Physical Sciences and Mathematics Commons^™

Aspects Of Stochastic Geometric Mechanics In Molecular Biophysics, David Frost

All Dissertations

In confocal single-molecule FRET experiments, the joint distribution of FRET efficiency and donor lifetime distribution can reveal underlying molecular conformational dynamics via deviation from their theoretical Forster relationship. This shift is referred to as a dynamic shift. In this study, we investigate the influence of the free energy landscape in protein conformational dynamics on the dynamic shift by simulation of the associated continuum reaction coordinate Langevin dynamics, yielding a deeper understanding of the dynamic and structural information in the joint FRET efficiency and donor lifetime distribution. We develop novel Langevin models for the dye linker dynamics, including rotational dynamics, based …

Hydrothermal Synthesis Of First-Row Transition Metal Polyanions Towards The Design Of Frustrated Magnetic Materials, Megan Smart

All Dissertations

Novel modern materials are constantly being discovered as humanity seeks constantly better improvement to the optics and electronics around us, from lasers used in medical therapies to the magnets and supercomputing chips in our phones. Inorganic oxides commonly draw inspiration from naturally occurring minerals to template new discoveries through substitution of similarly behaving elements with the goal of inducing certain desired properties, such as ferroelectricity or creating the elusive quantum spin liquid. While many minerals are silicates, its periodic table neighbor germanium(IV) has a rich and under-explored crystal chemistry that could contain many new structures and magnetic materials. Another common …

Studies On Electrochemical Hydrogen Isotope Separation, Liyanage Mayura Sankalpa Silva

All Dissertations

Graphene-integrated Proton Exchange Membrane (PEM) electrochemical cells have emerged as a novel area of scientific investigation in the realm of hydrogen isotope separation. Chemical Vapor Deposited (CVD) graphene has been especially useful due to its large-scale production capability for scaling-up purposes. The research described in this dissertation explores the role that inadvertent introduction of cations, notably ammonium and copper, during the CVD graphene transfer onto PEM substrates, such as Nafion, might play in affecting hydrogen ion transport and isotope separation in PEM electrochemical cells. An extensive review of existing literature exposed a gap concerning unintentional cation introductions during graphene transfer, …

Understanding The Interaction Of Environmental Contaminants With Polystyrene Nanoparticles And Dna Using Nuclear Magnetic Resonance Spectroscopy And Density Functional Theory, Saduni Arachchi

All Dissertations

The objective of the thesis is to study the effect of environmental pollutants on polystyrene nanoparticles and biomolecules. This is done in two different techniques, particularly NMR and density functional theory. In this thesis, we use a combination of 1H NMR, Saturation-Transfer Difference (STD) NMR and relaxation experiments to study the interactions, kinetics and dynamics of antibiotics with polystyrene nanoparticles. (PS NPs) Density functional theory (DFT) is used to study the binding of commonly used non-oxidative hair dyes to biomolecules (DNA and amino acids) and PS particles.

Computationally-Driven Insights Into The Ligand Environments Of Materials For Catalysis And Separations, Stephen Vicchio

All Dissertations

Designing new catalytic and sorption materials is necessary to limit global temperature rise below 1.5 ◦C by 2050, while also meeting global energy demands. Climate change and energy production are not mutually exclusive; global population growth has direct impacts on global energy demands and climate. In both catalysis and adsorption applications, new technologies are needed to address these challenges. Catalysis can provide alternate, low-energy routes for converting low-value gases into higher-value chemical commodities, thus altering our current energy production. Likewise, new sorption materials can capture previously emitted CO₂ from decades of energy production from fossil fuels, thus helping to …

Expansion Of The Diazacyclobutene Motif For Antiparasitic Evaluation, Brock Alexander Miller

All Dissertations

Molecules containing N-heterocycles are prevalent in pharmaceutical settings. The ability to generate highly functionalized molecules containing N-heterocycles in very few synthetic operations is valuable for drug discovery. Our group has developed a two-step synthesis to access a rarely studied diazacyclobutene scaffold via a formal [2+2] cycloaddition between 4-phenyl-1,2,4-triazolinedione and electron-rich thioalkynes. Our interest in this scaffold increased exponentially from promising preliminary biological evaluations against a protozoan parasite, Trypanosoma brucei. While we were able to double the number of historical examples of this scaffold, there were significant limitations in our methodology. The most notable limitations were the lack …

Atom Economical Reactions Of Terpenoids And Post-Consumer Plastics With Sulfur, Charini Maladeniya

All Dissertations

The production of Ordinary Portland Cement (OPC) and its uses have a complicated environmental impact, which is influenced by infrastructure development and building operations as well as CO₂ emissions, which account for 7% of all worldwide CO₂ emissions. Due to the increasing population, production is still ongoing. The search for cement and construction materials produced with zero to low CO₂ emissions is therefore continuous. Finding recyclable, CO₂ gas-free biocomposites with high sulfur content that can rival the mechanical properties of popular building supplies like Portland cement is the primary objective of the research discussed in this …

Composite And Polymer Formulation Employing Sulfur And Bio-Olefin Feedstocks, Claudia V. Lopez

All Dissertations

Environmental sustainability represents a challenge for society since industrial growth has a direct impact on natural resources and waste production. New technologies that effectively incorporate waste into renewable resources are critical to the development of a sustainable and circular economy. The manufacturing of structural materials like Portland cement (OPC) is responsible for >8% of the global anthropogenic emissions of carbon dioxide, with ~ 1 kg of CO₂ released to the atmosphere for every kilogram of OPC produced. For instance, the development of sustainable structural materials is a key factor to reduce the greenhouse emissions and to attenuate the climate …

Characterization Of Mechanically Recycled Polylactic Acid (Pla) Filament For 3d-Printing By Evaluating Mechanical, Thermal, And Chemical Properties And Process Performance, Mahsa Shabani Samghabady

All Theses

Polylactic acid (PLA) is a biopolymer made from renewable resources such as sugar and corn. PLA filament is a popular material used in Fused Deposition Modeling (FDM) 3D-printing. While this material has many advantages, all the failed parts, support structures, rafts, nozzle tests, and the many prototype iterations during the 3D-printing process contribute to the plastic pollution and release of greenhouse gases. Although PLA is biodegradable, it can take years to degrade in landfills. Instead of throwing away PLA waste and buying new filaments, PLA can be recycled. Amongst the different recycling technologies, mechanical recycling is the most environmentally friendly. …

Electron-Transfer Mediated Photo-Switching In Nanoparticles, Liaoran Cao

All Dissertations

Previous publications from our lab demonstrated viable approaches to design a photo-switching nanoparticle with arguably superior brightness and photostability resulting in an improved resolution in localization-based microscopy, as compared to other photo-switching dyes or particles. As a follow-up, this dissertation is focused on two major tasks: first, developing nanoparticles with better photo-switching properties for super-resolution imaging; second, trying to achieve a better physical picture of the mechanisms involved in photo-switching, including polaron dynamics, charge transfer, and energy transfer. A new class of photo-switchable nanoparticles was developed by blending conjugated polymer semiconductor with fullerene-based electron acceptors, and further blending with polystyrene …

The Influence Of Allostery Governing The Changes In Protein Dynamics Upon Substitution, Joseph Hess

All Dissertations

The focus of this research is to investigate the effects of allostery on the function/activity of an enzyme, human immunodeficiency virus type 1 (HIV-1) protease, using well-defined statistical analyses of the dynamic changes of the protein and variants with unique single point substitutions ¹. The experimental data¹ evaluated here only characterized HIV-1 protease with one of its potential target substrates. Probing the dynamic interactions of the residues of an enzyme and its variants can offer insight of the developmental importance for allosteric signaling and their connection to a protein’s function. The realignment of the secondary structure elements can …

Characterizing Metabolic Activity Of Fish Liver Microsomes Towards Fluoxetine In Four Fish Species Using Michaelis-Menten Enzyme Kinetics, Morgan Steiner

Honors College Theses

Discharge of pharmaceuticals into the environment is of emergent concern due to the unknown long-term effects on aquatic organisms. Wastewater treatment plants are not effective in completely removing pharmaceuticals, allowing them to be discharged into aquatic systems. To investigate the potential effects of fluoxetine, a common antidepressant, on aquatic species, the potential of four freshwater fish species to metabolize this drug was investigated. Livers from redbreast sunfish, bluegill, striped jumprock and bluehead chub were collected, homogenized, and centrifuged to collect the microsomes. These microsomes were used in an assay to determine the in vitro hepatic metabolism of fluoxetine by cytochrome …

Hydrothermal Synthesis Of Frustrated Lanthanide Pyrochlores And Transition Metal Double Perovskites And Germanates, Matthew S. Powell

All Dissertations

Magnetically frustrated materials hold promise of unique behavior allowing for the novel study of quantum phenomena. Such materials are poised to become an integral foundation for technological advancement in the post-Silicon Age. Crystalline materials are given special focus where the rigid lattice allows more detailed study of these quantized effects and frustration behavior. As opposed to polycrystalline powders, large single crystals can be preferentially aligned enabling the study of anisotropic behavior. Two cubic structure types have garnered significant interest due to their 3-D tetrahedral arrangement of symmetry-related metal centers with the potential for magnetic frustration: pyrochlores and perovskites.

The supercritical …

Impacts Of Preferential Flow On Tc-99and Np-237 Vadose Transport In Soils At The Savannah River Site, Josh Parris

All Theses

Since the 1950s, the United States has produced approximately 90,000 metric tons of spent nuclear fuel (SNF) (Office of Nuclear Energy, 2022); however, no long-term storage solutions are available. Technecium-99 and neptunium-237, two fission products found in SNF, readily form highly mobile species in oxidizing conditions (Hu, 2008; Bondietti, 1979) and have respective half-lives of 2.13 x 10⁵ and 2.14 x10⁶ years (Hu, 2010). Considering these characteristics, ⁹⁹Tc and ²³⁷Np are two risk-driving isotopes found in SNF storage. The process of macropore-facilitated preferential flow, transport through cracks within a soil matrix, has been recognized to increase …

Elucidation Of Active Site And Mechanism Of Metal Catalysts Supported In Nu-1000, Hafeera Shabbir

All Dissertations

Advances in extraction of shale oil and gas has increased the production of geographically stranded natural gas (primarily consisting of methane (C1) and ethane (C2)) that is burned on site. A potential utilization strategy for shale gas is to convert it into fuel range hydrocarbons by catalytic dehydrogenation followed by oligomerization by direct efficient catalysts. This work focuses on understanding metal cation catalysts supported on metal-organic framework (MOF) NU-1000 that will actively and selectively do this transformation under mild reaction conditions, while remaining stable to deactivation (via metal agglomeration or sintering). I built computational models validated by experimental methods to …

Computational And Experimental Investigations Of Alkali Cation Interactions At The Rutile – Water Interface, Isaac Johnston

All Dissertations

Overall, the objective of this dissertation was to investigate the degree of sorption for the alkali cations on rutile to ascertain the impact of different cation properties, such as ion size and charge density, on sorption mechanics as well as probe how the ion may alter the surface – aqueous interface. Initial molecular dynamic simulations and batch experiments showed minimal surface sorption for any alkali cation at relatively low concentrations while simultaneously suggesting the enthalpy of deprotonation shifts slightly in the presence of the alkali cations at different ionic strengths. The cations are likely causing small reorientations of the near-surface …

Isolation And Characterization Of Extracellular Vesicles From Various Biological Matrices Using Capillary-Channeled Polymer (C-Cp) Fiber Solid-Phase Extraction Spin-Down Tips, Kaylan Jackson

All Dissertations

A number of recent works have emphasized the need to isolate nanometer-scale analytes, like extracellular vesicles (EVs), from various biologically-relevant fluids. Exosomes are a subset of small EVs that range from 30-200 nm in diameter that serve as biomolecular snapshots of their cell of origin containing mother cell-specific DNA, miRNA, mRNA, and proteins. As critical components of intercellular communication, exosomes and other EVs play significant roles in many physiological and pathological processes. Diverse populations of these vesicles can be collected from biofluids, including blood, saliva, and urine, from cell culture conditioned media and primary cells, and even from plant …

Development Of Plasmonic And X-Ray Luminescence Nanoparticles For Bioimaging And Sensing Applications, Meenakshi Ranasinghe

All Dissertations

This dissertation discusses the development of plasmonic and X-ray luminescence nanoparticles (~100 nm) to use in bioimaging and sensing applications. The nanoparticles have interesting optical properties compared to their atomic levels and bulk materials. The optical properties of nanomaterials can be controlled by changing size, shape, crystal structure, etc. Also, they have a large surface area that can be functionalized with biomolecules. Therefore, the optical properties and biofunctionalized nanomaterials are useful in biomedical applications such as targeted drug delivery, bioimaging, and sensing. The overall theme is to use nanoparticles with interesting optical properties compared to their atomic levels and bulk …

Understanding Dynamics Of Polymers Under Confinement: A Molecular Dynamics And Neutron Scattering Study, Supun Samindra Kamkanam Mohottalalage

All Dissertations

The current study probes the structure, dynamics, and rheological behavior of associating polymers including ionomers in melts and solutions as well as conjugated polymers confined into nanoparticles, using molecular dynamics (MD) simulations and neutron scattering techniques. The study focuses on two families of associative polymers, ion containing macromolecules and conjugated polymers.

Polymers that consist of ionizable groups along their backbone found uses in a broad range of applications. Examples include light weight energy storage and generation systems, and biomedical applications, where the polymers act as ion exchange membranes, and actuators. The ionic groups tend to form clusters that are in …

Radioluminescence Based Biochemical Sensing And Imaging Strategies To Measure Local Drug Release And Ph, Gretchen B. Schober

All Dissertations

In this dissertation we describe methods for measuring infection relevant biochemical analytes using radioluminescent and ultrasound luminescent materials. Films and nanoparticles fabricated with europium doped gadolinium oxysulfide (Gd₂O₂S:Eu³⁺) are used to quantitatively measure radiolabeled pharmaceutical concentration, specifically tritium labeled vancomycin (³H-vancomycin). Europium and dysprosium doped strontium aluminate is used to fabricate an ultrasound modulated, pH sensing film. These methods are indicated for theranostic evaluation of implant associated infection. Bacterial biofilms are inherently resistant to traditional antibiotic treatment and can coat biomedical implants. These biofilm related infections are difficult or impossible to eradicate …

State-Based Biological Communication, Nathan Clement

All Theses

Allostery (1) is the process through which proteins self-regulate in response to various stimuli. Allosteric interactions occur between nonadjacent spatially distant residues (1), and they are exhibited through the correlated motions (2) and momenta of participating residues. The location of allosteric sites in proteins can be determined experimentally but computational methods to predict the location of allosteric sites are being developed as well (2-4, 10). Experimental and computational methodologies for locating allosteric sites can be used to design specific targeted drug delivery (5-6, 19), but these methods have not yet …

Application Of A 14c-Assay To Assess Methanotrophic Biodegradation Of Tce In Low Ph Groundwater, Evan Groome

All Theses

Current biological strategies for remediating trichloroethylene (TCE) in low pH aquifers (i.e., pH14C-TCE assay was developed to determine pseudo first-order rate constants for the degradation of TCE in microcosms containing soil and groundwater from the Boeing Michigan Aeronautical Research Center (BOMARC) superfund site, where the pH ranges from 4.1 to 4.9. The ¹⁴C-TCE assay was also adapted to calculate soil-normalized rate constants for data from this site, as well as data that Szwast²¹ collected from the Beltsville Agricultural Research Center (BARC). In addition to natural attenuation, biostimulation through amendments of methane and nutrients were also assessed. This treatment …

Isolation Of Proteins And Extracellular Vesicles Via Capillary-Channeled Polymer Fiber Stationary Phases, Lacey Billotto

All Theses

Capillary-channeled polymer (C-CP) fiber stationary phases have been developed by the Marcus lab as an alternative approach to traditional, commercially-available silica-based supports for biomacromolecule separations. C-CP columns are created with natural and synthetic base polymers in a variety of chemistries and shapes, allowing for customization of separations, while providing low material costs and ease of construction. The stationary phase is virtually nonporous with respect to the size of proteins and can operate under high linear velocities (~100 mm s^-1) while maintaining relatively low backpressures. As a result of these hydrodynamic benefits, low flow resistance at high volume flow …

Competition Between Halogen And Chalcogen Bonding And Their Role In Probing Organic Transformations, Andrew Peloquin

All Dissertations

Halogen bonding, the attractive interaction of an electrophilic region on a halogen atom with a nucleophilic region on another atom or molecule, provides a highly directional tool in forming solid-state motifs. This interaction, along with the related chalcogen bonding interactions, forms powerful synthons, which, when combined with other typical intermolecular attractions such as hydrogen bonding, allow for the design of supramolecular structures and inputs to crystal engineering. This dissertation research serves two primary purposes: (1) to catalog halogen and chalcogen bonding interactions with various donor molecules and (2) to utilize these interactions to probe interesting organic transformations.

In order to …

Synthesis Of Fluorinated Monomers And Polymers For Various Applications, Cassandra J. Hager

All Dissertations

The world of industry utilizes a variety of polymers for various applications in many prominent fields. From electronics to food storage, the versatility of this class of chemistry has been widely proven. The Thrasher research group undertook a program dedicated towards the development of a library of fluorinated materials that focused on the synthesis and characterization of perfluoroalkoxy (PFA) copolymers of tetrafluoroethylene (TFE) and perfluoroalkyl trifluorovinyl ethers. One aim of the project was to improve upon the mechanical strength and wearability of commercial PFA resins by incorporating bulkier perfluoroalkoxy trifluorovinyl ether monomers into these copolymers. In addition to focusing on …

Valorization Of Biopolymers And Biomass To Produce Materials For A More Circular Economy, Moira Lauer

All Dissertations

With a globally increasing population and largely unchecked consumption of raw materials, human society is on track for devastating consequences. Two industries responsible for utilizing massive amounts of raw materials and generating equally gargantuan quantities of waste are the packaging and infrastructure sectors. In 2017 in Europe, for example, packaging reached a record 173 kg of packaging waste per capita. One of the largest packaging consumers is the food industry, in which 40% of packaging is made of petroleum-derived single-use plastic, leading to a massive carbon imbalance. “The Built Environment,” on the other hand, is responsible for about 50% of …

Extractive Membranes For The Detection And Screening Of Waterborne Plutonium, James Foster

All Dissertations

The development of rapid screening tools for special nuclear materials remains a crucial focus for nonproliferation efforts. Traditional approaches for the analysis of trace-level Pu isotopes in water requires tedious and time-consuming sample preparation steps that do not lend well to expeditious screening. Therefore, a novel analytical method that combines both Pu concentration and source preparation into a single detection system would make for an invaluable tool for nuclear security applications. Extractive membranes absorbers can help to fulfill this role as they are capable of concentrating Pu to detectable limits while subsequently serving as alpha spectrometry sample sources. In Chapter …

Automated Parallel Optimization Of Simulation Parameters Using Modified Nelder-Mead Simplex Algorithm, Erina Mills

All Dissertations

Computational simulations used in many fields have parameters that define models that are used to evaluate simulated properties. When developing these models, the goal is to choose the parameters that best replicate a set of desired properties. Mathematical optimization methods can be used to optimize the simulation parameters by defining a function that uses simulation parameters as input and outputs a value describing how well a set of experimental properties are reproduced.

Because simulated properties are often calculated using stochastic sampling methods, this optimization involves an objective function that is noisy and expensive to evaluate. Also, optimization of the simulation …

Synthesis And Molecular Processes Governing Self-Healing Polymeric Materials, Siyang Wang

All Dissertations

Self-healing polymers capable of recovering from physical damages are promising materials for advanced technologies. In these studies, we developed routes to achieve self-healable properties in acrylic-based copolymers that rely on non-covalent dipolar interactions present in essentially all polymeric materials. Using a combination of spectroscopic tools, thermo-mechanical analysis, and molecular dynamic (MD) simulations, these studies have shown that dipolar interactions lead to conformational changes of macromolecular segments which, in turn, result in self-healing without external intervention. This dissertation also describes the development of novel self-healable acrylic-based covalent adaptable networks (CANs) that combine reprocessing and self-healing properties. The utilization of dipolar interactions …

A Performance Evaluation Of Architectural Coatings To Preserve Aerosol Paint On Concrete, Riley Morris

All Theses

The growing movement of assigning cultural and heritage value to graffiti and street art is one without a preservation solution to ensure the longevity of these works in-situ in an outdoor environment. The goal of this thesis was to provide a comprehensive evaluation of six architectural topcoats’ performance when applied as a conservation treatment to outdoor aerosol graffiti and street art on concrete substrate. An artist’s quality, durable, color-fast spray-paint was applied to twenty-eight concrete test panels to mimic the application of graffiti or street art. Six topcoats, Prosoco SC-1, Prosoco Gloss n’ Guard WB, Keim Faceal Oleo HD®, Keim …