Open Access. Powered by Scholars. Published by Universities.®

Applied Mathematics Commons

Open Access. Powered by Scholars. Published by Universities.®

Tanzania Journal of Engineering and Technology (TJET)

Discipline
Keyword
Publication Year

Articles 31 - 60 of 131

Full-Text Articles in Applied Mathematics

Optimization Pump As Turbine Coupled To A Self-Excited Induction Generator Using Multi-Objective Genetic Algorithm, Emanuel J. Nyirenda Apr 2024

Optimization Pump As Turbine Coupled To A Self-Excited Induction Generator Using Multi-Objective Genetic Algorithm, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

As a way of accelerating the deployment of affordable and clean renewable energy generation technologies, applying a pump working as a turbine coupled to a self-excited induction generator is gaining popularity in various areas including energy recovery and micro hydro systems. However, it is currently challenging to predict the performance of the PAT-SEIG system and there is no agreed-upon rule on the selection of the appropriate system to be installed at a particular site. This paper has presented multi-objective optimization to select the best operating point of the PAT-SEIG system. The results show that the peak efficiencies for the PAT …


Optimal Load Shedding During Service Restoration In Electrical Secondary Distribution Network Based On Reinforcement Learning, Rukia J. Mwifunyi Apr 2024

Optimal Load Shedding During Service Restoration In Electrical Secondary Distribution Network Based On Reinforcement Learning, Rukia J. Mwifunyi

Tanzania Journal of Engineering and Technology (TJET)

Increased stress in traditional power systems results in blackouts due to voltage instability attributed to a mismatch between available capacity and load demand, especially in distribution networks. Service restoration schemes are designed to return power supply to the affected parts of the networks. The availability of insufficient supply is a complex problem that requires operational experience or an automatic system. The stochastic nature of load demand significantly impacts service restoration as it results in increased restored demand in case a fault occurs during off-peak hours and helps reduce overload if the fault occurs during peak hours. The study adopts an …


Evaluation Of Cybersecurity In Remote Working Settings For Mobile Network Operators, Victoria Mahabi Apr 2024

Evaluation Of Cybersecurity In Remote Working Settings For Mobile Network Operators, Victoria Mahabi

Tanzania Journal of Engineering and Technology (TJET)

Cybersecurity has increasingly been a primary concern to people as technology advances and allows them to work remotely. This study thus evaluated the cybersecurity posture for organisations that have opted for remote working culture, whereas emerging cyber threats, practices to combat them, and appropriate guidelines for managing cyber threats were discussed. The study used a descriptive design with a quantitative approach from 118 information technology personnel working for Tanzania's three major mobile network operators (MNOs). SPSS analysed the collected data. The study revealed that predominant cyber-threats affecting MNOs in remote working include human errors, phishing attacks, malicious domains, denial of …


Study Of The Effects Of Thermal Aging Coupled With Shot-Peening Treatment Of Carbonitrided Din 1.6587 Low Alloy Steel On Retained Austenite And Residual Stresses, Richard J. Katemi Apr 2024

Study Of The Effects Of Thermal Aging Coupled With Shot-Peening Treatment Of Carbonitrided Din 1.6587 Low Alloy Steel On Retained Austenite And Residual Stresses, Richard J. Katemi

Tanzania Journal of Engineering and Technology (TJET)

This work investigated the effects of thermal aging and shot-peening of carbonitrided 1.6587 steel grade on retained austenite and residual stresses. After carbonitriding samples contained maximum of 0.87% carbon, 0.34% nitrogen and 50 mass. -% retained austenite. Thermal aging conditions investigated were -30°C, 90°C and 150°C while the aging period were 14, 96 and 720 hours. After thermal aging, some of the samples were subjected to shot-peening treatment using standard cut wire shots StD – G3 - 0.6 mm VDFI 8001 with intensity in the range of 0.25 to 0.30 mmA and coverage of 1.00 to 1.24 x 98%. It …


Causes And Consequences Of Inefficient Drilling And Blasting In Mine Development Headings: A Case Study Of Hard Rock Gold Mining Operations In Northern Tanzania, George Bennett Apr 2024

Causes And Consequences Of Inefficient Drilling And Blasting In Mine Development Headings: A Case Study Of Hard Rock Gold Mining Operations In Northern Tanzania, George Bennett

Tanzania Journal of Engineering and Technology (TJET)

Despite the introduction of the perimeter blasting technique at the Tulawaka Gold Mine, the mine continued to suffer from an overbreak of mine development headings, with an average overbreak of 24% every 22 m, which is approximately twice the acceptable 10% overbreak. The causes of this problem include ineffective drilling practices and uneven and excessive charging of explosives, resulting in a slightly high powder factor of 3.94 kg/m3 instead of 3.8 kg/m3, as per the design. The problem of overbreak resulted in ore dilution, a longer mine development cycle time and additional costs of approximately US$ 45 per cut, especially …


A Two-Stage Based Life Cycle And Principal Component Analysis For Decision Support Of Potential Municipal Solid Wastes Management Scenarios, Case Study Dar Es Salaam, Tanzania, Edwin Richard Ndibalema Dr Feb 2024

A Two-Stage Based Life Cycle And Principal Component Analysis For Decision Support Of Potential Municipal Solid Wastes Management Scenarios, Case Study Dar Es Salaam, Tanzania, Edwin Richard Ndibalema Dr

Tanzania Journal of Engineering and Technology (TJET)

In most of the urban areas of Tanzania, poor and inadequate solid waste management is a growing environmental and public health concern. Despite an array of solid waste management options, choosing an appropriate one remains a challenge. This study applied a novel two-stage-based approach to assess the environmental impacts and sustainability performance of the 27 scenarios for municipal solid wastes (MSW) management of Dar es Salaam City, Tanzania. In the first stage, the study utilized a life cycle analysis (LCA) to quantify the environmental impacts of MSW scenarios. In the second stage, the study used the principal component analysis (PCA) …


Absorbance Enhancement Of A Treated Tanzanian Kaolin For Removal Of Synthetic Dyes From Water, Samwel Paul Mziray Feb 2024

Absorbance Enhancement Of A Treated Tanzanian Kaolin For Removal Of Synthetic Dyes From Water, Samwel Paul Mziray

Tanzania Journal of Engineering and Technology (TJET)

The absorbance efficiency of local kaolin clay from Tanzania (Pugu kaolin) has been enhanced to improve its utilization in removal of textile dyes from water. The clay was acid-activated using H2SO4, after calcination at 750oC. Characterization by XRF, XRD, ATR-FTIR and Porosimeter showed kaolinite [Al2Si2O5(OH)4], silica (SiO2) and microcline [KAlSi3O8] as the main phases. Upon acid treatment, silica increased from 44.18% to 58.81% due to the appearance of tridymite, and alumina decreased from 26.70% to 12.74% due to disappearance of the kaolinite. Surface area increased from 15.36 to 149.61 m2/g due to removal of acid-soluble impurities. The chemical composition showed …


Stack For Computational Science, Mathematics And Engineering E-Learners, Idrissa S. Amour Feb 2024

Stack For Computational Science, Mathematics And Engineering E-Learners, Idrissa S. Amour

Tanzania Journal of Engineering and Technology (TJET)

Petroleum economic evaluation involves estimating revenues from forecasted production profiles and field costs including capital expenditures (CAPEX), drilling expenses (DRILLEX), and operating expenses (OPEX). The existing cost-estimating tool requires several inputs making it time-intensive and difficult to use with few data during the early stages of projects. Majority of the previously developed time saving cost estimations proxy models rely on unrealistic assumptions that include uniform operational costs for different fields with a different number of wells, casings, and drilled depths. This work focused at developing proxy models that consider the variability of the development costs with different parameters. The developed …


Modelling Prediction Of Cities Real Estate Price Trend Using Recurrent Neural Network: A Case Of Dar Es Salaam City, Ellen Kalinga Nov 2023

Modelling Prediction Of Cities Real Estate Price Trend Using Recurrent Neural Network: A Case Of Dar Es Salaam City, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Real estate refers to a class of real property such as land and its associated infrastructure. The prediction of real estate prices in cities, which is affected by a number of parameters, is an open research problem. The lack of reliable and effective tools for price forecasting in real estate, especially in residential housing, can adversely affect investment flows and the growth of the real estate sector. Taking Tanzania as an example, the price prediction practices rely on human suggestions that are prone to personal bias and subjective to price hysteria for personal gain and impact consumer expectations. To address …


A Multitask Learning Framework For Pilot Decontamination In 5g Massive Mimo, Crallet Victor Sep 2023

A Multitask Learning Framework For Pilot Decontamination In 5g Massive Mimo, Crallet Victor

Tanzania Journal of Engineering and Technology (TJET)

Reference signals enable the acquisition of channel state information (CSI) for purposes such as channel estimation, beam selection, precoding, and symbol detection in 5G massive multiple-input multiple output (MAMIMO) systems. Eventually, as more and more users and cells are added, orthogonal reference signals become few which leads to pilot contamination. Pilot contamination limits the performance and occurs when non-orthogonal reference signals occupy time-frequency resources that are alike. Learning-based techniques have been proposed to alleviate it. However, each can only learn to perform a single task namely pilot assignment, power allocation, pilot design, or de-noising for pilot decontamination. In addition, each …


Assessment On Usage Of The Library Website Resources By Students In The Information Studies Programme At The University Of Dar Es Salaam, Hosea N. Mungwabi Jun 2023

Assessment On Usage Of The Library Website Resources By Students In The Information Studies Programme At The University Of Dar Es Salaam, Hosea N. Mungwabi

Tanzania Journal of Engineering and Technology (TJET)

The study investigated students' usage of electronic resources available on the UDSM Library's website. Specifically, the study determined whether information studies students were aware of the electronic resources, how frequently they used them, and whether their demographic characteristics influenced their usage. The study also examined the students' satisfaction with the functional and non functional attributes of the website resources. A mixed-methods research design combining both qualitative and quantitative data collection methods was used. The sample consisted of 118 student respondents who were selected using a stratified random sampling technique. The data were collected through questionnaires and interviews with class representatives …


Deep Learning Model Compression Techniques: Advances, Opportunities, And Perspective, Hubert Msuya Jun 2023

Deep Learning Model Compression Techniques: Advances, Opportunities, And Perspective, Hubert Msuya

Tanzania Journal of Engineering and Technology (TJET)

Recently, deep learning (DL) models have excelled in a wide range of fields. All of these successes are built on intricate DL models. The hundreds of millions or even billions of parameters and high-performance computing graphical processing units or tensor processing units are largely responsible for their achievement. DL model integration into real-time devices with tight latency limitations, limited memory, and power-constrained requirements is the key driving force behind investigation of DL model compression techniques. Also, there is an increase in data availability that encourages multimodal fusion in DL models to boost the models' predictive accuracy. In order to create …


Performance Evaluation Of Full Array, Sub-Array And Overlapped Sub-Array Hybrid Beamforming Architectures For Massive Mimo Systems, Godwin Mruma Gadiel Jun 2023

Performance Evaluation Of Full Array, Sub-Array And Overlapped Sub-Array Hybrid Beamforming Architectures For Massive Mimo Systems, Godwin Mruma Gadiel

Tanzania Journal of Engineering and Technology (TJET)

The technological advancement in wireless communication, promises high data rate for end users. This has led to the possibility of smart cities, inter connected vehicles, and virtual reality applications. One of the recent technologies in wireless communication is massive MIMO where large number of antennas are deployed at the transmitter or receiver. This is possible due to the use of mmWave in wireless communication. With massive MIMO, beamforming technique can be employed in the communication system. Beamforming is the ability of communication system to direct power to the intended users and to cancel power at non-intended users and thus significantly …


A Mathematical Algorithm Approach For Estimating Water-Based Paint Requirements For A Given Wall, Ismail W. R. Taifa Dr Feb 2023

A Mathematical Algorithm Approach For Estimating Water-Based Paint Requirements For A Given Wall, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

The research aimed to improve the accuracy of estimating water based paint requirements for a given wall using mathematical algorithms. The approach used in this study included a survey and document review to obtain details concerning paint. The study focused on water-based paints, including silk, weather guard, emulsion hi-cover and polyvinyl acetate (PVA) roof paint used in Tanzania’s building and construction industry. Data collected from the field study were analysed systematically. It was observed that there is a high level of familiarity in improving the accuracy of estimation of the required water-based paints, namely silk, weather guard, emulsion hi-cover and …


Development Of An Operational Satellite-Based Flood Monitoring Model For Tanzania, Andrew Kimati Dec 2022

Development Of An Operational Satellite-Based Flood Monitoring Model For Tanzania, Andrew Kimati

Tanzania Journal of Engineering and Technology (TJET)

Timely information during water related disasters is of utmost importance for flood preparedness and risk reduction. However, the conventional ground-based photographic monitoring of flooded areas is an expensive and time-consuming exercise. Satellite remote sensing is a quick and affordable approach that can be used for concurrent floods detection at different scales. This is important as it facilitates timely information for emergency response to disaster management departments, even in scarcely instrumented catchments. This study presents a novel approach for flood tracking using satellite image remote sensing science to map flood affected areas immediately after occurrence of rainfall events. An open-source water …


Occlusion Handler Density Networks For 3d Multimodal Joint Location Of Hand Pose Hypothesis, Stanley Tito Dec 2022

Occlusion Handler Density Networks For 3d Multimodal Joint Location Of Hand Pose Hypothesis, Stanley Tito

Tanzania Journal of Engineering and Technology (TJET)

(HPE) process is an ill-posed challenge. This is due to severe self occluded joints of the hand. The existing approaches for predicting pose parameters of the hand, utilize a single-value mapping of an input image to generate final pose output. This way makes it difficult to handle occlusion especially when it comes from the multimodal pose hypothesis. This paper introduces an effective method of handling multimodal joint occlusion using the negative log-likelihood of a multimodal mixture-of-Gaussians through a hybrid hierarchical mixture density network (HHMDN). The proposed approach generates multiple feasible hypotheses of 3D poses with visibility, unimodal and multimodal distribution …


Filtering Effect On Rssi-Based Indoor Localization Methods, Kwame S. Ibwe Dec 2022

Filtering Effect On Rssi-Based Indoor Localization Methods, Kwame S. Ibwe

Tanzania Journal of Engineering and Technology (TJET)

Indoor positioning systems are used to locate and track objects in an indoor environment. Distance estimation is done using received signal strength indicator (RSSI) of radio frequency signals. However, RSSI is prone to noise and interference which can greatly affect the accuracy performance of the system. In this paper Internet of Things (IoT) technologies like low energy Bluetooth (BLE), WiFi, LoRaWAN and ZigBee are used to obtain indoor positioning. Adopting the existing trilateration and positioning algorithms, the Kalman, Fast Fourier Transform (FFT) and Particle filtering methods are employed to denoise the received RSSI signals to improve positioning accuracy. Experimental results …


A Genetic Algorithm Approach To Optimal Sizing And Placement Of Distributed Generation On Nigerian Radial Feeders, Adelowo Balogun Dec 2022

A Genetic Algorithm Approach To Optimal Sizing And Placement Of Distributed Generation On Nigerian Radial Feeders, Adelowo Balogun

Tanzania Journal of Engineering and Technology (TJET)

Mitigating power loss and voltage profile problems on radial distribution networks has been a major challenge to distribution system operators. While deployment of distributed generation, as compensators, has made a suitable solution option, optimum placement and sizing of the compensators has been a concern and it has thus been receiving great attention. Meta-heuristic algorithms have been found efficacious in this respect, yet the use of the algorithms in addressing problems of radial feeders is still comparatively low in Nigeria where analytical and numerical programming methods are common. Hence; the use of genetic algorithm to site and size distributed generator for …


Characteristics Of Extreme Precipitation And Their Effect On Bean Yield In Rwanda, Paul Ts Limbu Sr Dec 2022

Characteristics Of Extreme Precipitation And Their Effect On Bean Yield In Rwanda, Paul Ts Limbu Sr

Tanzania Journal of Engineering and Technology (TJET)

This study examines the characteristics of extreme precipitation and its effect on bean yield in Rwanda from 1981 to 2017. Over the study area, two rainy seasons, March to May (MAM) and September to December (SOND), account for approximately 80% of total rainfall. The spatial distribution of rainfall over Rwanda revealed that the first three EOF modes of MAM rainfall vary by 72.72 percent over the study period, while the first three EOF modes of SOND rainfall vary by 57.48 percent. The spatial analysis of extreme precipitation reveals that during wet years, the majority of the country's western regions receive …


An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya Jul 2022

An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya

Tanzania Journal of Engineering and Technology (TJET)

Miner safety and security is a major challenge around the world due to the exposure to toxic gases that are frequently released in underground mines. Miners' health is adversely affected primarily by toxic gases, which endanger the workers' lives. Furthermore, human sensory abilities do not detect these dangerous gases. As a result, this paper proposes a safety monitoring system that includes a temperature sensor, humidity sensor, and gas sensors to detect harmful gases and alert miners to those harmful gases using the smart helmet they wear. These gases are transmitted to the control station via the cloud using Internet of …


Real-Time Data Analytics For Monitoring Electricity Consumption Using Iot Technology, Waheed Muhammad Sanya, Gaurav Bajpai, Omar Haji Kombo, Evariste Twahirwa Jun 2022

Real-Time Data Analytics For Monitoring Electricity Consumption Using Iot Technology, Waheed Muhammad Sanya, Gaurav Bajpai, Omar Haji Kombo, Evariste Twahirwa

Tanzania Journal of Engineering and Technology (TJET)

Rising electricity bills as a result of climate variability and new home electrical and electronic appliances are becoming a major source of concern for most end users. Consumers are typically unaware of their household electricity consumption patterns and the costs associated with them, making proper planning and budgeting difficult. Monitoring and controlling energy consumption on appliances can reduce energy costs for end-users. The Internet of Things (IoT) has the potential to provide remote monitoring and control of devices via automated monitoring and control. In this study, we propose an IoT-enabled system for monitoring and controlling energy consumption in homes to …


Digital Skills And Self-Employment Among Graduates Of Technical Higher Education Institutions In Tanzania, Charles Raphael Jun 2022

Digital Skills And Self-Employment Among Graduates Of Technical Higher Education Institutions In Tanzania, Charles Raphael

Tanzania Journal of Engineering and Technology (TJET)

Digital skills are the driving forces for innovative, inclusive and sustainable growth through innovations and digitalization which in turn stimulate job creation, alleviate poverty, reducing inequality, facilitating the delivery of goods and services. However, large number of graduates is shown to be weak in digital skills in the industry hence affect their employability including self-employment. Recently, the Technical Higher Education Institutions (THEIs) took some initiatives to instill the digital skills to their respective students. This study therefore assessed the level of competence of digital skills among graduates following the initiatives taken by the THEIs and their influence on self-employment. It …


Real-Time Complex Hand Gestures Recognition Based On Multi- Dimensional Features, Isack Bulugu Feb 2022

Real-Time Complex Hand Gestures Recognition Based On Multi- Dimensional Features, Isack Bulugu

Tanzania Journal of Engineering and Technology (TJET)

Gesture recognition is broadly utilized within the field of sensing. There are basically three gesture recognition methods based on computer vision, depth sensor and motion sensor. Motion sensor-based gesture recognition has few input data, fast speed, and direct access to three- dimensional information of the hand. The advantages of traditional motion sensor-based gesture recognition have gradually become a current research hotspot. The essence of traditional motion sensor-based gesture recognition is a pattern recognition problem, and its accuracy depends heavily on the feature dataset extracted from prior experience. Unlike traditional pattern recognition methods, deep learning can be used to a large …


Resilient Modulus Of Siliciclastic Unbound Granular Materials Under Repeated Wheel Loading, Siya Rimoyi Feb 2022

Resilient Modulus Of Siliciclastic Unbound Granular Materials Under Repeated Wheel Loading, Siya Rimoyi

Tanzania Journal of Engineering and Technology (TJET)

The Resilient Modulus (Mr) is a fundamental material property input in modern Mechanistic-Empirical (M-E) pavements structural design. Empirical pavement design methods have been in use over a long period during which large databases of four- days-soaked California Bearing Ratio (CBR) values at or near the Maximum Dry Density have been generated in the strength assessments for Unbound Granular Materials (UGMs). In the adoption of the M-E design approach researchers have so far attempted with various degrees of success to develop models to derive resilient modulus from the conventional CBR-based databases. This study provides an extensive laboratory experimental study to investigate …


Complete Neighbourhood Search Heuristic Algorithm For Portfolio Optimization, Collether John Feb 2022

Complete Neighbourhood Search Heuristic Algorithm For Portfolio Optimization, Collether John

Tanzania Journal of Engineering and Technology (TJET)

In portfolio optimization, the fundamental goal of an investor is to optimally allocate investments between different assets. Mean-variance optimization methods make unrealistic assumptions to solve the problem of optimal allocation. On the other hand, when realistic constraints like holding size and cardinality are introduced it leads to optimal asset allocation which differ from the mean variance optimization. The resulting optimization problem become quite complex as it exhibits multiple local extrema and discontinuities. Heuristic algorithms work well for the complex problem. Therefore, a heuristic algorithm is developed which is based on hill climbing complete (HC-C). It is utilized to solve the …


Socio-Technical Perspective For Electronic Tax Information System In Tanzania, Lucas Ngowi, Ellen Kalinga Jul 2021

Socio-Technical Perspective For Electronic Tax Information System In Tanzania, Lucas Ngowi, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Socio-technical systems theory has rarely been used by system architects in setting up computing systems. However, the role of socio-technical concepts in computing, which is becoming social in nature, has made the concepts more relevant and commercial. Tax information systems are examples of such systems because they are influenced by external variables such as the political environment, technological trends, and social environment, introducing complexity in their deployment and determining the type of e-services and their delivery to a diverse group of people. It was observed that in Tanzania there is resistance, reluctance and minimal use of electronic tax system because …


Land Use/Cover Change And Their Impacts On Streamflow In Kikuletwa Catchment Of Pangani River Basin, Tanzania, Upendo Msovu Dec 2019

Land Use/Cover Change And Their Impacts On Streamflow In Kikuletwa Catchment Of Pangani River Basin, Tanzania, Upendo Msovu

Tanzania Journal of Engineering and Technology (TJET)

Streamflow perturbation is highly prevalent in Kikuletwa catchment. However, little is known concerning land use/cover change (LULCC) with regard to streamflow perturbation in the catchment. This study aims to detect the historical and predict future LULCC and assess their impacts on streamflow amounts using the Soil and Water Assessment Tool (SWAT) model. Supervised classification of Landsat imagery data for 1985, 2000 and 2015 years was done in ERDAS 14 Imagine software. Future prediction of LULCC was done using Module for Land Use Change Evaluation (MOLUSCE) tool, a QGIS plug-in. An accuracy ranging from 79% to 82% was obtained for all …


The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1 Dec 2019

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …


Practical Approach For Removal Of Natural Organic Matter And Defluoridation Of Maji Ya Chai River Water: Use Of Acid Pre-Treated Bone Char And Coagulants, Godfrey Mbabaye Dec 2019

Practical Approach For Removal Of Natural Organic Matter And Defluoridation Of Maji Ya Chai River Water: Use Of Acid Pre-Treated Bone Char And Coagulants, Godfrey Mbabaye

Tanzania Journal of Engineering and Technology (TJET)

The removal of natural organic matter (NOM) and fluoride from Maji ya Chai River water (MCRW) using bone char (BC) and coagulants was investigated. Fine BC particles ranging from 0.045 to 0.2 mm were used in a 1 litre half-filled container, stirred at 300 rpm for 60 min followed by addition of a commercial coagulant and allowed to settle for 24 hours to remove NOM. MCRW practicable and affordable defluoridation method for removal of NOM through defluoridation with BC pre-treated with 0.3 N HCl followed by coagulation with Poly-aluminium chloride (PACl) is proposed. Reduction of fluoride from 21 mg/L to …


Blind Algorithm Development For Peak To Average Power Ratio Reduction In Ofdm Systems Under Frequency Selective Channels, Kwame S. Ibwe Dec 2019

Blind Algorithm Development For Peak To Average Power Ratio Reduction In Ofdm Systems Under Frequency Selective Channels, Kwame S. Ibwe

Tanzania Journal of Engineering and Technology (TJET)

One major drawback of orthogonal frequency division multiplexing (OFDM) system is peak to average power ratio (PAPR). This effect causes high power amplifier (HPA) to introduce intermodulation and out of band radiation as the signal goes through, thus degrades the performance of OFDM systems. This paper proposes blind algorithms which takes advantage of signal transformation technique and signal distortion technique. Simulation results show that at complementary cumulative distribution function (CCDF) level of 10-3, the proposed algorithm achieved 3.2 dB PAPR improvement compared to discrete Fourier transform with interleaved frequency division multiple access (DFT-IFDMA) based algorithm. The bit error rate (BER) …