Chemistry Commons^™

Highly Dispersed Pt Nanoparticles Root In Single-Atom Fe Sites In Ldhs Toward Efficient Methanol Oxidation, Qing-Cheng Meng, Lin-Bo Jin, Meng-Ze Ma, Xue-Qing Gao, Ai-Bing Chen, Dao-Jin Zhou, Xiao-Ming Sun

Journal of Electrochemistry

Active and durable electrocatalysts for methanol oxidation reaction are of critical importance to the commercial viability of direct methanol fuel cell, which has already attracted growing popularities. However, current methanol oxidation electrocatalysts fall far short of expectations and suffer from excessive use of noble metal, mediocre activity, and rapid decay. Here we report the Pt anchored on NiFe-LDHs surface hybrid for stable methanol oxidation in alkaline media. Based on the high intrinsic methanol oxidation activity of Pt nanoparticles, the substrates NiFe-LDHs further enhanced anti-poisoning ability and maintained unaffected stability after 200,000 s cycle test compared to commercial Pt/C catalyst. The …

Preface To Special Issue On Electrocatalysis And Electrosynthesis, Fang-Yi Cheng, Shuang-Yin Wang, Tian-Hua Zhou

Journal of Electrochemistry

No abstract provided.

Advances And Challenges On Cathode Catalysts For Lithium-Oxygen Batteries, Bo Wen, Zhuo Zhu, Fu-Jun Li

Journal of Electrochemistry

Aprotic lithium-oxygen batteries (LOBs) with high theoretical energy density have received considerable attention over the past years. However, the oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) at cathodes suffer from slow kinetics for large overvoltages in LOBs. Significant advances on catalysts have been achieved to accelerate cathode kinetics, but understanding on the formation/decomposition processes of Li₂O₂ is limited. Herein, this review highlights the fundamental understanding of the correlation between catalysts and formation/decomposition of Li₂O₂. Various types of cathode catalysts are discussed to reveal the mechanism of formation/decomposition of Li₂O₂, …

Coreflooding Evaluation Of Fiber-Assisted Recrosslinkable Preformed Particle Gel Using An Open Fracture Model, Shuda Zhao, Ali Al Brahim, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Recrosslinkable Preformed Particle Gels (RPPGs) Have Been Used to Treat the Problem of Void Space Conduits (VSC) and repair the "Short-Circuited" Waterflood in Alaska's West Sak Field. Field Results Showed a 23% Increase in Success Rates over Typical Preformed Particle Gel (PPG) Treatments. in This Paper, We Evaluated Whether Adding Fiber into RPPGs Can Increase the RPPG Plugging Efficiency and Thus Further Improve the Success Rate. We Designed Open Fracture Models to Represent vs.C and Investigated the Effect of Swelling Ratio (SR), Fracture Size, and Fiber Concentration on Gel Injection Pressure, Water Breakthrough Pressure, and Permeability Reduction. Results Show that …

Design And Applications Of Fmoc-Histidine And Aspartic Acid Tripeptides As Proton Conductive Materials, Shejla S. Pollozi

Dissertations, Theses, and Capstone Projects

The increasing demand for clean and sustainable energy has driven forward rapid improvements in polymer-electrolyte fuel cells and the use of ion-conducting polymers (ionomers) as proton exchange membranes and catalyst binders. While perfluorinated electrolytes have been commercially used as conductive membranes for nearly four decades, a new class of sustainable, conductive materials has emerged, inspired by the efficiency of charge transport processes in biological systems. These molecules, knows as peptide amphiphiles (PAs), have gained popularity as building blocks for the bottom-up fabrication of nanomaterials through supramolecular self-assembly. Supramolecular nanostructures, often in the form of hydrogels, are held together via non-covalent …

Recent Advances In Exploring Highly Active & Durable Pgm-Free Oxygen Reduction Catalysts, Yuan Li, Miao-Ying Chen, Bang-An Lu, Jia-Nan Zhang

Journal of Electrochemistry

In order to reduce the considerable usage of expensive but scarce platinum at the cathode in proton exchange membrane fuel cells (PEMFCs), it is necessary to pursue alternatives to platinum. The most promising platinum group metal (PGM)-free catalysts for oxygen reduction reaction (ORR) are atomically dispersed, and nitrogen-coordinated metal site catalysts denoted as M-N-C (M = Fe, Co, or Mn, etc.). Over the last few decades, there have been great advances in these catalysts with high ORR activity and promising initial fuel cell performance approaching traditional Pt/C catalysts. However, the stability of these highly active Fe-N-C catalysts under practical fuel …

Electrochemical Oxidation Of Ethylene On Palladium Electrode, Wei-Xing Wu, Ying Wang

Journal of Electrochemistry

The electrochemical oxidation of C₂H₄ is attracting increasing attention due to its vast potential market. The current electrochemical methods rely on the use of redox mediators, which may produce corrosive intermediates, while direct oxidation is still limited by its low activity and selectivity. Herein, we conducted electrochemical studies to obtain mechanistic insights into the benchmark Pd catalyst. The generated Pd(II) could be the active site for C₂H₄ oxidation. By designing the pulse sequence, we found the ratio of strongly and weakly adsorbed C₂H₄ on Pd to be 0.3:1. The result we …

Preface To Special Issue: Electrocatalysis And Electrosynthesis, Fang-Yi Cheng, Shuang-Yin Wang, Tian-Hua Zhou

Journal of Electrochemistry

No abstract provided.

Supperlattice-Like Structure: Ordered Mass Transfer Endowing High Quality Output Of Fuel Cell, Jian Wang, Wen-Hui Xuan, Qian He, Jing-Xia Jiang, Yuan-Yuan Zhou, Yao Nie, Qiang Liao, Min-Hua Shao, Wei Ding, Zi-Dong Wei

Journal of Electrochemistry

The current or voltage fluctuation in fuel cell operation is harmful to the fuel cell system and power application equipment. Here, we report a technique to eliminate such a fluctuation by the aid of new type of catalysts, superlattice-like mesoporous PtCo catalysts. The current fluctuation in fuel cells catalyzed by two invented catalysts are fixed at as low as 25 mA·cm⁻² with a power of 0.75 W·cm⁻² or 120 mA·cm⁻² with a power of 1.01 W·cm⁻², and no noticeable current decay was detected over 100 h. By contrast, a …

Lysine Crosslinked Polyacrylamide─A Novel Green Polymer Gel For Preferential Flow Control, Tao Song, Baojun Bai, Yugandhara Eriyagama, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Acrylamide-based polymer gels have been applied to control the preferential flow in the subsurface for decades. However, some commonly used crosslinkers, such as Cr (III) and phenol-formaldehyde, are highly toxic and are being phased out because of stringent environmental regulations. This work uses l-lysine as the green crosslinker to produce acrylamide-based polymer gels. This article systematically studied the effect of lysine and polymer concentration, salinity, pH, and temperature on gelation behavior and thermal stability. Besides, the gelation mechanism and crosslinking density were elucidated in this work. A high-permeability sandstone core was used to test the plugging efficiency of this novel …

Development Of Battery Materials To Function As Corrosion Protection On Car Body Plates, Tubagus Noor Rohmannudin, Sulistijono Sulistijono, Noval Adrinanda, Faridz Wira Dharma, Samuel Areliano

Journal of Materials Exploration and Findings

Most car bodies made for mass production are made from steel or aluminum. Both are strong metals, but steel is cheaper than aluminum and is more commonly used in lower-end cars for a broader consumer range. The weakness of steel compared to aluminum is that it is susceptible to corrosion under certain conditions, and thus it may deteriorate over time without proper care. To prevent corrosion, modern cars are coated with paint to prevent direct contact with the environment. As a second line of protection, a car battery can be connected to the body to create an impressed current cathodic …

Potential Of Biduri Fiber (Calotropis Gigantea) As Material For Oil Spill Absorbent, Anne Sukmawati, Wulan Septiani

Journal of Materials Exploration and Findings

Biduri fiber (Calotropis gigantea) is a natural hollow fiber with hydrophobic and oleophilic properties potentially used as oil spilled sorbent from seawater. This study aims to determine the absorption capacity and efficiency of the Biduri fiber and membrane to fuel oil. Measurement of oil absorption to seawater was carried out at various fiber weights (0.5-1.5 g), fiber composition (50-95%), contact time (10-90 minutes), temperature (30 and 50°C), and compared with commercial products. The results showed that the fiber weight variation of 0.5-1.5 g has an average absorption efficiency of 96.67%, and the highest absorption was obtained in a weight of …

Influence Of Synthesis Conditions On The Physicochemical And Electrocatalytic Properties Of Non-Stoichiometric Ba2sr2la2ti4o12 Perovskites, Ofeliya Kostadinova, Iliyan Popov, Simeon M. Stankov, Hristo Kolev, Tamara Petkov

Karbala International Journal of Modern Science

Present work studies the influence of the pretreatment milling media (deionized water (BLTOS-H) and isopropanol (BLTOS-i)) on the surface characteristics, structure, chemical composition and catalytic activity of non-stoichiometric Ba2Sr2La2Ti4O12 perovskites. The IR spectroscopy and XRD analyses shows a difference in the structure and phase composition of the two materials. X-ray photoelectron spectroscopy detects a Ba2+- and La3+-enriched and Sr2+-depleted surface. The BLTOS-i sample appears to exhibit higher specific surface area (SSA) and pore volume in comparison to BLTOS-H. The electrochemical tests showed that BLTOS-H sample have similar behavior to platinum at current densi-ties up to 10 mA cm-2, while BLTOS-i …

Comparative Static And Dynamic Analyses Of Solvents For Removal Of Asphaltene And Wax Deposits Above- And Below-Surface At An Iranian Carbonate Oil Field, Milad Norouzpour, Amin Azdarpour, Rafael M. Santos, Ali Esfandiarian, Moein Nabipour, Erfan Mohammadian, Abbas K. Manshad, Alireza Keshavarz

Research outputs 2022 to 2026

During production from oil wells, the deposition of asphaltene and wax at surface facilities and porous media is one of the major operational challenges. The crude oil production rate is significantly reduced due to asphaltene deposition inside the reservoir. In addition, the deposition of these solids inside the surface facilities is costly to oil companies. In this study, the efficiency of different solvents in dissolving asphaltene and wax was investigated through static and dynamic tests. The analysis of solid deposits from the surface choke of one of the Iranian carbonate oil fields showed that they consisted of 41.3 wt % …

Methyl Isobutyrate Production Via Hydrogenation Of Methyl Methacrylate Derived From Pyrolysis Of Acrylic Plastic Waste, Ramzi Nasser Ahmed Saif

Chulalongkorn University Theses and Dissertations (Chula ETD)

According to zero waste and upcycling policy, this work aims to utilize waste polymethyl methacrylate (PMMA) to methyl isobutyrate (MIB) via hydrogenation over nickel (Ni) based catalysts supported on commercial zeolites: HY, H-Beta-27 (SiO2/Al2O3 = 27 by mole), H-Beta-40 (SiO2/Al2O3 = 40 by mole) and H-ZSM-5. The appropriate catalyst support was first screen by using MMA monomer as the substrate for hydrogenation. Under 30 bar initial H2 pressure (PH2) at 250 °C for 3 h, Ni/H-Beta-27 catalyst effectively promoted hydrogenation to achieve 85% MMA conversion with 56.2 wt% MIB yield because of its larger external surface area and pore size. …

Comprehensive Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For The Water Management Of Reservoir With Concentrated Divalent Ions, Tao Song, Mohamed Ahdaya, Zhanmiao Zhai, Thomas P. Schuman, Baojun Bai

Chemistry Faculty Research & Creative Works

As one of the most widely used technology to ameliorate the reservoir's heterogeneity, polymer gels have been applied for more than 60 years. However, how to plug fractured reservoirs with significant abnormal features, high temperature and high salinity, especially the divalent cations, is still a challenging target. This work systematically evaluated a novel salt-resistant re-crosslinkable preformed particle gel (SR-RPPG) designed for fractured reservoirs with excellent salt resistance (up to 5 % CaCl₂). We evaluated the swelling kinetics, thermal stability and plugging efficiency of this SR-RPPG. We assessed the swelling kinetic and re-crosslinking behavior of the SR-RPPG through the …

Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gels (PPG) have been widely applied in oilfields to control excessive water production. However, PPG has limited success in treating opening features because the particles can be flushed readily during post-water flooding. We have developed a novel micro-sized Re-crosslinkable PPG (micro-RPPG) to solve the problem. The microgel can re-crosslink to form a bulk gel, avoiding being washed out easily. This paper evaluates the novel microgels' transport and plugging performance through super-permeable channels. Micro-RPPG was synthesized and evaluated for this study. Its storage moduli after fully swelling are approximately 82 Pa. The microgel characterization, self-healing process, transportation behavior, and …

Computational Investigation Of A Series Of Small Molecules As Potential Compounds For Lysyl Hydroxylase-2 (Lh2) Inhibition, Yazdan Maghsoud, Erik Antonio Vázquez-Montelongo, Xudong Yang, Chengwen Liu, Zhifeng Jing, Juhoon Lee, Matthew Harger, Ally K. Smith, Miguel Espinoza, Hou-Fu Guo, Jonathan M. Kurie, Kevin N. Dalby, Pengyu Ren, G. Andrés Cisneros

Markey Cancer Center Faculty Publications

The catalytic function of lysyl hydroxylase-2 (LH2), a member of the Fe(II)/αKG-dependent oxygenase superfamily, is to catalyze the hydroxylation of lysine to hydroxylysine in collagen, resulting in stable hydroxylysine aldehyde-derived collagen cross- links (HLCCs). Reports show that high amounts of LH2 lead to the accumulation of HLCCs, causing fibrosis and specific types of cancer metastasis. Some members of the Fe(II)/αKG-dependent family have also been reported to have intramolecular O2 tunnels, which aid in transporting one of the required cosubstrates into the active site. While LH2 can be a promising target to combat these diseases, efficacious inhibitors are still lacking. We …

Molecular Elucidation Of Reaction Mechanisms In Aluminum & Lithium Metal Batteries By Solid-State Nmr Spectroscopy And Electrochemical Methods, Leo W. Gordon

Dissertations and Theses

As society wrestles with the ever-growing climate consequences of burning fossil fuels, the increased demand for electric vehicles and renewable power generation mandates safe, sustainable, earth-abundant, low cost, and energy dense batteries. Different use cases will necessitate different types of batteries; for example, stationary storage systems prioritize minimal expense, whereas mobile applications like electric vehicles emphasize high energy densities. Aluminum and lithium metal batteries hold great promise for next-generation energy storage due to their large specific capacities (2980 mA h g^-1, and 3860 mA h g^-1, respectively). In particular, aluminum metal is low cost, has high …

Ambient Ammonia Synthesis Via Microwave-Catalytic Materials And Plasma Chemistry, Siobhan Brown

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ammonia is critical to supporting human life on earth because of its use as fertilizer. The Haber-Bosch process to produce ammonia has been practiced for over 100 years. This process operates at high pressure and temperature to overcome the thermodynamic and kinetic limitations of the ammonia synthesis reaction thus researchers have tried to overcome it for decades. At present this process represents 1% of global energy usage and 2.5% of global CO₂ emissions. The proposed chemical looping ammonia synthesis approach seeks to reduce the environmental impact of this critical process and to elucidate microwave-catalytic principles.

This research aims to …

Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels, Daniel Darby

Theses and Dissertations--Chemical and Materials Engineering

The exceptional mechanical and adhesive properties of mussel byssal threads come from supramolecular interactions of ligands found in the proteins comprising them. Ligands can form hydrophobic interactions, π-π stacking interactions, and hydrogen bonds, but the strongest supramolecular interaction they demonstrate is metal-ligand coordination. Specifically, Histidine (His-) and nitrodopamine (nDOPA) ligands coordinate to metals in a bidentate fashion and take on tris-, bis-, and mono- modalities (3, 2, or 1 ligand per ion, respectively). The distribution of these modalities is controlled by equilibrium thermodynamics. These same ligands can be used as crosslinks in supramolecular hydrogel networks. Supramolecular hydrogel networks are dissipative, …

Molecular Understanding Of Zwitterions And Quantum Computing For Sustainability, Manh Tien Nguyen

Theses and Dissertations--Chemical and Materials Engineering

The sustainable development of society needs sustainable energy solutions and the mitigation of greenhouse gas emissions. One key subject in this area is the development of safe and efficient ion-based batteries. Moreover, CO₂ capture is a crucial pathway in mitigating emissions from the combustion of fossil fuels. Ongoing efforts are to improve both technologies' safety and efficiency. This thesis presents our efforts to conduct computational research on understanding advanced zwitterionic electrolytes and CO₂ capture. Chapters 2-4 illustrate the computational research to understand ionic solvation in zwitterionic electrolytes. Solid-state electrolytes are essential for safer batteries. While solid polymer electrolytes …

Chemical Decomposition Of Flexible Polyurethane Foam To Generate A Media For Microbial Upcycling, Kaushik Baruah

Dissertations, Master's Theses and Master's Reports

Polyurethane waste is becoming a global concern as a large amount is being disposed of in landfills every year, and only a fraction is being recycled. Several polyurethane recycling techniques exist, of which ammonolysis and base-catalyzed hydrolysis is the least explored. Flexible polyurethane foam (FPUF) decomposition can generate amines that can act as a carbon source for the growth of microbial consortia. This study aims to generate a novel media capable of microbial upcycling via ammonolysis and base-catalyzed hydrolysis of flexible polyurethane foams (FPUFs) using ammonium hydroxide and subsequently determine the reaction conditions for maximum solubilization of polyurethane foam in …

Outstanding Advantages, Current Drawbacks, And Significant Recent Developments In Mechanochemistry: A Perspective View, Silvina Pagola

Chemistry & Biochemistry Faculty Publications

Although known since antiquity, mechanochemistry has remained dormant for centuries. Nowadays, mechanochemistry is a flourishing research field at the simultaneous stages of gathering data and (often astonishing) observations, and scientific argumentation toward their analysis, for which the combination of interdisciplinary expertise is necessary. Mechanochemistry’s implementation as a synthetic method is constantly increasing, although it remains far from being fully exploited, or understood on the basis of fundamental principles. This review starts by describing many remarkable advantages of mechanochemical reactions, simplifying and “greening” chemistry in solutions. This description is followed by an overview of the current main weaknesses to be addressed …

More On The Demons Of Thermodynamics, Daniel P. Sheehan, Garret Moddel, James W. Lee

Chemistry & Biochemistry Faculty Publications

No abstract provided.

Investigation Of Additives And Ingredients Of Bio-Resin For Visible Wavelength Laser-Induced Polymerization, Patrick Riggs

College of Graduate Studies: Theses & Dissertations

Optical 3D printing is a branch of Additive manufacturing (AM) that utilizes low-waste production leading to efficient and rapid prototyping. Currently, this method of AM is associated with mainly petroleum-based resins. Bio-resin polymerization is an emerging research area for finding replacements for petroleum-based resins, but curing the resin with laser energy is not normally a practical use case. Current optical 3D printing uses lasers to cure liquid resins to form solid 3D objects in a layer-by-layer process which is time consuming, defect prone, and a leading limiting factor for high volume production; so, finding a way to incorporate bio-resin into …

Phosphorus Release And Recovery From Simulated Ferric Wastewater Sludge, Aseel Alnimer

Theses and Dissertations (Comprehensive)

Phosphorus (P) is a fundamental element necessary for all life forms and a key component in the fertilizer industry. Meanwhile, the excessive load of P to water bodies due to human activities has the potential to promote eutrophication. Wastewater treatment plants remove P either biologically or chemically and produce P rich sludge which could be a potential renewable source for P. At present, commercial technologies exist for P recovery from biological wastewater sludge. However, P recovery from chemical sludge particularly iron(III)-phosphate (Fe-P) sludge generated in chemical P removal plants that use iron(III) salts remains a challenge.

This study explored, in …

Elucidation Of Active Site And Mechanism Of Metal Catalysts Supported In Nu-1000, Hafeera Shabbir

All Dissertations

Advances in extraction of shale oil and gas has increased the production of geographically stranded natural gas (primarily consisting of methane (C1) and ethane (C2)) that is burned on site. A potential utilization strategy for shale gas is to convert it into fuel range hydrocarbons by catalytic dehydrogenation followed by oligomerization by direct efficient catalysts. This work focuses on understanding metal cation catalysts supported on metal-organic framework (MOF) NU-1000 that will actively and selectively do this transformation under mild reaction conditions, while remaining stable to deactivation (via metal agglomeration or sintering). I built computational models validated by experimental methods to …

Water-Soluble Saponins Accumulate In Drought-Stressed Switchgrass And May Inhibit Yeast Growth During Bioethanol Production, Sarvada Hemant Chipkar, Katherine Smith, Elizabeth M. Whelan, Derek J. Debrauske, Annie Jen, Katherine A. Overmyer, Andrea Senyk, Larkin Hooker-Moericke, Marissa Gallmeyer, Joshua J. Coon, A. Daniel Jones, Trey K. Sato, Rebecca G. Ong

Michigan Tech Publications, Part 1

Background: Developing economically viable pathways to produce renewable energy has become an important research theme in recent years. Lignocellulosic biomass is a promising feedstock that can be converted into second-generation biofuels and bioproducts. Global warming has adversely affected climate change causing many environmental changes that have impacted earth surface temperature and rainfall patterns. Recent research has shown that environmental growth conditions altered the composition of drought-stressed switchgrass and directly influenced the extent of biomass conversion to fuels by completely inhibiting yeast growth during fermentation. Our goal in this project was to find a way to overcome the microbial inhibition and …

Surface-Driven Instabilities At Oil-Water Interfaces, Anelisse Claros Mendieta

Graduate Theses and Dissertations

Fluid-fluid interactions are such a wide area and can be observed in different scenarios such as geothermal systems, waterflooding of reservoirs, oil recovery, and water treatment processes. This thesis aims to deepen the understanding of fluid-fluid interactions which include Marangoni flows, charge related instabilities, and surface activity. This thesis studied the interactions of micrometer-sized droplets of an oil (toluene) with surfactant Di-(2-ethylhexyl) phosphoric acid (DEHPA) in the aqueous phase. One of the main goals is to understand several surface-driven instabilities and how those can be manipulated for future applications.Furthermore, this thesis aims to use these oil-surfactant droplets as a medium …