Physical Sciences and Mathematics Commons^™

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead Alloy Coolant Systems, Yitung Chen, Jinsuo Zhang, Huajun Chen, Jichun Li

Transmutation Sciences Materials (TRP)

In advanced nuclear energy systems, lead-alloys (e.g., lead, lead bismuth eutectic) emerge as strong candidates for transmutation and advanced reactor systems as nuclear coolants and high-power spallation neutron targets. However, it is widely recognized that corrosion of materials caused by lead-alloys presents a critical barrier to their industrial use. A few experimental research and development projects have been set up by different groups such as LANL to study the corrosion phenomena in their test facilities and to develop mitigation techniques and materials.

The goal of the proposed research project is to provide basic understanding of the protective oxide layer behaviors …

Corrosion Barrier Development For Lbe Corrosion Resistance, Biswajit Das

Transmutation Sciences Materials (TRP)

In the last quarter, a specialized sample holder was developed for the anodization of alumina on steel. In addition, it was determined that oxalic acid was the most appropriate acid for the anodization of these structures. The steel samples obtained from LANL were first cut into a number of pieces, each measuring 11mm x 8mm x 1.6mm, to allow multiple experiments. Special care was taken to ensure that the cutting process did not damage the samples. After investigation of several techniques, including laser cutting, the samples were cut using EDM wires. The cut steel pieces did not show any damage …

Corrosion Barrier Development For Lbe Corrosion Resistance: Quaterly Report, Biswajit Das

Transmutation Sciences Materials (TRP)

With the demonstration of formation of nanoporous alumina on steel and its good adhesion to substrate under thermal cycling, the next project task was to synthesize Chromium nanowires inside the alumina pores. During the previous quarter, a specialized sample holder was developed towards this goal. Various techniques for the deposition of Chromium were investigated and electro-deposition was determined to be the most suitable approach due to the large aspect ratio of the pores. A challenge in using electro-deposition for porous alumina is the potential sealing of the pores in aqueous solutions at higher temperatures. To avoid this problem, a search …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.

In parallel, lead bismuth eutectic (LBE) has emerged as a potential spallation target material for efficient production of neutrons, as well as a coolant in the accelerator system. While LBE has excellent properties as a nuclear coolant, it is also highly corrosive …

Neutron Multiplicity Measurements Of Target/Blanket Materials, Denis Beller

Transmutation Sciences Physics (TRP)

To optimize the performance of accelerator-driven sub-critical (ADS) transmutation systems, engineers will need to design the system to operate with a neutron multiplication factor just less than that of a critical, or self-sustaining, system. This design criterion requires particle transport codes that instill the highest level of confidence with minimal uncertainty, because larger uncertainties in the codes require larger safety margins in the design and result in a lower efficiency of the ADS transmuter. For current design efforts in the U.S., a Monte Carlo particle transport code MCNPX is used to model neutron production and transport for spallation neutron systems. …

Development Of Dose Coefficients For Radionuclides Produced In Spallation Targets, Phillip W. Patton, Mark Rudin

Transmutation Sciences Physics (TRP)

Dose coefficients permit simple determination of radiation dose associated with various exposure scenarios, and ultimately permit radiation safety personnel to assess the health risks to workers in a nuclear facility. Specifically, radiation safety personnel use dose coefficients to determine the radiation dose incurred to a tissue or organ system from a given exposure. These parameters are often expressed in terms of Annual Limits on Intake (ALIs) and Derived Air Concentrations (DACs).

The research consortium comprised of representatives from several universities and national laboratories has successfully generated internal and external dose conversion coefficients for twenty radionuclides produced in spallation neutron sources. …

Reactor Physics Studies For The Afci Reactor-Accelerator Coupling Experiments (Race) Project, Denis Beller

Transmutation Sciences Physics (TRP)

The specific research objective of this three-year project is to design and conduct an accelerator driven experiment at one of the Texas universities. This experiment will help demonstrate in the U.S. the ability to design, compute, and conduct ADSS experiments; and to predict and measure source importance, coupling efficiency, sub-critical reactor kinetics and source-driven transients. In addition, both steady state and transient ADSS benchmarks will be created for the nuclear community to develop and test new computational codes and methods, and the importance of a driving neutron source in various regions of different subcritical assemblies will be mapped. Experiments will …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Sean Hsieh

Separations Campaign (TRP)

The chemical processing of used nuclear fuel is an integral component of any strategy for the transmutation of nuclear waste. Due to the large volume of material that must be handled in this first step of the transmutation process, the efficiency of the separations process is a key factor in the potential economic viability of transmutation strategies. The ability to optimize the chemical separation systems is vital to ensure the feasibility of the transmutation program.

Systems analysis, or total systems modeling, is one of the strongest tools available to researchers for understanding and optimizing complex systems such as chemical separations …

Nuclear Criticality, Shielding, And Thermal Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Denis Beller

Separations Campaign (TRP)

The first step in any transmutation strategy is the separation of radionuclides in used nuclear fuel. The current separation strategy supporting the Advanced Fuel Cycle Initiative (AFCI) program is based on the use of a solvent extraction separation process to separate the actinides, fission products, and uranium from used commercial nuclear fuel, and on the use of pyrochemical separation technologies to process used transmuter fuels. To separate the fission products and transuranic elements from the uranium in used fuel, the national program is developing a new solvent extraction process, the Uranium Extraction Plus, or UREX+, process based on the traditional …

Immobilization Of Fission Iodine By Reaction With A Fullerene Containing Carbon Compound And Insoluble Natural Matrix, Spencer M. Steinberg, Gary Cerefice, David W. Emerson

Separations Campaign (TRP)

The recovery of iodine released during the processing of used nuclear fuel poses a significant challenge to the transmutation of nuclear waste. Iodine-129, a long-lived fission product formed by both commercial nuclear power generation and nuclear weapons production, is released when reprocessing nuclear fuel. Since iodine can be concentrated in the human thyroid, any uncontrolled release of iodine may result in an increased rate of thyroid cancer in the exposed population. For this reason, recovery of iodine is important for implementing any nuclear transmutation strategy.

The stability of the association of iodine with FCC and NOM products are studied. Product …

Development, Fabrication And Study Of Fullerene-Containing Carbon Material (Fcc) For Immobilization Of Iodine: Progress Report #1-4, Michael Savopulo, Boris E. Burakov

Separations Campaign (TRP)

During current reporting period the experiments on synthesis of ceramic-like material by conversion of iodine-doped FCC and activated carbon to Si_xC_y have been completed. Cold pressed granules of FCC and activated carbon were rinsed in water-ethanol solution of tetraethoxysilane (TEOS), Si(OC₂H₅)₄, and then used for further synthesis. All new samples obtained have been studied using precise powder XRD analysis.

Development, Fabrication And Study Of Fullerene-Containing Carbon Material (Fcc) For Immobilization Of Iodine: Final Report 2005, Michael Savopulo, Boris E. Burakov

Separations Campaign (TRP)

Immobilization of highly radioactive and long-lived isotope of ¹²⁹I, which is a fission product in spent nuclear fuel, requires development of new durable host-materials.

Iodine is a very volatile chemical element, and even its chemically strong compounds such as AgI and CuI are not stable under ultraviolet irradiation or oxidizing conditions. Therefore, development of host materials for iodine immobilization is based on unusual approach – the search and testing of new compounds which were not studied before in respect of iodine sorption and strong fixation.

Although FCC material demonstrated high loading capacity to iodine sorption it is necessary to …

Evaluation Of Fluorapatite As A Waste-Form Material, Dennis W. Lindle, Oliver Hemmers, Dale L. Perry

Separations Campaign (TRP)

Argonne National Laboratory has proposed a new extraction procedure to handle TRISO-coated fuels, the Fluoride Extraction Process, or FLEX. The FLEX process is designed to separate the uranium in the fuel from the actinides and most fission products by taking advantage of the unique properties of uranium hexafluoride (UF₆). In the FLEX process, the used TRISO fuel is reacted with zirconium fluoride salt, forming UF₆ and the fluoride salts of the actinides and fission products. At process temperatures, the UF₆ volatizes into a gas, and is released from the molten salt mixture. This leaves behind the …

Development Of Fluorapatite As A Waste Form: Final Report #280204-1, Boris E. Burakov

Separations Campaign (TRP)

In the framework of Agreement #280204 (first year) it was necessary to review methods of apatite synthesis; identify optimal procedure of precursor preparation; obtain and study first fluorapatite samples. Although, some apatite-based ceramics were successfully synthesized using co-precipitated precursors and sintering method, there are still a lot of uncertainties related to optimal apatite doping with different radionuclides and non-radioactive elements. It is necessary to provide complete incorporation of waste elements into apatite crystalline structure avoiding formation of separate phases of radionuclides. Also, it is important to note that real waste streams might contain radionuclides with essentially different chemical features such …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The major objective is to create a framework that combines all the strengths of AMUSE’s complicated calculations, well established commercial system process package such as ASPENPLUS, HYSYS and PRO/II and TRPSEMPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process experience at Argonne National Laboratory and in collaboration with the NCACM.

The major activities of the task are the following:

• Develop a framework for simulating the SFTF process using AMUSE code, commercial process package, such as ASPEN- PLUS, and system engineering model.
• Develop a middleware package that can communicate between the …

Electrochemical Separation Of Curium And Americium, David W. Hatchett, Kenneth Czerwinski

Separations Campaign (TRP)

The objective of this project is to use electrochemical techniques to develop a thermodynamic understanding of actinide and lanthanide species in aqueous solution and use this data to effectively separate species with very similar chemical properties. In consultation with our DOE collaborator, electrochemical methods and materials will be evaluated and used to exploit the thermodynamic differences between similar chemical species enhancing our ability to selectively target and sequester individual species from mixtures.

The following were specific goals for this year:

• To develop a fundamental understanding of the thermodynamic properties of actinide and lanthanide species such as Cm, Am, Ce, Nd, …

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System: Quarterly Report, Kenneth Czerwinski, Cynthia-May Gong, Amber Wright

Separations Campaign (TRP)

The speciation of hexavalent U and tetravalent Pu will be examined in the TBPdodecane- nitric acid systems. This topic is chosen based on data needs for separation modeling identified by the AFCI. Emphasis will be placed on studying the influence of nitrate and acetohydroxamic acid on U and Pu speciation as well as conditions where a third phase forms in the organic phase. The organic phase will be 30 % TBP in dodecane. Equal volumes of aqueous and organic phase will be used. The speciation of the actinides in the aqueous and organic phase will be determined by a number …

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System, Kenneth Czerwinski, Byron Bennett

Separations Campaign (TRP)

The research objectives of this project are as follows:

• To determine the influence of nitrate on the speciation of U and Pu in the TBP-dodecane-nitric acid system. The aqueous and organic speciation of U and Pu are examined as a function of the nitric acid concentration, nitrate concentration (by the addition of NaNO₃), actinide ion concentration, temperature, and time.
• To determine the speciation of U and Pu with AHA in the presence and absence of TBP-dodecane organic phase. The aqueous and organic speciation of U and Pu are evaluated as a function of AHA concentration, metal ion concentration, …

Forever Earth Program: An Overview, Public Lands Institute

Presentations (DM)

• Education
• Scientific studies and research
• Water quality monitoring
• Command post activities

Discover Mojave Outdoor World: Open House, Public Lands Institute

Presentations (DM)

Increase the connection of urban youth to the natural world and our public lands through discovery, recreation, and education.

Assessing “Discover Mojave” Instrument Development And Analysis, Lori Olafson, Gregory Schraw, Jeanne A. Klockow

Reports (DM)

We developed a comprehensive assessment plan and tested the curriculum to determine whether hands-on outdoor recreation events promote knowledge, attitudes, and performance among at-risk urban children. Knowledge, attitude, and performance assessments were developed, refined and conducted through various stages based on cultural and language barriers as well a variety of age groups participating within the events. Findings revealed that knowledge, attitudes, and performance increased substantially as a result of participating in the outdoor recreation events. We conclude that the implementation and assessment of the program is strong. We also make several recommendations for future programs.

Education About The Environment Discover Mojave Programs, Public Lands Institute

Presentations (PLI Education)

Increases people’s knowledge and awareness about the environment and associated challenges, develops the necessary skills and expertise to address the challenges, and fosters attitudes, motivations, and commitments to make informed decisions and take responsible action” (UNESCO, Tbilisi Declaration, 1978)

Science In The Community: A Look At Informal Science Organizations In Clark County, Public Lands Institute

Presentations (PLI Education)

UNLV’s Public Lands Institute is partnering with area-wide Informal Science Organizations to provide experiences that can have significant and lasting impacts on student learning.

Anion And Cation-Yield Spectroscopy Of Core-Excited Sf6, Maria Novella Piancastelli, Wayne C. Stolte, Renaud Guillemin, A. Wolska, M. M. Sant'anna, Dennis W. Lindle

Chemistry and Biochemistry Faculty Research

We report an extensive study on total and partial-ion-yield spectroscopy around both the S 2p and F 1s thresholds in SF₆. All positive and negative single-ion channels have been measured. Below the F 1s threshold we detect a large variation in relative intensity of the resonant structures according to the specific channel monitored, indicating selective fragmentation. Above threshold, at variance with previous cases described by us, we detect high-intensity structures related to shape resonances not only in the cation channels but also for the anions. We discuss the applicability and limits of a model we …

Water Element Of The Las Vegas 2020 Master Plan, City Of Las Vegas, Nevada

Publications (WR)

Development in the city of Las Vegas is guided by the goals, objectives and policies outlined in the 2020 Master Plan, and elements of the Plan such as the Public Safety Element, which contain goals and policies designed to protect and enhance groundwater drainage. Additionally, the city of Las Vegas Strategic Plan has the following goals, strategies, and performance measures: Goal: Encourage conservation and optimization of natural resources. Strategy: Identify appropriate water conservation strategies and priorities. Strategy: Explore best development and urban design practices for environmental stewardship, energy and water conservation, and efficient use of the land. Performance Measure: Adoption …

2005- 2008 Unlv Mcnair Journal, Valerie Avery, Shana Bachus, Karmen K. Boehlke, Andrea Flores, Alden Kelly, Erick Lopez, Carol Preussler, Heather Shay, Ava Bookatz, Shaun Elsasser, Veronica Hicks, Shaida A. Jetha, Anthony Quinn, Thurithabhani Seneviratne, Teddy Boado Sim Jr., Liza Ward, Amris Henry-Rodgers, Jacquelynn Kaaa-Logan, Jason Orozco, Juan C. Plata, Bonnie Bartlett, Kathleen Bell, Vacheral M. Carter, Nydia Diaz, Kimberly Hackstock, Julio A. Luna, Charles Mao, Sandra Ramos, Precious Rideout, Benjamin Lee Watrous, Chet R. Whitley

McNair Journal

Journal articles based on research conducted by undergraduate students in the McNair Scholars Program

Table of Contents

Biography of Dr. Ronald E. McNair

Statements:

Dr. Neal J. Smatresk, UNLV President

Dr. Juanita P. Fain, Vice President of Student Affairs

Dr. William W. Sullivan, Associate Vice President for Retention and Outreach

Mr. Keith Rogers, Deputy Executive Director of the Center for Academic Enrichment and Outreach

McNair Scholars Institute Staff

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

The goal of this project is to investigate the casting processes for metallic fuels to help design a process that minimizes the loss of the volatile actinide elements from the fuel. The research effort centers on the development of advanced numerical models to assess conditions that significantly impact the transport of volatile actinides during the melt casting process and represents a joint effort between researchers at UNLV and Argonne National Laboratory (ANL). Assessing critical equipment and process variables is required to build a successful system that will operate efficiently.

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The goal of this research project was to provide technical support to process designers working on the development of the fuel cycles for transmutation applications. Detailed process models were developed to better define the impact of fuel choice on the transmuter fuel cycle, including relative process losses, waste generation, and plant capital cost. These process models provide insight regarding required plant size and number of plants needed to mesh with the fuel recycling line. They also determine requirements for automation.

Manufacturing models for large-scale production in a hot cell environment were also developed. Combined, these two models allow the assessment …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 2nd Quarter Report, 2005, Clemens Heske

Fuels Campaign (TRP)

The goal of our project is to investigate interface corrosion processes in TRISO nuclear fuel particles. For this purpose, we are undertaking a detailed study of the interface formation between potential candidates for metallic fission products (Pd, Ag, and Cs), likely to diffuse from the kernel of the TRISO particles, with the TRISO coating layers. As a starting point, we are investigating the Pd/SiC interface and will extend our studies to Ag/SiC during our current summer research campaign. The experimental approach comprises the preparation of metal/SiC interfaces in-situ in our ultra-high vacuum system by electron-beam deposition. In order to understand …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 1st Quarter Report, 2005, Clemens Heske

Fuels Campaign (TRP)

In this project we utilize a combination of state-of-the-art soft X-ray spectroscopies to understand the chemical bonding between metal fission products (Pd and Ag) with coating layers in TRISO fuel particles (SiC and pyrocarbon). We are primarily focusing on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress. In the current first project year, we are beginning these investigations with the Pd/SiC interface, as discussed in the previous two quarterly reports. Our first experiments (both using our lab …