Applied Mathematics Commons^™

Modeling Seiche Oscillations Using Damped Vibration Differential Equations, Sharjeel Malik, Justin Della

Discovery Day - Daytona Beach

Combustion instability in liquid rocket engines is driven by coupling acoustic pressure oscillations and unsteady heat release. To achieve specific desired outcomes, small perturbations can be made to either decay or grow, depending on system dynamics and artificial parameters. Using a linearized eigenvalue framework, where eigenvalues determine growth/decay rates and frequencies, and eigenvectors describe spatial mode shapes and couplings between pressure, velocity, and heat release, a mathematical model can be derived to describe said behavior for a cross-section of the rocket engine. The Rayleigh criterion is used to identify conditions under which energy is added to oscillations, while flame transfer …

Mechanical Vibrations And Damping, Axon Deadrick, Will Standish, Tanay Agarwal

Discovery Day - Daytona Beach

Mechanical vibrations occur in many engineering systems and can be described using second-order differential equations. In this project, the motion of vibrating systems is studied using the mass–spring model. The focus is on three types of oscillations: free vibrations, dampened vibrations, and forced oscillations. Free vibration describes how a system moves when it is displaced and then released without any external force. Damped vibration includes effects such as friction or resistance that cause the motion to gradually decrease over time. Forced oscillations occur when an external force acts on the system and continuously drives the motion. This project also examines …

A Differential Equation Approach To Heat Flow In A Thin Rod, Alexandria Krol, David Cardona, Collin Petrie

Discovery Day - Daytona Beach

A Differential Equation Approach to Heat Flow in a Thin Rod examines how differential equations can be used to model and understand heat conduction in a fundamental physical system. Heat transfer in solids is a key concept in physics and engineering, particularly in systems where temperature changes over time. A thin rod provides a useful one-dimensional model for studying how heat moves through a material and how temperature varies along the rod as time passes. The primary objective is to develop a mathematical description of this process using differential equations. The analysis begins with physical principles such as conservation of …

Pseudodifferential Absorbing Boundary Conditions For Waves, Lauren Taylor

Mechanical Engineering Theses

Absorbing boundary conditions (ABCs) are required to truncate the computational domain when performing Finite Element Analyses of exterior acoustic problems where physical domain is unbounded. ABC is applied on a fictitious boundary containing the scatterer and ideally allows outgoing waves to leave without non-physical reflections. Preventing artificial reflections is essential to benefit from the accuracy of the numerical method used. Otherwise, ABC acts as a reflective surface, and artificial reflections distort the solution in the entire domain which is not recoverable by any type of refinement. Pseudodifferential ABCs were used to describe the Dirichlet-to-Neumann map which maps known boundary values …

Hybrid Solar - Coal Thermal Energy System For Industrial Process Heat At Sayona Drinks Limited In Tanzania, Santos Kihwele, Elisha D. Bitesigirwe

Tanzania Journal of Engineering and Technology (TJET)

Over the past two decades, global efforts to mitigate pollution from conventional energy sources have intensified, with coal remaining a major contributor to carbon emissions. While fossil fuels cannot be eliminated from thermal generation in manufacturing industries, particularly in middle‑income countries such as Tanzania, they continue to dominate as the primary energy source. Industries including food and beverage, paper, textile, paints, chemicals, and pharmaceuticals require substantial thermal energy for heating and drying, and typically rely on coal and natural gas.This study introduces a unique application of a parabolic trough solar thermal system with integrated thermal energy storage, specifically tailored to …

An Analytical Framework For Quantifying Urban And Community Resilience To Natural Hazards From Cell-Phone Gps-Location And Traffic-Flow Data, Georgios Chatzikyriakidis

Civil and Environmental Engineering Theses and Dissertations

Urban areas are increasingly exposed to natural hazards while accommodating a growing share of the global population, yet a consistent science-based framework for quantifying urban and community resilience remains lacking. This dissertation develops a physics-based analytical framework grounded in statistical mechanics and the quantitative theory of Brownian motion. A city is conceptualized as a complex medium in which citizens move analogously to Brownian particles within a viscoelastic environment, influenced by socioeconomic interactions and infrastructure functionality.

A central premise is that urban resilience, interpreted as engineering resilience (an outcome), can be quantified through a single metric: the mean-square displacement MSD=⟨r²(t)⟩, of …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

Assessing The Geomechanical Modelling Of Underground Reservoir For Co₂ Storage Trapping Mechanisms, Bonavian Hasiholan, Mohammed Ali Farea, Elhassan Mostafa Abdallah, Sami Abdelrahman M. Yagoub, Yasir Mukhtar

Mathematical Modelling and Numerical Simulation with Applications

Effective carbon dioxide (CO₂) storage is essential for mitigating climate change amid increasing global greenhouse gas emissions. This study investigates the influence of geomechanics on CO₂ storage performance within carbon capture and storage (CCS), focusing on structural, residual, and solubility trapping mechanisms using a fully coupled modeling framework. Two numerical models, with and without geomechanical effects, are developed to evaluate impacts on reservoir behavior, CO₂ migration, and trapping efficiency. Each mechanism is analyzed separately and within an integrated framework to assess their combined contributions. Results indicate that geomechanical coupling increases reservoir pressure, reduces CO₂ flow velocity, enhances migration control, and …

Detecting And Repairing Conflicting Constraints In Co-Trained Physics-Informed Neural Networks For Composite Curing Processes, Cooper J. Evans

Dissertations, Master's Theses and Master's Reports

Composite materials have become a critical component of modern manufacturing, especially in the automotive and aerospace industries. The curing process for these composites has been modeled using a variety of partial differential equations representing the heat transfer and composite curing kinetics. Optimizing the applied temperature profile is critical for maximizing the efficiency and capacity of composite part manufacturers. Constraints must be placed on the inputs and outputs of the model, including but not limited to, the applied temperature profile, part temperature, and final degree of cure. Conflicting sets of constraints are easy to unknowingly impose due to the highly coupled …

Microgravity-Induced Alterations In Left Atrial Hemodynamics And Thrombogenic Risk: Insights From Healthy And Atrial Fibrillation Models, Grace M. Hoeppner

Dissertations, Master's Theses and Master's Reports

Background: Microgravity exposure alters cardiovascular loading, yet its impact on left atrial flow dynamics and thrombotic risk remains poorly understood. This study investigates how spaceflight-relevant microgravity-induced changes in cardiac outflow affect left atrial hemodynamics in healthy individuals and patients with atrial fibrillation.

Methods: Patient-specific left atrial models were generated for three healthy individuals and three AF patients. Computational fluid dynamics (CFD) simulations were performed using each patient’s baseline mitral outflow waveform and two modified waveforms representing short- and long-duration post-flight cardiac loading changes derived from echocardiographic observations. Hemodynamic metrics included left atrial velocity, time averaged wall shear stress, oscillatory shear …

Analytical Study Of Transient Mixed Convective Radiative Jeffrey Fluid Flow With Diffusion–Thermo And Chemical Reaction, V. Sathiya, R. Vijayaragavan, B. Rushi Kumar

Mansoura Engineering Journal

This research examines the behavior of unsteady mixed convective radiative Jeffrey fluid flow over a permeable moving plate with a diffusion thermo effect. The study incorporates multiple factors, including aligned magnetic fields, heat generation, radiation, and chemical reactions. The behavior of Jeffrey fluid under these combined conditions is particularly relevant to the design of efficient heat exchangers, MHD generators, and cooling systems for electronic components. A regular perturbation technique was employed to solve the governing equations, yielding distributions for velocity, temperature, and species concentration. These solutions enabled the derivation of expressions for skin friction, Nusselt number, and Sherwood number. Through …

Stability Analysis Of Thermohaline Convection With A Time-Varying Shear Flow Using The Lyapunov Method, Kalin Kochnev

Honors Scholar Theses

This work applies the Lyapunov method to identify instabilities and compute the growth rate of a linear time-varying system. The linear system studied describes cold fresh water on top of hot salty water with a periodically time-varying background shear flow. A time-dependent weighting matrix is employed to construct a Lyapunov function candidate. The resulting linear matrix inequalities are discretized in time using the forward Euler method. As the number of temporal discretization points increases, the growth rate predicted by the Lyapunov method or Floquet theory, used for comparison, will converge to the same value obtained from numerical simulations. Furthermore, the …

Universal Systems Simulation Via Constraint Hypergraphs With Applications To Digital Twins, John Morris

All Dissertations

The characterization of systems encompasses a variety of modeling frameworks designed to capture specific behaviors and components of various system domains. Whatever the framework, the core elements of a system representation are the information of the system and a description of how that information is related. The relations in deterministic systems are functions, which, when composed to form executable processes, can be used to simulate system data. A declarative modeling framework is one that encodes mechanisms for preparing these simulations within the model structure, allowing an external agent to form the execution processes required for a given context. To date, …

Cnn-Based Hybrid Model For Detecting Blight Diseases In Potato Crops With Advanced Image Processing Techniques, Farian S. Ishengoma

Tanzania Journal of Engineering and Technology (TJET)

Potato production plays a vital role in global agriculture as a major food source for large populations. However, potato crops are highly susceptible to diseases, particularly Early Blight and Late Blight, which result in substantial yield losses. Timely detection and effective control of these diseases are essential for maintaining stable crop output. This study explores the integration of Convolutional Neural Networks (CNNs) and advanced image processing techniques to differentiate between diseased and healthy potato plants accurately. Two datasets comprising original and enhanced images were used to train four CNN models: InceptionV3, Xception, Densenet201, and Resnet152V2. The original images underwent background …

Optimal Location And Sizing Of Facts Devices To Improve Voltage Profiles On A 132 Kv Mwanza-Musoma-Nyamongo Transmission Line, Peter Makolo

Tanzania Journal of Engineering and Technology (TJET)

Recently, utility companies have desired to supply quality, stable and reliable power to customers, and ensure they meet the demand. Flexible AC Transmission Systems (FACTS) dynamic compensator devices such as Static Synchronous Compensator (STATCOM), Static VAr Compensator (SVC) and Unified Power Flow Controller (UPFC) are an impeccable choice, however, cost is one of the limiting factors following these technologies. In addition, using FACTS devices in the system requires a detailed steady state, dynamic and optimisation analysis to effectively meet the purpose and ensure reduced cost. This paper proposes using an optimised FACTS device to improve voltage profile, power transfer, system …

Mass Effects On Energy Transfer Paths In Nonlinear Vibrating Systems, Manal Mustafa

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation examines the role of mass in nonlinear systems, uncovering its role in enabling passive energy redistribution and robust vibration control in both idealized and real-world structures. Focusing on a strongly nonlinear two-degree-of-freedom system, it investigates how changes in mass ratio influence the dynamics of energy transfer, nonlinear normal modes (NNMs), and dissipation behavior.

A number of significant contributions are introduced in this work beginning with the introduction of the frequency-energy-peaks (FE-pks) plot, a novel tool that visualizes how energy flows through the system, revealing transient resonance orbits, internal resonance effects, and effectively capturing the different nonlinear phenomena with …

Advancing Real-World Implementation Of The Well Optimized Linear Finder (Wolf) High-Speed Atmospheric Turbulence Compensation Method, Timothy Evan Coon

Theses and Dissertations

This dissertation advances the real-world implementation of the Well Optimized Linear Finder (WOLF) method for high-speed Atmospheric Turbulence Compensation (ATC). Atmospheric turbulence introduces phase aberrations into optical wavefronts and degrades image quality in terrestrial imaging systems. Traditional phase diversity methods are computationally intensive and poorly suited to real-time operation. The WOLF method addresses these limitations through a novel, point-wise formulation of the optical transfer function (OTF) as a structured autocorrelation of the generalized pupil function (GPF). This formulation enables the estimation of phase aberrations at individual spatial coordinates with distributed computational complexity.

The research begins by developing a MATLAB-based simulation …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid

Tanzania Journal of Engineering and Technology (TJET)

There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …

Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu

Tanzania Journal of Engineering and Technology (TJET)

This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …

Assessment Of Maintenance Performance Level Of Selected Hydropower Plants In Tanzania, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

Despite significant progress in increasing electricity access to over 78%, electricity reliability in Tanzania remains a concern, with frequent power outages reported. Maintenance issues in hydropower plants have been identified as a critical factor contributing to this problem. However, the specific maintenance performance levels have not been fully assessed. This study conducts a comprehensive evaluation of the maintenance performance of four key hydropower plants: Kidatu (204 MW), Kihansi (180 MW), Mtera (80 MW), and New Pangani Falls (68 MW). Data collected from staff surveys and maintenance records between 2018 and 2022 were used in the study. Although staff demonstrated a …

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

Estimating Pedestrian Crossing Times At Scramble Crossings Via Machine Learning And Agent-Based Modeling, Sho Takami

Honors Capstones

Scramble crosswalks differ from conventional crosswalks in their ability for pedestrians to cross diagonally. This research compares the average crossing times and investigates the walking behaviors that pedestrians adopt to produce the speediest times in the two crosswalk configurations. Identification of the most efficient set of walking behaviors is done through an agent-based model, whereas producing polynomials relating crossing times to the most prominent walking behaviors is done through regression algorithms in machine learning. With the combination of these two approaches, it is revealed that pedestrians must adopt a relaxed walking style to make each crosswalk configuration efficient. Additionally, between …

Design And Performance Analysis Of Fiber Bragg Grating Temperature Sensor For Industrial Processes Sensing Applications, Paul Stone Stone Brown Macheso S.B.

Tanzania Journal of Engineering and Technology (TJET)

The Fiber Bragg Grating (FBG) sensor has become a widespread sensing device because of its small size, passive design, immunity to electromagnetic interference, and direct ability to measure physical properties like temperature and strain. Recently, femtosecond infrared laser processing and regeneration techniques have resulted in the development of stable high-temperature gratings, which are a powerful tool in smart factories, an aspect of the fourth Industrial Revolution (4IR), and show promise for application in harsh environments like high pressure, high temperature, or ionizing radiation. The development of stable high-temperature gratings that can withstand harsh environmental factors like high temperatures, pressures, and …

Effect Of Dual-Fuelled Cng And Gasoline On Spark Ignition Engine Performance And Emissions Behaviors At Different Loads, Medhat Elkelawy Prof. Dr, Eng., M.M. Bassuoni Prof. Dr., Hagar Alm-Eldin Bastawissi, Saied I. Haiba Eng.

Journal of Engineering Research

Engine emissions are one of numerous factors that have detrimentally affected the environment, such as global warming, which is the result of growing exhaust gases, practically carbon dioxide (CO2). These emissions have substantially influenced researchers to develop strategic initiatives to minimize the carbon contents of fuels. The purpose of this research is to investigate the characteristics of internal combustion (SI) engines fueled by gasoline and compressed natural gas (CNG) blends. The experiments are performed using a HONDA 4-stroke, single-cylinder, and air-cooled SI engine. Five CNG concentrations are evaluated, the concentrations range from 0.5 to 2.5 L/min with a 0.5 L/min …

Estimating Pedestrian Crossing Times At Scramble Crossings Via Machine Learning And Agent-Based Modeling, Sho Takami

CURE Proceedings

Scramble crosswalks differ from conventional crosswalks in their ability for pedestrians to cross diagonally. This research compares the average crossing times and investigates the walking behaviors that pedestrians adopt to produce the speediest times in the two crosswalk configurations. Identification of the most efficient set of walking behaviors is done through an agent-based model, whereas producing polynomials relating crossing times to the most prominent walking behaviors is done through regression algorithms in machine learning. With the combination of these two approaches, it is revealed that pedestrians must adopt a relaxed walking style to make each crosswalk configuration efficient. Additionally, between …

Horizontal Infiltration Of Water Through Porous Snow As A Gravity Current, Anthony Cheng

Dartmouth College Master’s Theses

On the surface of the Greenland ice sheet or around the margins of the Antarctic ice shelf, water infiltrates porous ice. It is important to understand this infiltration process since water populating the pore space of ice directly impacts the density, porosity, and wetness of ice. These properties influence the mechanics and tensile strength of ice, as greater amounts of infiltration result in faster or more widespread deformation events, which may lead to adverse climatic effects such as sea level rise and ocean current disruption. While studies have considered the thermodynamics and fluid mechanics of water vertically percolating through snow …

Hitch Cart “Landing Gear”, Rebekah White, Jose Raygoza, Randy Hernandez, Brandon Leon

Mechanical Engineering

This report aims to allow our sponsor, to review our design process of the Hitch Cart Landing Gear Prototype. In the design overview section of this report, we discuss the primary design modifications we made to the wheel mechanism of the existing hitch cart prototype, including the addition of the ACME screws and the folding brackets. This allows our sponsor to see the intended improvements made to the past prototype and understand the primary goal of our project. Then, in the implementation section, we cover the entire manufacturing process to allow our sponsor to understand what manufacturing steps must be …

Review Of Wood Drying Technologies, Mohamed Salah Elmetwaly, Lotfy Hassan Rabie Saker, Mohamed Sameh Salem

Journal of Engineering Research

Abstract- This article provides a comprehensive review of drying optimization in data centers by examining the limitations of drying methods and discussing advances proposed by scientists through whom we can provide a comparison between different drying systems with an emphasis on improving energy efficiency and thermal performance. Wood drying under atmospheric pressure has many advantages, including the ability to dry at lower temperatures (by reducing the likelihood of some drying defects), significantly reduced drying times, color preservation, increased energy efficiency, better control of volatile organic compound emissions, and the ability to dry very large cross sections. Previous studies have achieved …

Performance Studies Of An Axial Flow Waterjet Pump Using An Unsteady Reynolds-Averaged Navier-Stokes Model, Stephen E. Monroe, Junfeng Wang, Chunlei Liang

Northeast Journal of Complex Systems (NEJCS)

In this study, an Unsteady Reynolds-Averaged Navier-Stokes (URANS) model is demonstrated its suitability for studying the flow and performance of open marine propellers and waterjet pumps. First, the accuracy of the URANS model is validated by studying turbulent flow past counter-rotating propellers (CRPs). Specifically, experimental data from Miller (1976) is employed for comparison against the URANS results. Subsequently, URANS is used to study the flow and performance of an Office of Naval Research (ONR) axial flow waterjet pump (AxWJ-2). Due to the large number of degrees of freedom for both simulations, parallel computations over 80 cores are performed. For the …