Pharmaceutics and Drug Design Commons^™

Targeted Drug Delivery: Investigating Protein Corona Behavior, Atharva Markale

Theses

Due to high specificity and less toxicity, nanoparticles have become promising for targeted drug delivery against cancer, although they face challenges when they enter the bloodstream, making their behavior unpredictable. The deposition of proteins on nanoparticles, the protein corona, changes their biosignature, affecting their circulation, drug release potency, targeting ability, and immunogenicity. The continuous exchange of protein layers on a nanoscale is complex to analyze.

Nanoparticle tracking analysis (NTA) is a method to characterize nanoparticles in blood plasma by combining principles of light scattering microscopy and Brownian motion. In this work, time-dependent experiments with plasma were conducted to analyze the …

Nanoparticles For Applications In Specific Diagnostics And Precision Medicine, Naxhije Berisha

Dissertations, Theses, and Capstone Projects

Heterogeneity is common in the expression of cancer and treatment response. Precision medicine enables healthcare providers to tailor medical care to an individual's distinct genetic and environmental makeup. This customization has the potential to result in more efficient treatments while minimizing side effects. We believe that by studying the interface of nanotechnology and cancer medicine we can elucidate innovative solutions that address the challenges of disease heterogeneity. This includes advancements in drug delivery, formulations development, and diagnostic sensing. We highlight three studies that use nanotechnology for applications in precision medicine. In Chapter 2, we highlight design optimization of drug formulations …

A Detailed Parameter Study Into The Dermal Absorption Of Chemical Warfare Agents And The Effects Of Pharmacokinetics, Koko Lear

Theses

Chemical warfare agents (CWAs) are substances of varying toxicity profiles. These chemicals exhibit complex dynamics and pose a serious health risk when released into the environment. A mathematical model based on Fick’s second law of diffusion was developed to comprehend how these compounds were absorbed into the skin. The analysis applied to both small and large doses and, successfully, predicted experimental results. This work also includes the effects of CWA physicochemical properties on evaporation and dermal absorption through the stratum corneum. A sensitivity analysis was conducted to assess the impacts of small variations in the initial dose, environmental conditions, and …

Effect Of 3d Printed Tablet Shape On Drug Release Profile, Christina Gedeon

Theses

There is a growing interest in utilizing additive manufacturing (AM) as a manufacturing tool to develop oral tablets for personalized medicine. This ultimate goal in mind, this study explores the feasibility of extrusion-based fused deposition modeling (FDM) to 3D print oral tablets with tunable design to control drug release profile. Tablets are printed using poly(vinyl alcohol) (PVA) loaded with model drugs: acetaminophen and caffeine. Hot melt extrusion (HME) is used to fabricate PVA filaments loaded with acetaminophen and caffeine. These filaments are used to fabricate a range of tablets with varying designs to prepare immediate and delayed release tablets. Thermal …

Iron-Containing Nanoparticles For The Treatment Of Chrionic Biofilm Infections In Cystic Fibrosis, Leisha M. A. Martin

Nanoscience and Microsystems ETDs

Cystic fibrosis (CF) is the most common genetic disease resulting in the morbidity and mortality of Caucasian children and adults worldwide. Due to a genetic mutation resulting in malfunction of the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein, CF patients produce highly viscous mucus in their respiratory tract. This leads to impairment of the mucociliary clearance of inhaled microbes. In addition to reduced microbial clearance, anoxic environmental conditions in the lungs promote biofilm-mode growth of the pathogenic bacterial species Pseudomonas aeruginosa. Chronic infections of P. aeruginosa begin in early childhood and typically persist until respiratory failure and death result. The …

Towards The Rational Design And Application Of Polymers For Gene Therapy: Internalization And Intracellular Fate, Landon Alexander Mott

Theses and Dissertations--Chemical and Materials Engineering

Gene therapy is an approach for the treatment of acquired cancers, infectious disease, degenerative disease, and inherited genetic indications. Developments in the fields of immunotherapies and CRISPR/Cas9 genome editing are revitalizing the efforts to move gene therapy to the forefront of modern medicine. However, slow progress and poor clinical outcomes have plagued the field due to regulatory and safety concerns associated with the flagship delivery vector, the recombinant virus. Immunogenicity and poor transduction in certain cell types severely limits the utility of viruses as a delivery agent of nucleic acids. As a result, significant efforts are being made to develop …

Radical Social Ecology As Deep Pragmatism: A Call To The Abolition Of Systemic Dissonance And The Minimization Of Entropic Chaos, Arielle Brender

Student Theses 2015-Present

This paper aims to shed light on the dissonance caused by the superimposition of Dominant Human Systems on Natural Systems. I highlight the synthetic nature of Dominant Human Systems as egoic and linguistic phenomenon manufactured by a mere portion of the human population, which renders them inherently oppressive unto peoples and landscapes whose wisdom were barred from the design process. In pursuing a radical pragmatic approach to mending the simultaneous oppression and destruction of the human being and the earth, I highlight the necessity of minimizing entropic chaos caused by excess energy expenditure, an essential feature of systems that aim …

Design And Analysis Of Curcumin Conjugated Poly(Beta-Amino Ester) Networks For Controlled Release In Oxidative Stress Environments, Carolyn T. Jordan

Theses and Dissertations--Chemical and Materials Engineering

Oxidative stress, the imbalance of free radical generation with antioxidant defenses, leads to cellular inflammation, apoptosis and cell death. This compromised environment results in debilitating diseases, such as oral mucositis (OM), atherosclerosis, and ischemia/reperfusion injury. Antioxidant therapeutics has been a proposed strategy to ameliorate these imbalances and maintain homeostatic environments. However, the success of these approaches, specifically curcumin, has been limited due to characteristics such as hydrophobicity and high reactivity when released as bolus doses to contest to oxidative stress induced diseases. The development of a controlled release system to aid in protection of the antioxidant capacity of curcumin, as …

The Development Of Microfluidic Devices For The Production Of Safe And Effective Non-Viral Gene Delivery Vectors, Jason Matthew Absher

Theses and Dissertations--Chemical and Materials Engineering

Including inherited genetic diseases, like lipoprotein lipase deficiency, and acquired diseases, such as cancer and HIV, gene therapy has the potential to treat or cure afflicted people by driving an affected cell to produce a therapeutic protein. Using primarily viral vectors, gene therapies are involved in a number of ongoing clinical trials and have already been approved by multiple international regulatory drug administrations for several diseases. However, viral vectors suffer from serious disadvantages including poor transduction of many cell types, immunogenicity, direct tissue toxicity and lack of targetability. Non-viral polymeric gene delivery vectors (polyplexes) provide an alternative solution but are …

Computational And Experimental Determination Of The Mixing Efficiency Of A Microfluidic Serpentine Micromixer, Siril Arockiam

Theses

In microfluidics, efficiency and mixing time are the greatest disadvantages. These parameters hinder the application of microfluidic devices for biochemical and immunological assays. However, once these disadvantages have been overcome by optimizing the parameters of the microfluidic device, it becomes the important analytical tool. In this experiment, various designs of microfluidic devices have been both simulated using COMSOL software, and experimentally verified to obtain the optimized parameter such as depth and velocity for better mixing efficiency. The COMSOL model has been validated by comparing the results with fluorescent images data of the experiment. The microfluidic device is built with Adhesive …

Comparative Analysis Of The Dissolution Performance Of Aspirin Tablets In The Usp Apparatus 2 And In A Minivessel Dissolution System, Annmarie C. Walker

Theses

Dissolution testing is a critical component of quality control procedures in the pharmaceutical industry in order to ensure that the final solid dosage forms have consistent dissolution properties. Dissolution tests are also routinely conducted to evaluate the in-vitro performance of solid dosage forms during pharmaceutical development, to aid in the behavior of formulations, and to optimize drug release from dosage forms.

The use of compendial dissolution test apparatus and techniques, such as the USP 2 (Paddle), to characterize the dissolution performance of oral drug delivery system is an established area of pharmaceutical science. However, this method is not always appropriate, …

Power Dissipation And Power Correlations For A Retreatblade Impeller Under Different Baffling Conditions, Chadakarn Sirasitthichoke

Theses

Glass-lined stirred reactors and tanks are commonly used in the pharmaceutical industry because of their corrosion resistance, ease of cleanliness and minimization of product contamination. Most industrial glass-lined tank reactors are provided with a torispherical tank bottom and a retreat curve impeller with low impeller clearance from the vessel bottom. The power, P, dissipated by the impeller is a critical process parameter to mixing processes to achieve the desired mixing effect, especially since the power per unit volume, P/V, directly controls mass transfer processes and other mixing phenomena. However, little information has been published about the power dissipation and the …

Novel Experimental Method For The Determination Of The Minimum Agitation Speed For Solids Suspension In Flat-Bottomed Stirred Tank Reactors, Shriarjun Shastry

Theses

Knowledge of the minimum agitation speed, Njs, required to suspend finely divided solids in vessels stirred by an impeller is a critical parameter to properly operate industrial tanks in a large number of industrial operations. The most common experimental approach to measure N_js is that of Zwietering’s (Chem. Eng. Sci., 1958, 8, 244-253), consisting of visually inspecting the tank bottom and visually determining the impeller agitation speed at which the solids are observed to rest on the tank bottom for no more than 1-2 seconds before being swept away. This method is quite reliable, but a method …

Computational And Experimental Determination Of The Hydrodynamics In A Stirred Unbaffled Vessel Provided With Angle-Mounted Axial Impellers, Ji Ma

Theses

In most industrial applications, stirred tanks and reactors are typically provided with baffles to improve their mixing characteristics. However, in a number of pharmaceutical production facilities unbaffled vessels are commonly used. The absence of baffles is preferred in such cases because it reduces the potential for contamination and makes cleaning the vessel between batches easier. However, the lack of baffles also has a negative impact on the system’s hydrodynamics since it often results in poor mixing of the batch, especially if the impeller is centrally placed, since the liquid in such a system is subject to a strong tangential flow, …

Experimental Determination Of The Agitation Requirements For Solids Suspension In Dissolution Systems Using A Mini Paddle Apparatus, Yang Song

Theses

Dissolution testing is a critical step in quality control of manufactured final products in the pharmaceutical industry. The United State Pharmacopeia (USP) Dissolution Testing Apparatus 2 (paddle) is the most widely used dissolution test devices in the pharmaceutical industry to formulate solid drug dosage forms and to develop quality control specifications for its manufacturing process.

Mini vessels and mini paddle dissolution testing systems are smaller versions of the USP 2 Apparatus. The concept of the mini paddle apparatus is similar to that of the USP 2 setup but it is scaled down about to 1/5 of the volume and 40% …

Effect Of Impeller Submergence On Power Dissipation And Solids Suspension In Mixing Systems Equipped With Pitch-Blade Turbines, Yufeng Song

Theses

Mixing and dispersion of solids in a liquid is a process frequently encountered in the pharmaceutical industry and often conducted in cylindrical baffled tanks stirred by mechanical impellers. In operations where the liquid level is decreased (as often which emptying the tank) the process must be stopped when the solids are no longer suspended. In this work, the minimum agitation to suspend solids (Njs) when the liquid level was lowered, and the impeller submergence S_b changed as a result were determined for the case of a six-blade, pitch-blade turbine (6-PBT) impeller. The power consumed by the impeller …

Experimental Determination Of Solids Suspension With Angled Impeller In A Pharmaceutical Mixing Vessel, Yingxi Tang

Theses

Angled-mounted impellers are commonly used in a number of pharmaceutical industry applications, from laboratory reactors to full-scale tanks. In these systems, the impeller is not centrally and vertically mounted, as in most stirred vessels, but it enters the vessel, and is therefore immersed in the fluid, at an angle from the vertical. This arrangement provides some baffling effects that would not otherwise exist if the impeller was centrally mounted.

One common requirement for such systems is that they are capable of suspending small solids dispersed in the liquid. Therefore, it is critical to know the value of the minimum agitation …

Effect Of Twin Screw Granulator Process Parameters On Granule Attributes, Haosheng Xu, Ridade Sayin, James Litster

The Summer Undergraduate Research Fellowship (SURF) Symposium

Twin screw wet granulation has been considered as an efficient and effective technique of manufacturing granules (agglomerates made up of small particles) and has been widely applied in pharmaceutical industry. However, narrow granule size distributions are difficult to achieve. This study aims to elucidate the effect of process parameters such as liquid feed rate and screw configuration on the granule attributes through granule characterization. The methods used are sieve analysis (for size distribution), liquid distribution (determining the dye concentration in the granules) and density and porosity (percentage gas volume in the granule) analyses. A sieve shaker is used to divide …

Assessment Of A Marine Polysaccharide For Use As Excipient In Pharmaceutical Hot-Melt Extrusion, Qing Ye

Theses

Pharmaceutical Hot Melt Extrusion (HME) is currently investigated by both industry and academia as a method for manufacturing solid oral dosages with improved bioavailability of poorly-water soluble active pharmaceutical ingredients (APIs) and control drug release of water-soluble APIs. Although HME is traditionally utilizing synthetic polymers to produce such dosages, biopolymers constantly gain ground by virtue of renewability, biocompatibility and in some cases biodegradability. In this work, the possibility of using Keltone, a marine polysaccharide derived from brown seaweed, as a polymeric excipient for pharmaceutical HME is explored. Keltone is insoluble in acidic pH and soluble in basic pH, therefore making …

Hydrodynamic Cfd Modeling Of A Pharmaceutical Reactor Vessel Provided With A Retreat-Blade Impeller Under Different Baffling Conditions, Christopher G. Foehner

Theses

In the pharmaceutical industry, glass-lined reactors and vessels are often utilized to carry out a variety of different unit operations. Within these systems, both the vessel and impellers are typically glass-lined in order to provide superior corrosion resistance, prevent product contamination, and enhance cleanability. This approach, in turn, often requires the use of different, and sometimes sub-optimal, baffling conditions, which affect the hydrodynamics of the vessels and the reactor performance.

Computational Fluid Dynamics (CFD) is a computational tool that employs numerical methods and algorithms to discretize and numerically solve partial differential equations (PDEs) representing mass, energy, and momentum conservation equations …

Dispersion And Dissolution Kinetics Of Api Particles In Pharmaceutical Hot Melt Extrusion, Wang Zhan

Theses

Pharmaceutical Hot Melt Extrusion (HME) is essentially a special case of polymer compounding. The elementary steps involved in traditional plastics melt processing are handling of particulates, melting, dispersive and distributive mixing, devolatilization and stripping, and finally pressurization and pumping. However, for pharmaceutical HME, the dissolution of the API (Active Pharmaceutical Ingredient) is an additional and very important elementary step, along with the melting of the polymeric excipient that precedes it, and mixing which accelerates the dissolution process. A major concern in pharmaceutical HME is the thermal degradation of the API. To avoid overexposure of API to heat while ensuring complete …

Experimental Determination Of The Mixing Requirements For Solid Suspension In Pharmaceutical Stirred Tank Reactors, Anqi Zhou

Theses

Glass and glass-lined, stirred-tank reactors are of significant importance in the pharmaceutical and related industries. Because of fabrication issues, a retreat blade impeller (RBI) with a low impeller clearance off the tank bottom is commonly used in glass-lined reactors, typically combined with a single baffle (providing only partial baffling conditions) mounted from the top of the reactor. In addition, these reactors are often provided with a torispherical bottom. Other configurations are also used, including full baffling or no baffles at all, hemispherical bottoms, and different impeller types. Despite their common use, some of the most important mixing characteristics of this …

Quantification Of Factors Governing Drug Release Kinetics From Nanoparticles: A Combined Experimental And Mechanistic Modeling Approach, Kyle Daniel Fugit

Theses and Dissertations--Pharmacy

Advancements in nanoparticle drug delivery of anticancer agents require mathematical models capable of predicting in vivo formulation performance from in vitro characterization studies. Such models must identify and incorporate the physicochemical properties of the therapeutic agent and nanoparticle driving in vivo drug release. This work identifies these factors for two nanoparticle formulations of anticancer agents using an approach which develops mechanistic mathematical models in conjunction with experimental studies.

A non-sink ultrafiltration method was developed to monitor liposomal release kinetics of the anticancer agent topotecan. Mathematical modeling allowed simultaneous determination of drug permeability and interfacial binding to the bilayer from release …

Dissolution Of Different Commercial Aspirin Tablets Using A Novel Off-Center Paddle Impeller (Opi) Dissolution Testing System, Yang Qu

Theses

Dissolution testing is routinely conducted in the pharmaceutical industry to provide in vitro drug release information for quality control purposes. The most common dissolution testing system for solid dosage forms is the United States Pharmacopeia (USP) Dissolution Testing Apparatus 2. In this work, a modified Apparatus 2, termed "OPI" System for "off-center paddle impeller," in which the impeller is placed 8 mm off center in the vessel is tested to determine its sensitivity to differentiate between the dissolution profiles of differently formulated and manufactured tablets. Dissolution tests are conducted with both the OPI System and the Standard System using three …

Qsar Modeling Of Chemical Penetration Enhancers Using Novel Replacement Algorithms, Hui Qiu

Theses

The applications of transdermal delivery are limited because of the resistance of the skin to drug diffusion. Only potent drugs, with molecular weight less than 500 Da, are suitable to cross the skin barrier. Chemical Penetration Enhancers (CPEs) are used to promote the absorption of solutes across the dermal layers. In this investigation, a Quantitative Structure-Activity Relationship (QSAR) model is applied to relate chemical penetration enhancer structures with the flux enhancement ratio through a statistical approach.

A database, consisting of 61 non-polar CPEs, is selected for the study. Each compound is represented by 777 QSAR descriptors, which encode the physical …

Hollow Fiber Membrane-Based Air Gap Membrane Distillation, Xuan Wang

Theses

Membrane Distillation (MD) is a thermally-driven separation process. In this research, desalination of 1 % NaCl solution is achieved by one type of MD namely, Air Gap Membrane Distillation (AGMD). The characteristics of AGMD are evaluated by using a hollow-fiber-set-based compact device. Hot brine solution and cold water are passed through two different fiber sets separately: porous hydrophobic polyvinylidene fluoride hollow fibers of the E type (PVDF E) and solid polypropylene (PP) hollow fibers. Vapor from the hot brine crosses the membrane pores of the PVDF fibers and the air gap, and finally condenses over the surface of solid hollow …

Hydrodynamic Effects Of A Cannula In A Usp Dissolution Testing Apparatus 2, Qianqian Liu

Theses

Dissolution testing is routinely used in the pharmaceutical industry to provide in vitro drug release information for drug development and quality control purposes. The USP Testing Apparatus 2 is the most common dissolution testing system for solid dosage forms. Usually, sampling cannulas are used to take samples manually from the dissolution medium. However, the inserted cannula can alter the normal fluid flow within the vessel and produce different dissolution testing results.

The hydrodynamic effects introduced by a permanently inserted cannula in a USP Dissolution Testing Apparatus 2 were evaluated by two approaches. Firstly, the dissolution tests were conducted with two …

Effect Of Tablet Compression On The Dissolution Of Aspirin Tablets Using A Novel Off-Center Paddle Impeller (Opi) Dissolution Testing System, Chuan Sun

Theses

In the pharmaceutical industry, dissolution testing is routinely carried out to determine the dissolution rate of oral solid dosage forms. Among several testing devices, the USP Dissolution Apparatus 2 is the device most commonly used. However, despite its widespread use, this apparatus has been shown to produce test failures and to be very sensitive to a number of small geometry changes.

The objective of this study was to determine whether a novel dissolution system termed “OPI” for “off-center paddle impeller” was sensitive enough to determine differences in tablet dissolution profiles caused by different compression pressure during the tablet manufacturing process. …

Engineering Spores To Display G Protein-Coupled Receptors For Directed Evolution, Alyssa Misoo Kim

Theses

All human cells are surrounded by a plasma membrane made from a phospholipid bilayer, which is responsible for maintaining a biologically active species, while stopping entry of deleterious substances from the outside. G protein-coupled receptors (GPCRs) are the membrane proteins, which transmit signals across the cell membrane. GPCRs are involved in almost every physiological process, and irregular control leads to pathological conditions. Therefore, they are major drug targets. Crystal structure determination is required to understand the molecular details of activation/deactivation. However, GPCRs are difficult to crystallize because of stability issues. An efficient protein engineering system needs to be developed. The …

Hydrodynamic Effects Of An Arch-Shaped Fiber Optic Probe In A Dissolution Testing Apparatus 2, Yiran Zhang

Theses

Dissolution testing is widely used in the pharmaceutical industry to evaluate newly developed drug formulations and as a quality control method to insure that solid dosage forms have consistent dissolution property. Typically, samples are manually drawn from the dissolution vessel prior to analysis. An approach to overcome the limitations of manual sampling consists in the use of sampling probes, such as fiber optic probes, permanently inserted in the dissolution medium and continually sampling the drug concentration in it as the solid dosage form dissolves. Despite their advantages, permanently inserted fiber optic probes can alter the normal fluid flow within the …