Biotechnology Commons^™

Light Intensity Control For Plc-Based Hydroponic Demonstration System, Christian Hitt

Biological and Agricultural Engineering Undergraduate Honors Theses

In order to demonstrate a skill set obtained through the University of Arkansas Biological Engineering, a group of students and I developed a hydroponic system where plants could be grown in a chamber. System parameters such as air quality, irrigation, and lighting were controlled by a Programmable Logic Computer (PLC) and an array of sensors and actuators. Each student focused on a certain aspect of this system, mine being the lighting. Developing this system involved researching the relationship between light intensity and plant growth, designing a system to suspend the lights above the growth chamber, and develop a system to …

Primer Payload System For Higher-Order Multiplex Lamp: Design And Development Of Unit Processes, Tochukwu Dubem Anyaduba

KGI Theses and Dissertations

Design and Development of Platforms for the Application of Loop-mediated Isothermal Nucleic Acid Amplification, LAMP, in the Diagnosis of Polymicrobial Diseases

Tochukwu Dubem Anyaduba, Travis Schlappi (PI)

For the past two decades, several isothermal nucleic acid amplification technologies have emerged. These are mostly in response to the need for robust molecular diagnostic tools amenable to point-of-care and limited-resource settings. Of these, loop-mediated isothermal amplification, LAMP, stands out as a highly specific and rapid alternative to the polymerase chain reaction, PCR. One of LAMP's significant characteristics involves using four essential and two loop (rate increasing) primers to recognize six to eight …

Lipid Droplet Membrane Proteome Remodeling Parallels Ethanol-Induced Hepatic Steatosis And Its Resolution, Carol A. Casey, Terrence M. Donohue Jr., Jacy L. Kubik, Vikas Kumar, Michael J. Naldrett, Nicholas T. Woods, Cole P. Frisbie, Mark A. Mcniven, Paul G. Thomes

Nebraska Center for Biotechnology: Faculty and Staff Publications

Abstract Lipid droplets (LDs) are composed of neutral lipids enclosed in a phospholipid monolayer, which harbors membrane-associated proteins that regulate LD functions. Despite the crucial role of LDs in lipid metabolism, remodeling of LD protein composition in disease contexts, such as steatosis, remains poorly understood. We hypothesized that chronic ethanol consumption, subsequent abstinence from ethanol, or fasting differentially affects the LD membrane proteome content and that these changes influence how LDs interact with other intracellular organelles. Here, male Wistar rats were pair-fed liquid control or ethanol diets for 6 weeks, and then, randomly chosen animals from both groups were either …

Nature-Inspired Material Strategies Towards Functional Devices, Sayantan Pradhan

Theses and Dissertations

Naturally sourced, renewable biomaterials possess outstanding advantages for a multitude of biomedical applications owing to their biodegradability, biocompatibility, and excellent mechanical properties. Of interest in this dissertation are silk (protein) and chitin (polysaccharide) biopolymers for the fabrication of functional biodevices. One of the major challenges restricting these materials beyond their traditional usage as passive substrate materials is the ability to combine them with high-resolution fabrication techniques. Initial research work is directed towards the fabrication of micropatterned, flexible 2D substrates of silk fibroin and chitin using bench-top photolithographic techniques. Research is focused on imparting electrochemical properties to silk proteins using conducting …

Covid-19 And Biocybersecurity's Increasing Role On Defending Forward, Xavier Palmer, Lucas N. Potter, Saltuk Karahan

Electrical & Computer Engineering Faculty Publications

The evolving nature of warfare has been changing with cybersecurity and the use of advanced biotechnology in each aspect of the society is expanding and overlapping with the cyberworld. This intersection, which has been described as “biocybersecurity” (BCS), can become a major front of the 21st-century conflicts. There are three lines of BCS which make it a critical component of overall cybersecurity: (1) cyber operations within the area of BCS have life threatening consequences to a greater extent than other cyber operations, (2) the breach in health-related personal data is a significant tool for fatal attacks, and (3) health-related misinformation …

Position-Scanning Peptide Libraries As Particle Immunogens For Improving Cd8+ T-Cell Responses, Michael C. Vega

Faculty Articles, Papers, and Other Scholarship

Short peptides reflecting major histocompatibility complex (MHC) class I (MHC-I) epitopes frequently lack sufficient immunogenicity to induce robust antigen (Ag)-specific CD8⁺ T cell responses. In the current work, it is demonstrated that position-scanning peptide libraries themselves can serve as improved immunogens, inducing Ag-specific CD8⁺ T cells with greater frequency and function than the wild-type epitope. The approach involves displaying the entire position-scanning library onto immunogenic nanoliposomes. Each library contains the MHC-I epitope with a single randomized position. When a recently identified MHC-I epitope in the glycoprotein gp70 envelope protein of murine leukemia virus (MuLV) is assessed, only one …

Modeling Residence Time Distribution Of Chromatographic Perfusion Resin For Large Biopharmaceutical Molecules: A Computational Fluid Dynamic Study, Kevin Vehar

KGI Theses and Dissertations

The need for production processes of large biotherapeutic particles, such as virus-based particles and extracellular vesicles, has risen due to increased demand in the development of vaccinations, gene therapies, and cancer treatments. Liquid chromatography plays a significant role in the purification process and is routinely used with therapeutic protein production. However, performance with larger macromolecules is often inconsistent, and parameter estimation for process development can be extremely time- and resource-intensive. This thesis aimed to utilize advances in computational fluid dynamic (CFD) modeling to generate a first-principle model of the chromatographic process while minimizing model parameter estimation's physical resource demand. Specifically, …

Environmental Hygiene For Covid-19: It's All About The Mask, Daniel B. Oerther, Mona Shattell

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Functional Characterization Of Petiolule-Like Pulvinus (Plp) Gene In Abscission Zone Development In Medicago Truncatula And Its Application To Genetic Improvement Of Alfalfa, Juan Du, Shaoyun Lu, Maofeng Chai, Chuanen Zhou, Liang Sun, Yuhong Tang, Jin Nakashima, Jaydeep Kolape, Zhaozhu Wen, Marjan Behzadirad, Tianxiu Zhong, Juan Sun, Yunwei Zhang, Zeng-Yu Wang

Nebraska Center for Biotechnology: Faculty and Staff Publications

Alfalfa (Medicago sativa L.) is one of the most important forage crops throughout the world. Maximizing leaf retention during the haymaking process is critical for achieving superior hay quality and maintaining biomass yield. Leaf abscission process affects leaf retention. Previous studies have largely focused on the molecular mechanisms of floral organ, pedicel and seed abscission but scarcely touched on leaf and petiole abscission. This study focuses on leaf and petiole abscission in the model legume Medicago truncatula and its closely related commercial species alfalfa. By analysing the petiolule-like pulvinus (plp) mutant in M. truncatula at phenotypic level …

Modeling, Fabrication And Characterization Of Coated Calcium Phosphate Scaffolds Produced By 3d-Printing For Tissue Engineering Application, Touri Maria

Student Works (2020-2029)

A fully interconnected 3-dimensional scaffold with pre-determined dimensions and porosity can be attained by design-dependent rapid prototyping techniques which possess precise control over the internal and external architecture of the scaffolds thus they can overcome the problems associated with the process-dependent classical approaches. Interruption of vascular flow with fracture or surgical osteotomy results in a transient hypoxic gradient within the wound and subsequent tissue necrosis. Tissue engineering scaffolds with oxygen generating elements have shown to be able to increase the level of oxygen and cell survivability. In this study, biphasic calcium phosphate (BCP) scaffolds with the composition of 60% hydroxyapatite …

Suspended Carbon Nanowire Biosensor For Rapid And Label-Free Salmonella Detection, Thiha Aung

Student Works (2020-2029)

Carbon, the building block life, is rapidly becoming the building block of nextgeneration electronics and sensor materials. Of many ways to handle nanocarbon materials, Carbon Microelectromechanical Systems (C-MEMS) emerges as a unique way for top-down fabrication of three-dimensional carbon micro to nanostructures. In this work, the use of C-MEMS techniques in nanowire biosensor fabrication is explored. Two main hindrances in the use of C-MEMS carbon structures for biosensing lie in miniaturization to nanoscale sensor material and inertness of as-fabricated carbon. This dissertation presents ways to overcome these limitations. First, miniaturization to patterned sub-100 nm carbon nanowires was achieved by optimization …

In Vivo Biosynthesis Of Inorganic Nanomaterials Using Eukaryotes - A Review, Ashiqur Rahman, Julia Lin, Francisco E. Jaramillo, Dennis A. Bazylinski, Clayton Jeffryes, Si Amar Dahoumane

Life Sciences Faculty Research

Bionanotechnology, the use of biological resources to produce novel, valuable nanomaterials, has witnessed tremendous developments over the past two decades. This eco-friendly and sustainable approach enables the synthesis of numerous, diverse types of useful nanomaterials for many medical, commercial, and scientific applications. Countless reviews describing the biosynthesis of nanomaterials have been published. However, to the best of our knowledge, no review has been exclusively focused on the in vivo biosynthesis of inorganic nanomaterials. Therefore, the present review is dedicated to filling this gap by describing the many different facets of the in vivo biosynthesis of nanoparticles (NPs) using living eukaryotic …

Metabolic Network Analysis Of Filamentous Cyanobacteria, Daniel Alexis Norena-Caro

LSU Doctoral Dissertations

Cyanobacteria were the first organisms to use oxygenic photosynthesis, converting CO₂ into useful organic chemicals. However, the chemical industry has historically relied on fossil raw materials to produce organic precursors, which has contributed to global warming. Thus, cyanobacteria have emerged as sustainable stakeholders for biotechnological production. The filamentous cyanobacterium Anabaena sp. UTEX 2576 can metabolize multiple sources of Nitrogen and was studied as a platform for biotechnological production of high-value chemicals (i.e., pigments, antioxidants, vitamins and secondary metabolites). From a Chemical engineering perspective, the biomass generation in this organism was thoroughly studied by interpreting the cell as a microbial …

Design Of A 3d Printed Bioreactor For Bone Cancer Research, Brooklyn K. Vanderwolde, Katelyn Hillson

The Journal of Undergraduate Research

Bone cancer is an aggressive disease and has peak occurrence during physiological stimulation of growth and aging. Astronauts who undergo long-term space missions also acquire an increased risk of bone tissue degeneration and cancer. Few in-vitro models currently exist capable of reproducing the complex microenvironment of bone tissue to support multicellular activity in a three-dimensional structure. This limits the ability to understand disease progression and develop suitable treatment strategies. Therefore, developing a bone tissue model and an associated bioreactor is critical to understand the risks associated with cancer progression and improve treatment and preventions related to those risks. The goal …

Amino Acid Quantification For Dmc Biotechnologies, Russell Beckerman, Rebecca Hines, Kenya Jacob, Megan Mccabe, Ju Yun Lee

ENGS 89/90 Reports

From pharmaceuticals to biofuels, fermentation bioprocessing has gained traction in many industries reaching a global market value of almost $60 billion in 2018. However, applications of bioprocessing have been limited in scope due to high capital costs, long development times, and difficulties maintaining productivity during scale-up. Furthering development and scale-up of fermentation bioprocesses require careful monitoring and control through analytical chemistry. Currently, there are no small molecule quantification techniques that are sufficiently accurate, inexpensive, and high-throughput. This investigation explores viability of a novel quantification assay for amino acids in fermentation broth leveraging molecularly imprinted polymers (MIPs) and gold nanoparticles (AuNPs).

Mixed Culture Polyhydroxyalkanaotes (Pha) Production Using Crude Glycerol As Carbon Source, Mohamad Fauzi Ainil Hawa

Student Works (2020-2029)

Polyhydroxyalkanoates (PHA) is a biopolymer that has the prospect of becoming a preferred renewable and environmentally friendly resource with various applications including in manufacturing and medicine. Intensive studies have been carried out to find the most practical and economical method for PHA production because current commercial production of PHA is stringent and extremely costly. The aim of this study is to enrich PHA-accumulators with high PHA production capabilities by evaluating the stability of the enrichment process and by observing the effect of organic loading rate (OLR) on the production potential. In this study, PHA-accumulators were cultivated using activated sludge with …

Biotech Connector Brochure

Biotech Connector

The Biotech Connector represents an important opportunity to serve the economic needs of the people of Nebraska through further diversification of Nebraska's economy, and by helping forge and illuminate a pathway to jobs in the biotechnology space for Nebraska students.

The Biotech Connector is 7,700 sq. ft. of well-equipped wet-lab space located on Nebraska Innovation Campus. We provide incubation space and services to bioscience startups and high-growth biotech and research-based businesses.

Wet lab space provides aspiring startups and technology businesses with access to very expensive laboratory equipment that would be outside of the budget of most startups. Lack of access …

Optimization And Validation Of The Neurolux Wireless Optoelectronics System For Optogenetics, Karis Courey, Su Hyun Lee Ph.D., Adam Smith Ph.D., Nicholas Cilz Ph.D., Sarah K. Williams Avram Ph.D., Adi Cymerblit-Sabba Ph.D., June Song, Nicholas Leipzig Ph.D., W. Scott Young M.D., Ph.D.

Williams Honors College, Honors Research Projects

Utilizing light and genetic engineering, optogenetics permits the manipulation of events within cells via light using the light-sensitive properties of single-component microbial opsins. Microbial opsins are activated by a light source, such as lasers, light-emitting diodes, and incandescent sources that deliver light to the region of interest either directly or indirectly, such as through fiberoptics. In classical in vivo optogenetics, the wiring of optic fibers necessitates tethering of animals by the optic fiber to the light source. The novel NeuroLux wireless optoelectronic system for optogenetics circumvents issues pertaining to classical optogenetics by utilizing near-field power transfer via magnetic coil antennae …

Brassinosteroids Inhibit Autotropic Root Straightening By Modifying Filamentous-Actin Organization And Dynamics, Louise De Bang, Ana Paez-Garcia, Ashley E. Cannon, Sabrina Chin, Jaydeep Kolape, Fuqi Liao, J. Alan Sparks, Qingzhen Jiang, Elison B. Blancaflor

Nebraska Center for Biotechnology: Faculty and Staff Publications

When positioned horizontally, roots grow down toward the direction of gravity. This phenomenon, called gravitropism, is influenced by most of the major plant hormones including brassinosteroids. Epi-brassinolide (eBL) was previously shown to enhance root gravitropism, a phenomenon similar to the response of roots exposed to the actin inhibitor, latrunculin B (LatB). This led us to hypothesize that eBL might enhance root gravitropism through its effects on filamentous-actin (F-actin). This hypothesis was tested by comparing gravitropic responses of maize (Zea mays) roots treated with eBL or LatB. LatB- and eBL-treated roots displayed similar enhanced downward growth compared with controls …

Functional Characterization Of Petiolule-Like Pulvinus (Plp) Gene In Abscission Zone Development In Medicago Truncatula And Its Application To Genetic Improvement Of Alfalfa, Juan Du, Shaoyun Lu, Maofeng Chai, Chuanen Zhou, Liang Sun, Yuhong Tang, Jin Nakashima, Jaydeep Kolape, Zhaozhu Wen, Marjan Behzadirad, Tianxiu Zhong, Juan Sun, Yunwei Zhang, Zeng-Yu Wang

Nebraska Center for Biotechnology: Faculty and Staff Publications

Alfalfa (Medicago sativa L.) is one of the most important forage crops throughout the world. Maximizing leaf retention during the haymaking process is critical for achieving superior hay quality and maintaining biomass yield. Leaf abscission process affects leaf retention. Previous studies have largely focused on the molecular mechanisms of floral organ, pedicel and seed abscission but scarcely touched on leaf and petiole abscission. This study focuses on leaf and petiole abscission in the model legume Medicago truncatula and its closely related commercial species alfalfa. By analysing the petiolule-like pulvinus (plp) mutant in M. truncatula at phenotypic level (breakstrength and …

Higher Tensile Forces Across Cellular Junctions And An Intact Nuclear Linc Complex Is Required For Epithelial Function And Stability, Fnu Vani Narayanan

Theses and Dissertations

Recent advances in three-dimensional (3D) cell culture systems have provided key insights into the understanding of biochemical and physiological states of native tissue. A significant progress in the field of mechanobiology involves measuring cellular traction forces in a more native 3D environment. However, the effects of mechanical forces exerted across cellular junctions and the nuclear LINC complex, in an organized 3D system has not been investigated thus far. Epithelial cells spontaneously form acini (also known as cysts or spheroids) with a single, fluid-filled central lumen, when grown in 3D matrices. The size of the lumen is dependent on apical secretion …

Cgste11 Mediates Cross Tolerance To Multiple Environmental Stressors In Candida Glabrata, Mian Huang, Jibran Khan, Manpreet Kaur, Julian Daniel Torres Vanega, Orlando Andres Aguilar Patiño, Anand Ramasubramanian, Katy Kao

Faculty Publications

Candida glabrata is a human commensal and an opportunistic human fungal pathogen. It is more closely related to the model yeast Saccharomyces cerevisiae than other Candida spp. Compared with S. cerevisiae, C. glabrata exhibits higher innate tolerance to various environmental stressors, including hyperthermal stress. Here we investigate the molecular mechanisms of C. glabrata adaptation to heat stress via adaptive laboratory evolution. We show that all parallel evolved populations readily adapt to hyperthermal challenge (from 47 °C to 50 °C) and exhibit convergence in evolved phenotypes with extensive cross-tolerance to various other environmental stressors such as oxidants, acids, and alcohols. Genome …

Label-Free Microrna Optical Biosensors, Meimei Lai, Gymama Slaughter

Bioelectrics Publications

MicroRNAs (miRNAs) play crucial roles in regulating gene expression. Many studies show that miRNAs have been linked to almost all kinds of disease. In addition, miRNAs are well preserved in a variety of specimens, thereby making them ideal biomarkers for biosensing applications when compared to traditional protein biomarkers. Conventional biosensors for miRNA require fluorescent labeling, which is complicated, time-consuming, laborious, costly, and exhibits low sensitivity. The detection of miRNA remains a big challenge due to their intrinsic properties such as small sizes, low abundance, and high sequence similarity. A label-free biosensor can simplify the assay and enable the direct detection …

Renal Specific Rnai Delivery By Fibrillar Nanoparticle Excipients, Sam Wong

Dissertations, Theses, and Capstone Projects

RNA interference (RNAi) is a powerful tool to manipulate the phenotype of an organism by silencing the expression of specific genes and is viewed as a highly promising platform for treating undruggable targets and disorders where small molecule drugs and antibodies would fail. However, development of RNAi based therapies has faced major barriers including cellular and tissue-specific uptake of the Small Interfering RNA (siRNA). Utilizing different nanoparticles as RNAi excipients, cellular uptake and gene silencing potency can be greatly improved. The research in Dr. McDevitt groups has fibrillar carbon nanotubes (CNT) as carriers for siRNA for gene silencing in vitro …

Maximizing And Modeling Malonyl-Coa Production In Escherichia Coli, Tatiana Thompson Silveira Mello

LSU Master's Theses

In E. coli, fatty acid synthesis is catalyzed by the enzyme acetyl-CoA carboxylase (ACC), which converts acetyl-CoA into malonyl-CoA. Malonyl-CoA is a major building block for numerous of bioproducts. Multiple parameters regulate the homeostatic cellular concentration of malonyl-CoA, keeping it at a very low level. Understanding how these parameters affect the bacterial production of malonyl-CoA is fundamental to maximizing it and its bioproducts. To this end, competing pathways consuming malonyl-CoA can be eliminated, and optimal nutritional and environmental conditions can be provided to the fermentation broth. Most previous studies utilized genetic modifications, expensive consumables, and high-cost quantification methods, making …

Compositional Optimization Of Amyloid-Graphene Oxide Nanohybrids For Biomaterials, Claire L. Drewery

Materials Engineering

Amyloid nanofibrils are natural materials capable of self-assembling into precise structures with tunable functionalities, while exhibiting excellent mechanical properties. In combination with highly conductive graphene oxide (GO), the 1-D amyloid nanofibrils and 2-D nanosheets of GO can produce a robust and bio-functional nanohybrid, hypothesized to exhibit multi-domain functional properties useful for enzyme sensing, water purification, drug delivery, and tissue scaffolding applications. Here, we examine the properties of an amyloid-graphene oxide nanohybrid film made with amyloids derived from hen egg white lysozymes in an attempt to explore the diverse toolbox of amyloid derivatives and establish ideal fabrication methods and formulations of …

Study Of Paper Microbial Fuel Cells For Use In On-Site Wastewater Testing, William A. Tolmasoff

Master's Theses

This study demonstrated a technique for fabricating simple, low-cost Paper Microbial fuel cells (PMFC’s) in the model of a previous study to, for the first time, produce voltage from wastewater effluent. The PMFC’s were created by stacking and gluing the main components of an MFC together: reservoir layer; anode; cation exchange membrane (CEM); air cathode. A wax printer was used to create the hydrophobic borders of the PMFC’s on filter paper, and graphite paint was applied to the paper to create the anode. The CEM’s considered were filter paper, wax, and Nafion, with Nafion being the most efficient. Finally, the …

Novel Low Shear 3d Bioreactor For The Scaled Production Of High Purity Human Mesenchymal Stem Cells, Andrew Burns

KGI Theses and Dissertations

Human mesenchymal stem cells are an ideal candidate for stem cell therapies. They have been researched since the 1960’s and can differentiate into many desired functional cell types without undergoing teratogenesis. However, higher yields are needed for a marketable, successful stem cell therapy. To accomplish this, cells will have to be cultured to expand them to therapeutically relevant dosages for multiple patients. Bioreactor production is an ideal method to solve this problem.

The aim of this thesis is to test and validate a novel bioreactor for the cultivation of human mesenchymal stem cells. In this work, we investigate a novel …

Development Of A Sonically Powered Biodegradable Nanogenerator For Bone Regeneration, Avi S. Patel

University Scholar Projects

Background: Reconstruction of bone fractures and defects remains a big challenge in orthopedic surgery. While regenerative engineering has advanced the field greatly using a combination of biomaterial scaffolds and stem cells, one matter of difficulty is inducing osteogenesis in these cells. Recent works have shown electricity’s ability to promote osteogenesis in stem cell lines when seeded in bone scaffolds; however, typical electrical stimulators are either (a) externally housed and require overcomplex percutaneous wires be connected to the implanted scaffold or (b) implanted non-degradable devices which contain toxic batteries and require invasive removal surgeries.

Objective: Here, we establish a biodegradable, piezoelectric …

Visual Contributions To Balance Control During Gait, Kyle Brozek

UNO Student Research and Creative Activity Fair

We propose to isolate the contributions of continuous OF to the orthogonal relationship between balance and gait control during treadmill walking using a series of conditions. Manipulating the direction of OF using a CAREN (Motek Medical, Amsterdam, Netherlands) virtual reality treadmill environment will isolate these visual contributions in human subjects as they walk. We plan to tease out the effect of OF direction on the relationship between gait and balance control by having healthy young adults perform a series of treadmill walking trials while immersed in a VR environment. This will be done by manipulating the direction of walking and …