Physical Sciences and Mathematics Commons^™

How Shape Of Simulated Graphene Sheets Affects Debye Scattering Patterns, Lindsay Lesh

Honors Projects

This research is about understanding the structure of a subset of graphitic stardust found in primitive meteorites (e.g. the Murchison meteorite). The carbon grains of interest exhibit a core-rim structure, where the core – with a density less than that of the graphitic rim – comprises the majority of the grain. Previous studies have shown that the cores are comprised primarily of unlayered graphene, and it has been hypothesized that the cores are the result of the rapid freezing (quenching) of a liquid carbon droplet. Electron diffraction is sensitive to small differences in crystal structure and simulated electron diffraction powder …

Graphene Kirigami And Its Use In Biocompatible Strain Sensor, Erik Vyhmeister

Honors Theses

Graphene's large fracture strain (>30%), chemical inertness, and piezoresistive nature make it well suited for use as a biocompatible strain sensor. A rectangular multilayer strucutre with graphene as its operative component was designed. It consists of a bottom layer of SU-8, a center layer of graphene, and a top layer of SU-8 and gold, with gold acting as the electrical contact. Kirigami-style patterning is applied via photolithography and oxygen plasma etching, allowing for a greater fracture strain. Additionally, the kirigami affects the stress concentraton in the graphene, affecting its piezoresistive gauge factor. The complete (patterned) structure exhibited a fracture …

Synthesis And Performance Of Novel Supramolecular Tools For Single-Particle Cryogenic Electron Microscopy And Drug And Gene Delivery, Kyle J. Wright

Open Access Dissertations

High-resolution biomacromolecular structure elucidation is fundamentally important to structure-based drug design and basic research into complex biochemical processes. Cryo-EM is an emerging alternative to XRD and NMR that is complementary in many ways relative to XRD and NMR. Materials approaches to cryo-EM are anticipated to greatly facilitate the cryo-EM process, allowing progress toward a more high-throughput application of cryo-EM to address challenges in structural biology. ^ Various affinity-based approaches inspired by approaches previously introduced for 2D crystallization were developed for facilitation of cryo-EM. A library of affinity lipopolymer constructs were synthesized consisting of lipopolymers of various PEG molecular weights conjugated …

Measuring Nonlinear Properties Of Graphene Thin Films Using Z-Scan Technique, Thekrayat Hassan Al Abdulaal

Graduate Theses and Dissertations

The nonlinear studies of two-dimensional (2D) nanomaterials, specifically graphene, are very significant since graphene is finding its usefulness in handling the enormous heat in nanoscale high-density power electronics. Graphene has emerged to be a promising nanomaterial as an excellent heat spreader due to its high thermal conductivity. However, the experimental nonlinear study of graphene materials and their application in developing future optoelectronic devices demands for more developed research.

The research objective is first to build a precise, and sensitive technique to investigate and understand the thermal nonlinear properties, including nonlinear refractive index (n2), nonlinear absorption coefficient (β), and thermo-optic coefficient …

Fabrication And Characterization Of Graphite Oxide Based Field Effect Transistors For Non­ Enzymatic Glucose-Sensor Application, Khadija Said Rahman

Theses

Graphite-oxide based metal–oxide–semiconductor field-effect transistors (MOSFETs) were fabricated and used as glucose sensor. Herein, graphite-oxide was assembled between two planer electrical electrodes. The sensitivity of the sensor has been enhanced by adding copper (Cu) or silver (Ag) nanoparticles. The nanoparticles were produced by sputtering and inert gas condensation inside an ultra-high vacuum compatible system, and they were self-assembled on the graphite-oxide. The sensitivity of the sensor was increased by an order of magnitude when the silver nanoparticles were added. The sensitivity of each MOSFET was studied at different concentrations of non-enzymatic glucose for potential use in medical and industrial applications.

Förster Resonance Energy Transfer Between Molecules In The Vicinity Of Graphene- Coated Nanoparticles, Tingting Bian, Railing Chang, Pui T. Leung

Physics Faculty Publications and Presentations

The recent demonstration of the plasmonic enhanced Förster resonance energy transfer (FRET) between two molecules in the vicinity of planar graphene monolayers is further investigated using graphene-coated nanoparticles (GNP). Due to the flexibility of these nanostructures in terms of their geometric (size) and dielectric (e.g. core material) properties, greater tunability of the FRET enhancement can be achieved employing the localized surface plasmons. It is found that while the typical characteristic graphene plasmonic enhancements are manifested from using these GNP’s, even higher enhancements can be possible via doping and manipulating the core materials. In addition, the broadband characteristics is further expanded …

Interaction-Induced Dirac Fermions From Quadratic Band Touching In Bilayer Graphene, Sumiran Pujari, Thomas C. Lang, Ganpathy Murthy, Ribhu K. Kaul

Physics and Astronomy Faculty Publications

We revisit the effect of local interactions on the quadratic band touching (QBT) of the Bernal honeycomb bilayer model using renormalization group (RG) arguments and quantum Monte Carlo (QMC) simulations. We present a RG argument which predicts, contrary to previous studies, that weak interactions do not flow to strong coupling even if the free dispersion has a QBT. Instead, they generate a linear term in the dispersion, which causes the interactions to flow back to weak coupling. Consistent with this RG scenario, in unbiased QMC simulations of the Hubbard model we find compelling evidence that antiferromagnetism turns on at a …

Spatial Inhomogeneous Barrier Heights At Graphene/Semiconductor Schottky Junctions, Dushyant Tomer

Theses and Dissertations

Graphene, a semimetal with linear energy dispersion, forms Schottky junction when interfaced with a semiconductor. This dissertation presents temperature dependent current-voltage and scanning tunneling microscopy/spectroscopy (STM/S) measurements performed on graphene Schottky junctions formed with both three and two dimensional semiconductors.

To fabricate Schottky junctions, we transfer chemical vapor deposited monolayer graphene onto Si- and C-face SiC, Si, GaAs and MoS2 semiconducting substrates using polymer assisted chemical method. We observe three main type of intrinsic spatial inhomogeneities, graphene ripples, ridges and semiconductor steps in STM imaging that can exist at graphene/semiconductor junctions. Tunneling spectroscopy measurements reveal fluctuations in graphene Dirac point …

Crystallographically-Oriented Carbon Nanotubes Grown On Few-Layer Graphene Films, Douglas R. Strachan, David P. Hunley

Physics and Astronomy Faculty Patents

A thermal and electrical conducting apparatus includes a few-layer graphene film having a thickness D where D≦1.5 nm and a plurality of carbon nanotubes crystallographically aligned with the few-layer graphene film.

Crystallographically-Oriented Carbon Nanotubes Grown On Few-Layer Graphene Films, David P. Hunley, Douglas R. Strachan

Physics and Astronomy Faculty Patents

A thermal and electrical conducting apparatus includes a few-layer graphene film having a thickness D where D≦1.5 nm and a plurality of carbon nanotubes crystallographically aligned with the few-layer graphene film.

Preparation And Characterization Of Van Der Waals Heterostructures, Horacio Coy Diaz

USF Tampa Graduate Theses and Dissertations

In this dissertation different van der Waals heterostructures such as graphene-MoS₂ and MoTe₂-MoS₂ were prepared and characterized. In the first heterostructure, polycrystalline graphene was synthesized by chemical vapor deposition and transferred on top of MoS₂ single crystal. In the second heterostructure, MoTe₂ monolayers were deposited on MoS₂ by molecular beam epitaxy.

Characterization of graphene-MoS₂ heterostructures was conducted by spin and angle resolve spectroscopy which showed that the electronic structure of the bulk MoS₂ and graphene in this van der Waals heterostructures is modified. For MoS₂ underneath the graphene, a band …

The Effects Of Hydrazine Monohydrate Surface Doping On Graphene, Christian M. Stewart

Macalester Journal of Physics and Astronomy

In this project we investigate how the carrier concentration and scattering time of chemical vapor deposition (CVD) graphene samples are affected by the exposure of these samples to hydrazine monohydrate. We used both immersion techniques and vapor deposition techniques to surface dope our graphene samples. We use both Fourier transform infrared spectroscopy and Hall effect measurements to investigate these effects.We find that after surface doping CVD graphene samples, the electron concentration greatly increases while the scattering time is nearly unaffected. We also find that this doping process with hydrazine monohydrate is reversible.

Modeling The Behavior Of The Graphene To Liquid Interfaces In An Electrolytic Liquid, Caitlin Duffner

Senior Theses

Understanding the mechanism for charge transfer between a graphene biosensor and its electrodes within an electrolyte solution is vital to better understand the sources of electrical noise in the system. By measuring the effective resistance and capacitance of the system at different frequencies, it is possible to develop a circuit model of the system's electrical behavior. This model provides a deeper understanding of the fundamental interactions that occur in a top-­gated graphene device and provides opportunities to improve a signal. To reduce noise created at the liquid to graphene interface, a buffer layer of Yttrium Oxide was applied. While the …

Effect Of Electrolyte Concentration On The Capacitance And Mobility Of Graphene, Flint A. Martino

Senior Theses

The use of graphene field-effect transistors as a biosensor is increasingly being used to study biological phenomena, due to the sensitivity and low reactivity of graphene. To further improve sensitivity in biological environments, we examined how different salt concentrations affect the mobility of capacitance of the graphene. Samples were also measured after an annealing process. We report on the positive correlation between sensitivity and electrolyte concentration and speculate on methods to improve future detectors. Mobility of the device was found to change from 1.07*10³cm²/ (V*s) in de-ionized water to 2.78*10³cm²/ (V*s) in …

Visible-Light-Responsible Co-Catalysts Enhanced By Graphene For Solar Energy Harvesting, Chen Ying

Masters Theses & Specialist Projects

This study focuses on the visible light response of hetero-structures of TiO2-graphene- MoS2 for solar energy harvestings. The commercial P25 TiO2 nano-particles, and selfprepared layered reduced graphene oxides (RG) and MoS2 were assembled for the targeted hetero-structure materials as visible-light responsible solar harvesting cocatalysts. The hydrothermal method was applied for nano-material synthesis, the reduction of graphene oxides, and bonding formation. Multiple characterization methods (SEM-TEM, XRD, XPS, UV-VIS, PL, FT-IR, TGA) have been applied to understand the electron-hole pair separation and recombination, and performance tuning in their visible-light photo-catalysis rhodamine B (Rh.B) degradations process

Compared to TiO2, an obvious red shift …

Structure-Interaction Effects In Novel Nanostructured Materials, Nam B. Le

USF Tampa Graduate Theses and Dissertations

Recent advances in experimental and computational methods have opened up new directions in graphene fundamental studies. In addition to understanding the basic properties of this material and its quasi-one dimensional structures, significant efforts are devoted to describing their long ranged dispersive interactions. Other two-dimensional materials, such as silicene, germanene, and transition metal dichalcogenides, are also being investigated aiming at finding complementary to graphene systems with other "wonder" properties. The focus of this work is to utilize first principles simulations methods to build our basic knowledge of structure-interaction relations in two-dimensional materials and design their properties. In particular, mechanical folding and …

Emergence Of Helical Edge Conduction In Graphene At The Ν = 0 Quantum Hall State, Pavel Tikhonov, Efrat Shimshoni, H. A. Fertig, Ganpathy Murthy

Physics and Astronomy Faculty Publications

The conductance of graphene subject to a strong, tilted magnetic field exhibits a dramatic change from insulating to conducting behavior with tilt angle, regarded as evidence for the transition from a canted antiferromagnetic (CAF) to a ferromagnetic (FM) ν = 0 quantum Hall state. We develop a theory for the electric transport in this system based on the spin-charge connection, whereby the evolution in the nature of collective spin excitations is reflected in the charge-carrying modes. To this end, we derive an effective field-theoretical description of the low-energy excitations, associated with quantum fluctuations of the spin-valley domain-wall ground-state configuration which …

Toward High Performance Nanocarbon Fibers, Michaela R. Pfau

Master's Theses

High performance carbon fibers (CFs) have been a commercially available since their commercial boom in the 1970s, and are generally produced via carbonization of poly (acrylonitrile) (PAN). More recently, carbon nanomaterials like graphene and carbon nanotubes (CNTs) have been discovered and have shown excellent mechanical, thermal, and electrical properties due to their sp² carbon repeating structure. Graphene and CNTs can both be organized into macroscopic fibers using a number of different techniques, resulting in fibers with promising mechanical performance that can be readily multifunctionalized. In some cases, the two materials have been combined, and the resulting hybrid fibers have …

Electrochemical H2O2Sensor Based On The Co-Immobilization Of Phosphmolybdic Acid And Graphene On Pedot Film Electrode With Nafion, Hao-Xian Zhou, Jun-Ming Zhang, Zhi-Yu Qu, Pan-Yu Zhang, You-Jun Fan

Journal of Electrochemistry

With a glassy carbon electrode (GCE) as the substrate, the poly(3,4-ethylenedioxythiophene) (PEDOT) film electrode was prepared through the electrochemical polymerization method, then a novel non-enzymatic electrochemical H₂O₂ sensor was fabricated by co-immobilizing phosphomolybdic acid and graphene with Nafion on the PEDOT/GCE electrode. The modified electrodes were characterized by scanning electron microscopy (SEM), while the responsive properties of the sensor to H₂O₂ were investigated by cyclic voltammetry and chronoamperometry. The results demonstrated that, under the optimized conditions, the sensor exhibited good electrocatalytic performance for H₂O₂ reduction. The current response of the sensor …

Electrochemical Syntheses Of Graphene And Its Composites, Bo Zhao, Li Jiang, Ming-Hui Yuen, Xian-Zhu Fu, Rong Sun, Ching-Ping Wong

Journal of Electrochemistry

Graphene is a kind of ideal two-dimensional flat carbon nanomaterials which have unique chemical and physical properties. The attractive potential applications must be based on the high quality mass production of graphene. However, it remains a huge challenge.An electrochemical approach is a fast, environmental friendly and easy-operating method. single- or multi-layered graphene flakes can easily be produced in short periods of time. In this review, the structure, properties and preparation methods of graphene are first introduced. Accordingly, the electrochemical approaches used for the productions of graphene flakes，graphene/inorganic nanocomposites, graphene/polymer composites and graphene analogues are highlighted. Finally, challenges and opportunities are …

Interface-Induced Spin Polarization In Graphene On Chromia, Renu Choudhary, Pankaj Kumar, Priyanka Manchanda, David J. Sellmyer, Peter A. Dowben, Arti Kashyap, Ralph Skomski

Physics Faculty Publications and Presentations

The induced spin polarization of graphene on Cr₂O₃ (001) is investigated using density-functional theory (DFT) and model calculations. The magnetic moment in graphene is a proximity effect and can be regarded as a second-order Stoner scenario, and similar mechanisms are likely realized for all graphene systems with an insulating magnetic substrate. In the absence of charge transfer, the magnetic moment would be quadratic in the exchange field, as contrasted to the usually encountered approximately linear dependence. The net magnetization of the graphene is small, of the order of 0.01 μB per atom, but the energy-dependent spin …

The Study Of Nano-Optics In Hybrid Systems, Marek J. Brzozowski

Electronic Thesis and Dissertation Repository

In this thesis, we study the quantum light-matter interaction in polaritonic heterostructures. These systems are made by combining various nanocomponents, such as quantum dots, graphene films, metallic nanoparticles and metamaterials. These heterostructures are used to develop new optoelectronic devices due to the interaction between nanocomposites.

Photoluminescence quenching and absorption spectrum are determined and an explanatory theory is developed for these polaritonic heterostructures. Photoluminescence quenching is evaluated for a graphene, metallic nanoparticle and quantum dot system. It is shown that average distance between nanocomposites or concentration of nanocomposites affect the output these system produced. Photoluminescence quenching was also evaluated for a …

Collective Bulk And Edge Modes Through The Quantum Phase Transition In Graphene At Ν = 0, Ganpathy Murthy, Efrat Shimshoni, H. A. Fertig

Physics and Astronomy Faculty Publications

Undoped graphene in a strong, tilted magnetic field exhibits a radical change in conduction upon changing the tilt angle, which can be attributed to a quantum phase transition from a canted antiferromagnetic (CAF) to a ferromagnetic (FM) bulk state at filling factor ν = 0. This behavior signifies a change in the nature of the collective ground state and excitations across the transition. Using the time-dependent Hartree-Fock approximation, we study the collective neutral (particle-hole) excitations in the two phases, both in the bulk and on the edge of the system. The CAF has gapless neutral modes in the bulk, whereas …

Charge-Induced Fluctuation Forces In Graphitic Nanostructures, D. Drosdoff, Igor V. Bondarev, Allan Wisdom, Rudolf Podogrnik, Lilia M. Woods

Physics Faculty Publications

Charge fluctuations in nanocircuits with capacitor components are shown to give rise to a novel type of long-ranged interaction, which coexist with the regular Casimir–van der Waals force. The developed theory distinguishes between thermal and quantum mechanical effects, and it is applied to capacitors involving graphene nanostructures. The charge fluctuations mechanism is captured via the capacitance of the system with geometrical and quantum mechanical components. The dependence on the distance separation, temperature, size, and response properties of the system shows that this type of force can have a comparable and even dominant effect to the Casimir interaction. Our results strongly …

Electronic Transport In Two-Dimensional Systems In The Quantum Hall Regime, Vinicio Tarquini

Wayne State University Dissertations

The integer and the fractional quantum Hall effects are essential to the exploration of quantum matters characterized by topological phases. A quantum Hall system hosts one-dimensional (1D) chiral edge channels that manifest zero magnetoresistance, dissipationless due to the broken time reversal symmetry, and quantized Hall resistance v h e^2 with v being the topological invariant (or Chern number). The 1-1 correspondence between the conducting gapless edge channels to the gapped incompressible bulk states is a defining character of a topological insulator (TI). Understanding this correspondence in real systems, especially the origin of its robustness (in terms of the limit of …

Physical And Electronic Properties Of Nanoscale 2d Materials, Mathias J. Boland

Theses and Dissertations--Physics and Astronomy

There is a great push towards reducing the size scale of both electronic components and machines. Two dimensional materials, such as graphene, are ideal candidates towards this push, as they are naturally atomically thin. In the case of nanoscale machines, the mechanical properties of the material surfaces become increasingly important. The use of laminar materials, such as graphene and MoS₂, to modify the surface properties, yet maintain nanoscale topographical features, are very attractive. Towards this goal, we have investigated the surface properties of MoS₂ at the nanoscale using Lateral Force Microscopy (LFM). In these investigations, we measure …

Characterisation Of Graphene Fibres And Graphene Coated Fibres Using Capacitively Coupled Contactless Conductivity Detector, Joan M. Cabot, Emer Duffy, Sinead Currivan, Andres Ruland Palaia, Rouhollah Jalili, Attila J. Mozer, Peter C. Innis, Gordon G. Wallace, Michael C. Breadmore, Brett Paull

Australian Institute for Innovative Materials - Papers

The use of capacitively coupled contactless conductivity detection (C 4 D) for the characterisation of thin conductive graphene fi bres, graphene composite fi bres, and graphene coated fi brous materials is demon- strated for the fi rst time. Within a few seconds, the non-destructive C 4 D detector provides a pro fi le of the longetudinal physical homogeneity of the fi bre, as well as extra information regarding fi bre mophology and composition. In addition to the theoretical considerations related to the factors a ff ect the output signal, this work evaluates the properties of graphene fi bres using scanning …

Nitrogen-Doped Graphene Ribbon Assembled Core-Sheath Mno@Graphene Scrolls As Hierarchically Ordered 3d Porous Electrodes For Fast And Durable Lithium Storage, Yun Zhang, Penghui Chen, Xu Gao, Bo Wang, Heng Liu, Haobin Wu, Hua-Kun Liu, Shi Xue Dou

Australian Institute for Innovative Materials - Papers

Graphene scroll is an emerging 1D tubular form of graphitic carbon that has potential applications in electrochemical energy storage. However, it still remains a challenge to composite graphene scrolls with other nanomaterials for building advanced electrode configuration with fast and durable lithium storage properties. Here, a transition-metal-oxide-based hierarchically ordered 3D porous electrode is designed based on assembling 1D core-sheath MnO@N-doped graphene scrolls with 2D N-doped graphene ribbons. In the resulting architecture, porous MnO nanowires confined in tubular graphene scrolls are mechanically isolated but electronically wellconnected, while the interwoven graphene ribbons offer continuous conductive paths for electron transfer in all directions. …

Oxygen-Free Layer-By-Layer Assembly Of Lithiated Composites On Graphene For Advanced Hydrogen Storage, Guanglin Xia, Yingbin Tan, Xiaowei Chen, Fang Fang, Dalin Sun, Xingguo Li, Zaiping Guo, Xuebin Yu

Australian Institute for Innovative Materials - Papers

A facile hydrogenation-induced self-assembly strategy to synthesize lithium hydride (LiH) nanosheets with a thickness of 2 nm that are uniformly distributed on graphene is reported and designed. Taking advantage of LiH nanosheets with high reactivity and a homogeneous distribution on graphene support as a nanoreactor, the confined chemical synthesis of oxygen-free lithiated composites is effectively and efficiently realized.

Drag Reduction Using Graphene In Viscous Laminar Flow With Water And Isopropanol, Jessica M. Patalano, Akm Newaz Dr.

STAR Program Research Presentations

America has over 2.6 million miles of pipeline for the transportation of energy products, such as liquid petroleum and natural gas. Friction is one of the main sources for energy dissipation at liquid/solid interfaces that limits the transport of a fluid through a cylindrical pipe or tube. In order to make these pipelines more efficient and enhance the flow of these materials, it is necessary to find a coating material that reduces the frictional drag. The ideal material would reduce the drag between the fluid and solid interface while being easily synthesizable on the surface. The goal of this project …