Applied Mathematics Commons^™

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

A Fast Algorithm For The Inversion Of Quasiseparable Vandermonde-Like Matrices, Sirani M. Perera, Grigory Bonik, Vadim Olshevsky

Publications

The results on Vandermonde-like matrices were introduced as a generalization of polynomial Vandermonde matrices, and the displacement structure of these matrices was used to derive an inversion formula. In this paper we first present a fast Gaussian elimination algorithm for the polynomial Vandermonde-like matrices. Later we use the said algorithm to derive fast inversion algorithms for quasiseparable, semiseparable and well-free Vandermonde-like matrices having O(n2) complexity. To do so we identify structures of displacement operators in terms of generators and the recurrence relations(2-term and 3-term) between the columns of the basis transformation matrices for quasiseparable, semiseparable and well-free polynomials. Finally we …

Evolution Of Perturbations In Flow Field Mechanics, Samantha R. Bell, David Forliti, Nils Sedano, Kriss Vanderhyde

STAR Program Research Presentations

This project explores the stability analysis of a given flow field. Specifically, where the peak disturbance occurs in a flow as this is the disturbance that is most likely to occur. In rocket combustion, it is important to understand where the maximum disturbance occurs so that the mixing of fuel can be stabilized. The instabilities are the results of frequencies in the area surrounding the flow field. The linear stability governing equations are employed to better understand the disturbance. The governing equations for continuity and momentum in the x and y directions are used to form an equation for the …

A Mathematical Framework For Unmanned Aerial Vehicle Obstacle Avoidance, Sorathan Chaturapruek

HMC Senior Theses

The obstacle avoidance navigation problem for Unmanned Aerial Vehicles (UAVs) is a very challenging problem. It lies at the intersection of many fields such as probability, differential geometry, optimal control, and robotics. We build a mathematical framework to solve this problem for quadrotors using both a theoretical approach through a Hamiltonian system and a machine learning approach that learns from human sub-experts' multiple demonstrations in obstacle avoidance. Prior research on the machine learning approach uses an algorithm that does not incorporate geometry. We have developed tools to solve and test the obstacle avoidance problem through mathematics.

Data Mining Based Hybridization Of Meta-Raps, Fatemah Al-Duoli, Ghaith Rabadi

Engineering Management & Systems Engineering Faculty Publications

Though metaheuristics have been frequently employed to improve the performance of data mining algorithms, the opposite is not true. This paper discusses the process of employing a data mining algorithm to improve the performance of a metaheuristic algorithm. The targeted algorithms to be hybridized are the Meta-heuristic for Randomized Priority Search (Meta-RaPS) and an algorithm used to create an Inductive Decision Tree. This hybridization focuses on using a decision tree to perform on-line tuning of the parameters in Meta-RaPS. The process makes use of the information collected during the iterative construction and improvement phases Meta-RaPS performs. The data mining algorithm …

Predicting Propylene Loss With Inferential Model Development Using Design Of Experiments (Doe) And Historical Data, Jeffrey Allen Wheeler

Open Access Theses & Dissertations

Inferential models are a highly researched topic as the science of digital automation becomes more prevalent as information is in abundance. Welldeveloped inferred models can augment the use of analyzers in steady state processing and highly correlated ones can even replace online analytics. The use of design of experiments (DOE) inferred models with historical process data and a rigorous plant simulator can reduce the case study duration while achieving a high degree of accuracy. This paper uses surface response and full factorial models as the first step in model development, and then uses actual historical plant data to create a …

Thermolysis And Kinetics Of Scrap Tyre And Bagasse For Energy Utilization, Petro Ndalila

Tanzania Journal of Engineering and Technology (TJET)

The increase of energy demand has brought concern to find alternative fuel that will at least sustain the requirement. Bagasse and scrap tyre are waste generated in our industrial activities, which can be used in energy production to subsidize the demand. This paper, aim to study the decomposition behaviour and kinetics of biomass (bagasse) and scrap tyre as preliminary stage of fuel sample analysis to be considered for energy production in gasification/combustion or pyrolysis facilities. The behaviour demonstrated with thermogravimetric analyzer (TGA), shows that all samples have high volatile amount release, 84.21% for bagasse and 85.08% for scrap tyre, which …

Optimising The Performance Of Roundabouts In Dar Es Salaam City, David Mfinanga

Tanzania Journal of Engineering and Technology (TJET)

Intersections are one of the major bottlenecks that aggravate congestion in road networks; effective control of which is an important strategy in improving traffic flow. While developing countries have found it hard to adopt sophisticated means of intersection control, they have also not optimised the performance of roundabouts. This paper reviews the performance of roundabouts, which have become increasingly popular in recent years, as simple and low cost forms of intersection control. The performance of three major roundabouts in Dar es Salaam has been analysed and results show that roundabouts can accommodate high traffic volumes without causing excessive delays. The …

Analysis Of Power Efficiency Of A Direct-Driven Locally Fabricated Permanent Magnet Ac Generator For Small-Scale Wind Power Applications In Tanzania, Mussa Iddi Mgwatu Dr.

Tanzania Journal of Engineering and Technology (TJET)

The use of direct-driven permanent magnet alternating current (AC) generators offers the opportunity to reduced costs and increased system efficiency. This type of generator could be the best alternative for rural population whom are not connected to the national grid. To improve the design and efficiency of locally fabricated generators, it is imperative to characterize both their mechanical and electrical parameters. This paper presents the analysis of power efficiency of the synchronous permanent AC generator locally fabricated in Tanzania. In this case, load resistance and rotational speed are characterized using designed experiment. The output current and voltage of the generator …

A Study On The Integration Of A Novel Absorption Chiller Into A Microscale Combined Cooling, Heating, And Power (Micro-Cchp) System, Scott J. Richard

LSU New Orleans Theses and Dissertations

This study explores the application of micro-CCHP systems that utilize a 30 kW gas microturbine and an absorption chiller. Engineering Equation Solver (EES) is used to model a novel single-effect and double-effect water-lithium bromide absorption chiller that integrates the heat recovery unit and cooling tower of a conventional CCHP system into the chiller’s design, reducing the cost and footprint of the system. The results of the EES model are used to perform heat and material balances for the micro-CCHP systems employing the novel integrated chillers, and energy budgets for these systems are developed. While the thermal performance of existing CCHP …

Extension Of A High-Order Petrov-Galerkin Implementation Applied To Non-Radiating And Radar Cross Section Geometries, William L. Shoemake

Masters Theses and Doctoral Dissertations

Capabilities of a high-order Petrov-Galerkin solver are expanded to include N-port systems. Tait-Bryan angles are employed to launch electro-magnetic waves in arbitrary directions allowing off axis ports to be driven. The transverse-electric (TE) formulation is added allowing waveguide geometries to be driven directly. A grid convergence study is performed on a coax-driven waveguide system. Physical data are matched to a hybrid-T junction (magic-T) electromagnetic waveguide structure to verify the TE driving formulation along with the Tait-Bryan angles and modified post-processing routines. A simple sphere case is used to exercise the radar cross section (RCS) routines and to examine the benefits …

Validation Of Interpolative Interfaces For Rotorcraft Applications, Adam L. Cofer

Masters Theses and Doctoral Dissertations

The study uses computational methods to simulate fluid flow on the NASA ROBIN helicopter model and on a simplified rotor geometry previously tested at Mississippi State. The ROBIN model and the rotor are run using an unstructured grid. Results from the Tenasi flow solver are compared against both simulated and wind tunnel data. Tenasi is an unstructured, Reynolds Averaged Navier-Stokes (RANS) solver developed at the SimCenter: National Center for Computational Engineering, located at the University of Tennessee at Chattanooga. Steady-state results for the isolated ROBIN fuselage and unsteady results for both fuselage and rotor systems are computed. In the unsteady …

Stabilized Finite Elements For Compressible Turbulent Navier-Stokes, Jon Taylor Erwin

Masters Theses and Doctoral Dissertations

In this research a stabilized finite element approach is utilized in the development of a high-order flow solver for compressible turbulent flows. The Reynolds averaged Navier-Stokes (RANS) equations and modified Spalart-Almaras (SA) turbulence model are discretized using the streamline/upwind Petrov-Galerkin (SUPG) scheme. A fully implicit methodology is used to obtain steady state solutions or to drive unsteady problems at each time step. Order of accuracy is assessed for inviscid and viscous flows in two and three dimensions via the method of manufactured solutions. Proper treatment of curved surface geometries is of vital importance in high-order methods, especially when high aspect …

2-D Cfd Design Of The Cross-Sectional Shape Of Arterial Stents, Kristen Karman

Masters Theses and Doctoral Dissertations

An approach for desigining arterial stents to maximize wall shear stress is presented. A cost equation to maximize wall shear stress is derived and then inverted into a minimization problem for the optimizer. A 2-D mixed-element finite-volume scheme for solving the compressible Navier-Stokes equations is implemented. A paramaterization of the cross- sectional shape of the stent wire using Hicks-Henne functions is described. The strategies used in the commercial optimization software, DAKOTA, to minimize the cost equation are described. The solver is validated using well known fluid flow test cases and is shown to match other published computed results for bloodflow …

Modeling And Control Of Nanoparticle Bloodstream Concentration For Cancer Therapies, Scarlett S. Bracey

Doctoral Dissertations

Currently, the most commonly used treatments for cancerous tumors (chemotherapy, radiation, etc.) have almost no method of monitoring the administration of the treatment for adverse effects in real time. Without any real time feedback or control, treatment becomes a "guess and check" method with no way of predicting the effects of the drugs based on the actual bioavailability to the patient's body. One particular drug may be effective for one patient, yet provide no benefit to another. Doctors and scientists do not routinely attempt to quantifiably explain this discrepancy. In this work, mathematical modeling and analysis techniques are joined together …

Characterization Of The Drilling Via The Vibration Augmenter Of Rotary-Drills And Sound Signal Processing Of Impacted Pipe As A Potential Water Height Assessment Tool, Nicholas Morris

STAR Program Research Presentations

The focus of the internship has been on two topics: a) Characterize the drilling performance of a novel percussive augmenter – this drill was developed by the JPL’s Advanced Technologies Group and its performance was characterized; and b) Examine the feasibility of striking a pipe as a means of assessing the water height inside the pipe. The purpose of this investigation is to examine the possibility of using a simple method of applying impacts to a pipe wall and determining the water height from the sonic characteristic differences including damping, resonance frequencies, etc. Due to multiple variables that are relevant …

Accuracy Analysis Of Parallel Method Based On Non-Overlapping Domain Decomposition Method, Moonho Tak, Yooseob Song, Hye-Kwan Jeon, Taehyo Park

Civil Engineering Faculty Publications

In this paper, an accuracy analysis of parallel method based on non-overlapping domain decomposition method is carried out. In this approach, proposed by Tak et al.(2013), the decomposed subdomains do not overlap each other and the connection between adjacent subdomains is determined via simple connective finite element named interfacial element. This approach has two main advantages. The first is that a direct method such as gauss elimination is available even in a singular problem because the singular stiffness matrix from floating domain can be converted to invertible matrix by assembling the interfacial element. The second is that computational time and …

Juxtaposing Nasa’S Aeronet Aod With Carb Pm Data Over The San Joaquin Valley To Facilitate Multi-Angle Imaging Spectroradiometer (Misr) Pm Pollution Research, John Kanemoto

STAR Program Research Presentations

Airborne particulate matter (PM) has been shown to increase the risk for asthma, chronic bronchitis, cardiopulmonary complications, and respiratory cell membrane damage/infection/leakage. PM levels are currently analyzed from two perspectives: stationary land-based monitoring (LBM) sites and total Aerosol Optical Depth (AOD) atmospheric column measurements. Both perspectives often leave miles of space between measuring locations and will have a continually increasing cost from introducing/maintaining sites. The Multi-angle Imaging SpectroRadiometer (MISR) satellite team hopes to begin investigating/archiving PM levels comprehensively via inputting MISR AOD measurements into a function/model which predicts the amount of ground level PM.

In the future, multivariable spatial correlations …

Linear Programming Algorithm With Mixed Real-Integer Variables In Matlab Environments, Gelareh Bakhtyar

Civil & Environmental Engineering Theses & Dissertations

Efficient numerical procedures for solving general Linear Programming (LP) problems with mixed real-integer variables are developed in this work. The proposed algorithms employ the revised dual simplex with Branch and Bound (B&B) algorithms, with special procedures for limited search of subsequent branches. Computational time can be significantly reduced by incorporating the updated inverse formulas into the developed procedures. Both generic LP problems and deterministic pavement maintenance and rehabilitation (M&R) problems are used in this study to vaiidate the developed procedures. Medium to large-scale examples ( 11 pavement M&R) presented in this work have demonstrated that the developed numerical procedures consistently …

Current Barriers To Successful Implementation Of Fist Principles, Brandon Keller, Joseph R. Wirthlin

Faculty Publications

The Fast, Inexpensive, Simple, and Tiny (FIST) framework proposes a broad set of organizational values, but provides limited guidance on practical implementation. Implementing FIST principles requires clarifying the definitions of “fast,” “inexpensive,” and “simple,” recognizing where FIST does and does not apply. Additionally, a subset of the FIST heuristics was expanded upon to increase their usefulness for practitioners. The primary research findings are that FIST principles are less conducive for highly complex or novel systems, immature technologies, future needs, acquisitions in early development phases, or when performance is the foremost value. FIST principles were also found to be constrained by …

Multi-Objective Preliminary Design Optimization Of Planing Craft Using Differential Evolution And Artificial Networks, Robert Eugene Weidman

Mechanical & Aerospace Engineering Theses & Dissertations

The differential evolution (DE) algorithm is an evolutionary algorithm that has been utilized as a metaheuristic optimizer in the last few years. A recently developed multi-objective version of DE is utilized in this research in order to optimize the preliminary design of planing craft. The craft performance is evaluated using the planing hull preliminary design software PHAST. The optimization problem objectives are the craft acquisition cost and the overall measure of effectiveness; the latter comprises various performance aspects: ride quality, transportability, payload, and mobility. Static stability and operating constraints are also considered. Each of the aforementioned four measures of effectiveness …

Open Source Kiswahili Spell Checker (Sw-Tz), Hashim Twaakyondo

Tanzania Journal of Engineering and Technology (TJET)

Different English software products are localized into many native languages spoken around the world, the most popular software products localized so far are word processing software and web browsers. The effort has begun to localize these software products in Kiswahili language which is widely spoken in Tanzania, East and Central Africa. Kiswahili is an official language of Tanzania, and is a national language in Uganda and Kenya. To make these software products useful to Kiswahili speaking community particularly in Tanzania a new Kiswahili spell checker has been developed and, it uses most of the Kiswahili words spoken in Tanzania and …

2d Autocad Geometric Data Extraction And Post Processing For Numerical Control, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a method of extracting 2D geometric data from AutoCAD drawing and post processing for Numerical Control (NC) is presented. Geometric data already available in the Drawing Interchange Files (DXF) can be utilized to accurately and economically prepare part programs for controlling NC/CNC machine tools. AutoCAD, being general purpose software, stores its geometric data in a form that cannot be directly applied for automatic generation of Numerical Control (NC) codes. The way around the discrepancy between the structure of a drawing database (DXF files) and the information requirement for part programming is addressed in this work. NC programming …

Problems And Prospects Of Hydraulic Modelling For Environmental Flows Assessment Studies In East Africa, Preksedis Ndomba

Tanzania Journal of Engineering and Technology (TJET)

The objective of this paper is to document the problems and prospects of hydraulic modelling for Environmental Flows Assessment (EFA) studies based on selected case studies. Most of studies in East Africa use Holistic methodologies. An ideal data set for defining river hydraulics for most of these methods would be six data points of stage measurements over a good distribution of discharges, the stage of zero discharge and some flood-related data. Besides, in East African region EFA studies suffer from data scarcity (i.e., poorly gauged sites) and limited expertise and funding. The hydraulics studies conducted by the authors entailed desktop …

Dispersive Waves In Microstructured Solids, A. Berezovski, J. Engelbrecht, A. Salupere, K. Tamm, T. Peets, Mihhail Berezovski

Publications

The wave motion in micromorphic microstructured solids is studied. The mathematical model is based on ideas of Mindlin and governing equations are derived by making use of the Euler–Lagrange formalism. The same result is obtained by means of the internal variables approach. Actually such a model describes internal fields in microstructured solids under external loading and the interaction of these fields results in various physical effects. The emphasis of the paper is on dispersion analysis and wave profiles generated by initial or boundary conditions in a one-dimensional case.

Stress Analysis Of Ramberg-Osgood And Hollomon 1-D Axial Rods, Ronald J. Giardina Jr

LSU New Orleans Theses and Dissertations

In this paper we present novel analytic and finite element solutions to 1-D straight rods made of Ramberg-Osgood and Hollomon type materials. These material models are studied because they are a more accurate representation of the material properties of certain metals used often in manufacturing than the simpler composite linear types of stress/strain models. Here, various types of loads are considered and solutions are compared against some linear models. It is shown that the nonlinear models do have manageable solutions, which produce important differences in the results - attributes which suggest that these models should take a more prominent place …

Cooking Up The Optimal Baking Algorithm, Tony Burand, Michael Tetzlaff, Jacob Smith

Math and Computer Science Student Works

Many conventional rectangular baking pans have a problem in that they bake the corners of the batter faster than the rest of the pan. Circular baking pans eliminate this problem, but take up more space in the oven. We propose a solution that given weights for baking consistency and space efficiency based on the importance of each will provide the optimal baking pan shape. We have come up with an algorithm for sorting the pans of area A effectively and formed a model that describes the heat flow into the pan as well as the baking mix itself. The model …

Cooking Up The Optimal Baking Algorithm, Tony Burand, Michael Tetzlaff, Jacob Smith

Colloquy Undergraduate Research Journal

Many conventional rectangular baking pans have a problem in that they bake the corners of the batter faster than the rest of the pan. Circular baking pans eliminate this problem, but take up more space in the oven. We propose a solution that given weights for baking consistency and space efficiency based on the importance of each will provide the optimal baking pan shape. We have come up with an algorithm for sorting the pans of area A effectively and formed a model that describes the heat flow into the pan as well as the baking mix itself. The model …

Supersonic Turbine Cascade Studies Using Computational Fluid Dynamics And Water Table Experiments, Shelby E. Nelson

Honors College Theses

Design engineers use a variety of tools to perform calculations and to aid in the design process. For example, engineers designing gas turbines, specifically the aerodynamicists, use a combination of hand calculations, experimental data, and complex numerical codes to simulate air flow around each blade. Aerodynamicists designing gas turbines must predict the locations of the shocks to locate inefficiencies in the flow. In this thesis, three methods of calculating the shock angles are compared: analytical, experimental, and computational. Three different airfoil shapes are tested: a rectangular flat plate, a supersonic diamond, and a turbine airfoil. Cascade tests of the airfoil …

Influence Of Microstructure On Thermoelastic Wave Propagation, Arkadi Berezovski, Mihhail Berezovski

Publications

Numerical simulations of the thermoelastic response of a microstructured material on a thermal loading are performed in the one-dimensional setting to examine the influence of temperature gradient effects at the microstructure level predicted by the thermoelastic description of microstructured solids (Berezovski et al. in J. Therm. Stress. 34:413–430, 2011). The system of equations consisting of a hyperbolic equation of motion, a parabolic macroscopic heat conduction equation, and a hyperbolic evolution equation for the microtemperature is solved by a finite-volume numerical scheme. Effects of microtemperature gradients exhibit themselves on the macrolevel due to the coupling of equations of the macromotion …