Physical Sciences and Mathematics Commons^™

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

There is an active international interest in lead-bismuth eutectic and similar liquid lead systems because of the relevance to the transmutation of nuclear waste, fast reactors, and spallation neutron sources. A successful program in nuclear waste processing that includes transmutation in accelerator-driven systems and fast reactors, would significantly decrease the space requirements for geological repositories.

Materials in these systems must be able to tolerate high neutron fluxes, high temperatures, and chemical corrosion. For lead bismuth eutectic (LBE) systems, there is an additional challenge because the corrosive behaviors of materials in LBE are not well understood. Most of the available information …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the effect of environmental and mechanical parameters on environment induced degradations of candidate target structural materials for applications in spallation-neutron-target systems, such as accelerator-driven systems for the transmutation of waste. The materials selected for evaluation and characterization are martensitic stainless steels including Alloys HT-9, EP-823 and Type 422 stainless steel (SS).

More recently, this experimental program has been expanded to evaluate the effect of molten lead-bismuth eutectic (LBE) on the corrosion behavior of target structural materials in the presence of oxygen. Since the Materials Performance Laboratory (MPL) at UNLV currently cannot …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The corrosion of structural materials is a major concern for the use of lead-bismuth eutectic (LBE) systems for nuclear applications such as in transmuter targets or fast reactors. Corrosion in liquid metal systems can occur through various processes, including, for example, dissolution, formation of inter-metallic compounds at the interface, and penetration of liquid metal along grain boundaries. Predicting the rate of these processes depends on numerous system operational factors: temperature, system geometry, thermal gradients, solid and liquid compositions, and velocity of the liquid metal, to name a few. Corrosion, along with mechanical and/or hydraulic factors, often contributes to component failure. …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The focus of this work is to determine the effect of elevated temperatures on the tensile properties of Alloy EP-823 and other martensitic alloys having similar compositions. The information obtained through this work describing the mechanism of elevated-temperature deformation will assist in developing suitable target structural materials possessing enhanced LBE corrosion resistance at process temperatures, allowing the continued development and eventual deployment of these technologies.

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic, Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

Lead-bismuth eutectic (LBE) is a candidate as a spallation target in sub-critical transmutation systems and as a coolant in nuclear programs. One of the primary concerns with LBE systems is the corrosion of stainless steel, the primary structural material used in nuclear systems. To mitigate this problem, trace levels of oxygen can be introduced into the system, causing the formation of a protective oxide layer at the interface between the LBE and steel. To protect the steel components, this oxide layer must be properly maintained. However, too much oxygen will produce unwanted oxide precipitation within the coolant and elsewhere in …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements, Ajit K. Roy

Transmutation Sciences Materials (TRP)

Metals and alloys, when subjected to tensile loading beyond a limiting value, can undergo plastic deformation resulting in lattice defects such as voids and dislocations. These imperfections may interact with the crystal lattice, producing a higher state of internal stresses characterized by reduced ductility. Residual stresses can also be generated in welded structures due to rapid rate of solidification, and dissimilar metallurgical microstructures between the weld and the base metals. Premature failures can be experienced in engineering metals and alloys due to the presence of these residual stresses. Specific thermal treatments commonly known as stress relief operations can relieve these …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications: Quaterly Report, Biswajit Das

Transmutation Sciences Materials (TRP)

During the past quarter, this project employed one graduate student and two undergraduate student researchers and made the following accomplishments :

• Acquisition of steel samples for experiments

• Design and fabrication of specialized anodization apparatus to accommodate steel samples

• Investigation of adhesiveness of aluminum on steel

• Investigation of effects of anodizing acids on steel to identify most appropriate acid and a suitable barrier material

Stress Corrosion Cracking Of Target Material, Mohammad K. Hossain

Transmutation Sciences Materials (TRP)

The primary objective of this paper is to evaluate the effect of hydrogen on environment assisted cracking of candidate target materials for transmutation applications. Transmutation refers to transformation of long-lived actinides and fission products from spent nuclear fuels (SNF), and occurs when the nucleus of an atom changes because of natural radioactive decay, nuclear fission, nuclear fusion, neutron capture, or other related processes. Martensitic Alloy EP 823 was selected to be the candidate alloy for this investigation. During the initial phase, the stress corrosion cracking (SCC) behavior of this alloy was evaluated in neutral (pH: 6-7) and acidic (pH: 2-3) …

Development Of Dose Coefficients For Radionuclides Produced In Spallation Targets, Phillip W. Patton, Mark Rudin

Transmutation Sciences Physics (TRP)

Dose coefficients permit simple determination of radiation dose associated with various exposure scenarios, and ultimately permit radiation safety personnel to assess the health risks to workers in a nuclear facility. Specifically, radiation safety personnel use dose coefficients to determine the radiation dose incurred to a tissue or organ system from a given exposure. These parameters are often expressed in terms of Annual Limits on Intake (ALIs) and Derived Air Concentrations (DACs).

Results from this study will be used to produce ALIs and DACs for these rare radionuclides created by spallation target systems that are not included in Federal Guidance Report …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Sean Hsieh

Separations Campaign (TRP)

The chemical processing of used nuclear fuel is an integral component of any strategy for the transmutation of nuclear waste. Due to the large volume of material that must be handled in this first step of the transmutation process, the efficiency of the separations process is a key factor in the potential economic viability of the transmutation strategies. The ability to optimize the chemical separation systems is vital to ensure the feasibility of the transmutation program.

Systems analysis, or total systems modeling, is one of the strongest tools available to researchers for understanding and optimizing complex systems such as chemical …

Nuclear Criticality, Shielding, And Thermal Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth

Separations Campaign (TRP)

The first step in any transmutation strategy is the separation of radionuclides in used nuclear fuel. The current separation strategy supporting the Advanced Fuel Cycle Initiative (AFCI) program is based on the use of a solvent extraction separation process to separate the actinides, fission products, and uranium from used commercial nuclear fuel, and on the use of pyrochemical separation technologies to process used transmuter fuels. To separate the fission products and transuranic elements from the uranium in used fuel, the national program is developing a new solvent extraction process, the Uranium Extraction Plus, or UREX+, process based on the traditional …

Development, Fabrication And Study Of Fullerene-Containing Carbon Material (Fcc) For Immobilization Of Iodine: Progress Reports 1-1 And 1-2, Michael Savopulo, Boris E. Burakov

Separations Campaign (TRP)

Immobilization of highly radioactive and long-lived isotope of ¹²⁹I, which is a fission product in spent nuclear fuel, requires development of new durable host-materials. Such materials should be characterized with the following principal features:

• High loading capacity to iodine incorporation
• Chemical durability and radiation resistance in order to prevent iodine release over long time (higher than 105 years) storage under conditions of underground repository of radioactive wastes
• Possibility to use iodine-doped material as a target for iodine transmutation.

Iodine is a very volatile chemical element, and even its chemically strong compounds such as AgI and CuI are not stable …

Development, Fabrication And Study Of Fullerene-Containing Carbon Material (Fcc) For Immobilization Of Iodine: Progress Report 1-3, Michael Savopulo, Boris E. Burakov

Separations Campaign (TRP)

During previous reporting periods we studied properties of iodine doped FCC in comparison with activated carbon. An additional goal was to investigate the possibility to convert iodine doped FCC and activated carbon into ceramic-like material avoiding iodine loss. In order to obtain ceramic based on C_xN_y with fullerene structure we decided to carry out gamma irradiation of iodine doped samples in nitrogen atmosphere (0.7 atm. N₂). It was found that iodine doping and irradiation caused principal changes in composition of FCC such as substituting of fullerene C₆₀ and graphite (both formed by benzene-like carbon …

Development, Fabrication And Study Of Fullerene-Containing Carbon Material (Fcc) For Immobilization Of Iodine: Final Report #1, Michael Savopulo, Boris E. Burakov

Separations Campaign (TRP)

Immobilization of highly radioactive and long-lived isotope of ¹²⁹I, which is a fission product in spent nuclear fuel, requires development of new durable host-materials.

Iodine is a very volatile chemical element, and even its chemically strong compounds such as AgI and CuI are not stable under ultraviolet irradiation or oxidizing conditions. Therefore, development of host materials for iodine immobilization is based on unusual approach – the search and testing of new compounds which were not studied before in respect of iodine sorption and strong fixation.

Laboratory of Applied Mineralogy and Radiogeochemistry of the V.G. Khlopin Radium Institute carries out …

Evaluation Of Fluorapatite As A Waste-Form Material, Dennis W. Lindle, Oliver Hemmers

Separations Campaign (TRP)

Fluorapatite, fluorinated calcium phosphate, has been identified as a potential matrix for the entombment of the zirconium fluoride fission product waste stream from the proposed FLEX process. If the efficacy of fluorapatite based waste-storage can be demonstrated, then new and potentially more-efficient options for handling and separating high-level wastes, based on fluoride-salt extraction, will become feasible. This proposal is for renewal of the UNLV portion of a dual-path research project to develop a process to fabricate a synthetic fluorapatite waste form for the ZrF₄, FP waste stream, characterize the waste form, examine its performance under environmental conditions, and …

Development Of Fluorapatite As A Waste Form: Progress Report 1-2, Boris E. Burakov

Separations Campaign (TRP)

In the framework of this stage of research the samples of Sr-fluorapatite synthesized earlier had to be studied using different methods.

These are samples of the following desired compositions:

1) Sr₁₀(PO₄)₆F₂ from precipitated precursor;

2) Sr₁₀(PO₄)₆F₂ from precipitated precursor and adding Sr(NO₃)₂;

3) Sr₈CsNd(PO₄)₆F_2.3;

4) Initial precursor for the synthesis of un-doped Sr-fluorapatite.

Development Of Fluorapatite As A Waste Form: Progress Report 1-3, Boris E. Burakov

Separations Campaign (TRP)

In the framework of this stage of research we had to carry out synthesis and study of fluorapatite doped with fission product elements including Cs, Sr, noble metals and Zr. During previous reporting period different samples of ceramics based on Sr-fluorapatite have been synthesized. Sample of Cs-Nd-doped ceramic has been recognized as the most interesting for detailed examination by SEM and EMPA methods.

Development Of Fluorapatite As A Waste Form: Final Report 1, Boris E. Burakov

Separations Campaign (TRP)

Research on the apatite family of minerals to determine their suitability in the Flouride Extraction (FLEX) Process, which is part of the radioactive waste management stream.

1) KRI has fabricated and tested special high temperature furnace for fluorapatite synthesis. This equipment might be installed into glove box in order to carry out experiments with real actinides and technetium. The same equipment might be fabricated and installed in Actinide laboratory at HRC by KRI technical staff;

2) Samples of undoped polycrystalline apatite, Ca₅(PO₄)₃F, of low porosity were successfully obtained by sintering in air at 1300°C. …

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System: Quaterly Report, Kenneth Czerwinski, Byron Bennett

Separations Campaign (TRP)

The speciation of hexavalent U and tetravalent Pu will be examined in the TBP-dodecane- nitric acid systems. This topic is chosen based on data needs for separation modeling identified by the AFCI. Emphasis will be placed on studying the influence of nitrate and acetohydroxamic acid on U and Pu speciation as well as conditions where a third phase forms in the organic phase. The organic phase will be 30 % TBP in dodecane. Equal volumes of aqueous and organic phase will be used. The speciation of the actinides in the aqueous and organic phase will be determined by a number …

Performance Characteristics Of Beamline 6.3.1 From 200 Ev To 2000 Ev At The Advanced Light Source, Ponnusamy Nachimuthu, J. H. Underwood, C. D. Kemp, Eric M. Gullikson, Dennis W. Lindle, David K. Shuh, Rupert C. Perera

Chemistry and Biochemistry Faculty Research

Bend magnet beamline 6.3.1 at the Advanced Light Source operates from 200 eV to 2000 eV, primarily used for x-ray absorption fine structure investigations. The beamline optics consist of a compact, entrance-slitless, Hettrick-Underwood type variable-line-spacing plane-grating monochromator and refocusing mirrors to provide a 25 μm × 500 μm spot at the focal point in the reflectometer end station. Wavelength is scanned by the simple rotation of the grating and illuminates a fixed exit slit. The LabView based beamline control and data acquisition computer code has been implemented to provide a convenient interface to the user. The dedicated end station is …

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

The goal of this project is to investigate the casting processes for metallic fuels to help design a process that minimizes the loss of the volatile actinide elements from the fuel. The research effort centers on the development of advanced numerical models to assess conditions that significantly impact the transport of volatile actinides during the melt casting process and represents a joint effort between researchers at UNLV and Argonne National Laboratory (ANL). Assessing critical equipment and process variables is required to build a successful system that will operate efficiently.

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The goal of this research project is to provide technical support to process designers working on the development of the fuel cycles for transmutation applications. Detailed process models are developed to better define the impact of fuel choice on the transmuter fuel cycle, including relative process losses, waste generation, and plant capital cost. These process models provide insight regarding required plant size and number of plants needed to mesh with the fuel recycling line. They also determine requirements for automation.

Manufacturing models for large-scale production in a hot cell environment are also developed. Combined, these two models allow the assessment …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion, Clemens Heske

Fuels Campaign (TRP)

The goal of this project is to elucidate the chemical bonding and interface formation of metal fission products with the coating materials used in state-of-the-art TRISO fuel particles. Particular emphasis is placed on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress. Furthermore, we intend to assess the chemical state of some of the metal fission products. The findings are expected to give valuable information about failure mechanisms of TRISO particles and fission product transport. Secondly, through simulating …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 3rd Quarter Report, 2004, Clemens Heske

Fuels Campaign (TRP)

The goal of this project, which started in May 2004, is to elucidate the chemical bonding and interface formation of metal fission products with the coating materials used in state-of-the-art TRISO fuel particles. Particular emphasis is placed on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress.

In detail, this project is devoted to studying the interface formation of Pd, Ag, and Cs with SiC and pyrolytic carbon. Using the TRISO coating materials and single crystal references as …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 4th Quarter Report, 2004, Clemens Heske

Fuels Campaign (TRP)

The goal of this project, which started in May 2004, is to elucidate the chemical bonding and interface formation of metal fission products with the coating materials used in state-of-the-art TRISO fuel particles. Particular emphasis is placed on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress. In detail, this project is devoted to studying the interface formation of Pd, Ag, and Cs with SiC and pyrolytic carbon. In order to study the properties of the relevant interfaces, …

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix, Kenneth Czerwinski

Fuels Campaign (TRP)

This project will examine inert fuels containing ZrO₂ and MgO as the inert matrix, with the relative amount of MgO varied from 30% to 70% in ZrO₂. Reactor physics calculations will be used to examine suitable quantities of burnable poisons from the candidate elements Gd, Er, or Hf with reactor grade Pu providing the fissile component, with up to 10 % of ²³⁹Pu. Ceramics will be synthesized and characterized based on the reactor physics results. The solubility the fuel ceramics, in reactor conditions, reprocessing conditions, and repository conditions, will be investigated in a manner to provide …

Neutron Multiplicity Measurements Of Target/Blanket Materials, Denis Beller

Transmutation Sciences Physics (TRP)

To optimize the performance of accelerator-driven transmutation subcritical systems (ADS), engineers will need to design the system to operate with a neutron multiplication factor just below that of a critical, or self-sustaining, system. This design criterion requires particle transport codes that instill the highest level of confidence with minimal uncertainty, because larger uncertainties in the codes require larger safety margins in the design and result in a lower efficiency of the ADS transmuter. For current design efforts in the U.S., a Monte Carlo particle transport code MCNPX is used to model neutron production and transport for spallation neutron systems.

While …

Fifteen Years Of Plant Community Dynamics During A Northwest Ohio Oak Savanna Restoration, Scott R. Abella, John F. Jaeger, Lawrence G. Brewer

Public Policy and Leadership Faculty Research

Midwest oak savanna communities are noted for their unusual plant assemblages, but these communities have been reduced by more than 98% because of changing land uses and conversion to closed-canopy forests. We initiated an ongoing 15-year experiment in 1988 to restore a 40-ha black oak (Quercus velutina) savanna by applying burn treatments that historically maintained this vegetation type. Groundlayer composition changed significantly for both the burn treatment and the control, with the burn treatment exhibiting slight increases in herbs such as wild lupine (Lupinus perennis) and hairy puccoon (Lithospermum caroliniense), both of which are species requiring greater insolation. Burn treatments …

Oliver Ranch Science School Complex & Wild Horse And Burro Facility: Quarterly Progress Report, Period Ending September 30, 2004, Margaret N. Rees

Oliver Ranch Project

Assist in project coordination between numerous stakeholders such as the Clark County School System, Desert Research Institute, Community College of Southern Nevada, UNR Cooperative Extension, Nevada State College, local museums, state parks, non-profit organizations, federal agencies, and the public to ensure appropriate educational curricular activities and venues are provided for in the conceptual design of the School and the Wild Horse and Burro facility where appropriate as well as assist in the NEPA process as needed. The activities will be conducted at least in part by university faculty, staff and students as part of the university’s research, teaching, and service …

University Of Nevada, Las Vegas Transmutation Research Program Annual Report Academic Year 2003-2004, Anthony Hechanova, Elizabeth Johnson, Gary Cerefice

Transmutation Research Program Reports (TRP)

It is my pleasure to present the UNLV Transmutation Research Program’s third annual report that highlights the academic year 2003 – 2004. Supporting this document are the many technical reports and scientific papers that have been generated over the past three years.

In the third year of our program, we experienced infrastructure growth despite a decreasing budget. This past year we continued into the final phases of the initial 16 independent student research tasks started in 2001 and 2002, supporting 45 graduate students and 11 undergraduates in 6 academic departments across the UNLV scientific and engineering communities during the academic …