Physical Sciences and Mathematics Commons^™

Nuclear Criticality, Shielding, And Thermal Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Denis Beller

Separations Campaign (TRP)

The first step in any transmutation strategy is the separation of radionuclides in used nuclear fuel. The current separation strategy supporting the Advanced Fuel Cycle Initiative (AFCI) program is based on the use of a solvent extraction separation process to separate the actinides, fission products, and uranium from used commercial nuclear fuel, and on the use of pyrochemical separation technologies to process used transmuter fuels. To separate the fission products and transuranic elements from the uranium in used fuel, the national program is developing a new solvent extraction process, the Uranium Extraction Plus, or UREX+, process, based on the traditional …

Evaluation Of Fluorapatite As A Waste-Form Material, Dennis W. Lindle, Dale L. Perry

Separations Campaign (TRP)

Fluorapatite, fluorinated calcium phosphate, has been identified as a potential matrix for the entombment of the zirconium fluoride fission product waste stream from the proposed FLEX process. If the efficacy of fluorapatite based waste-storage can be demonstrated, then new and potentially more-efficient options for handling and separating high-level wastes, based on fluoride-salt extraction, will become feasible. This proposal is for renewal of the UNLV portion of a dual-path research project to develop a process to fabricate a synthetic fluorapatite waste form for the ZrF₄, FP waste stream, characterize the waste form, examine its performance under environmental conditions, and …

Evaluation Of Fluorapatite As A Waste-Form Material, Dennis W. Lindle, Dale L. Perry

Separations Campaign (TRP)

Argonne National Laboratory has proposed a new extraction procedure to handle TRISO-coated fuels, the Fluoride Extraction Process, or FLEX. The FLEX process is designed to separate the uranium in the fuel from the actinides and most fission products by taking advantage of the unique properties of uranium hexafluoride (UF₆). In the FLEX process, the used TRISO fuel is reacted with zirconium fluoride salt, forming UF₆ and the fluoride salts of the actinides and fission products. At process temperatures, the UF6 volatizes into a gas, and is released from the molten salt mixture. This leaves behind the actinides …

Task 1: Geodetic Monitoring Of The Yucca Mountain Region Using Continuous Global Positioning System Measurements, Jonathan Price

Publications (YM)

The principal purpose of the cooperative agreement is to develop and continue providing the public and the Yucca Mountain Site Characterization Office (YMSCO) with an independently derived, unbiased body of scientific and engineering data concerning the study of Yucca Mountain as a potential high level waste repository. Under this agreement, the University and Community College System of Nevada (UCCSN) will perform scientific or engineering research, and develop and foster collaborative working relationships between the Government and academic researchers. The following describes the objectives of Task 1 “Geodetic Monitoring of the Yucca Mountain Region Using Continuous Global Positioning System Measurements” under …

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

The goal of this project is to investigate the casting processes for metallic fuels to help design a process that minimizes the loss of the volatile actinide elements from the fuel.

The research effort centers on the development of advanced numerical models to assess conditions that significantly impact the transport of volatile actinides during the melt casting process and represents a joint effort between researchers at the University of Nevada, Las Vegas (UNLV) and Argonne National Laboratory (ANL).

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The goal of this research project is to provide technical support to process designers working on the development of the fuel cycles for transmutation applications. Detailed process models are developed to better define the impact of fuel choice on the transmuter fuel cycle, including relative process losses, waste generation, and plant capital cost. These process models provide insight regarding required plant size and number of plants needed to mesh with the fuel recycling line. They also determine requirements for automation.

Manufacturing models for large-scale production in a hot cell environment are also developed. Combined, these two models allow the assessment …

Design And Evaluation Of Processes For Transmuter Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

• Project Objective: examine autonomous robotic fuel fabrication processes with regard to hot cell and equipment design, operations, and costs.

• Fabrication processes for different fuel types differ in terms of equipment types, throughput, and cost.

• Design options are restricted by the requirement to employ only radiation-hardened machinery and components

• Benefit to Department of Energy: decision support for the selection of the most suitable manufacturing process.

Fish Population Dynamics During The Establishment Phase Of A Constructed Wetland, Danielle Alegre

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Wetlands Park Nature Preserve in Clark County Nevada is a constructed wetland that is home to several species of fish. The purpose of this study is to report on the fluctuations of the fish populations during the first 20 months of monitoring at the Wetlands Park Nature Preserve. This thesis analyzes the fish monitoring data in order to assess the behavior of the fish population of the Wetlands Preserve. As the environment at the Wetland has changed during its initial establishment, so has the fish population. Using data collected during the monthly monitoring protocol from June 2001 to January …

Assessment Of Potential Environmental Impacts Of Nature-Based Tours Originating Within Clark County, Nevada, Beth Domowicz

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this thesis was to assess the potential magnitude of negative environmental damage of nature-based tours originating in Clark County, Nevada. An ordinal ranking system was used for assessment of five variables. These variables were resource use, noise pollution, soil degradation, vegetation degradation, and wildlife disturbance. There were two proposed answers. The first was that as distance increased, negative tour impact would increase. This was not supported, since tours had high impacts for destinations that were close by and far away. The second was that most tours were not causing high damage to the environment. This hypothesis was …

Scientific And Engineering Studies Of Systems, Structures, And Components Important To Safety For A Potential Repository At Yucca Mountain, Nevada, Ian Buckle, E. Manos Maragakis

Publications (YM)

TASK 26: Upgrade of Earthquake Simulation Facilities in the Large-Scale Structures Laboratory at University of Nevada Reno The objective of this Task was to purchase, install and commission the equipment necessary to upgrade two existing shake tables in the Structures Laboratory at UNR, from uniaxial to biaxial motion. It was recognized that a parallel effort, funded by NSF and HUD, to add a third biaxial table with identical properties to the upgraded existing tables, would be undertaken at the same time.

Immobilization Of Fission Iodine By Reaction With A Fullerene Containing Carbon Compound And Insoluble Natural Organic Matrix: Quarterly Report September-December 2002, Spencer M. Steinberg

Separations Campaign (TRP)

The recovery of iodine released during the processing of used nuclear fuel poses a significant challenge to the transmutation of radioactive iodine. This proposal will develop and examine the use of Fullerene Containing Carbon (FCC) compounds as potential sorbents for iodine release from the reprocessing of nuclear fuel. This work will also include the development of bench-scale testing capabilities at UNLV to allow the testing of the FCC material in a simulated process off-gas environment. This experimental capability will also be used to test other potential sorbtion materials and processes, such as natural organic matter (NOM) and other promising alternatives. …

Investigation Of The Corrosion Of Steel By Lead-Bismuth Eutectic (Lbe) Using Scanning Electron Microscopy And X-Ray Photoelectron Spectroscopy, Daniel Koury

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lead Bismuth Eutectic (LBE) has been proposed for use in programs for accelerator transmutation of waste. LBE is the leading candidate material as a spallation target and an option for the sub-critical blanket coolant. The corrosion of 316 and 316L stainless steels by LBE has been studied using UNLV's facilities for Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). We have compared exposed and unexposed samples and studied the differences. Some amount of surface contamination is present on the samples and has been removed by ionbeam etching. The unexposed samples reveal typical stainless steel characteristics: a chromium oxide passivation …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 8/16/02- 11/15/02, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral …

Corrosion Of Steel By Lead Bismuth Eutectic: Quarterly Report August September October 2002, John Farley

Transmutation Sciences Materials (TRP)

We continued with sputter depth profiling of 316 and 316L steel samples that have been exposed to LBE. We also calibrated the sputter depth profiling using a sample of SiO₂ on Si, and the SEM. This is a valuable independent determination of the thickness of oxide layers.

In the laboratory, progress continues using the XPS machine. Experiments have been performed on steel samples using Argon ions to mill away the surface of the sample, thereby making measurements as a function of depth. This "ion beam milling" proceeds slowly through the oxide layer that covers the steel sample. We are …

Fragmentation Processes Following Core Excitation In Acetylene And Ethylene By Partial Ion Yield Spectroscopy, Maria Novella Piancastelli, Wayne C. Stolte, Gunnar Ohrwall, S-W Yu, D. Bull, K. Lantz, Alfred S. Schlachter, Dennis W. Lindle

Chemistry and Biochemistry Faculty Research

Partial ion yield spectroscopy provides a very detailed picture of fragmentation processes following core excitation in isolated molecules. We exploit this potential in the analysis of decay processes following C1s→π and C1s→Rydberg excitations in ethylene and acetylene. We show that the relative intensity of spectral features related to the excitation to empty molecular orbitals or to Rydberg states is a function of the time variation of the fragmentation process. Namely, we see an intensity increase in the Rydberg states compared to the molecular orbitals as the fragmentation process becomes more extensive, a result attributable to the diffuse nature of the …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (Aug. 01 – Oct. 31, 2002), Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

After two month intensive work in LANL, some preliminary sensor calibration curves have been obtained. Further data analysis shall be performed to assess the theoretical and measured data. Also, a new experimental apparatus shall be designed and located in UNLV to continue the left work.

Technical Progress:

• A set of calibration curves of voltage vs. temperature ranging from 300⁰C to 500⁰C under various oxygen concentrations in liquid LBE for the YSZ oxygen sensor has been obtained and has been reported in one paper.

• A meeting with LBE committee and other faculty members in AAA …

University Of Nevada, Las Vegas Advanced Accelerator Applications University Participation Program: Quarterly Report, First Quarter Year 2 (March 2002 To May 2002), Anthony Hechanova

Transmutation Research Program Reports (TRP)

This Quarterly Report is a primary deliverable from the University of Nevada, Las Vegas (UNLV) Advanced Accelerator Applications (AAA) University Participation Program (UPP) Director to the U.S. Department of Energy (DOE) as described in the UNLV AAA proposal, and Statement of Work for the First Quarter Year 2 and AAA FY02 Work Package.

The UNLV AAA UPP Director implements the program’s administration using staff from the Harry Reid Center for Environmental Studies (HRC) to ensure that work conducted under the UNLV AAA UPP meets program objectives. The UNLV AAA program consists of four components: Program Support, Research Infrastructure Augmentation, International …

University Of Nevada, Las Vegas Advanced Accelerator Applications University Participation Program: Quarterly Report, Third Quarter Year 2 (Sept. 2002 To Nov. 2002), Anthony Hechanova

Transmutation Research Program Reports (TRP)

This Quarterly Report is a primary deliverable from the University of Nevada, Las Vegas (UNLV) Advanced Accelerator Applications (AAA) University Participation Program (UPP) Director to the U.S. Department of Energy (DOE) as described in the UNLV AAA proposal and Statement of Work for the Fourth Quarter.

The UNLV AAA UPP Director implements the program’s administration using staff from the Harry Reid Center for Environmental Studies (HRC) to ensure that work conducted under the UNLV AAA UPP meets program objectives. The UNLV AAA program consists of three components: Program Support, Research Infrastructure Augmentation, and Student Research.

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Annual Progress Report (September 2001 – August 2002), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. Very little data exist in the open literature on the tensile properties of this alloy. The test material will be thermally treated prior to the evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by surface …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

The AAA program is developing technology for the transmutation of nuclear waste to address many of the long-term disposal issues. An integral part of this program is the proposed chemical separations scheme. This process, as envisioned by Argonne National Laboratory (ANL) researchers, will be outlined later in this report.

Nearly all issues related to risks to future generations arising from long-term disposal of such spent nuclear fuel is attributable to ~1% of its content. This 1% is made up primarily of plutonium, neptunium, americium, and curium (the transuranic elements) and long-lived isotopes of iodine and technetium created as products from …

Preliminary Geochemical Evaluation Of Groundwaters From Wells Of The Nye County Early Warning Drilling Program, Irene Farnham, Klaus J. Stetzenbach, Amy J. Smiecinski

Publications (YM)

As part of the Yucca Mountain Oversight program, the Nye County Nuclear Waste Repository Project Office (NWRPO) has established a groundwater monitoring program to protect groundwater resources for the residents of Nye County in Amargosa and Pahrump Valleys. This groundwater monitoring program, referred to as the Nye County Early Warning Drilling Program (NCEWDP), involves drilling a series of wells down-gradient from Yucca Mountain for long term groundwater monitoring and also to provide much needed geologic and hydrologic information in this area. A comprehensive database of aquifer parameters in the alluvial, volcanic, and carbonate aquifers down-gradient hydrogeologically of Yucca Mountain is …

Holographic Analysis Of Diffraction Structure Factors, S. Marchesini, N. Mannella, C. S. Fadley, M. A. Van Hove, J. J. Bucher, D. K. Shuh, L. Fabris, M. J. Press, M. W. West, Wayne C. Stolte, Z. Hussain

Chemistry and Biochemistry Faculty Research

We combine the theory of inside-source/inside-detector x-ray fluorescence holography and Kossel lines/x ray standing waves in kinematic approximation to directly obtain the phases of the diffraction structure factors. The influence of Kossel lines and standing waves on holography is also discussed. We obtain partial phase determination from experimental data obtaining the sign of the real part of the structure factor for several reciprocal lattice vectors of a vanadium crystal.

Radiation Transport Modeling Of Beam-Target Experiments For The Aaa Project: Quaterly Report, June 01- August 31, 2002, William Culbreth

Reactor Campaign (TRP)

The national development of technology to transmute nuclear waste depends upon the generation of high-energy neutrons produced by proton spallation. Proton accelerators, such as LANSCE at the Los Alamos National Laboratory, are capable of producing 800 MeV protons. By bombarding a lead /bismuth target, each proton may generate up to 25 neutrons that can activate fission of transuranic isotopes. Students at UNLV have been involved in radiation transport calculations in collaboration with researchers at the Los Alamos National Laboratory and at the Argonne National Laboratory.

Hydrogen-Induced Embrittlement Of Candidate Target Materials For Applications In Spallation-Neutron-Target Systems: Quarterly Progress Report (June 01 – August 31, 2002), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate target materials for applications in spallation-neutron-target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The materials selected for evaluation and characterization are martensitic stainless steels including Alloy HT-9, Alloy EP 823 and Type 422 stainless steel. The susceptibility to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) of these materials are being evaluated in environments of interest using tensile specimens under constant load and slow-strain-rate (SSR) conditions. Further, the localized corrosion behavior of these alloys …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (June 1 – August 31, 2002), Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada Las Vegas (UNLV), the Idaho State University (ISU), and the Los Alamos National Laboratory (LANL) is to evaluate the feasibility of determining residual stresses in cold-worked, plastically-deformed, and welded materials using a nondestructive method based on positron annihilation spectroscopy. This technique uses γ-rays from a small MeV electron Linac to generate positrons inside the sample via pair production. This method is known to have capabilities of characterizing defects in thick specimens, that could not be accomplished by conventional positron technique or other nondestructive methods. The generated data will …

Design And Evaluation Of Processes For Fuel Fabrication: Year 1 Final Report, Georg F. Mauer

Fuels Campaign (TRP)

The project objective is the design and evaluation of manufacturing processes for transmuter fuel fabrication. The large-scale deployment of remote fabrication and refabrication processes will be required for all transmutation scenarios. Current program emphasis is on a five-year effort to determine the feasibility of transmutation as a technology to limit the need for repository storage of spent commercial fuel. The evaluation of the fabrication processes will create a decision support data base to document design, operations, and costs. Fabrication processes required for different fuel types differ in terms of equipment types, throughput, and cost. The year 1 project was focused …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Final Report -Phase I 09/01/2001-08/30/2002, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 5/16/02- 8/15/02, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

Two activities are proposed in this Phase I task: the development of systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Progress Report 5/16/02- 8/15/02, Yitung Chen, Randy Clarksean, Darrell Pepper

Fuels Campaign (TRP)

An important aspect of the Advanced Accelerator Applications (AAA) program is the development of a casting process by which volatile actinide element (i.e., americium) can be incorporated into metallic alloy fuel pins. The traditional metal fuel casting process uses an inductively heated crucible.

This process works well for the fabrication of metal fuel pins traditionally composed of alloys of uranium and plutonium, but does not work well when highly volatile actinides are included in the melt. The problem occurs both during the extended time period required to superheat the alloy melt as well as when the chamber must be evacuated. …

Red Rock Desert Learning Center & Wild Horse And Burro Facility: Oliver Ranch Feasibility Study, Yosemite National Institutes

Oliver Ranch Project

Yosemite National Institutes, a private, non-profit national environmental education leader, has been running successful residential science programs in national parks for 30 years in partnership with the National Park Service. The mission of YNI is to provide educational adventures in nature's classroom to inspire a personal connection to the natural world and responsible actions to sustain it. Early in 2000 in Las Vegas, a new organization, the Outside Las Vegas Foundation (OLVF), was forming. The OLVF is dedicated to preserving the federal public lands surrounding Las Vegas, enriching the experience of its visitors, enhancing the quality of life for local …