Applied Mathematics Commons^™

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Trajectory Analysis For Driving Safety Quantification, Michael I. Chang

UNLV Theses, Dissertations, Professional Papers, and Capstones

In order to evaluate the efficacy of the skid recovery exercise in the Driver’s Edge teenage driving program, a process is established to determine the trajectories of vehicles from recorded videos, compare them in terms of similarity through dynamic time warping (DTW), and then analyze the similarity measurements to assess whether the program has a significant effect on driving ability by repeated measures analysis of variance (rANOVA). The video is analyzed by Harris corner detection and Lucas-Kanade optical flow method to ascertain the vehicle trajectories. A homography is then estimated to translate coordinates from video into real-world. The instructor and …

Mathematical Modeling: Finite Element Analysis And Computations Arising In Fluid Dynamics And Biological Applications, Jorge Reyes

UNLV Theses, Dissertations, Professional Papers, and Capstones

It is often the case when attempting to capture real word phenomena that the resulting mathematical model is too difficult and even not feasible to be solved analytically. As a result, a computational approach is required and there exists many different methods to numerically solve models described by systems of partial differential equations. The Finite Element Method is one of them and it was pursued herein.This dissertation focuses on the finite element analysis and corresponding numerical computations of several different models. The first part consists of a study on two different fluid flow models: the main governing model of fluid …

Analysis And Application Of Finite Element And High-Order Finite Difference Methods For Maxwell’S Equations In Complex Media, Li Zhu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Perfectly Matched Layer (PML) technique is an effective tool introduced by B´erenger [13] to reduce the unbounded wave propagation problem to a bounded domain problem. This dissertation focuses on two different PML models and their applications to wave propagation problems with Maxwell’s equation in complex media. We investigate these models using two popular numerical methods: the Finite Difference Method (FDM) in Chapters 2 and 3, and the Finite Element Method (FEM) in Chapters 4 and 5.In Chapter 2, we focus on analyzing the stability of a PML developed by B’ecache et al. [10] for simulating wave propagation in the …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Evolution Of Coronal Magnetic Field Parameters During X5.4 Solar Flare, Seth H. Garland, Benjamin F. Akers, Vasyl B. Yurchyshyn, Robert D. Loper, Daniel J. Emmons

Faculty Publications

The coronal magnetic field over NOAA Active Region 11,429 during a X5.4 solar flare on 7 March 2012 is modeled using optimization based Non-Linear Force-Free Field extrapolation. Specifically, 3D magnetic fields were modeled for 11 timesteps using the 12-min cadence Solar Dynamics Observatory (SDO) Helioseismic and Magnetic Imager photospheric vector magnetic field data, spanning a time period of 1 hour before through 1 hour after the start of the flare. Using the modeled coronal magnetic field data, seven different magnetic field parameters were calculated for 3 separate regions: areas with surface |Bz| ≥ 300 G, areas of flare brightening seen …

A Mathematical Algorithm Approach For Estimating Water-Based Paint Requirements For A Given Wall, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

The research aimed to improve the accuracy of estimating water based paint requirements for a given wall using mathematical algorithms. The approach used in this study included a survey and document review to obtain details concerning paint. The study focused on water-based paints, including silk, weather guard, emulsion hi-cover and polyvinyl acetate (PVA) roof paint used in Tanzania’s building and construction industry. Data collected from the field study were analysed systematically. It was observed that there is a high level of familiarity in improving the accuracy of estimation of the required water-based paints, namely silk, weather guard, emulsion hi-cover and …

Session 12: Analysis Of State And Parameter Estimation Techniques Using Dynamic Perturbation Signals, Timothy M. Hansen

SDSU Data Science Symposium

The trend in electric power systems is the displacement of traditional synchronous generation (e.g., coal, natural gas) with renewable energy resources (e.g., wind, solar photovoltaic) and battery energy storage. These energy resources require power electronic converters (PECs) to interconnect to the grid and have different response characteristics and dynamic stability issues compared to conventional synchronous generators. As a result, there is a need for validated models to study and mitigate PEC-based stability issues, especially for converter dominated power systems (e.g., island power systems, remote microgrids).

This presentation will introduce methods related to dynamic state and parameter estimation via the design …

A Path Planning Framework For Multi-Agent Robotic Systems Based On Multivariate Skew-Normal Distributions, Peter Estephan

Theses, Dissertations and Capstones

This thesis presents a path planning framework for a very-large-scale robotic (VLSR) system in an known obstacle environment, where the time-varying distributions of agents are applied to represent the multi-agent robotic system (MARS). A novel family of the multivariate skew-normal (MVSN) distributions is proposed based on the Bernoulli random field (BRF) referred to as the Bernoulli-random-field based skew-normal (BRF-SN) distribution. The proposed distributions are applied to model the agents’ distributions in an obstacle-deployed environment, where the obstacle effect is represented by a skew function and separated from the no-obstacle agents’ distributions. First, the obstacle layout is represented by a Hilbert …

Quantum Computing And Its Applications In Healthcare, Vu Giang

OUR Journal: ODU Undergraduate Research Journal

This paper serves as a review of the state of quantum computing and its application in healthcare. The various avenues for how quantum computing can be applied to healthcare is discussed here along with the conversation about the limitations of the technology. With more and more efforts put into the development of these computers, its future is promising with the endeavors of furthering healthcare and various other industries.

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Bifurcation Levels Of The Integral Manifolds Of The Newtonian N-Body Problem, Hannah G. Havel

CURE Proceedings

The N-body problem, first proposed by Isaac Newton, is a field of study in mathematics and physics that involves predicting the motion of particles moving under their mutual gravitational attraction. It has significance to many areas of science, including physics and computer science, and is crucial in understanding how the universe works. In fact, it was a primary motivation for Newton's development of calculus. An important application of the N-body problem is within celestial mechanics and involves how planets and other celestial bodies move with mutual gravitational attraction. It is important in developing how satellites behave in space using complicated …

Using Modflow To Assess Groundwater Storage Enhancement Via A Floodplain Infiltration Basin, Lindsay Henning

All Master's Theses

Delaying groundwater discharge into rivers until it is critically needed during baseflow conditions provides promise for lowering elevated stream temperatures and improving habitat for aquatic species. Increasing groundwater storage may accomplish this in locations where excess spring runoff can be captured and allowed to infiltrate into the subsurface for later beneficial use, a process known as Managed Aquifer Recharge (MAR). Here, MAR via an infiltration basin is considered at a site along the Teanaway River in central Washington State. The effects of simulated ephemeral ponds of sizes varying from 554 m³ to 2430 m³ (0.449 acre-feet to 1.97 …

Swarm Intelligence For Solving Some Nonlinear Differential Equations, Ahmed Elzaghal, Mohammed Mohammed Elgamal, Ahmed H. Eltanboly

Mansoura Engineering Journal

The Euler method is a well-known numerical technique employed for solving initial value problems of ordinary differential equations. The solution obtained through Euler's method is subject to significant inaccuracies, which tend to amplify with each successive iteration. The Particle Swarm Optimization (PSO) algorithm is a highly effective method for finding optimal solutions to both linear and nonlinear optimization problems. In this particular investigation, the PSO technique was utilized to solve initial value problems associated with ordinary differential equations. The Euler method, on the other hand, employs equidistant grid points to approximate solutions, which can result in significant errors and a …

Study Of Bounds For Effective Moduli Of Polycrystals And Composites Using Variational Principle For Probabilistic Measures, Md. Tofiqul Islam

Wayne State University Dissertations

Tensors that are invariant with respect to subgroups of 3D group of rotations were constructed first by Lokhin and Sedov (J. Appl. Math. Mech. (PMM), 1963, 27, 597-629). In this paper we do one more step and derive formulas for the elastic modulus tensors for all symmetry groups from the Lokhin-Sedov results. The tensor basis obtained in this way has an advantage of being built upon the same tensors that are used in construction of nonlinear tensor functions. One consequence of the formulas derived is that the number of types of anisotropic elastic behaviors is ten. There is a long- …

Novel Bayesian Neural Networks And Uncertainty Quantification Of Computational Mechanics Models, Ponkrshnan Thiagarajan

Dissertations, Master's Theses and Master's Reports

Computational and data-driven models suffer from a wide range of uncertainties that impact the reliability of such models. Given the exponential proliferation of machine learning models in real-world systems, establishing a degree of confidence in their predictions becomes paramount. Reliability in predictions takes on utmost significance in domains such as autonomous driving, medical image analysis, etc., where human lives are involved, and inaccuracies in predictions could lead to disastrous outcomes. For these reasons, comprehending and quantifying uncertainties in computational and data-driven models is of utmost importance. A number of techniques have been developed to quantify uncertainties in machine learning models. …

Analysis Of Localization Algorithms For Wireless Sensor Networks Using Binary Data, Alexander Joseph Hart

Graduate Research Theses & Dissertations

The detection, localization, and tracking of environmental and physical conditions can be accomplished using wireless sensor networks (WSNs). Recent advancements in sensors, processors, and wireless communications have improved the quality and acquisition speed of data in WSNs. However, the data gathered by a WSN is inherently random due to component and environmental variations. Thus, statistical signal processing algorithms are needed to analyze the random data in a robust way. Though many algorithms for the analysis of random data are established and available, they are problem-specific and must be adapted to the application. This thesis provides an analysis of established localization …

Moment-Based Reinforcement Learning For Ensemble Control, Yao-Chi Yu, Vignesh Narayanan, Jr-Shin Li

Publications

Problems involving controlling the collective behavior of a population of structurally similar dynamical systems, the so-called ensemble control, arise in diverse emerging applications and pose a grand challenge in systems science and control engineering. Owing to the severely under-actuated nature and the difficulty of placing large-scale sensor networks, ensemble systems are limited to being actuated and monitored at the population level. Moreover, mathematical models describing the dynamics of ensemble systems are often elusive. Therefore, it is essential to design broadcast controls that excite the entire population in such a way that the heterogeneity in system dynamics are robustly compensated. In …

Enhancing Control Room Operator Decision Making: An Application Of Dynamic Influence Diagrams In Formaldehyde Manufacturing, Joseph Mietkiewicz, Anders L. Madsen

Articles

Intoday’s rapidly evolving industrial landscape, control room operators must grapple with an ever-growing array of tasks and respon sibilities. One major challenge facing these operators is the potential for task overload, which can lead to decision fatigue and increased reliance on cognitive biases. To address this issue, we propose the use of dynamic influence diagrams (DID) as the core of our decision support system. By monitoring the process over time and identifying anomalies, DIDs can recommend the most effective course of action based on a probabilistic assessment of future outcomes. Instead of letting the operator choose or search for the …

Development Of An Operational Satellite-Based Flood Monitoring Model For Tanzania, Andrew Kimati

Tanzania Journal of Engineering and Technology (TJET)

Timely information during water related disasters is of utmost importance for flood preparedness and risk reduction. However, the conventional ground-based photographic monitoring of flooded areas is an expensive and time-consuming exercise. Satellite remote sensing is a quick and affordable approach that can be used for concurrent floods detection at different scales. This is important as it facilitates timely information for emergency response to disaster management departments, even in scarcely instrumented catchments. This study presents a novel approach for flood tracking using satellite image remote sensing science to map flood affected areas immediately after occurrence of rainfall events. An open-source water …

Filtering Effect On Rssi-Based Indoor Localization Methods, Kwame S. Ibwe

Tanzania Journal of Engineering and Technology (TJET)

Indoor positioning systems are used to locate and track objects in an indoor environment. Distance estimation is done using received signal strength indicator (RSSI) of radio frequency signals. However, RSSI is prone to noise and interference which can greatly affect the accuracy performance of the system. In this paper Internet of Things (IoT) technologies like low energy Bluetooth (BLE), WiFi, LoRaWAN and ZigBee are used to obtain indoor positioning. Adopting the existing trilateration and positioning algorithms, the Kalman, Fast Fourier Transform (FFT) and Particle filtering methods are employed to denoise the received RSSI signals to improve positioning accuracy. Experimental results …

A Genetic Algorithm Approach To Optimal Sizing And Placement Of Distributed Generation On Nigerian Radial Feeders, Adelowo Balogun

Tanzania Journal of Engineering and Technology (TJET)

Mitigating power loss and voltage profile problems on radial distribution networks has been a major challenge to distribution system operators. While deployment of distributed generation, as compensators, has made a suitable solution option, optimum placement and sizing of the compensators has been a concern and it has thus been receiving great attention. Meta-heuristic algorithms have been found efficacious in this respect, yet the use of the algorithms in addressing problems of radial feeders is still comparatively low in Nigeria where analytical and numerical programming methods are common. Hence; the use of genetic algorithm to site and size distributed generator for …

Characteristics Of Extreme Precipitation And Their Effect On Bean Yield In Rwanda, Paul Ts Limbu Sr

Tanzania Journal of Engineering and Technology (TJET)

This study examines the characteristics of extreme precipitation and its effect on bean yield in Rwanda from 1981 to 2017. Over the study area, two rainy seasons, March to May (MAM) and September to December (SOND), account for approximately 80% of total rainfall. The spatial distribution of rainfall over Rwanda revealed that the first three EOF modes of MAM rainfall vary by 72.72 percent over the study period, while the first three EOF modes of SOND rainfall vary by 57.48 percent. The spatial analysis of extreme precipitation reveals that during wet years, the majority of the country's western regions receive …

On Variants Of Sliding And Frank-Wolfe Type Methods And Their Applications In Video Co-Localization, Seyed Hamid Nazari

All Dissertations

In this dissertation, our main focus is to design and analyze first-order methods for computing approximate solutions to convex, smooth optimization problems over certain feasible sets. Specifically, our goal in this dissertation is to explore some variants of sliding and Frank-Wolfe (FW) type algorithms, analyze their convergence complexity, and examine their performance in numerical experiments. We achieve three accomplishments in our research results throughout this dissertation. First, we incorporate a linesearch technique to a well-known projection-free sliding algorithm, namely the conditional gradient sliding (CGS) method. Our proposed algorithm, called the conditional gradient sliding with linesearch (CGSls), does not require the …

Manufacturability And Analysis Of Topologically Optimized Continuous Fiber Reinforced Composites, Jesus A. Ferrand

Doctoral Dissertations and Master's Theses

Researchers are unlocking the potential of Continuous Fiber Reinforced Composites for producing components with greater strength-to-weight ratios than state of the art metal alloys and unidirectional composites. The key is the emerging technology of topology optimization and advances in additive manufacturing. Topology optimization can fine tune component geometry and fiber placement all while satisfying stress constraints. However, the technology cannot yet robustly guarantee manufacturability. For this reason, substantial post-processing of an optimized design consisting of manual fiber replacement and subsequent Finite Element Analysis (FEA) is still required.

To automate this post-processing in two dimensions, two (2) algorithms were developed. The …

A Data Driven Modeling Approach For Store Distributed Load And Trajectory Prediction, Nicholas Peters

Doctoral Dissertations and Master's Theses

The task of achieving successful store separation from aircraft and spacecraft has historically been and continues to be, a critical issue for the aerospace industry. Whether it be from store-on-store wake interactions, store-parent body interactions or free stream turbulence, a failed case of store separation poses a serious risk to aircraft operators. Cases of failed store separation do not simply imply missing an intended target, but also bring the risk of collision with, and destruction of, the parent body vehicle. Given this risk, numerous well-tested procedures have been developed to help analyze store separation within the safe confines of wind …

Morton-Ordered Gpu Lattice Boltzmann Cfd Simulations With Application To Blood Flow, Gerald Gallagher, Fergal J. Boyle

Conference Papers

Computational fluid dynamics (CFD) is routinely used for numerically predicting cardiovascular-system medical device fluid flows. Most CFD simulations ignore the suspended cellular phases of blood due to computational constraints, which negatively affects simulation accuracy. A graphics processing unit (GPU) lattice Boltzmann-immersed boundary (LB-IB) CFD software package capable of accurately modelling blood flow is in development by the authors, focusing on the behaviour of plasma and stomatocyte, discocyte and echinocyte red blood cells during flow. Optimised memory ordering and layout schemes yield significant efficiency improvements for LB GPU simulations. In this work, comparisons of row-major-ordered Structure of Arrays (SoA) and Collected …

Evaluation Of Generative Models For Predicting Microstructure Geometries In Laser Powder Bed Fusion Additive Manufacturing, Andy Ramlatchan

Computer Science Theses & Dissertations

In-situ process monitoring for metals additive manufacturing is paramount to the successful build of an object for application in extreme or high stress environments. In selective laser melting additive manufacturing, the process by which a laser melts metal powder during the build will dictate the internal microstructure of that object once the metal cools and solidifies. The difficulty lies in that obtaining enough variety of data to quantify the internal microstructures for the evaluation of its physical properties is problematic, as the laser passes at high speeds over powder grains at a micrometer scale. Imaging the process in-situ is complex …

Utilization Of Finite Element Analysis Techniques For Adolescent Idiopathic Scoliosis Surgical Planning, Michael A. Polanco

Mechanical & Aerospace Engineering Theses & Dissertations

Adolescent Idiopathic Scoliosis, a three-dimensional deformity of the thoracolumbar spine, affects approximately 1-3% of patients ages 10-18. Surgical correction and treatment of the spinal column is a costly and high-risk task that is consistently complicated by factors such as patient-specific spinal deformities, curve flexibility, and surgeon experience. The following dissertation utilizes finite element analysis to develop a cost-effective, building-block approach by which surgical procedures and kinematic evaluations may be investigated. All studies conducted are based off a volumetric, thoracolumbar finite element (FE) model developed from computer-aided design (CAD) anatomy whose components are kinematically validated with in-vitro data. Spinal ligament stiffness …