Journal of Electrochemistry

Instability of the carbon-supported Pt(Pt/C) catalyst at the cathode is one of the key technical challenges for the development of Direct Methanol Fuel Cells(DMFCs).In this paper,an efficient approach to enhancing the stability of the cathode catalyst was explored by designing and synthesizing a novel nanocomposite support,RuO2 coated carbon black(RuO2/C).Firstly,a wet chemical method was employed to synthesize the RuO2/C nanocomposite,from which Pt/RuO2/C catalyst was further prepared by a microwave method.The morphology and crystalline structure of the RuO2/C support and Pt/RuO2/C catalyst were then characterized by TEM and XRD.Finally,the electrochemical performance …

Go to article

Platinum Modified With Hydrogen Molybdenum/Tungsten Bronze As Electrocatalysts For Direct Small Organic Molecule Fuel Cell, Wei-Shan Li, Li-Peng Tian, Jun-Hua Du, Hong-Liang Huang, Wei Li, Li-Xia Zhang, Hong-Yan Yang, Pan-Pan Guo, Zhi-Hui Zhou, Xing-De Xiang, Zhao Fu Nov 2009

Platinum Modified With Hydrogen Molybdenum/Tungsten Bronze As Electrocatalysts For Direct Small Organic Molecule Fuel Cell, Wei-Shan Li, Li-Peng Tian, Jun-Hua Du, Hong-Liang Huang, Wei Li, Li-Xia Zhang, Hong-Yan Yang, Pan-Pan Guo, Zhi-Hui Zhou, Xing-De Xiang, Zhao Fu

Journal of Electrochemistry

There are several problems that limit the application of direct small organic fuel cell,including the use of precious platinum and the activity loss of platinum due to the intermediates poisons from the oxidation of small organic molecules.These problems have attracted wide interest and many solutions have been proposed.We have developed a new method to reduce the platinum usage and improve its activity,based on the modification of platinum with hydrogen molybdenum/tungsten bronze(HxMo(W)O3) was reviewed.

Go to article

First Prev Next Last