Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 1201 - 1230 of 1376

Full-Text Articles in Chemistry

Preparation And Characterization Of Lithiated Cathode Materials For Lithium Batteries, Shanti Navaratnam Jan 2001

Preparation And Characterization Of Lithiated Cathode Materials For Lithium Batteries, Shanti Navaratnam

Student Works (2000-2009)

Four different cathode materials, LiNiO₂, LiCoO₂, LiCo₀.₂ Ni₀.₈O₂ and LiCo₀.₄, Ni₀.₆O₂ were synthesized by sol - gel technique. The prepared materials were characterized X-ray diffraction pattern, FT-IR and cyclic voltammetry. X-ray diffraction pattern shows crystallinity of materials, increases with higher calcination temperature. From FT- IR studies, it was shown, that the purity of sample also increased with prolong heating at higher temperatures. It was possible to obtain pure and highly crystalline LiNiO₂ after heating for fourteen hours at 800°c. Cyclic voltammetry shows the four prepared materials are suitable for fabrication of cathode, as lithium ions can intercalate and de-intercalate. LiNiO₂ …

Go to article

Auditing And Biological Treatment Of Oleochemical Industry Waste, Fauziah Shahul Hamid Jan 2001

Auditing And Biological Treatment Of Oleochemical Industry Waste, Fauziah Shahul Hamid

Student Works (2000-2009)

The utilization of renewable resources particularly from plant-based industries, such as, in the oleochemical sector makes it possible for further expansion of down-stream process products. However, to remain competitive the pollution generated from this industry should not be taken lightly. Implementation of cleaner technology into the oleochemical process will increase the efficiency of resource utilization of the industry, concurrently reducing quantity of waste generated. Waste audit conducted at Cognis Oleochemical (M) (COM) Sdn. Bhd. indicated that the major process-wastes generated by the facility were glycerol residue (GR) from Cognis Rika (M) Sdn. Bhd. (CRM) and wastewater sludge (WWS) from COM …

Go to article

Municipal Waste Characteristics And Management In Pantai Dalam, Kuala Lumpur, Ratanam Andythaven Jan 2001

Municipal Waste Characteristics And Management In Pantai Dalam, Kuala Lumpur, Ratanam Andythaven

Student Works (2000-2009)

The primary purpose of this research was to study comprehensively the municipal waste generation (rate, quantity), waste characterization including (physical, chemical and biological parameters), heavy metal content, waste recovery and recycling, and socio economic aspects of municipal solid waste (MSW) generation and management in Taman Bukit Angkasa, Pantai Dalam, Kuala Lumpur and the surrounding areas. The waste characterization and management was determined with actual field observations coupled with questionnaire survey from a random sample of 250 households (200 flats houses, 25 long houses and 25 squatter residences). The quantification and other parameters (heavy metals, water extractable nutrients, nitrogen, pH, acidity, …

Go to article

Template Synthesis Of Nano-Structured Electrode Materials And Its Electrochemical Performance, Jian Zhao, Quan-Yong Gao, Yong Yang, Zu-Geng Lin Nov 2000

Template Synthesis Of Nano-Structured Electrode Materials And Its Electrochemical Performance, Jian Zhao, Quan-Yong Gao, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

In this letter, various nano structured materials such as spinel LiMn2O4 nanotubes/nanowires and carbon nanotubes have been prepared by using porous alumina template. The prepared template and materials have been characterized by AFM and TEM techniques. It is shown that size of the nanotubes can be conveniently controlled by using template method. Some preliminary results of cyclic voltammetry about nano structured LiMn2O4 are also reported.

Go to article

The Development Of Carbon Monoxide Tolerant Catalysts For Proton-Exchange Membrane Fuel Cell, Zhong-Jun Hou, Hong-Mei Yu, Bao-Lian Yi, Ming Han Nov 2000

The Development Of Carbon Monoxide Tolerant Catalysts For Proton-Exchange Membrane Fuel Cell, Zhong-Jun Hou, Hong-Mei Yu, Bao-Lian Yi, Ming Han

Journal of Electrochemistry

High over-potential of proton exchange membrane fuel cell (PEMFC) anode caused by carbon monnoxide poisoning when reformate or methanol is used as fuel is main obstacle to the high performance of PEMFCs. Using carbon monoxide tolerant catalysts is the most hopeful way to solve the CO problem. The CO poisoning problem is reviewed briefly in this paper, and the development of CO tolerant catalysts is introduced in details, including electrocatalysts activity, preparation method and mechanism of tolerance to CO.Mo and W can improve catalysts' CO tolerance. Multi-component catalysts are expected to be more tolerant to CO.

Go to article

Investigation Of A Complex Lithium Cobalt Nickel Oxide As Lithium Ion Battery Cathode Materials Prepared By A New Citrate Sol-Gel Method, Jing-Li Han, Qing-Guo Liu Nov 2000

Investigation Of A Complex Lithium Cobalt Nickel Oxide As Lithium Ion Battery Cathode Materials Prepared By A New Citrate Sol-Gel Method, Jing-Li Han, Qing-Guo Liu

Journal of Electrochemistry

The synthesis and electrochemical characteristics of lithium cobalt nickel oxide as cathode materials for rechargeable lithium batteries were investigated. It was clarified from these investigations that lithium cobalt nickel oxide has been produced from basic cobalt carbonate,basic nickel carbonate, lithium carbonate, and citrate. LiNi0.8Co 0.2O2 prepared under the stream of oxygen gas showed a higher cycling capacity of (～190 mAh·g-1).

Go to article

Studies Of Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode——I. Cyclic Voltammograms And In-Situ Ftir Spectroscopy In Alkaline Media, Guo-Lian Chen, Shi-Gang Sun, Sheng-Pei Chen, Zhi-You Zhou Nov 2000

Studies Of Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode——I. Cyclic Voltammograms And In-Situ Ftir Spectroscopy In Alkaline Media, Guo-Lian Chen, Shi-Gang Sun, Sheng-Pei Chen, Zhi-You Zhou

Journal of Electrochemistry

The electro-oxidation of ethanol on nm-Pt/GC electrode in alkaline solutions containing 0.02 mol·L-1 NaOH+0.1 mol·L-1 CH3CH2OH was investigated by using cyclic voltammetry and in-situ FTIR spectroscopy. The experimental results demonstrated that the main product of ethanol oxidation is CH3COO-, only very small amount of CH 3CHO has been determined simultaneously. In contrast with the dual path reaction mechanism for the oxidation of ethanol in acid media, the oxidation of ethanol in alkaline media didn't pass through the dissociative adsorption, and no adsorbed species could be determined even using a …

Go to article

Fourier Transform Raman Spectroscopy For Process Control In The Petroleum Industry, Kent Lawson Wise Oct 2000

Fourier Transform Raman Spectroscopy For Process Control In The Petroleum Industry, Kent Lawson Wise

Chemistry & Biochemistry Theses & Dissertations

As early as 1950, Raman spectroscopy was proposed as a method to determine aromatics and olefins in hydrocarbon mixtures. Until recently, extensive use of Raman spectroscopy in the characterization of hydrocarbons has not been practical due to several limitations. One early limitation to Raman analysis was the absence of a high intensity and stable excitation source. This problem has been overcome with the advent of lasers. Another limitation was the presence of fluorescence in hydrocarbon fuels when excited by visible lasers. However, the development of Fourier-transform Raman spectrometers now allows Raman spectra to be collected using near-IR lasers (e.g …

Go to article

Review Of: Joe Thornton, Pandora's Poison: Chlorine, Health, And A New Environmental Strategy, William Ronnenberg Jr. Sep 2000

Review Of: Joe Thornton, Pandora's Poison: Chlorine, Health, And A New Environmental Strategy, William Ronnenberg Jr.

RISK: Health, Safety & Environment (1990-2002)

Review of the book Pandora's Poison: Chlorine, Health, and a New Environmental Strategy by Joe Thornton, (M.I.T. Press 2000). Appendices, notes, references, index. LC 99-057011; ISBN 0-262-20124-0 [599 pp. $34.95 cloth, Five Cambridge Center, Cambridge MA 02142-1493] .

Go to article

Cathodic Indirect Oxidation Of Organic Compounds(Ⅱ)——Cathodic Indirect Epoxidation Of Olefine, Xue-Ying Zhang, Bao-Qiu Cui, Deng-Ping Gu, Wei Li Aug 2000

Cathodic Indirect Oxidation Of Organic Compounds(Ⅱ)——Cathodic Indirect Epoxidation Of Olefine, Xue-Ying Zhang, Bao-Qiu Cui, Deng-Ping Gu, Wei Li

Journal of Electrochemistry

We described a novel cathodic indirect epoxidation system in which O2 was first cathodically reduced to H2O2. Then VO(acac)2 was oxidized by H2O2 homogeneously to VO(acac)2OOH which was used to epoxidize some olefine such as maleic, fumaric and crotonic acids. Many affecting factors on the current efficiency were optimized. The research will contribute to the developments of organic electrosynthesis.

Go to article

The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu Aug 2000

The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu

Journal of Electrochemistry

The coherent electroplates were prepared by electro depositing Pd on supporting materials glassy carbon. The surface morphology of the electrodes was examined by SEM. The electro oxidation of HCOOH in HClO4 solution was investigated by using cyclic voltammetry. The results show that the deposited conditions in the preparation of electrodes by electro depositing Pd affect the electrodes electro catalytic activity to the oxidation of HCOOH. The platinized Pd electrode on GC substrates using large current density is of higher catalytic activity to the oxidation of HCOOH than Pd electrode. The electro catalytic activity of PdO formed on the Pd …

Go to article

The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang Aug 2000

The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang

Journal of Electrochemistry

Lithiated titanium composite oxides Li4Ti5O12 were prepared from Li2CO3 and TiO2. The XRD results of this composite oxides indicated that the compound had a spinel structure. The electrochemical behavior of lithiated titanium composite oxides was examined. The results showed that this material had an excellent cyclic capability and reversibility for lithium insertion, and had high specific capacity: the initial discharge capacity was 300 mAh·g-1 , and the reversible capacity was 100 mAh·g-1 . The discharge plateau (about 1.5 V) and the charge plateau (about 1.6 V) were very …

Go to article

Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu Aug 2000

Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu

Journal of Electrochemistry

The cathode materials Li1+xMn2O4 were prepared with citric acid complexing and solution impregnating methods. Structure characterization and specific surface area test were performed by means of XRD, BET methods, the influences of calcination temperature, Li/Mn molar ratio and raw materials on the structure and electrochemical capacity of samples have beem examined. The results showed that the Li/Mn molar ratio and calcimation temperature were the key factors affecting the electrochemical capacity of cathode materias. The optimum conditions for synthesis of  Li1+xMn2O4 cathode material were 0≤x≤0.05 and calcined at 750°C. The initial …

Go to article

The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan Aug 2000

The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan

Journal of Electrochemistry

Solid oxide fuel cells with supported yttria stabilized zirconia electrolyte films on anode substrates of various thickness have been fabricated. The electrochemical performances of the SOFCs have been examined. The results showed that the cell performance was limited by the anodic overpotential, which is caused mainly by a concentration polarization when the anode substrate is thick. The anodic overpotential was reduced obviously as the thickness of anode substrate was decreased. As a result, the performance of the SOFC cell was improved. With a 0.5 mm anode substrate, a SOFC cell produced a power density about 0.19 W/cm2 at 800 …

Go to article

A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu Aug 2000

A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu

Journal of Electrochemistry

Research and development on low platinum loading electrode is very important in reducing the cost of proton exchange membrane fuel cell(PEMFC) stack. This paper has put forward a new method to prepare the electrode of PEMFC. The pore forming substances were used in this methd. The low platinum loading electrodes (0.02 mgPt⋅cm-2) have already been prepared with the method. Compared with the traditional method, the new method is simple, cheep, and easy to scale up. The superior composition of the electrodes is catalyst: pore forming substance: Nafion= 3:3:1. The performance of a single cell using this …

Go to article

High Efficiency Separation Of Microbial Aggregates Using Capillary Electrophoresis, J. M. Schneiderheinze, Daniel W. Armstrong, G. Schulte, David J. Westenberg Aug 2000

High Efficiency Separation Of Microbial Aggregates Using Capillary Electrophoresis, J. M. Schneiderheinze, Daniel W. Armstrong, G. Schulte, David J. Westenberg

Chemistry Faculty Research & Creative Works

Recent advances in the technique of capillary electrophoresis have demonstrated fast, highly efficient separation of mixtures of intact microbes. This paper describes the application of this technique for the separation of microbial aggregates of Micrococcus luteus, Saccharomyces cerevisiae, or Alcaligenes faecalis. The aggregates of these microbes were resolved into several highly efficient peaks with analysis times under 10 min and efficiencies approaching 1 000 000 plates m-1 in some cases. A reproducible relationship was found between the electrophoretic mobility and the aggregation number or size of the cluster under a given set of experimental conditions. Often, cellular aggregation was reversible …

Go to article

Powder Microelectrode Modified With Nafion-Os(Bpy)3Â 2+ And Pvp Composite And Its Catalysis For No2- Reduction, Pei-Fang Liu, Jia-Wei Yan May 2000

Powder Microelectrode Modified With Nafion-Os(Bpy)3Â 2+ And Pvp Composite And Its Catalysis For No2- Reduction, Pei-Fang Liu, Jia-Wei Yan

Journal of Electrochemistry

The modified powder microelectrode was prepared by etching a Pt (0.1 mm diameter) disk microelectrode and filling in thus formed cavity with Nation-Os(bpy)32+/PVP composite modified carbon powder. The composite modified powder microelectrode showed cyclic voltammetric behaviors changing with the mole ratio (denoted X) of SO3- to Os(bpy)32+ in Nafion. When X=3, a single pair of current peaks appeared near 0.6V (vs. SCE) due to Os(bpy)32+/3+ redox couple. In contrast, for X=20, a pair of additional current peaks occurred near 0.4V. Both X=3 and X=20 modified powder microelectrodes strongly catalyzed the first …

Go to article

Template Synthesis And Uv-Vis Absorption Spectra Of The Nanowire Arrays Of Cadmium Chalcogenides, Shi-Min Xu, Kuan-Hong Xue, Jing-Lin Kong, Dong-Mei Sun, Yu-Ying Feng, Hai-Yan Lu, Guang-Hou Wang May 2000

Template Synthesis And Uv-Vis Absorption Spectra Of The Nanowire Arrays Of Cadmium Chalcogenides, Shi-Min Xu, Kuan-Hong Xue, Jing-Lin Kong, Dong-Mei Sun, Yu-Ying Feng, Hai-Yan Lu, Guang-Hou Wang

Journal of Electrochemistry

The porous alumina membrane formed in the anodic oxidation of highly pure aluminum foil has attracted a great deal of attention in recent years. It can be served as a desired template to prepare nanometer scale materials due to its unique structure of discrete and cylindrical nanopores, paralleled one another, with the homogeneous size and distribution. Chalcogenide semiconductors have promising prospect in the applications of photovoltaic and photoconducting devices and have been extensively exploited for many years. Olbright and his co-workers studied experimentally and theoretically the optical nonlinearties of CdSxSe1-x-doped glass; Britt and Ferekides reported that …

Go to article

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen Feb 2000

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Ir-Ta-Ti metal oxide coated titanium anodes of variable composition were prepared by thermal decomposition. Their micro morphorogies and electrochemical properties were characterized by scanning electron microscope, open circuit potential, cyclic voltammetry, consumption rate measurements and accelerated life test. The SEM results indicated that all coatings were of a porous and cracked-mud microstructure influenced greatly by the composition of coatings. The electrochemical measurements showed that the Ir-Ta-Ti ternary oxide-coated anodes exhibited excellent electrochemical activity and electrochemical stability in both acidic media and seawater which were affected by the composition and microstructure of the coatings. Owing to good corrosion resistance and low …

Go to article

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu Feb 2000

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu

Journal of Electrochemistry

The oxidation peak potentials (Ep) of alinine derivates and catechol in 0.1 mol/L KCl+15% alcohol solution were measured by cyclic voltammograms technique. The electrochemical oxidation condition was set according to the Ep. Three derivates of 4,5-disubstituted -1,2-benzoquinones were prepared via electrochemical oxidation-Michael addition reaction. The possible mechanism of electrochemical oxidation-Michael addition reaction is presented.

Go to article

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui Feb 2000

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui

Journal of Electrochemistry

A cathodic indirect electro-oxidation system was established for indirect electro-oxidize dimethyl sulfoxide to dimethyl sulfone with electro-eduction generated H2O2 catalyzed by the pertungstate/tungstate (WO52-/WO42-) redox mediator. Influences of current density, pH, temperature, and the current efficiencies etc. On the cathodic indirect electro-oxidation of dimethyl sulfone were investigated for determining optimum reaction conditions. The current efficiency reached more than 70%. Mother-liquid could be recycled to use without pollution.

Go to article

Effect Of Different Species Of Cobalt Additive On Performance Of Nickel Hydroxide Electrode, Xian-Xia Yuan, Yin-Dong Wang, Feng Zhan Feb 2000

Effect Of Different Species Of Cobalt Additive On Performance Of Nickel Hydroxide Electrode, Xian-Xia Yuan, Yin-Dong Wang, Feng Zhan

Journal of Electrochemistry

Performances of nickel electrodes when adding or without adding Cobalt in different forms were studied, the results were interpreted by cyclic voltammetry(CV) and electrochemical impedance spectroscope (EIS). It was demonstrated that the additions of Co, CoO, CoO+Co by mechanically mixing with Ni(OH)2 all can improve the performance of nickel electrode to some extent, and when Co is added in the form of CoO the best performance can be obtained. This can be mainly attributed to the fact that three kinds of Co additives all improved the structure of nickel hydroxide and the ability of H+ in electrolyte transporting …

Go to article

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai Feb 2000

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai

Journal of Electrochemistry

An investigation has been made to obtain the glyoxalic acid by the electrochemical oxidation of glyoxal solution with hydrochloric acid under various experimental conditions.The cell used consists of a lead cathode, a DSA anode and a cation-exchange membrane of model CM001. The current efficiency and yield for glyoxalic acid generation were 80.0% and 91.1% respectively, under optimal operating conditions: velocity of electrolyte flow 1.4 m·s-1 ,current density 450 A·m-2, temperature 30～40 ℃, initial concentration of glyoxal and hydrochloric acid 9.1%～16.0%, 4%～6%, respectively.

Go to article

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu Feb 2000

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu

Journal of Electrochemistry

To lower platinum loading in electrodes for polymer electrolyte membrane fuel cell, a new thin electrode fabrication technique (TEFT) was developed in this work. A series of low Pt loading electrodes with smooth and uniformed surface were fabricated by the TEFT. As a result, the maximum power density of the cell with platinum loading of 1 mg/cm2 and Nafion 117 membrane as electrolyte was up to 0.3 W.cm-2. Moreover, the effects of PTFE and Nafion content in cathodes on the performance of PEMFC with low Pt loading electrodes (1 mg Pt/cm2) were examined systematically.

Go to article

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan Feb 2000

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan

Journal of Electrochemistry

By using a cost-effective wet process,dense yttria stabilized zirconia (YSZ) films on Ni-YSZ anode substrates have been prepared successfully. The YSZ film was characterized to be around 10 μm in thickness, sufficiently dense, uniform and crack free. A single solid oxide fuel cell fabricated from the supported YSZ film electrolyte on the anode substrate and a LSM cathode prepared on the YSZ film was tested. The power density reached to 0.1 W/cm2 at 800 ℃, showing a reasonable performance. Further analysis on both electrodes shows that the anodic overpotential was much larger than IR drop (including YSZ resistance and …

Go to article

Study On Electrochemical Reduction Properties Of Nitrobenzene, Chu-Na Ma, Wen-Kui Zhang, Hui Huang, Yong-Ping Gan Nov 1999

Study On Electrochemical Reduction Properties Of Nitrobenzene, Chu-Na Ma, Wen-Kui Zhang, Hui Huang, Yong-Ping Gan

Journal of Electrochemistry

The electrochemical reduction characteristics of nitrobenzene was extensively investigated by using the techniques such as quasi-steady-state polarization, cyclic voltammetry, fast linear potential sweep method and chronoamperometry in this paper. The electroanalytic properties of Cu, Cu-Hg and Cu-Ni electrodes were evaluated. Based on the study of the transient steping behaviour of nitrobenzene to PAP, the reduction mechanism was discussed. The results showed that the transition steps existed on the electrochemical reduction of nitrobenzene in acidic solution, the reactant is also absorbed on electrodes surface. The control step in the reduction of nitrobenzene was ascribed to the diffusion of nitrobenzene and its …

Go to article

High Performance Proton Exchange Membrane Fuel Cells, Jing-Rong Yu, Bao-Lian Yi, Ming Han, Xiao-Liang Cheng, Zhi-Gang Shao, Jing-Xin Zhang Nov 1999

High Performance Proton Exchange Membrane Fuel Cells, Jing-Rong Yu, Bao-Lian Yi, Ming Han, Xiao-Liang Cheng, Zhi-Gang Shao, Jing-Xin Zhang

Journal of Electrochemistry

Proton-exchange membrane fuel cells(PEMFC) using a perfluorosulfonic acid proton exchange membrane as an electrolyte can simplify water and electrolyte management. In this paper, the effects of thickness of PEM on the performance of PEMFC were studied. The Nafion-112 PEM and low platinum loading E-TEK electrode yielded very high power density, of the order of 0.95 W/cm2. The energy-conversion efficiency, the degree of platinum utilization and stability for PEMFC using Nafion 112 and E-TEK electrode were also investigated.

Go to article

Electro-Oxidation Of Phenol On Sno2/Ti Electrodes Prepared By Thermal Oxidation, Qing-Song Zhang, Hui-Huang Wu Nov 1999

Electro-Oxidation Of Phenol On Sno2/Ti Electrodes Prepared By Thermal Oxidation, Qing-Song Zhang, Hui-Huang Wu

Journal of Electrochemistry

A SnO2/Ti electrode prepared by thermal oxidation was used as the anode for galvanostatic electrolysis in acidic solution containing phenol, the time-dependances of phenol concentration, chemical oxygen demand in solution(COD) and instantaneous current efficiency were determined during electrolysis. The results show that with the SnO2/Ti anode instead of Pt, the COD significantly decreases at the same charge passage, and average current efficiency of oxidation increases by three times. The mechanism for phenol oxidation at two electrodes was discussed.

Go to article

Investigation Of Sodium Hypophosphite Anodic Oxidizing Behavior In The Process Of Acid Electroless Nickel Deposition, Mei-Yuan Wang, Ya-Fei Kuang, Yan Xu Nov 1999

Investigation Of Sodium Hypophosphite Anodic Oxidizing Behavior In The Process Of Acid Electroless Nickel Deposition, Mei-Yuan Wang, Ya-Fei Kuang, Yan Xu

Journal of Electrochemistry

The anodic oxidizing behavior of sodium hypophosphite in the process of electroless nickle deposition (pH=5.5) was investigated with the linear potential sweep method and alternating current impedance. The results indicated that, the oxidation of NaH2PO2 was a complicated electrochemical process and affected by the concentration of NaH2PO2, the temperature of the bath, the sweep rate and the existence of nickel ion. The NaH2PO2 electrooxidation reaction was very likely preceded by heterogeneous interface transformation process, which might be the control step of the whole anodic process.

Go to article

Studies On Methods Of Fuel Cells Electrodes Preparation, Jun Gu, Sheng Sui, Guang-Qiang Li, Zhitong Sui Nov 1999

Studies On Methods Of Fuel Cells Electrodes Preparation, Jun Gu, Sheng Sui, Guang-Qiang Li, Zhitong Sui

Journal of Electrochemistry

In fuel cells, the structure of electrodes is an important factor which effect the cell performance. To improve the structure and the performance of electrodes, a new method of providing fuel cell electrodes is proposed in this paper. PTFE (polytetrafluoroethylene) and ethyne black was ground for about half an hour in a high-speed grinder, then the catalyst was added into the grinder and milled for an hour. This milled catalyst was transferred into a mixer followed by the addition of surface-active agent. After a suspension was formed, it was filtered under vacuum condition.Then a thin uniform filter-cake of the catalyst …

Go to article

First Prev Next Last