Orthodontics and Orthodontology Commons^™

The Validation Of An Existing Sleep Apnea Questionnaire And Its Application To Clinical Orthodontics, Jeffery C. Biggs

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to validate a sleep apnea questionnaire from the Loma Linda University Sleep Disorders Center, and then to utilize the questionnaire in order to identify potential sleep apnea patients from a pre-orthodontic patient sample. Study patients were selected from the Loma Linda University Sleep Disorders Center and the Loma Linda University Orthodontics Clinic, both in Loma Linda, California, USA.

Methods: The study sample represented all of the patients initially examined from 1996 through 1998 who were age 8-15 years old at the time of the initial exam. Validation of the questionnaire was based on responses …

A Comparison Of Bond Strength Between Three Glass Ionomer Cements Used For The Retention Of Orthodontic Bands, Bryan C. Johnson

Loma Linda University Electronic Theses, Dissertations & Projects

The study compared the retentive bond strength of Ketac-Cem with Ultra Bond-Lok and a 3M Experimental glass ionomer cement at 1 hour and 24 hours using laser and common light cure techniques. The sample consisted of one hundred twenty sound extracted human molars divided into 5 groups: Ketac-Cem (self-cure), Ultra Band-Lok (light-cure), Ultra Band-Lok (laser cure), 3M Experimental (light-cure) and 3M Experimental (laser cure). Stainless steel orthodontic bands with buccal and lingual cleats were cemented as per manufacturer's instructions for each of the test samples. The samples were placed in water until ready for testing. The shear bond strength of …

Establishing Norms For A Mexican Group Using Ricketts, Steiner And Arnett Analyses, Mauricio Gonzalez Balut

Loma Linda University Electronic Theses, Dissertations & Projects

Most existing cephalometric analyses are based on norms for the Caucasian population. Therefore, they cannot be properly applied for Mexican or Hispanic patients. Ethnic variations in the normal positions of the maxilla and mandible influence and alter the diagnosis and treatment plan for each of the different type of malocclusions. Previous studies have addressed the difference between the Caucasian norms and the Hispanic norms, this indicates the variety of their skeletal, dental and facial features.

It is the purpose of this study to establish specific cephalometric standards for the native Mexican group, using the Steiner and Ricketts analyses along with …

The Relationship Of The Incisive Canal To Maxillary Median Diastema, Jeffery S. Corbett

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to assess the relationship between the incisive canal and maxillary median diastema, and to identify an imaging method capable of documenting the geometry and dimensions of the incisive canal. The sample consisted of 59 dry skulls, 26 of which had a maxillary median diastema ranging in size from 0.1 mm to 2.8 mm (mean 1.0 mm, SD = 0.7 mm). Each skull had all of the permanent maxillary teeth present from first molar to first molar and lacked any apparent non-orthodontic condition that could have caused the diastema. Diastema width and canal diameter were …

A Comparison In Processing Of Alginate Orthodontic Impressions By Commercial Labs, Robert Agnetta

Loma Linda University Electronic Theses, Dissertations & Projects

Many orthodontists use commercial orthodontic laboratories for the processing of their impressions including preparation of the impression for pouring, model retrieval, final trim, and labeling. It was studied, by way of random sample survey, what materials and methods were most commonly utilized in 100 offices of members of the American Association of Orthodontics. This survey data was analyzed and used to establish a protocol to study differences in dimensions of models made from impressions that were poured immediately, versus those that were stored and picked up at the office the same day they were taken, and those that were shipped …

A Pilot Study Testing A Proprietary Sealant For Plaque Reduction, Jennifer Rowland

Loma Linda University Electronic Theses, Dissertations & Projects

Enamel demineralization due to increased plaque accumulation is a well-recognized problem associated with fixed orthodontic appliances. The purpose of this study was to evaluate the efficacy of a proprietary product to be marketed by 3M Unitek for the reduction of plaque accumulation and thereby reduce enamel demineralization.

Sixty four bovine teeth were divided equally into an untreated control group and a group treated with the proprietary sealant product. Both groups were subsequently immersed in a Streptococcus mutans culture. Plaque deposits from each group were removed, suspended in trypticase soy broth, serially diluted, and plated on trypticase soy agar at 1, …

An In Vitro Study Of Plaque Deposition And Its Comparative Effect On Bond Strength, Debra L. Finch Cook

Loma Linda University Electronic Theses, Dissertations & Projects

Treatment with fixed orthodontic appliances can change the environment in the oral cavity by creating stagnant areas that facilitate bacterial colonization and substance retention. The purpose of this study was to examine in vitro plaque formation associated with bonded orthodontic appliances and how this could affect bonding strengths.

Ortho Concise and Transbond XT were the composite resin materials used in this study. Mandibular incisor metal brackets were bonded to bovine mandibular anterior teeth. Each composite resin was studied in two groups: plaque growth and without plaque growth, and their bond strengths were compared at time intervals of 3,45, and 180 …

A Cephalometric Study Of The Class Ii Correction Effects Of The Eureka Spring, Ernest L. Stromeyer

Loma Linda University Electronic Theses, Dissertations & Projects

The effect of the Eureka Spring appliance, was investigated on 37 consecutively treated, non compliant, bilateral Class II malocclusions, requiring at least 3 mm or more of additional molar correction. The mean pretreatment age of this sample was 13.9 years. All patients were treated by a single clinician utilizing the Eureka Spring. Lateral cephalographs were taken at start of orthodontic treatment (T1), at insertion of Eureka Springs (T2), and at removal of the Eureka Springs (T3). The average treatment interval between T2 and T3 was 4 months. Class II correction occurred almost entirely by dentoalveolar movement, 33% in the maxilla …

A Pilot Study On The Short Term Effects Of The Herbst Appliance On The Glenoid Fossa, David A. Bennion

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this pilot study was to evaluate the initial effects of the Herbst appliance and determine through the use of common cephalometric radiographs that were optically enhanced and then digitally reproduced, if fossa migration is taking place. Fourteen, (6 male, 8 female), growing patients were treated by the same clinician for the correction of a Class II malocclusion using a modified Herbst appliance. Pretreatment (T₁) standard lateral cephalometric radiographs and post Herbst treatment (T_H) optically enhanced lateral cephalometric radiographs were taken. All radiographs were digitally captured and reproduced so 6 linear and 1 area …

An Investigation Of The Divine Proportion In Varying Facial Types, Gender And Age Groups, Chris A. Coleman

Loma Linda University Electronic Theses, Dissertations & Projects

This retrospective study evaluated the 26 cephalometric measurements which comprise 13 ratios that were purposed by Robert M. Ricketts to be Divine Proportions. The hypothesis that was tested in this study was one that stated that these 13 ratios were not only Divine Proportions, but were constant in all facial types, in both genders and in all stages of growth. In an effort to test this hypothesis, cephalographs were chosen at random from the files of Dr. Ruel Bench, which are currently housed in the Ricketts Research Library at Loma Linda University. Each film tracing was reviewed for accuracy and …

A Study Of Craniofacial Growth In Infant Heart Transplant Recipients Receiving Cyclosporine, David G. Niles

Loma Linda University Electronic Theses, Dissertations & Projects

Cyclosporine is an effective immunosuppressive drug that has found widespread application in organ transplantation. However, a few studies have implicated cyclosporine as adversely affecting craniofacial growth in the pediatric population. The purpose of this study was to evaluate the possible untoward effects of cyclosporine long-term on craniofacial growth in a group of infant heart transplantation recipients. A prospective group (n=28) of eighteen Caucasian children (9 female and 9 male, ages 4-10 years) and ten Hispanic children (3 female and 7 male, ages 4-10 years) were evaluated. None of the subjects had undergone orthodontic therapy. All subjects had heart transplantation before …

A Comparative Study Of The Permanent Deformation Of Aesthetic Polymer Brackets, Samar Bou Assi

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to Investigate and compare the plastic or permanent deformation of different commercially available aesthetic polymer brackets (American, Ormco, GAC and RMO). It also examined the effect of tying the bracket wings with a wire ligature as well as the effect of thermocycling on the permanent deformation of these brackets.

Seven brackets of each type were tested In each of the three following conditions; group 1; tied with a wire ligature and loaded, group 2; thermocycled and loaded, and group 3: loaded only, with a total of 84 brackets tested. Each bracket was bonded to …

The Relationship Of Tooth Size And Arch Form To Arch Depth, Harold C. Avila

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to determine the relationship of arch form and tooth size to arch depth measurements of study models (Casts) and their respective lateral cephalometric radiographs (Radiographs) in a population of patients treated to an acceptable occlusion without extraction. One hundred and twenty casts were divided into three tooth size classes within each of four arch form categories. Results showed there was a statistically significant change in the arch depth measurement when tooth size was varied. There was no statistically significant change in the arch depth measurement when arch form was varied. The results showed greater …

Change In Bracket Bond Strength And Enamel Calcium : Due To Repeated Bonding With Conventional And Resinomer Glass Ionomer Cements, David L. Wilkinson

Loma Linda University Electronic Theses, Dissertations & Projects

Glass ionomers chemically and mechanically bond to enamel. Repeated bonding may deplete calcium in enamel and reduce the bond strength. Seventy-five non-carious molars were randomly divided into three equal groups and metal brackets were bonded with either Ketac-Cem, Photac-Bond, or Fuji Ortho LC. The samples were stored in 100% humidity at 37° C for 7 days then shear/peel tested with an Instron machine. New brackets were repeatedly cemented with the same cement to the same tooth and shear/peel tested a total of five times. After each shear/peel test the tooth with the mean bond strength from each cement was set …

A New Soft Tissue Analysis : To Establish Facial Esthetic Norms In Young Adult Females, Anne Béress

Loma Linda University Electronic Theses, Dissertations & Projects

Two hundred and fifty-five articles, books, and masters theses were reviewed for the most frequently applied soft tissue measurements in the literature in order to develop a new soft tissue analysis computer program that includes established soft tissue measurements and the newly developed globe analysis. A meta analysis of 20 normal occlusion studies, was performed to obtain mean values and standard deviations to form a large sample size. Inclusion criteria for articles in the meta analysis were normal occlusion, no orthodontic treatment, pleasing faces, statement on age, race, and lip position of the population. For the lateral view, angular and …

In Vitro Plaque Formation On Orthodontic Resin Sealants, Leland W. Pack

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to examine in vitro plaque formation on sealant coated enamel. The plaque growth on different types of sealants placed on enamel was compared to each other and to an unsealed enamel control. The antimicrobial properties of sealants were also studied.

Sealant coated bovine enamel disks were immersed in a S. mutans culture medium for four days. The amount of bacterial plaque formation was quantified by removing the deposit, suspending it in solution with subsequent serial dilution. Aliquots of the dilutions were then spread on blood agar plates and incubated for 48 hours. The number …

Treatment Effects Of The Edgewise Bioprogressive Herbst Appliance, Bernard C. Chang

Loma Linda University Electronic Theses, Dissertations & Projects

The effect of the Edgewise Bioprogressive Herbst appliance, as described by Dr. Terry Dischinger, was investigated on 24 Class II, Division 1 malocclusions. Mean pretreatment age of this sample was 11.2 months. All patients were treated by Dischinger with a Bioprogressive Herbst appliance. Lateral cephalographs taken before, after Herbst appliance therapy, and after edgewise treatment were traced, then digitized into Quick Ceph™. Measurements were computed by the computer software. The following results were found: 1) Average treatment time was 9 months. 2) An overcorrected Class I relationship was achieved. 3) Class II malocclusion was corrected by 4.5 mm skeletal alteration …

The Accuracy Of Computer Video Imaging Prediction : Just Prior To Surgical Mandibular Advancement/Genioplasty Orthognathic Cases, Jason T. Chiakowsky

Loma Linda University Electronic Theses, Dissertations & Projects

The accuracy of the computer video imaging treatment prediction was investigated using Quick Ceph Image.™ Thirty one surgical mandibular advancement/genioplasty orthognathic cases were examined to determine if the soft tissue profile prediction was representative of the actual result. All patients were over the age of 18. Lateral cephalographs and slides were taken immediately pre-surgically, and six months post-surgically. The slides were duplicated into 4X6 photographs. The cephalographs were digitized and the photographs captured by video on the Quick Ceph Image software program. A line drawing and computer video image treatment prediction were generated using the actual surgical change that had …

Current Theories On The Cell Biology Associated With Tooth Movement, Mohamadreza Yazdi

Loma Linda University Electronic Theses, Dissertations & Projects

This article discusses the current information on the mechanism of the biological signaling that takes place to bring about orthodontic tooth movement.

Currently, there are two general theories as to how orthodontic mechanical force is translated to biologically meaningful signals for the cells of the periodontium. These include a cellular-humoral response and a bioelectric response.

There are various mechanisms utilized by the cells of the periodontium to bring about the cellular-humoral response. These include: The activation of the cells of the immune system to synthesize and release specific chemicals (cytokines) which affect cell function, direct effects of mechanical force on …

Mandibular Asymmetry In Unilateral Class Ii Malocclusion : A Cephalometric Study, Raed Z. Moussa

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study is to evaluate skeletal and dental asymmetry in unilateral class II malocclusion. A study group of 25 unilateral subdivision patients was compared to 25 class I malocclusion patients serving as the control group. Submento-vertical and frontal radiographs were used for the evaluation. Symmetry was evaluated by comparing measurements between right and left sides for both groups and matching the middle points with the midsagittal axis. Statistical paired and simple t-test were used to evaluate the difference between the two sides for both groups. The measurements showed no significant skeletal and dental asymmetries except for three …

Space Closure Efficiency With Modified Ceramic Brackets : A Comparative Study, Kirk A. Specht

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to determine if the rate of extraction site closure was determined by the type of ceramic bracket used. A new ceramic bracket with a metal archwire slot was compared with a conventional ceramic bracket. Twenty patients were randomly assigned the metal slot ceramic bracket and conventional ceramic to one half of their maxillary arch respectively. The distribution was even left and right.

Retraction was started and completed on an 0.016" stainless steel round continuous archwire. One hundred gram sentalloy springs provided a uniform retraction force and were reactivated every four weeks to maintain a …

The Rotations Of Maxillary Molars, Mandibular Molars, And Maxillary First Premolars In Acceptable Occlusions, G. Kristian Hansen

Loma Linda University Electronic Theses, Dissertations & Projects

The rotation of the maxillary molars is considered important in the orthodontic treatment of malocclusions. In this study a computer analysis program was developed to examine the rotations of maxillary molars, mandibular molars, and maxillary first premolars in casts of permanent dentitions with acceptable occlusions. Ninety three sets of untreated "acceptable occlusion" models from the collection of the Foundation for Orthodontic Research (FOR) were scanned on a flat bed scanner at 600 dots per inch (dpi). The images were analyzed using custom software on a computer. Measurements were made by relating maxillary first permanent molars to the midline, the archform, …

A Comparison Of Retentive Strengths Of Two Types Of Inner Surface Treatments Of Orthodontic Bands, Jean M. Rathbun

Loma Linda University Electronic Theses, Dissertations & Projects

Band failure during orthodontic treatment results in a potential for decalcification and/or caries and may cause a prolonged treatment time. An increase in the bond strength at the cement/band interface would likely decrease clinical band failure. Sand-blasting and photo-etching have been suggested to improve this bond.

This study investigated the retentive strengths of untreated orthodontic bands, sand-blasted bands and photo-etched bands when cemented with glass polyalkenoate cement on extracted human molars. The sand-blasted bands and photo-etched bands were both found to have significantly stronger bond strengths (p

The Effects Of Rapid Palatal Expansion Therapy On The Periodontal Tissues Of The Central Incisors, Richard Gutierrez

Loma Linda University Electronic Theses, Dissertations & Projects

The periodontal structures around the maxillary central incisors in thirty-nine post-orthodontically treated patients, twenty-five of these patients had experienced Rapid Palatal Expansion (RPE), were examined to determine the periodontal consequences associated with two ways of managing the resultant diastema. In fourteen patients the diastema closure was assisted by elastomeric chain and in eleven patients the diastema closure was not assisted. Fourteen non-RPE orthodontically treated patients served as controls. Height of attached gingiva, gingival sulcus depth, attachment level, and alveolar bone level were recorded. One examiner, using calibrated techniques, performed all the measurements. The RPE groups and the control group all …

Plastic Deformation Of A Polycarbonate Bracket : Utilizing A New Testing Apparatus, Terri L. Alfred

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to investigate the plastic (permanent) deformation of a polycarbonate bracket (Miura, RMO) under the following different conditions: (1) untreated, (2) immersed in 37°C-water for 120 days, and (3) immersed in 60°C-water for 24 hours. Ten brackets for each condition were tested, with a total of 30 brackets tested. Each bracket was bonded to a metal mesh pad which was tack welded to a solid stainless steel ring. The assembly was placed under a loading frame. This loading frame removes variables such as bond adhesive strengths, distortion of a wire used to deform the bracket …

A Pilot Study Comparing The Forces Applied : Using A Chin Cup And Three Types Of Protraction Headgear, Daniel Miles Beisiegel

Loma Linda University Electronic Theses, Dissertations & Projects

A pilot study comparing force distributions of a chin cup, the Great Lakes reverse pull headgear (RPHG), Ormco's adjustable dynamic RPHG, and Grummons RPHG was done. A skull from a 69 year old female which demonstrated a Class III malocclusion was used to perform the tests of force. Forces applied to and generated on the skull were measured using a water-filled balloon system. This method was tested and found to be reliable and accurate.

Repeated measurements of force were recorded for each of the areas of stress (forehead, cheeks, chin, and condyles, as well as the posterior and superior portions …

Long-Term Posttreatment Upper Incisor Inclination : Relative To Facial Axis Angulation As A Measure For Incisor Placement, David Lawrence Sparks

Loma Linda University Electronic Theses, Dissertations & Projects

This study was designed to determine whether upper central incisor inclination approximated the facial axis, long-term, posttreatment, regardless of the initial malocclusion or immediate posttreatment incisor inclination. Lateral head films at pretreatment, immediate posttreatment and long-term posttreatment were traced and evaluated. The sample was divided into facial type. Angle classification and treatment type (extraction vs. non-extraction). Statistical analyses included means, standard deviations, confidence intervals, population t tests and chi-square tabulations.

The results revealed that the upper central incisor did not approximate the facial axis after a minimum of 7 years posttreatment. This failed to support the use of the facial …

An In Vitro Quantitative Evaluation And Comparison Of A Custom And A Popular Stock Orthodontic Appliance, Richard Scott Anderw Schalo

Loma Linda University Electronic Theses, Dissertations & Projects

An in vitro performance evaluation and comparison of a patient individualized appliance (Elan, Ormco Corporation, Glendora, California) and a Roth prescription appliance ("A"- Company, San Diego, California) was made using the Ideal Tooth Relationship Index (ITRI).

The sample consisted of 19 duplicated sets of models for a total sample of 38. For each pair of models one set was bonded with an Elan appliance and a duplicated set was bonded with a Roth appliance. Bracket placement followed the manufacturers recommendations. The bracketed teeth from these models were sectioned out individually and the appliances allowed to fully express themselves on full …

Load Deformation Test Of Mini Twin Metal Brackets : A Comparative Study, Karl D. Peach

Loma Linda University Electronic Theses, Dissertations & Projects

The trend toward more esthetic brackets has led to smaller brackets being used by orthodontists. The purpose of this study was to determine the force required to deform these smaller brackets and calculate the stress in the metal by using a torsional wire bending force. Ten types of brackets were tested and the results analyzed to determine how bracket geometry, manufacturing method, or material selection affected the strength of brackets. Results showed a significant difference between manufacturing methods, material used, and bracket geometry. Brackets made of 17-4 PH SS and 303 SS withstood higher stress than 316 SS, and all …

An Assessment Of Three Different Forms Of Sterlization And Clinical Usage On Various Orthodontic Pin And Ligature Cutters : A Pilot Study, Warren L. Creed

Loma Linda University Electronic Theses, Dissertations & Projects

With an awareness of cross infection in dentistry and of AIDS (acquired immune deficiency syndrome), sterilization in the dental office has been brought to the public's attention by the news media. Much work has been done on which sterilization methods are acceptable but little has been written about the effects of sterilization procedures on the instruments themselves. In this study, 36 pin and ligature cutters were sterilized 250 cycles using three different methods of sterilization following the guidelines given by the Center for Disease Control (CDC). The cutters were examined for changes in lateral hinge movement, visual appearance and ordinal …