Applied Mathematics Commons^™

Special Issue : Neutrosophic Multi-Criteria Decision Making, Florentin Smarandache, Jun Ye, Yan Hui Guo

Branch Mathematics and Statistics Faculty and Staff Publications

The notion of a neutrosophic quadruple BCK/BCI-number is considered in the first article (“Neutrosophic Quadruple BCK/BCI-Algebras”, by Young Bae Jun, Seok-Zun Song, Florentin Smarandache, and Hashem Bordbar), and a neutrosophic quadruple BCK/BCI-algebra, which consists of neutrosophic quadruple BCK/BCI-numbers, is constructed. Several properties are investigated, and a (positive implicative) ideal in a neutrosophic quadruple BCK-algebra and a closed ideal in a neutrosophic quadruple BCI-algebra are studied. Given subsets A and B of a BCK/BCI-algebra, the set NQ(A,B), which consists of neutrosophic quadruple BCK/BCInumbers with a condition, is established. Conditions for the set NQ(A,B) to be a (positive implicative) ideal of a …

Spanning Tree Problem With Neutrosophic Edge Weights, Florentin Smarandache, Said Broumi, Assia Bakali, Mohamed Talea, Arindam Dey, Le Hoang Son

Branch Mathematics and Statistics Faculty and Staff Publications

Neutrosophic set and neutrosophic logic theory are renowned theories to deal with complex, not clearly explained and uncertain real life problems, in which classical fuzzy sets/models may fail to model properly. This paper introduces an algorithm for finding minimum spanning tree (MST) of an undirected neutrosophic weighted connected graph (abbr. UNWCG) where the arc/edge lengths are represented by a single valued neutrosophic numbers. To build the MST of UNWCG, a new algorithm based on matrix approach has been introduced. The proposed algorithm is compared to other existing methods and finally a numerical example is provided.

Operadores Con Conjunto Neutrosóficos De Valor Único Oversets, Undersets Y Offset, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

Neutrosophic Over-/Under-/Off-Set and Logic were defined for the first time in 1995 and published in 2007. During 1995-2016 was presented them to various national and international conferences and seminars. These new notions are totally different from other sets/logics/probabilities. We extended the neutrosophic set respectively to Neutrosophic Overset {when some neutrosophic component is > 1}, to Neutrosophic Underset {when some neutrosophic component is < 0}, and to Neutrosophic Offset {when some neutrosophic components are off the interval [0, 1], i.e. some neutrosophic component > 1 and other neutrosophic component < 0}. This is no surprise since our realworld has numerous examples and applications of over-/under-/off-neutrosophic components. Palabras clave. desbordado neutrosophic, underset neutrosophic, neutrosophic offset, neutrosophic sobre la lógica, neutrosophic bajo la lógica, neutrosophic off lógica, neutrosophic sobre la probabilidad, neutrosophic bajo probabilidad, neutrosophic de probabilidad, más de miembros (grado de pertenencia> 1), bajo de miembros (grado de pertenencia <0) , (grado de pertenencia fuera del intervalo [0, 1]) offmembership.

Neutrosophic Computing With Sympy (Computación Neutrosófica Mediante Sympy ), Maykel Leyva-Vazquez, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this article the concept of neutrosophic number is presented. Jupyter through Google Colaboratory is introduced for calculations. The Sympy library is used to perform the process of neutrosophic computation. Systems of linear neutrosóficas equations are solved by means of the symbolic computation in python. A case study was developed for the determination of vehicular traffic with indeterminacy. As future works are the development of new applications in different areas of engineering and science.

Fundamentals Of Neutrosophic Logic And Sets And Their Role In Artificial Intelligence (Fundamentos De La Lógica Y Los Conjuntos Neutrosóficos Y Su Papel En La Inteligencia Artificial ), Florentin Smarandache, Maykel Leyva-Vazquez

Branch Mathematics and Statistics Faculty and Staff Publications

Neutrosophy is a new branch of philosophy which studies the origin, nature and scope of neutralities. This has formed the basis for a series of mathematical theories that generalize the classical and fuzzy theories such as the neutrosophic sets and the neutrosophic logic. In the paper, the fundamental concepts related to neutrosophy and its antecedents are presented. Additionally, fundamental concepts of artificial intelligence will be defined and how neutrosophy has come to strengthen this discipline.

N-Valued Refined Neutrosophic Logic And Its Applications To Physics (Lógica Neutrosófica Refinada N-Valuada Y Sus Aplicaciones A La Física), Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper we present a short history of logics: from particular cases of 2-symbol or numerical valued logic to the general case of n-symbol or numerical valued logic. We show generalizations of 2-valued Boolean logic to fuzzy logic, also from the Kleene’s and Lukasiewicz’ 3-symbol valued logics or Belnap’s 4-symbol valued logic to the most general nsymbol or numerical valued refined neutrosophic logic. Examples of applications of neutrosophic logic to physics are listed in the last section. Similar generalizations can be done for n-Valued Refined Neutrosophic Set, and respectively.

Modelo De Recomendación Basado En Conocimiento Y Números Svn, Maykel Leyva-Vazquez, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

Recommendation models are useful in the decision-making process that allow the user a set of options that are expected to meet their expectations. Recommendation models are useful in the decision-making process that offer the user a set of options that are expected to meet their SVN expectations to express linguistic terms.

The Use Of Item Response Theory In Survey Methodology: Application In Seat Belt Data, Mark K. Ledbetter, Norou Diawara, Bryan E. Porter

Mathematics & Statistics Faculty Publications

Problem: Several approaches to analyze survey data have been proposed in the literature. One method that is not popular in survey research methodology is the use of item response theory (IRT). Since accurate methods to make prediction behaviors are based upon observed data, the design model must overcome computation challenges, but also consideration towards calibration and proficiency estimation. The IRT model deems to be offered those latter options. We review that model and apply it to an observational survey data. We then compare the findings with the more popular weighted logistic regression. Method: Apply IRT model to the observed data …

Switching Mechanism In The B-1revtilted Phase Of Bent-Core Liquid Crystals, Carlos J. García-Cervera, Tiziana Giorgi, Sookyung Joo, Xin Yang Lu

Mathematics & Statistics Faculty Publications

The B_1RevTilted is a uniformly smectic tilted columnar phase in which the macroscopic polarization can be reorientated via electric field. To study the effects on the reorientation mechanism of the various physical parameters, we analyze a local, and a non-local Landau-de Gennes-type energy functional. For the case of large columnar samples, we show that both energies give the same qualitative behavior, with a relevant role played by the terms that describe the interaction between polarization and nematic directors. We also obtain existence of the L²-gradient flow in metric spaces for the full local energy.

Operational Research: Multi-Period Stowage Policies Within A Multi-Zone Storage Framework., Joseph Loeffler

All Graduate Theses, Dissertations, and Other Capstone Projects

This paper will be extending the single period stowage decision model presented by [Yuan, 2017] into a multi-period stowage decision model. The stowage decision determines how incoming items are distributed and stored across multiple storage zones. The amount of items that can be picked in any given storage zone is finite within a single time period. With this constraint, this research attempts to optimize how items are stored across many zones to meet uncertain demand requirements. A simulation study will be performed to compare the stowage policies given by [Yuan, 2017] to see how well they generalize to multi-period model. …

The Vendor In A Retail Setting: A Survey, Jesse Laporte

All Graduate Theses, Dissertations, and Other Capstone Projects

We consider the problem of managing nonperishable inventory as a vendor in a grocer setting. To manage inventory effectively, we must meet the demand of our customers as closely as we can. Too much inventory results in holding costs and ties up a large amount of capital and too little inventory results in lost sales or substitution. It is typical in a retail setting for the vendor to have access to past ordering data, but this data is only representative of the demand when we have sufficient inventory. Otherwise, the demand exceeds the inventory on hand and we lose, in …

Using A Coupled Bio-Economic Model To Find The Optimal Phosphorus Load In Lake Tainter, Wi, Mackenzie Jones

Williams Honors College, Honors Research Projects

In Dunn County, Wisconsin the lakes suffer from algae blooms due to excess phosphorus runoff. A coupled bio-economic model is studied with the intent of finding the optimal level of phosphorus that should be allowed into the lake depending on certain biologic and economic parameters. We model the algae and phosphorus concentration in the lake over time based off the phosphorus input. Community welfare is modeled by comparing the costs and benefits of phosphorus fertilizer. This model is proposed to find the phosphorus level that maximizes community welfare and then determine how certain environmental and social change initiatives will affect …

A Novel Method For Fabricating Material Extrusion 3d Printed Polycarbonate Parts Reinforced With Continuous Carbon Fiber And Improvement Of Strength By Oven And Microwave Heat Treatment, Md Naim Jahangir

Open Access Theses & Dissertations

The study of continuous carbon fiber-based material extrusion FDM printed materials can eliminate the problem of lower strength of additive manufactured part. Additive manufacturing, the process of fabricating complex shaped specimen with a layer-by-layer manufacturing technique, is being utilized in industrial application rapidly. Though the biomedical application may not be literally dependent on strength property, the factor is not deniable for the structural uses of 3D printed polymers. Insufficient neck growth and adhesion between layers are the driving factors of lower strength. The presence of porosity in the 3D printed parts is a major drawback and studies showed that the …

A Mixed Finite Element Method For The Coupling Of Linear Elasticity And Stokes Flow, Maranda Bean

Open Access Theses & Dissertations

The complex interaction between fluids and structures require the coupling the laws concerning structure mechanics and fluid dynamics and are of vital importance to many scientific and engineering fields. We propose a method for modeling the coupling of a linearly elastic solid and slow fluid flow modeled by Stokes equations. The model equations are expressed in terms of displacement, velocity and stress. With these primary variables, we use a single mixed finite element space based on the Hellinger-Reissner variational principle for linear elasticity to discretize the resulting system spatially. This results in more accurate approximations for stress than those obtained …

Understanding The Nature Of Nanoscale Wetting Through All-Atom Simulations, Oliver Evans

Williams Honors College, Honors Research Projects

The spreading behavior of spherical and cylindrical water droplets between 30Å and 100Å in radius on a sapphire surface is investigated using all-atom molecular dynamics simulations for durations on the order of tens of nanoseconds. A monolayer film develops rapidly and wets the surface, while the bulk of the droplet spreads on top of the monolayer, maintaining the shape of a spherical cap. Unlike previous simulations in the literature, the bulk radius is found to increase to a maximum value and receed as the monolayer continues to expand. Simple time and droplet size dependence is observed for monolayer radius and …

A Mathematical Model Of A Corrosion System Containing Inhibitors, Abigael Frey

Williams Honors College, Honors Research Projects

A two dimensional model is developed to describe how organic and inorganic inhibitors slows down the corrosion damage of a coated metal plate that contains a defect. The model contains a metal covered on one side by a coating that contains organic and inorganic inhibitors, electrolytes that are on the outside of the coating, and a small defect in the coating. The defect is an area where the coating is more porous and allows the electrolytes to leak in faster. In this model the organic inhibitor is presumed to be dissolved into the coating and the inorganic inhibitor is released …

Computational Investigation Of Energetic Materials: Influence Of Intramolecular And Intermolecular Interactions On Sensitivity, Ashley Lauren Shoaf

Chemistry & Biochemistry Theses & Dissertations

The development of novel high energy density materials (HEDMs) with superior energetic properties depends on characterizing how and why detonation occurs. Detonation is highly energetic and a nearly instantaneous process, making experimental studies challenging; thus, computational modeling through density functional theory (DFT) and molecular dynamics (MD) can be used to propose weakened, or activated, bonds that break to initiate explosive decomposition, termed trigger bonds. Bond activation is characterized by the Wiberg bond index (WBI), a measure of interatomic electron density. Trigger bonds in HEDMs are commonly found in explosophores, functional groups that contribute to energetic potential such as X-NO_{2 …}

Penalized Mixed-Effects Ordinal Response Models For High-Dimensional Genomic Data In Twins And Families, Amanda E. Gentry

Theses and Dissertations

The Brisbane Longitudinal Twin Study (BLTS) was being conducted in Australia and was funded by the US National Institute on Drug Abuse (NIDA). Adolescent twins were sampled as a part of this study and surveyed about their substance use as part of the Pathways to Cannabis Use, Abuse and Dependence project. The methods developed in this dissertation were designed for the purpose of analyzing a subset of the Pathways data that includes demographics, cannabis use metrics, personality measures, and imputed genotypes (SNPs) for 493 complete twin pairs (986 subjects.) The primary goal was to determine what combination of SNPs and …

Wavelet Anova Bisection Method For Identifying Simulation Model Bias, Andrew D. Atkinson, Raymond R. Hill, Joseph J. Pignatiello Jr., G. Geoffrey Vining, Edward D. White, Eric Chicken

Faculty Publications

High-resolution computer models can simulate complex systems and processes in order to evaluate a solution quickly and inexpensively. Many simulation models produce dynamic functional output, such as a set of time-series data generated during a process. These computer models require verification and validation (V&V) to assess the correctness of these simulations. In particular, the model validation effort evaluates if the model is an appropriate representation of the real-world system that it is meant to simulate. However, when assessing a model capable of generating functional output, it is useful to learn more than simply whether the model is valid or invalid. …

Inclusion Of Blocking Power For A Complete Voting Power Analysis In The Imf, Shiwani Varal

Senior Independent Study Theses

The International Monetary Fund (IMF) calculates the voting power of a country by dividing the total of one member's votes by the total of all members' votes. This method of calculating the power of a state judges power as voting weight. However, voting weights are the total number of votes a country has in an institution, while voting power is the influence a country has on a policy decision. A better approach to calculate this voting power within an institution is by using voting power indices. However, literature only calculates the winning power, while voting power is defined as the …

High-Order Integral Equation Methods For Quasi-Magnetostatic And Corrosion-Related Field Analysis With Maritime Applications, Robert Pfeiffer

Theses and Dissertations--Electrical and Computer Engineering

This dissertation presents techniques for high-order simulation of electromagnetic fields, particularly for problems involving ships with ferromagnetic hulls and active corrosion-protection systems.

A set of numerically constrained hexahedral basis functions for volume integral equation discretization is presented in a method-of-moments context. Test simulations demonstrate the accuracy achievable with these functions as well as the improvement brought about in system conditioning when compared to other basis sets.

A general method for converting between a locally-corrected Nyström discretization of an integral equation and a method-of-moments discretization is presented next. Several problems involving conducting and magnetic-conducting materials are solved to verify the accuracy …

Validation Of A Lottery, Xiaona Zhou

Publications and Research

The NY Pick 4 lottery consists of four "randomly" chosen digits from 0 to 9. For this to be fair, each digit should be equally likely to occur. To determine whether this is the case, a Chi-squared goodness of fit test will be applied to historical data. This provides a quantitative way of measuring how well the observed frequency of digits matches our expectations of a fair lottery. The Chi-squared distribution gives us a number beyond which we reject fairness. However, there is another possibility. If the difference between the fair model and the observed frequency is too small, that …

Pseudo-Companion Matrices For Polynomial Systems, Melinda Kleczynski

Dissertations, Master's Theses and Master's Reports

Roots of a scalar polynomial in one variable are frequently found by computing the eigenvalues of the standard companion matrix. In this exploratory work, we introduce the pseudo-companion matrix for finding roots of multivariable polynomial systems. In some cases, a perturbation of the polynomial system is used for the matrix construction, yielding approximate roots of the original polynomial system. The coordinates of the roots, or their approximations, are obtained from the eigenvectors of this matrix. In this thesis, we describe the process of constructing the pseudo-companion matrix and computing the polynomial roots using illustrative examples.

High Accuracy Methods And Regularization Techniques For Fluid Flows And Fluid-Fluid Interaction, Mustafa Aggul

Dissertations, Master's Theses and Master's Reports

This dissertation contains several approaches to resolve irregularity issues of CFD problems, including a decoupling of non-linearly coupled fluid-fluid interaction, due to high Reynolds number. New models present not only regularize the linear systems but also produce high accurate solutions both in space and time. To achieve this goal, methods solve a computationally attractive artificial viscosity approximation of the target problem, and then utilize a correction approach to make it high order accurate. This way, they all allow the usage of legacy code | a frequent requirement in the simulation of fluid flows in complex geometries. In addition, they all …

Wildfire Emissions In The Context Of Global Change And The Implications For Mercury Pollution, Aditya Kumar

Dissertations, Master's Theses and Master's Reports

Wildfires are episodic disturbances that exert a significant influence on the Earth system. They emit substantial amounts of atmospheric pollutants, which can impact atmospheric chemistry/composition and the Earth’s climate at the global and regional scales. This work presents a collection of studies aimed at better estimating wildfire emissions of atmospheric pollutants, quantifying their impacts on remote ecosystems and determining the implications of 2000s-2050s global environmental change (land use/land cover, climate) for wildfire emissions following the Intergovernmental Panel on Climate Change (IPCC) A1B socioeconomic scenario.

A global fire emissions model is developed to compile global wildfire emission inventories for major atmospheric …

Optimization And Control Of An Array Of Wave Energy Converters, Jianyang Lyu

Dissertations, Master's Theses and Master's Reports

This study explored optimal configuration of both the array layout and the dimension of each WEC in the array. The array contains heaving buoys with full interaction and exact hydrodynamics. Optimization of dimension was done on each WEC in the array with a given optimal layout, and a higher q-factor was achieved. Both impedance matching optimal control and derivative control were employed, which provides both theoretical maximum energy and a more realistic case. Then the work was expanded to optimization of both the array layout and the dimension of each WEC in the array. An average of 39.21% higher q-factor …

Positive Definite Functions And Dual Pairs Of Locally Convex Spaces, Daniel Alpay, Saak Gabriyelyan

Mathematics, Physics, and Computer Science Faculty Articles and Research

Using pairs of locally convex topological vector spaces in duality and topologies defined by directed families of sets bounded with respect to the duality, we prove general factorization theorems and general dilation theorems for operator-valued positive definite functions.

Copula Theory And Regression Analysis, Mayooran Thevaraja

All Graduate Theses, Dissertations, and Other Capstone Projects

Researchers are often interested to study in the relationships between one variable and several other variables. Regression analysis is the statistical method for investigating such relationship and it is one of the most commonly used statistical Methods in many scientific fields such as financial data analysis, medicine, biology, agriculture, economics, engineering, sociology, geology, etc. But basic form of the regression analysis, ordinary least squares is not suitable for actuarial applications because the relationships are often nonlinear and the probability distribution of the response variable may be non-Gaussian distribution. One of the method that has been successful in overcoming these challenges …

Nonlinear Coupled Effects In Nanomaterials, Sia Bhowmick

Theses and Dissertations (Comprehensive)

Materials at the nanoscale have different chemical, structural, and optoelectrical properties compared to their bulk counterparts. As a result, such materials, called nanomaterials, exhibit observable differences in certain physical phenomena. One such resulting phenomenon called the piezoelectric effect has played a crucial role in miniature self-powering electronic devices called nanogenerators which are fabricated by using nanostructures, such as nanowires, nanorods, and nanofilms. These devices are capable of harvesting electrical energy by inducing mechanical strain on the individual nanostructures. Electrical energy created in this manner does not have environmental limitations. In this thesis, important coupled effects, such as the nonlinear piezoelectric …

Particle Filters For State Estimation Of Confined Aquifers, Graeme Field

UNF Graduate Theses and Dissertations

Mathematical models are used in engineering and the sciences to estimate properties of systems of interest, increasing our understanding of the surrounding world and driving technological innovation. Unfortunately, as the systems of interest grow in complexity, so to do the models necessary to accurately describe them. Analytic solutions for problems with such models are provably intractable, motivating the use of approximate yet still accurate estimation techniques. Particle filtering methods have emerged as a popular tool in the presence of such models, spreading from its origins in signal processing to a diverse set of fields throughout engineering and the sciences including …