Biochemistry, Biophysics, and Structural Biology Commons^™

Glucocorticoids Modulate Gastrointestinal Microbiome In A Wild Bird., José C Noguera, Manuel Aira, Marcos Pérez-Losada, Jorge Domínguez, Alberto Velando

Computational Biology Institute

It has recently been hypothesized that stress exposure (e.g. via glucocorticoid secretion) may dysregulate the bacterial gut microbiome, a crucial 'organ' in animal health. However, whether stress exposure (e.g. via glucocorticoid secretion) affects the bacterial gut microbiome of natural populations is unknown. We have experimentally altered the basal glucocorticoid level (corticosterone implants) in a wild avian species, the yellow-legged gull

Discovery And Effects Of Pharmacological Inhibition Of The E3 Ligase Skp2 By Small Molecule Protein-Protein Interaction Disruptors, John K. Morrow

Dissertations and Theses (Open Access)

Skp2 (S-phase kinase-associated protein 2), one component of the SCF E3 ubiquitin ligase complex, directly interacts with Skp1 and indirectly associates with Cullin1 and Rbx1 to bridge the E2 conjugating enzyme with its protein substrate to execute its E3 ligase activity. Skp2 is an Fbox protein (due to it containing an Fbox domain) and it is the rate-limiting component of the SCF complex. Skp2 targets several cell-cycle regulatory proteins for ubiquitination and degradation; most notable and significant for cancer are the cyclin-dependent kinase inhibitor, p27. Skp2 is an oncogene and studies have shown that over-expression of Skp2 leads to increased …

Killi-Data News (Winter), Tyrone Genade

Killifish Research Review

Valued readers, it is with a heavy heart that I inform you that this is the last issue of Killi-Data News. The good news is that we will be back as Killifish Research Review. The dissolution of Killi-Data International created a prob- lem: how can the newsletter of a defunct organization live on without that organization? But other additional problems were building in the background. The first issue numbered 15 pages. The previous issue was 28 pages. The number of killifish related papers is increasing while time on our end (the editorial team) is running out. It takes a lot …

Killi-Data News (Fall), Tyrone Genade

Killifish Research Review

Many interesting papers have been published over the last three months. The large volume of papers coupled with the start of the new college semester (and the workload it brings) delayed this issue of Killi-Data News. But better late than never—or so I hope! In this issue Richard van der Laan provides an insightful review of the recent Aphanius papers as to their taxonomic implications and questions. The systematic issues he raises show the importance of the Molecular project: we need to get more samples of the various cyprinodontiforme families to resolve unsettled systematic and taxonomic issues. In the Next …

Killi-Data News (Summer), Tyrone Genade

Killifish Research Review

Over the last three months several interesting and exciting pa- pers have been published. By now most of you have heard the Nothobranchius fish poo news emanating from the Valenzano lab. That paper is reviewed and certainly has repercussions for the health of our captive fish. Polaçik et al have published interesting data with ramifications as to how we breed and incubate annual killifish. The big news in this issue is the paper from the Reznick lab which Jean Huber reviews. The contents of that paper goes to the heart of the question of just what a killifish is. The …

Killi-Data News (Spring), Tyrone Genade

Killifish Research Review

This is the start of Killi-Data News’ second year. In this first issue of the year we have the usual review of research pub- lications as well as input from Martin Reichard on his lab’s Nothobranchius research. Martin is responding to my reviews of his lab’s work in the previous edition. I am serious about making sure the content in this newsletter is reliable but I erred in the previous edition and Martin has written extensively to correct my mistake in the section “Erratum”. This reply is welcomed and owed to readers. I must confess that I don’t know everything …

Killi-Data News (Winter), Tyrone Genade

Killifish Research Review

This is the fourth edition, and concluding issue of the first volume, of Killi-Data News and I am happy that it has been well received by readers. At 25 pages this issue is a bit thin- ner than the last but this is because we agreed to make the cut-off for submissions the 1 st of December so we could get this edition out by the New Year. This is an exciting edition full of new species descrip- tions and analyses that will keep taxonomists busy for years to come. Costa has given us two molecular phylogenies on Melanorivulus as …

Killi-Data News (Spring), Tyrone Genade

Killifish Research Review

This is the start of Killi-Data News’ second year. In this first issue of the year we have the usual review of research pub- lications as well as input from Martin Reichard on his lab’s Nothobranchius research. Martin is responding to my reviews of his lab’s work in the previous edition. I am serious about making sure the content in this newsletter is reliable but I erred in the previous edition and Martin has written extensively to correct my mistake in the section “Erratum”. This reply is welcomed and owed to readers. I must confess that I don’t know everything …

Copy Number Variation In The Porcine Genome Detected From Whole-Genome Sequence, Rebecca Anderson

Honors Program: Senior Projects (Public)

Copy number variations (CNVs) are large insertions, deletions, and duplications in the genome that vary between individuals in a species. These variations are known to impact a broad range of phenotypes from molecular-level traits to higher-order clinical phenotypes. CNVs have been linked to complex traits in humans such as autism, attention deficit hyperactivity disorder, nervous system disorders, and early-onset extreme obesity. In this study, whole-genome sequence was obtained from 72 founders of an intensely phenotyped experimental swine herd at the U.S. Meat Animal Research Center (USMARC) in Clay Center, Nebraska. This included 24 boars (12 Duroc and 12 Landrace) and …

Studies Of Amino Acid Mutations In Drug Resistance Of The Smo Protein, Eunice Wintona

UNO Student Research and Creative Activity Fair

Smoothened receptor (SMO) is a protein that in humans, is encoded by the SMO gene. A systemic mutation in its binding pocket helps predict the sensitivity of mutant proteins to different drugs. Known as a GPCR-like receptor, it is a component of the hedgehog signaling pathway; a pathway involved in body patterning and the regulation of adult stem cells. An uncontrolled or inappropriate activation of the Hedgehog pathway drives tumor progression in cancers and a number of birth defects. To achieve these goals, the molecular modeling software MOE was used to build small molecules and drug molecules like Vismodegib and …

Model File Name: 1ehz-Trna(Thick).Stl, Michelle Howell, Karin Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1ehz-tRNA(thick).stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of Phe-tRNA in a thick stick-representation (PDB: 1ehz), designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com under the name “tRNA-Phe small”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following materials: Strong & Flexible Plastic and Elasto Plastic.

Model File Name: 1lmb-Dbd-Tfmono.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1lmb-DBD-TFmono.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of the DNA binding domain of a Lambda repressor transcription factor monomer that accompanies the full color DNA helix (PDB: 1lmb). It is in a cartoon ribbon representation with key amino acid residues in stick representation to highlight interactions with the DNA. This model is designed to accompany a teaching module illustrating transcription factor-DNA binding. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Lambda TF DBD”. This model has been printed …

Model File Name: 1ehz-Trna(Thin-Big).X3d, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1ehz-tRNA(thin-big).x3d

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of Phe-tRNA in a large, but thin stick-representation (PDB: 1ehz), designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Full color Phe-tRNA (1ehz)”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following material: Strong & Flexible Plastic.

Model File Name: 1lmb-Dnalong_Fordimer-Test6b.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1lmb-DNAlong_fordimer-test6b.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of the 19-bp segment of DNA to which Lambda repressor transcription factor interacts (PDB: 1lmb). It is in a stick representation and has been designed with sites to add magnets to illustrate binding interactions with the transcription factor. Sphere magnets with a 1/8” diameter can be purchased separately from K&J Magnets. The model can interact with the dimer form of the transcription factor. This model is designed to accompany a teaching module illustrating transcription factor-DNA binding. The printable model …

Model File Name: 1lmb-Tfdimer-Mags-Joints-Jnd-Sc1-8-Parts-V4b.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1lmb-TFdimer-mags-joints-jnd-sc1-8-parts-v4b.stl

Additional files: 1lmb-Lys-Ser-extras-v4b.stl and 1lmb-TFdimer-Leu-v4b.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a ribbon and stick representation of the transcription factor lambda repressor (PDB: 1lmb). Key amino acid residues are in stick representation to illustrate the interactions between the repressor and the DNA to which it binds. Some of these residues have been designed with sites to add magnets to illustrate these interactions. Sphere magnets with a 1/8” diameter can be purchased separately from K&J Magnets. Some of the residues can be interchanged with other …

Model File Name: Dna-294bp-Magnet-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-294bp-magnet-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (294 bp). The DNA model has small sites on the ends where the user can glue magnets to mimic circular DNA, and to aid in manipulating the model. Disc magnets with a diameter of 1/8” or 1/10” and thickness of 1/16” can be purchased online from K&J Magnetics and glued into the magnet sites. The model is designed to go with a teaching module on DNA supercoiling. The model can …

Model File Name: Dna-294bp-Handle-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-294bp-handle-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (294 bp). The DNA model has small handles on the ends to aid in holding and manipulating the model. The model is designed to go with a teaching module on DNA supercoiling. The model can be accompanied by Nucleosome and H1 histone models to demonstrate DNA packaging in the cell. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “294bp DNA (handles)”. …

Model File Name: Dna-420bp-Handle-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-420bp-handle-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (420 bp). The DNA model has small handles on the ends to aid in holding and manipulating the model. The model is designed to go with a teaching module on DNA supercoiling. The model can be accompanied by Nucleosome and H1 histone models to demonstrate DNA packaging in the cell. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “420bp DNA (handles)”. …

Model File Name: Dnalong-3pc-Lego.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNAlong-3pc-Lego.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a stick representation of the DNA to which the transcription factor lambda repressor binds (PDB: 1lmb). This model can be adapted to accompany a teaching module illustrating transcription factor-DNA binding. The model has been designed in 3 parts that can be joined together by Lego®-style junctions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Lego DNA with GCbp”. This model has been printed successfully using these parameters on Shapeways’ laser …

Model File Name: Dna-420bp-Magnet-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-420bp-magnet-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (420 bp). The DNA model has small sites on the ends where the user can glue magnets to mimic circular DNA, and to aid in manipulating the model. Disc magnets with a diameter of 1/8” or 1/10” and thickness of 1/16” can be purchased online from K&J Magnetics and glued into the magnet sites. The model is designed to go with a teaching module on DNA supercoiling. The model can …

Model File Name: H1-Protein.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: H1-protein.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a crude representation of an H1-protein intended to accompany the nucleosome and a long, thin double stranded DNA helix model in order to illustrate DNA packaging and supercoiling. This model is designed to go with a teaching module on DNA supercoiling. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Histone H1 protein”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following materials: Strong …

Model File Name: Dna-Short-Helix.X3d, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-short-helix.x3d

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a DNA helix in which the atoms are colored by heteroatom (PDB: 1lmb). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions, and with one that studies transcription factor-DNA binding. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “DNA helix - polynucleotide molecule”. This model has been printed successfully using these parameters on Shapeways’ binder jetting printer in the Coated Full …

Model File Name: Ssdna.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: ssDNA.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a single stranded piece of DNA in stick representation (PDB: 1ehz). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “ssDNA”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Elasto Plastic material.

Model File Name: Nucleosome.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: Nucleosome.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a crude representation of a nucleosome intended to accompany the H1 histone protein and a long, thin double stranded DNA helix model in order to illustrate DNA packaging and supercoiling. This model is designed to go with a teaching module on DNA supercoiling. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Nucleosome”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Strong & Flexible …

Model File Name: Tf-Monomer-Stick.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: TF-monomer-stick.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a ribbon and stick representation of a Lambda repressor transcription factor monomer that accompanies the full color DNA helix (PDB: 1lmb). This model is designed to go with a teaching module illustrating transcription factor-DNA binding. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Lambda TF monomer”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Strong & Flexible Plastic material.

Model File Name: Rna-Short-Helix.X3d, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: RNA-short-helix.x3d

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a DNA helix in which the atoms are colored by heteroatom (PDB: 1lmb). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “RNA helix - polynucleotide molecule”. This model has been printed successfully using these parameters on Shapeways’ binder jetting printer in the Coated Full Color Sandstone material.

Video Guide To Design Flexible Dna.Mp4, Michelle Howell, Karin V. Van Dijk, Christine S. Booth, Tomáš Helikar, Brian Couch, Rebecca Roston

3-D Printed Model Structural Files

Model file name: Video guide to design flexible DNA.mp4

Authors: Michelle E Howell, Karin van Dijk, Christine S Booth, Tomas Helikar, Brian A Couch, Rebecca L Roston

This 30-minute video includes step-by-step instructions to design and 3-D print a long flexible DNA model that mimics the structure and function of DNA. The instructions are applicable for designing the model using open-source 3-D computer graphics software Blender 2.79 which is available for download at https://www.blender.org/download/.

.mp4 file download (70 MB) below.

Model File Name: Ssrna.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: ssRNA.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a single stranded piece of RNA in stick representation (PDB: 1ehz). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “ssRNA”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Elasto Plastic material.

Model File Name: Helix_H2o_Sphere2.Dae, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

Model file name: Helix_H2O_sphere2.dae

Authors: Michelle E Howell, Rebecca L Roston

This is a teaching model of a space fill representation of a protein α-helix (PDB: 3vjo). A space fill water molecule is also represented to illustrate the lack of space down the axis of an α-helix. This model can accompany a corresponding stick representation, a kinked α-helix, and a β-sheet. This model is designed to accompany a teaching module illustrating protein secondary structure and function. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Helix and Water (Space-fill) …

Model File Name: Beta-Sheet_Rod 0.7.Dae, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

Model file name: beta-sheet_rod 0.7.dae

Authors: Michelle E Howell, Rebecca L Roston

This is a teaching model of a stick representation of a protein β-sheet (PDB: 3vjo). This model is designed to accompany three other α-helix models: a space-fill representation of a straight α-helix, a stick representation of a straight α-helix, and a stick representation of a kinked α-helix. These models accompany a teaching module illustrating protein secondary structure and function. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Beta-sheet_Thick”. This model has been printed successfully using …